首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 531 毫秒
1.
Bowers Swell is a newly discovered bathymetric feature which is up to 90 m high, between 12 and 20 km wide, and which extends arcuately about 400 km along the northern and eastern sides of Bowers Ridge. The swell was first revealed on GLORIA sonographs and subsequently mapped on seismic reflection and 3.5 kHz bathymetric profiles. These geophysical data show that the swell caps an arcuate anticlinal ridge, which is composed of deformed strata in an ancient trench on the northern and eastern sides of Bowers Ridge. The trench fill beneath the swell is actively deforming, as shown by faulting of the sea floor and by thinning of the strata across the crest of the swell. Thinning and faulting of the trench strata preclude an origin for the swell by simple sediment draping over an older basement high. We considered several models for the origin of Bowers Swell, including folding and uplift of the underlying trench sediment during the interaction between the Pacific plate beneath the Aleutian Ridge and a remnant oceanic slab beneath Bowers Ridge. However, such plate motions should generate extensive seismicity beneath Bowers Ridge, which is aseismic, and refraction data do not show any remnant slab beneath Bowers Ridge. Another origin considered for Bowers Swell invokes sediment deformation resulting from differential loading and diapirism in the trench fill. However, diapirism is not evident on seismic reflection profiles across the swell. We favour a model in which sediment deformation and swell formation resulted from a few tens of kilometers of low seismicity motion by intraplate crustal blocks beneath the Aleutian Basin. This motion may result from the translation of blocks in western Alaska to the south-west, forcing the movement of the Bering Sea margin west of Alaska into the abyssal Aleutian Basin.  相似文献   

2.
The northeastern part of the South China Sea is a special region in many aspects of its tectonics. Both recent drilling into the Mesozoic and new reflection seismic surveys in the area provide a huge amount of data, fostering new understanding of the continental margin basins and regional tectonic evolution. At least four half-grabens are developed within the Northern Depression of the Tainan Basin, and all are bounded on their southern edges by northwestward-dipping faults. One of the largest half-grabens is located immediately to the north of the Central Uplift and shows episodic uplift from the late Oligocene to late Miocene. Also during that period, the Central Uplift served in part as a material source to the Southern Depression of the Tainan Basin. The Southern Depression of the Tainan Basin is a trough structure with deep basement (up to 9 km below sealevel or 6 km beneath the sea bottom) and thick Cenozoic sedimentation (>6 km thick). Beneath the Southern Depression we identified a strong landward dipping reflector within the crustal layer that represents a significant crustal fault. This reflector coincides with a sharp boundary in crustal thicknesses and Moho depths. We show that the northeasternmost South China Sea basin, which may have undergone unique evolution since the late Mesozoic, is markedly different from the central South China Sea basin and the Huatung Basin, both geologically and geophysically. The Cenozoic evolution of the region was largely influenced by pre-existing weaknesses due to tectonic inheritance and transition. The South China Sea experienced multiple stages of Cenozoic extension.  相似文献   

3.
The Kyushu-Palau Ridge(KPR), a remnant arc on the Philippine Sea Plate(PSP), is subducting beneath the Kyushu, southwest Japan. Influenced by the subducting KPR, the Kyushu subduction zone corresponding to the KPR is significantly different from Shikoku subduction zone in terms of gravity anomalies, seismicity, the stress state, and the subducting slab morphology. Significant negative free-air and Bouguer gravity anomalies are observed in a prolonged area of KPR, southeast of the Miyazaki Plain, indicating that this is where KPR overlaps the overriding plate. The gravity anomaly in this area is much lower than that in other areas where the inferred KPR extends, suggesting that the subduction of the buoyant KPR may cause the lower mantle density to decrease.More earthquakes have occurred in Hyuga-nada region where the KPR subducts than in Shikoku forearc and other areas in the Kyushu forearc, indicating that the subduction of the KPR enhances the local coupling between the subducting and overriding plates. The centroid moment tensor(CMT) mechanism of earthquakes shows that stress is concentrated in the accumulated crust beneath the Kyushu forearc corresponding to the KPR, and the shallow thrusting events in the obducting plate are caused by the KPR subduction. The buoyant KPR, with a large volume of low-density sediments, was responsible for the differences of the subduction depth and dip angle of the subducting Philippine Sea(PS) slab between northern Kyushu and Shikoku. The seismic gaps and the sudden change of the dipping angle of the subducting PS slab indicate that slab tear may have occurred along the west side of the KPR beneath southwest Kyushu. A two-tear model was proposed, and the subduction of the buoyant KPR was believed to play an important role in the slab tear.  相似文献   

