共查询到20条相似文献,搜索用时 734 毫秒
1.
《Ore Geology Reviews》1999,14(3-4):203-225
The auriferous veins at Yirisen, Masumbiri, Sierra Leone, occurring mainly in the form of sericitic quartz-sulphide lodes and stringers, are hosted in metamorphosed volcano-sedimentary assemblages invaded by at least two generations of granitic intrusions. Detailed microthermometric studies of fluid inclusions from the veins coupled with laser Raman spectroscopic analysis show that the inclusions contain aqueous fluids of variable salinity (5 to 60 wt.% NaCl equivalent) and dense carbonic fluids (pure CO2: 1.08>d>0.88 g/cm3). Optical observations and analysis on opened inclusions by scanning electron microscopy (SEM) reveal that some of the aqueous inclusions contain a number of daughter minerals: halite, sylvite, Ca-, Fe-, Mg- and possibly Li-bearing chlorides, and anhydrite; nahcolite occurs also in some of the CO2 inclusions. The SEM runs also detected a small amount of electrum, suggesting that silver might be a bi-product of the mineralisation. The aqueous and carbonic fluids remained immiscible throughout the formation and evolution of the hydrothermal veins. A few mixed (H2O+CO2) inclusions apparently resulted from accidental trapping of both fluids in the same cavity. The wide range of salinities observed in the aqueous inclusions is attributed to the mixing of relatively hot, low-salinity aqueous fluids and colder, high-salinity brines. The CO2-rich and low-salinity H2O inclusions are considered to be derived from the metamorphic decarbonation/dehydration of the greenstone pile whilst the high-salinity brines are believed to be basinal in origin. Pressure–temperature (P–T) conditions of entrapment, inferred from the intersection of representative isochores of the immiscible fluids, indicate that the formation of the veins started at T=400°C and P about 4 kbar, in the presence of the high-density CO2 and low-salinity H2O fluids. At about 200°C, pressure fluctuations (incremental opening of the vein) correspond to the trapping of the lower-density CO2 inclusions and high-salinity brines. It is proposed that the decarbonation/dehydration processes (possibly aided by later magmatic processes) expelled and mobilised the gold from the greenstone pile and concentrated it in the CO2-bearing hydrothermal fluid in the form of Au–chloride complexes. High thermal gradients are believed to have caused the upward migration of this fluid from the bottom of the greenstone pile through structurally controlled conduits. We contend that phase separation of the H2O–CO2 metamorphic fluid, aided possibly by some wall–rock alteration, most probably triggered a decrease in ligand activity and thus, precipitation of the gold into lodes. Percolation of the basinal brines is thought to have remobilised some of the gold together with some silver. 相似文献
2.
Hydrothermal Fluid Evolution Associated with Gold Mineralization at the Wenyu Mine, Xiaoqinling District, China 总被引:3,自引:0,他引:3
Neng JIANG 《Resource Geology》2000,50(2):103-112
Abstract: The Wenyu mesothermal gold deposit is located in the Xiaoqinling district about 1000 km southwest of Beijing in central China. It occurs in the Late Archean to Early Proterozoic metamorphosed volcanic and sedimentary rocks. Three distinct stages of veins have been identified: (I) gold‐poor quartz–pyrite veins, (II) gold‐rich sulfide–quartz veins, and (III) gold‐poor carbonate–quartz veins. Stage II can be subdivided into IIa and IIb. Gold typically occurs as fracture‐fillings associated with chalcopyrite and galena. Fluid inclusions were examined in quartz samples from veins of both stage I and II. Three types of fluid inclusions are identified: CO2–H2O, CO2–rich, and aqueous inclusions. The first two types are of primary in origin. The last type occurs in two ways: coexisting with CO2–H2O and CO2–rich inclusions and thus primary in origin; and occurring along late healed fractures and hence secondary in origin. CO2–H2O inclusions display progressively decreasing Th and increasing Thco2, from the highest Th (311–408C) and lowest Thco2 (average 18C) in stage I quartz through middle Th (284–358C) and ThCO2(average 25C) in stage IIa quartz to the lowest Th (275–314C) and highest ThCO2 (average 28C) in stage IIb quartz, indicating an evolving H2O–CO2–NaCl fluid system. CO2–rich and primary aqueous inclusions show consistent ThCO2 or Th with their coexistent CO2–H2O inclusions. Whereas the secondary aqueous inclusions in stage I and IIa quartz have almost the same Th and salinity as the primary aqueous inclusions in stage IIb quartz. Comparing with CO2–H2O inclusions, these non–CO2, low salinity aqueous inclusions may come from different origin, most probably meteoric water. Unlike in both stage I and IIa quartz, fluid inclusions in stage IIb do not show evidence of fluid immiscibility. The fact that most of gold is associated with stage IIa and IIb veins and not with veins of stage I which is the main stage of vein formation suggests that gold deposition occurs at the later stage of fluid immiscibility. The continuing phase separation led to the deposition of large amounts of gold at the Wenyu mine. 相似文献
3.
