共查询到20条相似文献，搜索用时 775 毫秒
1.
Lattice preferred orientations (LPO) of quartz have been investigated along a south–north oriented section across the Plattengneis of the Koralm Complex (Eastern Alps). The Plattengneis forms an important shear zone within the Austroalpine nappe complex of the Eastern Alps, which has developed during the Cretaceous evolution of the Alpine orogen. The quartz c-axes form small circle distributions in the southernmost parts of the Koralm Complex, which represent the uppermost structural level of the Plattengneis. Further to the North two maxima between the Y and Z directions of the finite strain can be interpreted in terms of preferred slip on the rhomb planes. These fabrics continuously grade into (type I and type II crossed) girdle distributions in a northward direction. A strong maximum near the Y-axis with the tendency to be distributed along a single girdle, with three corresponding maxima of a-axes near the margin of the pole figure, can be observed in the central and northern parts. Such LPO are characteristic for both high grade metamorphic conditions and high finite strain. The microstructures display that the deformation within the Plattengneis shear zone was synmetamorphic. A continuous increase of peak temperatures (and pressure) from approximately 550 °C to approximately 750 °C from the South to the central parts can be inferred from geothermometric calculations. The temperatures then decrease to approximately 650 °C from the central parts to the North. The related pressures increase from 8 to 16 kbar, and then decrease to 10 kbar. The LPO changes that have been observed in the study area are best interpreted in terms of temperature dependence of the activation of glide systems within quartz aggregates. The temperature and pressure evolution may indicate that the central parts of the Koralm Complex have been exhumed by larger amounts than the northern and southern parts. This is also documented by the LPO evolution. Therefore, we assume that the Plattengneis shear zone formed during the exhumation of the Koralm Complex, and is related to the exhumation of high-pressure units in the footwall of this shear zone. Accordingly, the kinematics of the Plattengneis shear zone is rather extensional than thrust-related. The implications for the structural evolution of the Eastern Alps are shortly discussed. 相似文献
2.
The Plankogel detachment of the Eastern Alps: petrological evidence for an orogen‐scale extraction fault 
下载免费PDF全文
下载免费PDF全文 The so‐called Plankogel detachment is an east‐west trending, south‐dipping low‐angle structure that juxtaposes the high‐P rocks of the eclogite type locality of the eastern European Alps against amphibolite facies rocks to the south. It occurs in both the Saualpe and Koralpe Complex in eastern Austria. During Cretaceous intracontinental subduction, the footwall and the hangingwall units of the Plankogel detachment were buried to different crustal levels as inferred by pseudosection modelling and conventional thermobarometry: ~23–24 kbar and 640–690 °C for the eclogite facies units in the footwall of the detachment and ~12–14 kbar and 550–580 °C for the amphibolite facies metapelites in the hangingwall. Despite the different peak metamorphic conditions, both sides of the detachment display a common overprint at conditions of ~10 kbar and 580–650 °C. From this, we infer a two‐stage exhumation process and suggest that this two‐stage process is best interpreted tectonically in terms of slab extraction during Eoalpine subduction. The first stage of exhumation occurred due to the downward (southward) extraction of a lithospheric slab that was localized in the trace of the Plankogel detachment. The later stage, however, is attributed to more regional erosion‐ or extension‐driven processes. Since the Plankogel detachment is geometrically related to a crustal‐scale shear zone further north (the Plattengneiss shear zone), we suggest that both structures are part of the same extraction fault system along which the syn‐collisional exhumation of the Eoalpine high‐P units of the Eastern Alps occurred. The suggested model is consistent with both the mylonitic texture of the Plattengneiss shear zone and the overall ambiguous shear sense indicators present in the entire region. 相似文献
3.
超高压变质岩的折返过程是陆陆碰撞边界演化的关键问题。南倾的花凉亭-弥陀剪切带位于南大别低温-超高压变质
带和中大别中温-超高压变质带之间,矿物拉伸线理倾伏向为SE,逆冲和走滑分量大致相等。电子背散射衍射分析表明：
花凉亭-弥陀剪切带大多数样品的石英组构记录了上盘向NW的剪切变形,反映了中大别超高压变质岩向SE的快速折返,
而部分样品的石英具有上盘向SE的剪切指向,与早白垩世花岗岩穹隆发育导致的区域伸展有关。对前人的岩石学和年代学
成果进行总结,发现大别山进变质和超高压变质峰期/退变质的锆石U-Pb年龄从南往北逐渐变新,南大别和中大别在215~
225 Ma同时经历了高压榴辉岩相退变质作用,在191~195 Ma经历了绿片岩相变质作用。超高压变质岩的白云母和黑云母的
40Ar/39Ar年龄靠近郯庐断裂时偏年轻,可能受到郯庐断裂活动的影响。南大别和中大别变质峰期温压的等值线与花凉亭-弥
陀剪切带的走向斜交,反映了超高压变质岩的斜向折返。因此,南大别低温-超高压变质带在~236 Ma最先开始折返,之后
中大别和北大别依次发生快速折返,具有不同折返速率和折返角度的构造岩片通过韧性剪切带调节相对运动。 相似文献
4.