4.
The Malay Basin is located offshore West Malaysia in the South China Sea, within north central region of 1st order Sunda Block. The basin developed partly as a result of tectonic collisions and strike-slip shear of the Southeast Asia continental slabs, as the Indian Plate collided into Eurasia, and subsequent extrusion of lithospheric blocks towards Indochina. The Sunda Block epicontinental earliest rift margins were manifested by the Palaeogene W–E rift valleys, which formed during NW–SE sinistral shear of the region. Later Eocene NW–SE dextral shear of (2nd order) Indochina Block against East Malaya Block rifted open a 3rd order Malay Basin. Developed within it is a series of 4th order N–S en-echelon ridges and grabens. The grabens and some ridges, sequentially, host W–E trending 5th order folds of later compressional episodes. The Malay Basin Ridge and Graben Model explains the multi-phased structural deformation which started with, the a) Pre-Rift Palaeo/Mesozoic crystalline/metamorphic Basement, b) Synrift phase during Paleogene, c) Fast Subsidence from Late Oligocene to Middle Miocene, d) Compressional inversion of first Sunda fold during Late Miocene, and e) Basin Sag during Plio-Pleistocene with mild compressional episodes. The subsequent Mio-Pliocene folding history of Malay Basin is connected to the collision of Sunda Block against subducting Indian–Australian Plate. This Neogene Sunda tectonics, to some degree after the cessation of South China Sea spreading, is due to the diachronous collision along the 1st order plate margins between SE Asia and Australia.  相似文献   

5.
A key consideration in tectonic models for SE Asia and opening of the South China Sea is the role that the West Baram and Tinjar Lines of NW Borneo may have played in accommodating the motion of crustal blocks displaced from Asia following India's collision. There are few studies that focus on these “lines”. Using onshore geological studies and offshore seismic data to address the origin and tectonic significance of these, this paper concludes that rather than a major transform boundary between Luconia and the Dangerous Grounds, the West Baram Line marks the boundary between domains of continental crust that underwent differential extension in the Eocene. The Baram Basin is underlain by hyperextended continental crust on the NE side of the Baram Line. The strong contrast in the geological features across the Tinjar and West Baram Lines likely reflects ancient differences in crustal rheology with Luconia being the more rigid block. Although lack of significant strike slip faulting along the West Baram Line poses problems for tectonic models in which a wide proto-South China Sea is subducted beneath NW Borneo, intra-plate deformation, such as partial inversion of the Dangerous Grounds rift, offers a potential mechanism to mass balance blocks displaced from Asia with the reduced strike slip motion along the West Baram Line.  相似文献   

6.
A key consideration in tectonic models for SE Asia and opening of the South China Sea is the role that the West Baram and Tinjar Lines of NW Borneo may have played in accommodating the motion of crustal blocks displaced from Asia following India's collision. There are few studies that focus on these “lines”. Using onshore geological studies and offshore seismic data to address the origin and tectonic significance of these, this paper concludes that rather than a major transform boundary between Luconia and the Dangerous Grounds, the West Baram Line marks the boundary between domains of continental crust that underwent differential extension in the Eocene. The Baram Basin is underlain by hyperextended continental crust on the NE side of the Baram Line. The strong contrast in the geological features across the Tinjar and West Baram Lines likely reflects ancient differences in crustal rheology with Luconia being the more rigid block. Although lack of significant strike slip faulting along the West Baram Line poses problems for tectonic models in which a wide proto-South China Sea is subducted beneath NW Borneo, intra-plate deformation, such as partial inversion of the Dangerous Grounds rift, offers a potential mechanism to mass balance blocks displaced from Asia with the reduced strike slip motion along the West Baram Line.  相似文献   