雪鸡坪铜矿床产于印支晚期石英二长闪长玢岩-石英闪长玢岩-石英二长斑岩复式侵入体内,为一斑岩型铜矿床。矿床形成经历了多阶段热液成矿作用,主要有微细脉浸染状黄铁矿±黄铜矿-石英、细脉状辉钼矿±黄铁矿±黄铜矿-石英及微细脉状贫硫化物-石英-方解石等。流体包裹体岩相学、显微测温、激光拉曼及碳、氢、氧同位素综合研究表明,微细脉浸染状黄铁矿±黄铜矿-石英阶段石英中主要发育含Na Cl子矿物三相及气液两相包裹体,与含矿的石英二长斑岩石英中发育的流体包裹体特征相似,表明成矿流体主要为中高温、高盐度Na Cl-H2O体系热液,可能主要来源于印支期石英二长斑岩侵入体;辉钼矿±黄铁矿±黄铜矿-石英中主要发育含CO2三相及气液两相包裹体,成矿流体为中温、低盐度Na Cl-CO2-H2O体系热液,与前者来源明显不同;贫硫化物-石英-方解石石英中主要发育气液两相包裹体,成矿流体为中低温、低盐度Na Cl-H2O体系热液,推测其可能较多来自于大气降水。因此,雪鸡坪铜矿床为不同来源、不同地球化学性质热液叠加成矿作用的结果。 相似文献
4.
Roberta L. Rudnick Lewis D. Ashwal Darrell J. Henry 《Contributions to Mineralogy and Petrology》1984,87(4):399-406
Fluid inclusions in quartz grains from five samples of high-grade rocks (two paragneisses, an amphibolite, a mafic gneiss and a tonalite dike) from the 2.7 Ga Kapuskasing structural zone (KSZ), Ontario, were examined with petrographic, microthermometric and laser Raman techniques. Three types of fluid inclusions were observed: CO2-rich, H2O-rich and mixed CO2-H2O. CO2-rich fluid inclusions are pseudosecondary or secondary in nature and are generally pure CO2; a few contain varying amounts of CH4·H2O-rich fluid inclusions are secondary in nature, contain variable amounts of dissolved salts, and generally contain daughter crystals. Mixed CO2-H2O fluid inclusions occur where trails of H2O-rich inclusions intersect trails of CO2-rich inclusions. Isochores for high density (p=1.03 g/cm3) pseudosecondary, pure CO2 inclusions intersect the lower pressure portion of the estimated P-T field for high-grade metamorphism, implying that pure CO2 was the peak metamorphic fluid. The variable CH4 content of CO2 inclusions within graphite-bearing samples suggests that CH4 was introduced locally after the formation of the CO2 inclusions; however the origin of the CH4 remains problematic. An aqueous fluid clearly penetrated the gneisses after the peak metamorphism (during uplift/erosion), forming secondary inclusions and contributing to the minor retrogressive hydration observed in these rocks. The presence of the pseudosecondary, high-density CO2 inclusions in quartz crystals in the KSZ rocks constrains the uplift/ erosion path for the KSZ to one of simultaneous decrease in pressure and temperature. 相似文献
5.
Fluid inclusions approximated by the system H2O-CO2-NaCl are common in many geologic environments. In order to apply microthermometric data from these inclusions to infer P-T (pressure-temperature) trapping conditions, the composition of the inclusions, including the salinity, must be known. Normally, salinities of aqueous inclusions are determined from ice-melting temperatures obtained during microthermometry. However, when CO2-bearing aqueous fluid inclusions are cooled they often form a hydrate that incorporates H2O into the structure, and salinities estimated from ice-melting temperatures are therefore higher than the actual salinity. A technique that combines data from Raman spectroscopic and microthermometric analyses of individual inclusions was developed to determine the salinity of CO2-bearing aqueous inclusions based on measured clathrate melting temperatures and CO2 pressures obtained from Raman analyses. In this study, the pressure within inclusions was determined using Raman spectroscopy based on the splitting of the Fermi diad of CO2, measured at the clathrate melting temperature. The CO2 densities (and pressures) predicted by the equation developed in this study are in relatively good agreement with previously published equations, except for very low densities and correspondingly low pressures. The combined Raman spectroscopy - microthermometry technique thus provides both the temperature and the pressure in the inclusion at clathrate melting. For inclusions in which the clathrate melts in the presence of CO2 liquid, the salinity can be determined with a precision of a few tenths of a wt% NaCl, whereas for inclusions in which clathrate melts in the presence of CO2 vapor the salinity error may be a few wt% NaCl. Applying the method to synthetic fluid inclusions with known salinity suggests that the technique is valid for determining salinity of H2O-CO2-NaCl fluid inclusions in which clathrate melts in the presence of liquid CO2 only or vapor CO2 only. 相似文献
6.