大别造山带东段扬子陆块和华北陆块间缝合带的位置 总被引：3，自引：0，他引：3
大别山为扬子陆块和华北陆块之间的碰撞造山带.构造-岩石单元的岩石组成、同位素年代学资料和构造关系表明, 大别山东段主要由扬子陆块北缘不同变质程度的变质基底和少量浅变质盖层组成, 没有代表蛇绿混杂岩和华北陆块南缘古生代活动大陆边缘的火山-侵入岩建造.各主要构造-岩石单元间的界线为超高压变质岩折返过程中形成的伸展型剪切带, 大别山北部的伸展-逆冲推覆构造也是超高压变质岩折返过程中伸展构造的一部分, 其中不存在具有缝合带意义的重要构造界线.因此, 在大别山东段, 华北陆块和扬子陆块间的缝合带既不是水吼-五河剪切带, 也不是磨子潭-晓天断裂.根据地球物理资料推测, 南北陆块间的缝合带应分布在信阳-舒城断裂的前缘, 但现在覆于合肥盆地中新生代沉积之下. 相似文献
5.
Sanzhong Li Timothy M. Kusky Xiaochun Liu Guowei Zhang Guochun Zhao Lu Wang Yuejun Wang 《Gondwana Research》2009,16(2):294
The western Dabie orogen (also known as the Hong'an block) forms the western part of the Dabie–Sulu HP–UHP belt, central China. Rocks of this orogen have been subjected to pervasive ductile deformation, and include numerous quartz schists and felsic mylonites cropping out in ductile shear zones. Quartz textures in these mylonites contain important clues for understanding the movement sense of late-collisional extrusion and exhumation of high-pressure–ultrahigh-pressure (HP–UHP) rocks from the lower crustal level to the upper crustal level during Middle Triassic and Early Jurassic. The orientation and distribution of quartz crystallographic axes were used to confirm the regional shear sense across the orogen. The asymmetry of c-axis patterns consistently indicates top-to-the-southeast thrusting across the orogen in early structural stages. Later stages of deformation show different senses of movement in northern and southern parts of the orogen, with top-to-the-northwest sinistral shearing recorded in rocks north of the Xinxian HP–UHP eclogite-facies belt, and top-to-the-southeast dextral shearing south of the same unit.Based on our study on quartz c-axis fabrics and marco- to micro-scale structures, simultaneous southeastward shearing within a large part of the orogen and normal faulting north of the Xinxian HP–UHP unit is explained by upward extrusion in early stages of deformation. The extrusion process has been attributed to syn- and late-collisional processes, accounting for some earlier deformation in the western Dabie orogen such as metamorphic sequences around the core of the Xinxian HP–UHP eclogite-facies unit. Much higher pressure of deformation is also indicated in the aligned glaucophane and omphacite from blueschist and eclogite in the field. An orogen-parallel eastward extrusion of the Xinxian HP–UHP eclogite-facies unit, however, occurred diachronously in later stages of deformation. Therefore, a tectonic model combining an early upward extrusion with a later eastward extrusion is presented. Two different stages and types of extrusion for exhumation of HP–UHP rocks are suitable to all of east central China. Geochronological data shows that the first, upward extrusion occurred during Middle Triassic, the second, eastward extrusion occurred during Late Triassic to Early Jurassic. These two extrusions are correlative with two stages of rapid exhumation of the Dabie HP–UHP rocks, respectively. These two-stage late-collisional (Middle Triassic to Early Jurassic) extrusion events bridge the gap between syn-collisional (Early to Middle Triassic) vertical extrusion and post-collisional (Cretaceous) eastward-directed lateral escape and provide vital clues to understanding the more detailed processes of exhumation of HP–UHP rocks. 相似文献
6.