7.
During basin burial, interstitial fluids initially trapped within the sedimentary pile easily move under thermal and pressure gradients. As the main mechanism is linked to fluid overpressure, such fluids play a significant role on frictional mechanics for fault reactivation and sediment deformation.The Lodève Permian Basin (Hérault, France) is an exhumed half-graben with exceptional outcrop conditions providing access to barite-sulfide mineralized systems and hydrocarbon trapped into syn-rift roll-over faults. Architectural studies show a cyclic infilling of fault zone and associated bedding-parallel veins according to three main fluid events during dextral/normal faulting. Contrasting fluid entrapment conditions are deduced from textural analysis, fluid inclusion microthermometry and sulfur isotope geothermometer. We conclude that a polyphase history of trapping occurred during Permian syn-rift formation of the basin.The first stage is characterized by an implosion breccia cemented by silicifications and barite during an abrupt pressure drop within fault zone. This mechanism is linked to the dextral strike-slip motion on faults and leads to a first sealing of the fault zone by basinal fluid mineralization.The second stage consists of a succession of barite ribbons precipitated under overpressure fluctuations, derived from fault-valve action. This corresponds to periodic reactivations of fault planes and bedding-controlled opening localized at sulphide-rich micro-shearing structures showing a normal movement. This process formed the main mineralized ore bodies by the single action of fluid overpressure fluctuations undergoing changes in local stress distribution.The last stage is associated with the formation of dextral strike-slip pull-apart infilled by large barite and contemporaneous hydrocarbons under suprahydrostatic pressure values. This final tectonic activation of fault is linked to late basinal fluids and hydrocarbon migration during which shear stress restoration on the fault plane is faster than fluid pressure build-up.This integrated study shows the interplay action between tectonic stress and fluid overpressure in fault reactivation during basin burial that clearly impact potential economic reservoirs.  相似文献   

8.
Tectonic setting of the Azores Plateau deduced from a OBS survey   总被引：1，自引：0，他引：1  
Miranda  J.M.  Mendes Victor  L.A.  Simões  J.Z.  Luis  J.F.  Matias  L.  Shimamura  H.  Shiobara  H.  Nemoto  H  Mochizuki  H.  Hirn  A.  Lépine  J.C. 《Marine Geophysical Researches》1998,20(3):171-182
The studies of Azores seismicity generally show shocks with either normal faulting or right-lateral strike-slip along the ESE direction, compatible with a eastward relative motion of the Eurasian (EU) relative to the African (AF) plate. However, the 1 January 1980 earthquake was interpreted as a clear left-lateral strike-slip shock along the N150E direction. This pattern is difficult to explain in terms of the relative motion between the EU, AF and North American (NA) plates: all available models for the present day movement of this triple junction fail to explain the regional variability in the stress conditions of the area. Here we present data from a 34-day long Ocean Bottom Seismograph array deployment. We show that the seismicity is distributed along a band aligned with the island chain itself, and is concentrated along several faults with an approximate N150E strike, cutting the Azores plateau in all the area covered by the OBS network. The combination of these new results with other geophysical data permits us to conclude that the tectonic setting of the Azores plateau is characterised by the existence of two sets of faults, in the N120E and N150E directions, defining several crustal blocks, whose relative motion accommodates the interaction of the three megaplates. The deformation of these tectonic blocks is probably driven by the shear between the EU and AF plates. This model explains well the spatial variability of the stress conditions in the Azores domain, the combination of dextral and sinistral strike slip mechanisms and the observed seismotectonics of the Azores islands.  相似文献   