Fluid Inclusions in the Gold—Bearing Quartz Veins at Um Rus Area,Eastern Desert,Egypt 总被引:2,自引:0,他引:2
MOHAMEDELTOKHI ABDALLAELMUSLEM 《中国地球化学学报》2002,21(2):131-139
Fluid inclusions in the gold-bearing quartz veins at the Um Rus area are of three types: H2O, H2O−CO2 and CO2 inclusions. H2O inclusions are the most abundant, they include two phases which exhibit low and high homogenization temperatures ranging
from 150 to 200°C and 175 to 250°C, respectively. The salinity of aqueous inclusions, based on ice melting, varies between
6.1 and 8 equiv. wt% NaCl. On the other hand, H2O−CO2 fluid inclusions include three phases. Their total homogenization temperatures range from 270 to 325°C, and their salinity,
based on clathrate melting, ranges between 0.8 and 3.8 equiv. wt% NaCl. CO2 fluid inclusions homogenize to a liquid phase and exhibit a low density range from 0.52 to 0.66 g/cm3. The partial mixing of H2O−CO2 and salt H2O−NaCl fluid inclusions is the main source of fluids from which the other types of inclusions were derived. The gold-bearing
quartz veins are believed to be of medium temperature hydrothermal convective origin. 相似文献
7.
High CO2 content of fluid inclusions in gold mineralisations in the Ashanti Belt, Ghana: a new category of ore forming fluids? 总被引:4,自引:0,他引:4
Fluid inclusions were studied in samples from the Ashanti, Konongo-Southern Cross, Prestea, Abosso/Damang and Ayanfuri gold
deposits in the Ashanti Belt, Ghana. Primary fluid inclusions in quartz from mineralised veins of the Ashanti, Prestea, Konongo-Southern
Cross, and Abosso/Damang deposits contain almost exclusively volatile species. The primary setting of the gaseous (i.e. the
fluid components CO2, CH4 and N2) fluid inclusions in clusters and intragranular trails suggests that they represent the mineralising fluids. Microthermometric
and Raman spectroscopic analyses of the inclusions revealed a CO2 dominated fluid with variable contents of N2 and traces of CH4. Water content of most inclusions is below the detection limits of the respective methods used. Aqueous inclusions are rare
in all samples with the exception of those from the granite-hosted Ayanfuri mineralisation. Here inclusions associated with
the gold mineralisation contain a low salinity (<6 eq.wt.% NaCl) aqueous solution with variable quantities of CO2. Microthermometric investigations revealed densities of the gaseous inclusions of 0.65 to 1.06 g/cm3 at Ashanti, 0.85 to 0.98 g/cm3 at Prestea, up to 1.02 g/cm3 at Konongo-Southern Cross, and 0.8 to 1.0 g/cm3 at Abosso/Damang. The fluid inclusion data are used to outline the PT ranges of gold mineralisation of the respective gold deposits. The high density gaseous inclusions found in the auriferous
quartz at Ashanti and Prestea imply rather high pressure trapping conditions of up to 5.4 kbar. In contrast, mineralisation
at Ayanfuri and Abosso/Damang is inferred to have occurred at lower pressures of only up to 2.2 kbar. Mesothermal gold mineralisation
is generally regarded to have formed from fluids characterized by H2O > CO2 and low salinity ( ± 6 eq.wt.%NaCl). However, fluid inclusions in quartz from the gold mineralisations in the Ashanti belt
point to distinctly different fluid compositions. Specifically, the predominance of CO2 and CO2 >> H2O have to be emphasized. Fluid systems with this unique bulk composition were apparently active over more than 200␣km along
strike of the Ashanti belt. Fluids rich in CO2 may present a hitherto unrecognised new category of ore-forming fluids.
Received: 30 May 1996 / Accepted: 8 October 1996 相似文献
8.