High‐ to ultrahigh‐pressure (HP‐UHP) metamorphic rocks that resulted from deep continental subduction and subsequent exhumation in the Sulu orogenic belt, China, have experienced multiphase deformation and metamorphic overprint during its long journey to the mantle and return to the surface. HP‐UHP shear zones are strain‐localized weak zones on which the UHP slab is transported over long distances. HP‐UHP shear zones are well exposed along a 200‐km belt in the Sulu UHP metamorphic belt. The shear zones lie structurally below the UHP rocks and above the non‐UHP rocks, suggesting the early exhumation of the UHP rocks by thrusting. The large area distribution, HP‐UHP nature, high strain and structural association of the shear zones with the UHP rocks suggest that the shear zones are probably a regional detachment developed during the early stage of exhumation of the UHP rocks. Kinematic indicators suggest top‐to‐the N–NW motion of the UHP slab during the exhumation, which, combined with isotope signature in Mesozoic igneous rocks, leads us to the interpretation that the subduction polarity is the North China plate down to the south rather than the Yangtze plate down to the north in the Sulu region. 相似文献
7.
Y. Osanai M. Owada A. Kamei T. Hamamoto H. Kagami T. Toyoshima N. Nakano T.N. Nam 《Gondwana Research》2006,9(1-2):152
The Higo terrane in west-central Kyushu Island, southwest Japan consists from north to south of the Manotani, Higo and Ryuhozan metamorphic complexes, which are intruded by the Higo plutonic complex (Miyanohara tonalite and Shiraishino granodiorite).The Higo and Manotani metamorphic complexes indicate an imbricate crustal section in which a sequence of metamorphic rocks with increasing metamorphic grade from high (northern part) to low (southern part) structural levels is exposed. The metamorphic rocks in these complexes can be divided into five metamorphic zones (zone A to zone E) from top to base (i.e., from north to south) on the basis of mineral parageneses of pelitic rocks. Greenschist-facies mineral assemblages in zone A (the Manotani metamorphic complex) give way to amphibolite-facies assemblages in zones B, C and D, which in turn are replaced by granulite-facies assemblages in zone E of the Higo metamorphic complex. The highest-grade part of the complex (zone E) indicates peak P–T conditions of ca. 720 MPa and ca. 870 °C. In addition highly aluminous Spr-bearing granulites and related high-temperature metamorphic rocks occur as blocks in peridotite intrusions and show UHT-metamorphic conditions of ca. 900 MPa and ca. 950 °C. The prograde and retrograde P–T evolution paths of the Higo and Manotani metamorphic complexes are estimated using reaction textures, mineral inclusion analyses and mineral chemistries, especially in zones A and D, which show a clockwise P–T path from Lws-including Pmp–Act field to Act–Chl–Epi field in zone A and St–Ky field to And field through Sil field in zone D.The Higo metamorphic complex has been traditionally considered to be the western-end of the Ryoke metamorphic belt in the Japanese Islands or part of the Kurosegawa–Paleo Ryoke terrane in south-west Japan. However, recent detailed studies including Permo–Triassic age (ca. 250 Ma) determinations from this complex indicate a close relationship with the high-grade metamorphic terranes in eastern-most Asia (e.g., north Dabie terrane) with similar metamorphic and igneous characteristics, protolith assembly, and metamorphic and igneous ages. The north Dabie high-grade terrane as a collisional metamorphic zone between the North China and the South China cratons could be extended to the N-NE along the transcurrent fault (Tan-Lu Fault) as the Sulu belt in Shandong Peninsula and the Imjingang belt in Korean Peninsula. The Higo and Manotani metamorphic complexes as well as the Hida–Oki terrane in Japan would also have belonged to this type of collisional terrane and then experienced a top-to-the-south displacement with forming a regional nappe structure before the intrusion of younger Shiraishino granodiorite (ca. 120 Ma). 相似文献
8.
自中三叠世扬子与华北板块发生碰撞—深俯冲作用以来,大别造山带南界上的襄樊—广济断裂带主要经历过两次变形事件: 1)早期变形事件发生在中三叠世末—晚三叠世初的造山带折返阶段,表现为造山带南边界上的韧性剪切带。这期北西—南东走向的剪切带向南西陡倾,发育北西—南东向的矿物拉伸线理,主要为右行走滑的运动性质,属于造山带斜向折返的侧边界走滑剪切带。造山带折返过程中将前陆褶断带北缘原先东西向褶皱改造为北西—南东走向。2)晚期变形事件发生在晚侏罗世,表现为脆性逆冲断层,使得前陆褶断带向北东逆冲在造山带南缘之上,同时在前陆上形成了一系列的逆冲断层。该断裂带的晚期逆冲活动与郯庐断裂带左行平移同时发生,代表了滨太平洋构造活动的开始。 相似文献
9.