9.
Fault patterns at outer trench walls   总被引：1，自引：0，他引：1  
Profiles across subduction-related trenches commonly show normal faulting of the outer trench wall. Such faulting is generally parallel or sub-parallel to the trench and is ascribed to tension in the upper part of the oceanic plate as it is bent into the subduction zone. A number of authors have noted that outer trench wall faulting may involve re-activation of the oceanic spreading fabric of the subducting plate, even when the trend of this fabric is noticeably oblique to the extensional stress direction. However, one previous review of outer trench wall fault patterns questioned the occurrence of a consistent link between fault orientation and such controlling factors. This latter study predated the widespread availability of swath bathymetry and longrange sidescan sonar data over trenches. Based only on profile data, it was unable to analyse fault patterns with the accuracy now possible. This paper therefore re-examines the relationship between outer trench wall faulting and the structure of the subduction zone and subducting plate using GLORIA and Seabeam swath mapping data from several locations around the Pacific and Indian Oceans. The principal conclusions is that the trend of outer trench wall faults is almost always controlled by either the subducting slab strike or by the inherited oceanic spreading fabric in the subducting plate. The latter control operates when the spreading fabric is oblique to the subducting slab strike by less than 25–30°; in all other cases the faults are parallel to slab strike (and parallel or sub-parallel to the trench). Where the angle between spreading fabric and slab strike is close to 30°, two fault trends may coexist; evidence from the Aleutian Trench indicates a gradual change from spreading fabric to slab strike control of fault trend as the angle between the two increases from 25 to 30°. The only observed exception to the above rule of fault control comes from the western Aleutian Trench, where outer trench wall faults are oblique to the slab strike, almost perpendicular to the spreading fabric, and parallel to the convergence direction. Re-orientation of the extensional stress direction due to right-lateral shear at this highly oblique plate boundary is the best explanation of this apparently anomalous observation.  相似文献   

10.
Seismic reflection data imaging conjugate crustal sections at the South China Sea margins result in a conceptual model for rift-evolution at conjugate magma-poor margins in time and space.The wide Early Cenozoic South China Sea rift preserves the initial rift architecture at the distal margins. Most distinct are regular undulations in the crust–mantle boundary. Individual rift basins are bounded to crustal blocks by listric normal faults on either side. Moho uplifts are distinct beneath major rift basins, while the Moho is downbended beneath crustal blocks, with a wavelength of undulations in the crust–mantle boundary that approximately equals the thickness of the continental crust. Most of the basin-bounding faults sole out within the middle crust. At the distal margins, detachment faults are located at a mid-crustal level where a weak zone decouples crust and mantle lithosphere during rifting. The lower crust in contrast is interpreted as being strong. Only in the region within about 50 km from the Continent–Ocean Transition (COT) we suggest that normal faults reach the mantle, enabling potentially a coupling between the crust and the mantle. Here, at the proximal margins detachment fault dip either seaward or landward. This may indicate the presence of exhumed mantle bordering the continental margins.Post-rift shallow-water platform carbonates indicate a delay in subsidence during rifting in the South China Sea. We propose that this is an inherent process in highly extended continental margins and a common origin may be the influx of warm asthenospheric material into initially cool sub-lithospheric mantle.On a crustal-scale largely symmetric process predominate in the initial rifting stage. At the future COT either of the rift basin-bounding faults subsequently penetrates the entire crust, resulting in asymmetry at this location. However, asymmetric deformation which is controlled by large scale detachment faulting is confined to narrow areas and does not result in a margin-wide simple-shear model. Rather considerable along-margin variations are suggested resulting in alternating “upper and lower plate” margins.  相似文献   

11.
日本九州俯冲带是菲律宾海板块与欧亚板块汇聚边界上一个独具特色的区域, 也是研究俯冲带内板块构造作用的理想场所。为了解该俯冲带内的板间应力状态和相互作用, 本研究利用震源深度大于20km的97251个地震事件, 通过b值计算详细刻画了该俯冲板片上表面以及垂直海沟走向的剖面特征。结果发现, b值表现出明显的空间变化, 整体上沿南海海槽和琉球海沟从东北往西南方向逐渐增大, 同时在俯冲的九州-帕劳海脊上存在显著的低值区。从b值与应力的负相关性推断, 进入俯冲带的海脊以及海脊东北侧的四国海盆洋壳与俯冲带上覆板片耦合作用较强; 而在海脊西南侧, 俯冲带内汇聚板片的耦合作用相对较弱。究其原因, 本文认为九州-帕劳海脊两侧俯冲洋壳在形成时代和汇聚速率上的差异起着重要作用。对于九州-帕劳海脊来说, 俯冲带浅部的低b值区主要是由于隆起的海脊增强了与上覆板块的耦合作用。随着俯冲深度的增加和俯冲板片倾角的急剧变陡, 沿海脊可能发生了板片撕裂, 从而释放了海脊与上覆板片间的挤压-剪切应力, 使耦合程度大大减弱。  相似文献   