江西黄沙石英脉型钨矿床流体包裹体研究 总被引:13,自引:0,他引:13
黄沙钨矿床是赣南地区一大型石英脉型钨多金属矿床。本文采用"流体包裹体组合"的研究方法,对黄沙钨矿床主成矿阶段早期的黑钨矿-石英脉和晚期的硫化物-(黑钨矿)-石英脉石英中的流体包裹体进行了显微测温和拉曼探针的分析。研究表明,黑钨矿-石英脉中包裹体主要为水溶液包裹体和含CO2水溶液包裹体,硫化物-(黑钨矿)-石英脉中主要发育水溶液包裹体。黑钨矿-石英脉中包裹体的均一温度明显高于硫化物-(黑钨矿)-石英脉中的包裹体,但两者水溶液包裹体的盐度相差不大。激光拉曼探针测试表明,两期矿脉中水溶液包裹体的组分主要为水,在黑钨矿-石英脉中的含CO2水溶液包裹体,除CO2外,还检测到CH4和N2组分。研究表明,以CO2逸失为特征的流体不混溶作用是早期黑钨矿-石英脉含矿流体中的金属络合物分解并沉淀成矿的主要机制,晚期硫化物-(黑钨矿)-石英脉中矿质的沉淀则主要是流体的混合作用导致。 相似文献
9.
I. Kenis Ph. Muchez G. Verhaert A. Boyce M. Sintubin 《Contributions to Mineralogy and Petrology》2005,150(1):102-118
Fluid inclusions in quartz veins of the High-Ardenne slate belt have preserved remnants of prograde and retrograde metamorphic
fluids. These fluids were examined by petrography, microthermometry and Raman analysis to define the chemical and spatial
evolution of the fluids that circulated through the metamorphic area of the High-Ardenne slate belt. The earliest fluid type
was a mixed aqueous/gaseous fluid (H2O–NaCl–CO2–(CH4–N2)) occurring in growth zones and as isolated fluid inclusions in both the epizonal and anchizonal part of the metamorphic
area. In the central part of the metamorphic area (epizone), in addition to this mixed aqueous/gaseous fluid, primary and
isolated fluid inclusions are also filled with a purely gaseous fluid (CO2–N2–CH4). During the Variscan orogeny, the chemical composition of gaseous fluids circulating through the Lower Devonian rocks in
the epizonal part of the slate belt, evolved from an earlier CO2–CH4–N2 composition to a later composition enriched in N2. Finally, a late, Variscan aqueous fluid system with a H2O–NaCl composition migrated through the Lower Devonian rocks. This latest type of fluid can be observed in and outside the
epizonal metamorphic part of the High-Ardenne slate belt. The chemical composition of the fluids throughout the metamorphic
area, shows a direct correlation with the metamorphic grade of the host rock. In general, the proportion of non-polar species
(i.e. CO2, CH4, N2) with respect to water and the proportion of non-polar species other than CO2 increase with increasing metamorphic grade within the slate belt. In addition to this spatial evolution of the fluids, the
temporal evolution of the gaseous fluids is indicative for a gradual maturation due to metamorphism in the central part of
the basin. In addition to the maturity of the metamorphic fluids, the salinity of the aqueous fluids also shows a link with
the metamorphic grade of the host-rock. For the earliest and latest fluid inclusions in the anchizonal part of the High-Ardenne
slate belt the salinity varies respectively between 0 and 3.5 eq.wt% NaCl and between 0 and 2.7 eq.wt% NaCl, while in the
epizonal part the salinity varies between 0.6 and 17 eq.wt% NaCl and between 3 and 10.6 eq.wt% for the earliest and latest
aqueous fluid inclusions, respectively. Although high salinity fluids are often attributed to the original sedimentary setting,
the increasing salinity of the fluids that circulated through the Lower Devonian rocks in the High-Ardenne slate belt can
be directly attributed to regional metamorphism. More specifically the salinity of the primary fluid inclusions is related
to hydrolysis reactions of Cl-bearing minerals during prograde metamorphism, while the salinity of the secondary fluid inclusions
is rather related to hydration reactions during retrograde metamorphism. The temporal and spatial distribution of the fluids
in the High-Ardenne slate belt are indicative for a closed fluid flow system present in the Lower Devonian rocks during burial
and Variscan deformation, where fluids were in thermal and chemical equilibrium with the host rock. Such a closed fluid flow
system is confirmed by stable isotope study of the veins and their adjacent host rock for which uniform δ180 values of both the veins and their host rock demonstrate a rock-buffered fluid flow system. 相似文献
10.