J. G. Raith 《Mineralium Deposita》1991,26(1):72-80
Stratabound tungsten mineralization in regional metamorphic calc-silicate rocks of probably Lower Paleozoic age is described from the polymetamorphic Austroalpine Crystalline Complex (ACC) of the Eastern Alps. Scheelite-bearing calc-silicate rocks which are often associated with marbles and tourmalinites are intercalated conformably with metaclastic rocks. Alkalipoor calc-silicate rocks with high amounts of clinozoisite/ zoisite, grossular, quartz, plagioclase, etc. are the most important host rocks for tungsten mineralization. These unusual calc-silicate rocks are products of regional metaorphism and are interpreted as reaction skarns. They have formed in the presence of a water-dominated fluid phase with very low XCO2.In the Koralpe estimated P-T conditions are 650–700 °C at 5–7 kb. The mineralogical composition and the mineral zoning of the calc-silicate rocks is controlled by the degree of the Hercynian and Eoalpine metamorphism. There are no signs of graniteelated skarn formation. Tungsten preconcentration is thought to be syngenetic/syndiagenetic. It is genetically linked to exhalative hydrothermal processes in other Lower Paleozoic terrains of the Eastern Alps. 相似文献
10.
《Australian Journal of Earth Sciences》2013,60(6):983-999
We present new data on the field geology and late thermal evolution of the Redbank Thrust system in the Arunta Block of central Australia. Geochronological and field data from the Speares Metamorphics are also used to relate the thermal evolution of the Redbank Thrust system to the structural evolution of the region. We show that several stages in the evolution might be discerned. An originally sedimentary sequence was intruded by mafic intrusions and then deformed during partial melting to form the principal foliation observed in the region (D1). This sequence was then folded during D2 into upright folds with north‐ to northeast‐plunging fold axes. These events are likely to correlate with the Strangways and/or Argilke and Chewings Orogenies known from previous studies. Subsequently, the Redbank Thrust was initiated during D3. This event is recognised by deflection of the host rocks into the shear zone and might therefore have been associated with a component of strike‐slip motion. It occurred probably at or before 1500–1400 Ma. Subsequent north‐over‐south thrust motion in the Redbank Thrust formed the intense mylonitic fabric and folded the mylonitic fabric during D4 into asymmetric folds with shallow fold axes. New 40Ar/39Ar K‐feldspar ages from three samples collected from variably deformed branches of the Redbank Thrust and undeformed rocks in the Speares Metamorphics suggest that most parts of the Redbank Thrust system cooled relatively slowly after metamorphism and deformation in the Mesoproterozoic so that the D4 thrusting might have been very long‐lived. Minimum ages of the K‐feldspar age spectra show that the entire region cooled below 200°C by approximately 300 Ma. Apatite fission track ages from nine samples show that cooling through the apatite partial annealing zone occurred during Cretaceous time (ca 150–70 Ma) and modelled cooling histories are consistent with the cooling rates obtained from the K‐feldspar data. They indicate that final exhumation of the Redbank Thrust system occurred probably in response to erosion, possibly driven by rifting around the margins of Australia. 相似文献
11.
The Koralpe of the Eastern European Alps experienced high-temperature/low-pressure metamorphism (∼650 °C and 6.5 kbar) during the Permian and eclogite facies metamorphism (∼700 °C and 14 kbar) during the Eo-Alpine (Cretaceous) metamorphic event. In the metapelitic Plattengneiss shear zone that constitutes much of the Koralpe, the second metamorphism caused only partial re-equilibration of the assemblages formed during the first metamorphism. It is shown here that the Eo-Alpine mineral assemblage, garnet + biotite + muscovite + plagioclase + quartz (with or without kyanite), formed under low water activity conditions that are consistent with the level of dehydration that occurred during the Permian event. This implies that the rocks were essentially closed-system from the peak of the Permian metamorphism through the Eo-Alpine event. The evolution of water content of the rocks is traced through time: that prograde dewatering during the Permian metamorphic event terminated at the metamorphic peak with a water content around 3–4 mol.%. The water content remained then constant and led to water-undersaturation during the subsequent Eo-Alpine metamorphism. From the water content and activity evolution a post-peak isothermal decompression path close to the solidus is inferred for the Eo-Alpine event. 相似文献
12.