12.
The South China Sea (SCS) is a marginal sea off shore Southeast Asia. Based on magnetic study, oceanic crust has been suggested in the northernmost SCS. However, the crustal structure of the northernmost SCS was poorly known. To elaborate the crustal structures in the northernmost SCS and off southwest Taiwan, we have analyzed 20 multi-channel seismic profiles of the region. We have also performed gravity modeling to understand the Moho depth variation. The volcanic basement deepens southeastwards while the Moho depth shoals southeastwards. Except for the continental margin, the northernmost SCS can be divided into three tectonic regions: the disturbed and undisturbed oceanic crust (8–12 km thick) in the southwest, a trapped oceanic crust (8 km thick) between the Luzon-Ryukyu Transform Plate Boundary (LRTPB) and Formosa Canyon, and the area to the north of the Formosa Canyon which has the thickest sediments. Instead of faulting, the sediments across the LRTPB have only displayed differential subsidence offset of about 0.5–1 s in the northeast side, indicating that the LRTPB is no longer active. The gravity modeling has shown a relatively thin crust beneath the LRTPB, demonstrating the sheared zone character along the LRTPB. However, probably because of post-spreading volcanism, only the transtension-shearing phenomenon of volcanic basement in the northwest and southeast ends of the LRTPB can be observed. These two basement-fractured sites coincide with low gravity anomalies. Intensive erosion has prevailed over the whole channel of the Formosa Canyon.  相似文献   

13.
A 1987 survey of the offshore Peru forearc using the SeaMARC II seafloor mapping system reveals that subduction of the Nazca Ridge has resulted in uplift of the lowermost forearc by as much as 1500 m. This uplift is seen in the varied depths of two forearc terraces opposite the subducting ridge. Uplift of the forearc has caused fracturing, minor surficial slumping, and increased erosion through small canyons and gullies. Oblique trending linear features on the forearc may be faults with a strike-slip component of motion caused by the oblique subduction of the Nazca Ridge. The trench in the zone of ridge subduction is nearly linear, with no re-entrant in the forearc due to subduction of the Nazca Ridge. Compressional deformation of the forearc due to subduction of the ridge is relatively minor, suggesting that the gently sloping Nazca Ridge is able to slide beneath the forearc without significantly deforming it. The structure of the forearc is similar to that revealed by other SeaMARC II surveys to the north, consisting of: 1) a narrow zone (10 to 15 km across) of accreted material making up the lower forearc; 2) a chaotic middle forearc; 3) outcropping consolidated material and draping sediment on the upper forearc; and 4) the smooth, sedimented forearc shelf.The subducting Nazca plate and the Nazca Ridge are fractured by subduction-induced faults with offsets of up to 500 m. Normal faulting is dominant and begins about 50 km from the trench axis, increasing in frequency and offset toward the trench. These faults are predominantly trench-parallel. Reverse faults become more common in the deepest portion of the trench and often form at slight angles to the trench axis.Intrusive and extrusive volcanic areas on the Nazca plate appear to have formed well after the seafloor was created at the ridge crest. Many of the areas show evidence of current scour and are cut by faulting, however, indicating that they formed before the seafloor entered the zone of subduction-induced faulting.  相似文献   