Fluid Inclusions,C–H–O–S Isotope and Geochronology of the Bujinhei Pb–Zn Deposit in the Southern Great Xing'an Range of Northeast China: Implication for Ore Genesis 下载免费PDF全文
Xuebing Zhang Keyong Wang Lijuan Fu Miao Zhang Yassa Konare Dawei Peng Wenyan Cai 《Resource Geology》2017,67(2):207-227
The Bujinhei Pb–Zn deposit is located in the southern Great Xing'an Range metallogenic belt. It is a representative medium‐ to high‐temperature hydrothermal vein type deposit controlled by fractures, and orebodies hosted in the Permian Shoushangou Formation. The hydrothermal mineralization is classified into three stages: pyrite ± arsenopyrite–quartz (Stage 1), polymetallic sulfide–quartz (Stage 2), and polymetallic sulfide–calcite (Stage 3). Fluid inclusion petrography, laser Raman analyses and microthermometry indicate that the liquid‐rich aqueous inclusions (L) and vapor‐rich CO2 ± CH4–H2O inclusions (C) occur in the Stage 1 and as medium‐ to high‐ temperature and low‐ to medium‐salinity NaCl–H2O–CO2–CH4 hydrothermal fluids. The liquid‐rich (L) and rare vapor‐rich CO2 ± CH4–H2O inclusions (C) occur in the Stage 2 with medium‐temperature and low‐salinity NaCl–H2O ± CO2 ± CH4 hydrothermal fluids. The exclusively liquid‐rich (L) fluid inclusions are observed in the Stage 3, and the hydrothermal fluid belongs to medium‐temperature and low‐salinity NaCl–H2O hydrothermal fluids. The results of hydrogen and oxygen isotope analyses indicate that ore‐forming fluids were initially derived from the magmatic water and mixed with local meteoric water in the late stage (δ18OH2O‐SMOW = 6.0 to 2.2‰, δDSMOW = ?103 to ?134‰). The carbon isotope compositions (?18.4‰ to ?26.5‰) indicate that the carbon in the fluid was derived from the surrounding strata. The sulfur isotope compositions (5.7 to 15.2‰) indicate that the ore sulfur was also primarily derived from the strata. The ore vein No. 1 occurs in fractures and approximately parallel to the rhyolite porphyry; orebodies have a close spatial and temporal relationship with the rhyolite porphyry. The rhyolite porphyry yielded a crystallization age of 122.9 ± 2.4 Ma, indicating that the Bujinhei deposit may be related to the Early Cretaceous magmatic event. Geochemical analyses reveal that the Bujinhei rhyolite porphyry is high in K2O and peraluminous, and derived from an acidic liquid as a result of strong interaction with hydrothermal fluid during the late magmatic stage; it is similar to A2‐type granites, and formed in a backarc extensional environment. These results indicate that the Bujinhei Pb–Zn deposit was a vein type system that formed in Early Cretaceous and influenced by the Paleo‐Pacific tectonic system. Bujinhei deposit is a representative hydrothermal vein type deposit on the genetic types, and occurs on the western slope of the southern Great Xing'an Range. The ore‐forming fluids were medium‐ to high‐temperature and low‐to medium‐salinity NaCl–H2O–CO2–CH4 hydrothermal fluids, which became medium‐temperature and low‐salinity NaCl–H2O hydrothermal fluids in later stages, and came from magmatic water and mixed with meteoric water, whereas the ore‐forming materials were mainly derived from the surrounding strata. The LA–ICP–MS zircon U–Pb dating indicates that the Bujinhei deposit formed at the period of late Early Cretaceous, potentially in a backarc extensional environment influenced by the Paleo‐Pacific tectonic system. 相似文献
11.
F. Masoudi B. Mehrabi M. Rezai Aghdam B. W. D. Yardley 《Journal of the Geological Society of India》2009,73(3):407-418
In the Sanandaj-Sirjan zone of metamorphic belt of Iran, the area south of Hamadan city comprises of metamorphic rocks, granitic
batholith with pegmatites and quartz veins. Alvand batholith is emplaced into metasediments of early Mesozoic age. Fluid inclusions
have been studied using microthermometry to evaluate the source of fluids from which quartz veins and pegmatites formed to
investigate the possible relation between host rocks of pegmatites and the fluid inclusion types. Host minerals of fluid inclusions
in pegmatites are quartz, andalusite and tourmaline. Fluid inclusions can be classified into four types. Type 1 inclusions
are high salinity aqueous fluids (NaCleq >12 wt%). Type 2 inclusions are low to moderate salinity (NaCleq <12 wt%) aqueous fluids. Type 3 and 4 inclusions are carbonic and mixed CO2-H2O fluid inclusions. The distribution of fluid inclusions indicate that type 1 and type 2 inclusions are present in the pegmatites
and quartz veins respectively in the Alvand batholith. This would imply that aqueous magmatic fluids with no detectable CO2 were present during the crystallization of these pegmatites and quartz veins. Types 3 and 4 inclusions are common in quartz
veins and pegmatites in metamorphic rocks and are more abundant in the hornfelses. The distribution of the different types
of fluid inclusions suggests that CO2 fluids generated during metamorphism and metamorphic fluids might also contribute to the formation of quartz veins and pegmatites
in metamorphic terrains. 相似文献
12.
Fluid inclusions in the leucosomes of Wadi Feiran migmatites showed that CO
2
, H2O and (H2O-CO2) fluids were likely to have been present when partial melting began in these rocks. Low salinity, aqueous fluid, to a lesser
extent, CO2-rich fluids are the most abundant fluids. The present study suggests that high-density CO2 inclusions were formed at the earliest stage, while H2O inclusions were formed at the late stage. In an intermediate stage, low-density CO2 and H2O, CO2 inclusions were formed. At the early stage of uplift and during melt crystallization, the CO2-bearing vapour was trapped at grain boundaries. At the late stage of uplift, H2O released at the time of crystallization of the melt was trapped as inclusions. 相似文献
13.
Prosper Andrianjakavah Stefano Salvi Didier Béziat Damien Guillaume Michel Rakotondrazafy Bernard Moine 《Mineralium Deposita》2007,42(4):385-398
The Maevatanana deposits consist of gold-bearing quartz–sulphide veins crosscutting banded iron formation (BIF) within a metamorphosed
2.5 Ga greenstone belt. The host rocks are dominated by a sequence of migmatites, gneisses, amphibolites, magnetite-rich quartzites
and soapstones, intruded by large granitoid batholiths (e.g. the 0.8 Ga Beanana granodiorite). In the mineralised rocks, pyrite
is the dominant sulphide, in addition to accessory chalcopyrite and galena. Outside the immediate ore zone, the BIF is dominated
by quartz + magnetite ± hematite, accompanied by cummingtonite, albite and biotite. Gold occurs as globular grains (usually
<500 μm) within quartz crystals close to the sulphides and as invisible inclusions within pyrite and chalcopyrite (up to 2,500 ppm
Au content). Fluid inclusion textural and microthermometric studies indicate heterogeneous trapping of a low-salinity (∼3.6 wt.%
eq. NaCl) aqueous fluid coexisting with a carbonic fluid. Evidence for fluid-phase immiscibility during ore formation includes
variable L/V ratios in the inclusions and the fact that inclusions containing different phase proportions occur in the same
area, growth zone, or plane. Laser Raman spectroscopy confirms that the vapour phase in these inclusions is dominated by CO2 but shows that it may contain small amounts of CH4 (<1 mol%), H2S (<0.05 mol%) and traces of N2. Fluid inclusion trapping conditions ranged from 220 to 380°C and averaged 250°C. Pressure was on the order of 1–2 kbar.
The abundant CO2 and low salinity of the inclusions suggest a metamorphic origin for the fluid. Likewise, the presence of H2S in the fluid and pyritisation of the wall-rock indicate that gold was likely transported by sulphide complexing. Fluid immiscibility
was probably triggered by the pressure released by fracturing of the quartzites during fault movements due to competence differences
with the softer greenstones. Fracturing greatly enhanced fluid circulation through the BIF, allowing reaction of the sulphide-bearing
fluids with the iron oxides. This caused pyrite deposition and concomitant Au precipitation, enhanced by fluid phase separation
as H2S partitioned preferentially into the carbonic phase. 相似文献
14.
The Zhawulong granitic pegmatite lithium deposit is located in the Ganzi-Songpan orogenic belt. Fluid inclusions in spodumene and coexisting quartz were studied to understand the cooling path and evolution of fluid within albite–spodumene pegmatite. There are three distinguishable types of fluid inclusions: crystal-rich, CO2–NaCl–H2O, and NaCl–H2O. At more than 500°C and 350~480 MPa, crystal-rich fluid inclusions were captured during the pegmatitic magma-hydrothermal transition stage, characterized by a dense hydrous alkali borosilicate fluid with a carbonate component. Between 412°C and 278°C, CO2–NaCl–H2Ofluid inclusions developed in spodumene (I) and quartz (II) with a low salinity (3.3–11.9 wt%NaCl equivalent) and a high volatile content, which represent the boundary between the transition stage and the hydrothermal stage. The subsequentNaCl–H2Ofluid inclusions from the hydrothermal stage, between 189°C and 302°C, have a low salinity (1.1–13.9 wt%NaCl equivalent). The various types of fluid inclusions reveal the P–T conditions of pegmatite formation, which marks the transition process from magmatic to hydrothermal. The ore-forming fluids from the Zhawulong deposit have many of the same characteristics as those from the Jiajika lithium deposit. The ore-forming fluid provided not only materials for crystallization of rare metal minerals, such as spodumene and beryl, but also the ideal conditions forthe growth of ore minerals. Therefore, this area has favorable conditions for lithium enrichment and excellent prospecting potential. 相似文献
15.