14.
The area reviewed covers the Mid-Norway continental margin between latitudes 62°N and 68°N. Main structural elements, as defined at the base Cretaceous level, are the Tröndelag Platform, underlying the inner shelf, the Möre and Vöring Basins, located beneath the outer shelf and slope, and the Möre Platform and the Outer Vöring Plateau, forming a base of slope trend of highs. Sediments contained in the Mid-Norway Basin range in age from Late Palaeozoic to Cenozoic. The basement was consolidated during the Caledonian orogenic cycle. Devonian and Early Carboniferous wrench movements along the axis of the Arctic-North Atlantic Caledonides are thought to have preceded the Namurian onset of crustal extension. Rifting processes were intermittently active for some 270 My until crustal separation between Greenland and Fennoscandia was achieved during the Early Eocene. During the evolution of the Norwegian-Greenland Sea rift system a stepwise concentration of tectonic activities to its axial zone (the area of subsequent continental separation) is observed. During the Late Palaeozoic to Mid-Jurassic a broad zone was affected by tensional faulting. During the Late Jurassic and Cretaceous the Tröndelag Platform was little affected by faulting whilst major rift systems in the Möre and Vöring Basins subsided rapidly and their shoulders became concomitantly upwarped. During the latest Cretaceous and Early Palaeogene terminal rifting phase only the western Möre and Vöring Basins were affected by intrusive and extrusive igneous activity. Following the Early Eocene crustal separation and the onset of sea floor spreading in the Norwegian-Greenland Sea, the Vöring segment of the Mid-Norway marginal basin subsided less rapidly than the Möre segment. During the Early and Mid Tertiary, minor compressional deformations affected the Vöring Basin and to a lesser degree the Möre Basin. Tensional forces dominated the Late Palaeozoic to Early Cenozoic evolution of the Mid-Norway Basin and effected strain mainly in the area where the crust was weakened by the previous lateral displacements. The lithosphere thinned progressively and the effects of the passively upwelling hot asthenospheric material became more pronounced. Massive dyke invasion of the thinned crust preceded its rupture.  相似文献   

15.
阳江-一统东断裂是珠江口盆地西部一条重要的NW向区域大断裂，是盆地东西分块的重要分界线。南海北部陆缘在新生代经历了大陆裂谷-裂离-海底扩张-热沉降的过程，阳江-一统东断裂在新生代的活动是这一复杂过程的一部分。对分处断裂两侧的从陆架延伸至洋陆边界的两条NNW向多道地震剖面进行了地质解释，研究了珠江口西部的构造和沉积特征。利用2D-Move软件及构造回剥法建立了平衡剖面模型，计算了断层活动速率，结合构造位置、构造演化史、标志构造和应力分析推断了阳江-一统东断裂在新生代的活动史。结果表明，阳江-一统东断裂可以中部坳陷带为界分为两段，从65Ma到32Ma，断裂整体表现为左旋活动，继承了断裂在中生代时期的先存左旋走滑，其中，在此时期断裂南段主要表现为伸展活动，伴随着轻微的左旋走滑，这种伸展活动控制了云开低凸起的形成和演化；从32Ma到23.8Ma，断裂北段的左旋走滑活动持续，而南段逐渐转为轻微的右旋走滑或左旋活动停止。在23.8Ma之后，断裂南段的右旋走滑活动持续，北段的左旋走滑逐渐停止，或转为轻微的右旋走滑。阳江-一统东断裂的这种走滑旋向的转变可能与在珠江口盆地南部洋陆过渡带区域的岩浆底侵作用有关。根据对盆地构造活动强度和裂谷格架的分析，认为阳江-一统东断裂的新生代活动在珠江口盆地裂谷伸展过程中起到了应力调节的作用。  相似文献   

16.
Using a mega-regional dataset that includes over 20,000 km of on- and offshore 2D seismic lines and 12 wells, we illustrate three different stages of fault formation and basin evolution in the Caribbean arc-South American continent collisional zone. Transpressional deformation associated with oblique collision of the Caribbean arc migrates diachronously over a distance of ∼1500 km from western Venezuela in Paleogene time (∼57 Ma) to a zone of active deformation in the eastern offshore Trinidad area. Each diachronous stage of pre-, syn-, and post-collisional basin formation is accompanied by distinct patterns of fault families. We use subsidence histories from wells to link patterns of long-term basinal subsidence to periods of activity of the fault families.

Stage one of arc-continent collision

Initial collision is characterized by overthrusting of the south- and southeastward-facing Caribbean arc and forearc terranes onto the northward-subducting Mesozoic passive margin of northern South America. Northward flexure of the South American craton produces a foreland basin between the thrust front and the downward-flexed continental crust that is initially filled by clastic sediments shed both from the colliding arc and cratonic areas to the south. As the collision extends eastward towards Trinidad, this same process continues with progressively younger foreland basins formed to the east. On the overthrusting Caribbean arc and forearc terranes, north-south rifting adjacent to the collision zone initiates and is controlled by forward momentum of southward-thrusting arc terranes combined with slab pull of the underlying and subducting, north-dipping South American slab. Uplift of fold-thrust belts arc-continent suture induces rerouting of large continental drainages parallel to the collisional zone and to the axis of the foreland basins.

Stage two

This late stage of arc-continent collision is characterized by termination of deformation in one segment of the fold-thrust belt as convergent deformation shifts eastward. Rebound of the collisional belt is produced as the north-dipping subducted oceanic crust breaks off from the passive margin, inducing inversion of preexisting normal faults as arc-continent convergence reaches a maximum. Strain partitioning also begins to play an important role as oblique convergence continues, accommodating deformation by the formation of parallel, strike-slip fault zones and backthrusting (southward subduction of the Caribbean plate beneath the South Caribbean deformed belt). As subsidence slows in the foreland basins, sedimentation transitions from a marine underfilled basin to an overfilled continental basin. Offshore, sedimentation is mostly marine, sourced by the collided Caribbean terranes, localized islands and carbonate deposition.

Stage three

This final stage of arc-continent collision is characterized by: 1) complete slab breakoff of the northward-dipping South American slab; 2) east-west extension of the Caribbean arc as it elongates parallel to its strike forming oblique normal faults that produce deep rift and half-grabens; 3) continued strain partitioning (strike-slip faulting and folding). The subsidence pattern in the Caribbean basins is more complex than interpreted before, showing a succession of extensional and inversion events. The three tectonic stages closely control the structural styles and traps, source rock distribution, and stratigraphic traps for the abundant hydrocarbon resources of the on- and offshore areas of Venezuela and Trinidad.  相似文献   

17.
日本西南部的南海海槽是一个典型的俯冲系统，由菲律宾海板块向欧亚板块俯冲形成，其俯冲板片包含了九州-帕劳洋脊（KPR）、Kinan海山链、四国海盆和伊豆-小笠原岛弧（IBA）等多种地质单元。为了研究不同地质单元的板块俯冲效应，本文系统分析了南海海槽的地球物理和岩石地球化学特征。重力和热流特征显示南海海槽中部具有低的重力异常（-20–-40 mGal）和高的热流值（60–200 mW/m2），而东西两侧的热流值（20–80 mW/m2）较低。地震模拟结果显示俯冲板块的地壳厚度为5–20 km。地球化学结果表明俯冲板块的下覆地幔成分从西到东逐渐亏损。无震洋脊（如KPR、Kian海山链和Zenisu洋脊）的俯冲是控制南海海槽俯冲效应的主要因素。首先，无震洋脊的俯冲可能使上覆板块发生变形，沿着增生楔前缘出现不规则的地形凹陷。其次，无震洋脊的俯冲是大型逆冲地震的止裂体，阻碍了南海海槽1944年Mw 8.1和1946年Mw 8.3地震破裂的传播。此外，KPR和热的、年轻的四国海盆的俯冲会导致俯冲板片熔融，在日本岛弧上出现埃达克质岩浆活动，并为斑岩铜金矿床提供成矿物质。地球物理和地球化学特征的差异表明尽管IBA已经和日本岛弧发生碰撞，但作为IBA的残留弧，KPR仍然处于俯冲阶段，与日本岛弧之间有明显的地形分界，呈现单向收敛的状态。  相似文献   