Fluid inclusions have been studied in three pegmatite fields in Galicia, NW Iberian Peninsula. Based on microthermometry
and Raman spectroscopy, eight fluid systems have been recognized. The first fluid may be considered to be a pegmatitic fluid
which is represented by daughter mineral (silicates)-rich aqueous inclusions. These inclusions are primary and formed above
500 °C (dissolution of daughter minerals). During pegmatite crystallization, this fluid evolved to a low-density, volatile-rich
aqueous fluid with low salinity (93% H2O; 5% CO2; 0.5% CH4; 0.2% N2; 1.3% NaCl) at minimum P–T conditions around 3 ± 0.5 kbar and 420 °C. This fluid is related to rare-metal mineralization. The volatile enrichment may
be due to mixing of magmatic fluids and fluids equilibrated with the host rock. A drop in pressure from 3 ± 0.5 to 1 kbar
at a temperature above 420 °C, which may be due to the transition from predominantly lithostatic to hydrostatic pressure,
is recorded by two-phase, water-rich inclusions with a low-density vapour phase (CO2, CH4 and N2). Another inclusion type is represented by two-phase, vapour-rich inclusions with a low-density vapour phase (CO2, CH4 and N2), indicating a last stage of decreasing temperature (360 °C) and pressure (around 0.5 kbar), probably due to progressive
exhumation. Finally, volatile (CO2)-rich aqueous inclusions, aqueous inclusions (H2O-NaCl) and mixed-salt aqueous inclusions with low Th, are secondary in charac- ter and represent independent episodes of hydrothermal fluid circulation below 310 °C and 0.5 kbar.
Received: 14 October 1999 / Accepted: 5 October 1999 相似文献
16.
Gold mineralization in the Kolar schist belt of the Dharwar craton occurs dominantly in the form of a sulfide-poor Au-quartz
lode (the Champion lode exposed in the Mysore and other mines) and sulfide-rich auriferous lodes (from the Nundydroog mine).
Fluid inclusion microthermometric experiments were conducted on primary inclusions in quartz intimately associated with Au-mineralization.
Homogenization studies on aqueous-biphase (L + V), aqueous polyphase (L + V+ halite) and aqueous-carbonic (LCO2± VCO2 + Laq) inclusions from the Champion lode furnish a temperature range of 120 to 420 °C. Freezing of aqueous biphase inclusions and
dissolution of halite in the aqueous polyphase inclusions provide salinity of 5 to 50 wt.% NaCl equivalent. Fluid inclusion
thermobarometry from the total homogenization of aqueous-carbonic inclusions and from intersecting isochores of coeval pure-carbonic
(LCO2± VCO2) and pure-aqueous inclusions constrain the P-T path of evolution of the fluid in the Champion lode. Gold precipitation was likely to have been brought about in response
to a sharp fall in pressure with attendant unmixing of liquid-CO2 from the parent H2O-CO2 fluid of possible metamorphic origin. This would imply transportation of gold by some pressure-sensitive complex such as
the Au-carbonyl. Fluid characteristics are different in the sulfide-rich auriferous lodes, as indicated by the virtual absence
of the CO2-bearing and the halite-bearing inclusions. The fluid evolution path, as evident from the crude positive colinearity of temperature
and salinity, is due to mixing of a low (≤200 °C) temperature-low saline (≤7 wt.% NaCl equivalent) fluid with a high temperature
(≥400 °C)-high saline (≥50 wt.% NaCl equivalent) fluid. The lack of CO2 and association of Au with sulfides indicate a different mode of gold transport, as chloride or bisulfide complexing, deposition
of which was possibly brought about by fluid mixing.
Received: 17 April 1997 / Accepted: 30 June 1998 相似文献
17.
The Olympias Pb-Zn(Au, Ag) sulfide ore deposit, E. Chalkidiki, N. Greece, is hosted by marbles of the polymetamorphic Kerdilia
Formation of Paleozoic or older age. The geologic environment of the ore also comprises biotite-hornblende gneisses and amphibolites
intruded by Tertiary pegmatite-aplite dikes, lamprophyre dikes, the 30-Ma Stratoni granodiorite, and porphyritic stocks. Only
limited parts of the deposit display shear folding and brecciation; most of it is undeformed. Microthermometry of fluid inclusions
in gangue syn-ore quartz indicates three types of primary and pseudosecondary inclusions: (1) H2O-rich, 1–18 wt.% NaCl equivalent, <3.6 mol% CO2; (2) H2O-CO2 inclusions, <4wt.% NaCl equivalent, with variable CO2 contents, coexisting in both undeformed and deformed ore; (3) aqueous, highsalinity (28–32 wt,% NaCl equivalent) inclusions
found only in undeformed ore. Type 2 inclusions are differentiated into two sub-types: (2a) relatively constant CO2 content in the narrow range of 8–15 mol% and homogenization to the liquid phase; (2b) variable CO2 content between 18 and 50 mol% and homogenization to the vapor phase. Type 1 and 2b inclusions are consistent with trapping
of two fluids by unmixing of a high-temperature, saline, aqueous, CO2-bearing fluid of possible magmatic origin, probably trapped in type 2a inclusions. Fluid unmixing and concomitant ore mineralization
took place at temperatures of 350 ± 30 °C and fluctuating pressures of less than 500 bar, for both undeformed and deformed
ores. The wide salinity range of type 1 inclusions probably represents a complex effect of salinity increase, due to fluid
unmixing and volatile loss, and dilution, due to mixing with low-salinity meteoric waters. High solute enrichment of the residual
liquid, due to extreme volatile loss during unmixing, may account for high salinity type 3 inclusions. The Olympias fluid
inclusion salinity-temperature gradients bear similarities to analogous gradients related to Pb-Zn ores formed in “granite”-hosted,
low-T distalskarn, skarn-free carbonate-replacement and epithermal environments. 相似文献
18.
Fluid inclusions in mineralized graphite-sillimanite-mica schist from the Rampura-Agucha Pb-Zn-(Ag) deposit, Rajasthan, northwest India, have been investigated by microthermometry and Raman microspectrometry. Three different main types of fluid inclusions in quartz can be distinguished: (1) gaseous (CO2, partially mixed with CH4-N2), (2) low salinity aqueous inclusions (0–8 eq. wt% NaCl) and (3) high salinity aqueous inclusions (NaCl ± MgCl2-CaCl2). Low density CO2-rich and low salinity H2O inclusions are contemporaneous and occur, together with CH4-N2 inclusions, in close association with sulfide mineral inclusions. This indicates immiscibility between the gaseous and aqueous phase and participation of these fluids during the deposition or remobilization of the ore, which occurred over a wide P (1220 to 200 bar) and T (450 to 250 °C). Raman spectra of graphite indicate upper greenschist-facies metamorphic conditions, although host rocks have been metamorphosed at upper amphibolite-facies metamorphic conditions. This indicates that graphite re-equilibrated with the CO2-rich phase during retrograde metamorphism. 相似文献
19.
Heating and freezing studies on fluid inclusions in quartz from mineralized quartzfeldspar reef reveal the presence of type A CO2-H2O (H2O>50% by volume), type B CO2-H2O (H2O<50% by volume), type C pure CO2 and type D pure aqueous inclusions. Types A, B and C are primary and/or psuedo-secondary inclusions while type D are secondary. Types A and B homogenize on heating into different phases at similar temperatures ranging between 307 and 476°C, indicating entrapment from boiling hydrothermal solutions. Type D inclusions homogenize into a liquid phase at temperatures between 88 and 196°C. Boiling of hydrothermal solutions led to the formation of a CO2-rich phase of low density and salinity that coexisted with another dense and saline aqueous phase with very little CO2 dissolved in it. Ore and gangue mineral assemblage of primary ores indicate that ore deposition was characterized by logf O 2=?34.4 to ?30.2 atm, logf S 2=?11.6 to ?8.8 atm and pH=4.5 to 6.5. 相似文献
20.
J. Konnerup-Madsen 《Lithos》1979,12(1):13-23
H2O, CO2, and H2OCO2 inclusions were observed in quatz from deep-seated granitic intrusions belonging to the Precambrian Farsund plutonic complex, south Norway. These inclusions represent solidus and/or sub-solidus fluids that were present in these rocks at some period between the initial melt and the present. Early CO2 and H2OCO2 inclusions with about 20 mole% CO2 contain up to 10 mole% CH4 in the CO2 phase and have densities from 0.96 to 0.85 g/cc. These inclusions are considered to most nearly approximate solidus vapour phases and suggest conditions of final solidification of the magma at 5 to 6 Kb and 700°C to 800°C. The H2O inclusions have salinities between 2 and 60 wt%; the majority contain 5 to 20 equivalent wt.% NaCl and have densities from 1.05 to 0.85 g/cc. Microthermometry indicates that other cations such as K+, Ca2+ and / or Mg2+ are present in these aqueous fluids. The H2O inclusions primarily represent fluids present at a post-magmatic stage of fracturing and healing of these rocks during uplift. 相似文献