18.
Most of the basins developed in the continental core of SE Asia (Sundaland) evolved since the Late Cretaceous in a manner that may be correlated to the conditions of the subduction in the Sunda Trench. By the end of Mesozoic times Sundaland was an elevated area composed of granite and metamorphic basement on the rims; which suffered collapse and incipient extension, whereas the central part was stable. This promontory was surrounded by a large subduction zone, except in the north and was a free boundary in the Early Cenozoic. Starting from the Palaeogene and following fractures initiated during the India Eurasia collision, rifting began along large faults (mostly N–S and NNW–SSE strike-slip), which crosscut the whole region. The basins remained in a continental fluvio-lacustrine or shallow marine environment for a long time and some are marked by extremely stretched crust (Phu Khanh, Natuna, N. Makassar) or even reached the ocean floor spreading stage (Celebes, Flores). Western Sundaland was a combination of basin opening and strike-slip transpressional deformation. The configuration suggests a free boundary particularly to the east (trench pull associated with the Proto-South China Sea subduction; Java–Sulawesi trench subduction rollback). In the Early Miocene, Australian blocks reached the Sunda subduction zone and imposed local shortening in the south and southeast, whereas the western part was free from compression after the Indian continent had moved away to the north. This suggests an important coupling of the Sunda Plate with the Indo-Australian Plate both to SE and NW, possibly further west rollback had ceased in the Java–Sumatra subduction zone, and compressional stress was being transferred northwards across the plate boundary. The internal compression is expressed to the south by shortening which is transmitted as far as the Malay basin. In the Late Miocene, most of the Sunda Plate was under compression, except the tectonically isolated Andaman Sea and the Damar basins. In the Pliocene, collision north of Australia propagated toward the north and west causing subduction reversal and compression in the short-lived Damar Basin. Docking of the Philippine Plate confined the eastern side of Sundaland and created local compression and uplift such as in NW Borneo, Palawan and Taiwan. Transpressional deformation created extensive folding, strike-slip faulting and uplift of the Central Basin and Arakan Yoma in Myanmar. Minor inversion affected many Thailand rift basins. All the other basins record subsidence. The uplift is responsible for gravity tectonics where thick sediments were accumulated (Sarawak, NE Luconia, Bangladesh wedge).  相似文献   

19.
南海西南次海盆被动陆缘洋陆转换带位于陆缘强烈伸展区,蕴含着岩石圈临界伸展破裂和洋盆扩张过程的丰富信息。本文利用多道地震剖面和重力异常数据,对西南次海盆被动陆缘构造单元进行划分,研究陆缘南、北部洋陆转换带结构构造特征,探讨陆缘伸展演化过程。多道地震剖面资料显示,北部洋陆转换带发育有裂陷期断陷和向海倾斜的掀斜断块;南部发育有低角度正断层控制的裂陷期断陷、海底火山以及局部隆起;从陆到洋方向,重力异常值变化明显。根据上述结果南海西南次海盆被动陆缘划分为近端带、洋陆转换带和洋盆三个构造单元,分别对应了其伸展演化过程的三个阶段：前裂谷阶段、陆缘裂陷阶段和海底扩张阶段。  相似文献   

20.
The Geodynz-sud cruise on board the R/V l'Atalante collected bathymetric, side-scan sonar and seismic reflection data along the obliquely convergent boundary between the Australian and Pacific plates southwest of the South Island, New Zealand. The survey area extended from 44°05 S to 49°40 S, covering the transition zone between the offshore extension of the Alpine Fault and the Puysegur Trench and Puysegur Ridge. Based on variations in the nature and structure of the crust on either side of the margin, the plate boundary zone can be divided into three domains with distinctive structural and sedimentary characteristics. The northern domain involves subduction of probably thinned continental crust of the southern Challenger Plateau beneath the continental crust of Fiordland. It is characterized by thick sediments on the downgoing slab and a steep continental slope disrupted by fault scarps and canyons. The middle domain marks the transition between subduction of likely continental and oceanic crust defined by a series of en echelon ridges on the downgoing slab. This domain is characterized by a large collapse terrace on the continental slope which appears to be due to the collision of the en echelon ridges with the plate margin. The southern domain involves subduction of oceanic crust beneath continental and oceanic crust. This domain is characterized by exposed fabric of seafloor spreading on the downgoing slab, a steep inner trench wall and linear ridges and valleys on the Puysegur ridge crest. The data collected on this cruise provide insights into the nature and history of both plates, and factors influencing the distribution of strike-slip and compressive strain and the evolution of subduction processes along a highly oblique convergent margin.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号