Jacek Kossak-Glowczewski Nikolaus Froitzheim Thorsten Nagel Jan Pleuger Ruth Keppler Bernd Leiss Verena Régent 《Swiss Journal of Geoscience》2017,110(2):677-697
The Adula Nappe in the Central Alps comprises pre-Mesozoic basement and minor Mesozoic sediments, overprinted by Paleogene eclogite-facies metamorphism. Peak pressures increase southward from ca. 1.2 GPa to values over 3 GPa, which is interpreted to reflect exhumation from a south-dipping subduction zone. The over- and underlying nappes experienced much lower Alpine pressures. To the north, the Adula Nappe ends in a lobe surrounded by Mesozoic metasediments. The external shape of the lobe is simple but the internal structure highly complicated. The frontal boundary of the nappe represents a discontinuity in metamorphic peak temperatures, between higher T in the Adula Nappe and lower T outside. A shear zone with steeply dipping foliation and shallowly-plunging, WSW-ENE oriented, i.e. orogen-parallel stretching lineation overprinted the northernmost part of the Adula Nappe and the adjacent Mesozoic metasediments (Vals-Scaradra Shear Zone). It formed during the local Leis deformation phase. The shear sense in the Vals-Scaradra Shear Zone changes along strike; from sinistral in the W to dextral in the E. Quartz textures also vary along strike. In the W, they indicate sinistral shearing with a component of coaxial (flattening) strain. A texture from the middle part of the shear zone is symmetric and indicates coaxial flattening. Textures from the eastern part show strong, single c-axis maxima indicating dextral shearing. These relations reflect complex flow within the Adula Nappe during a late stage of its exhumation. The structures and reconstructed flow field indicate that the Adula basement protruded upward and northward into the surrounding metasediments, spread laterally, and expelled the metasediments in front towards west and east. 相似文献
13.
The Cheyenne belt of southeastern Wyoming is a major shear zone which separates Archean rocks of the Wyoming province to the north from 1800-1600 Ma old eugeoclinal gneisses to the south. Miogeoclinal rocks (2500-2000 Ma old) unconformably overlie Archean basement immediately north of the shear zone and were deposited under transgressive conditions along a rift-formed continental margin. Intrusive tholeiitic sills and dikes are interpreted as rift-related intrusions and a date of 2000 Ma on a felsic differentiate of these intrusions gives the approximate age of rifting. There are no known post-2000 Ma felsic intrusions north of the Cheyenne belt.Volcanogenic gneisses and abundant syntectonic calc-alkaline plutons of the southern terrane are interpreted as island are volcanic and plutonic rocks. The volcanics are a bimodal basalt-rhyolite assemblage. Plutons include large gabbroic complexes and quartz diorite (1780 Ma), syntectonic granitoids (1730-1630 Ma) and post-tectonic anorthosite and granite (1400 Ma). There is no evidence for Archean crust south of the Cheyenne belt.Structural data (thrusts in the miogeoclinal rocks, vertical stretching lineations, and the same fold geometries north and south of the shear zone) suggest that juxtaposition of the two terranes took place by thrusting of the southern terrane (island arc) over the northern terrane (craton and miogeocline), probably as a continuation of the south-dipping subduction which generated calc-alkaline plutons of the southern terrane. A metamorphic discontinuity across the shear zone, with greenschist facies rocks to the north and upper amphibolite facies rocks and migmatites to the south, also suggests thrusting of the southern terrane (deeper crustal levels) over the northern terrane (shallower levels).The Cheyenne belt may be a deeply-eroded master decollement, perhaps analogous to a ramp in the master decollement in the southern Appalachians. This interpretation of the Cheyenne belt as a Proterozoic suture zone provides an explanation for the geologic, geochronologic, geophysical, metallogenic, and metamorphic discontinuities across the shear zone. 相似文献
14.
秦岭洛南-栾川断裂带具有左旋斜向俯冲的运动学特征,其产状一般为107°/N∠65°。华南板块的俯冲方向为80°,俯冲角度为42°;华南板块运动方向为42°,运动方向与华北板块南部边界的夹角为65°,汇聚角25°。秦岭北缘强变形带内褶皱枢纽延伸方向为290°,与洛南-栾川断裂带存在15°的夹角。逆冲断层走向与褶皱的枢纽方向基本一致,大多数断层与洛南-栾川断裂带有相同的运动学极性,性质为左行平移逆断层。平移正断层走向主要为NE SW,断层性质、展布方向、运动学特征与板块汇聚的应力作用方式吻合;片理、片麻理走向117°,与洛南-栾川断裂带走向夹角为10°。在垂直剪切带的剖面上,系统观察岩石变形特征,测量面理产状,进行岩石有限应变测量,岩石非共轴递进变形分析结果表明:秦岭北缘强变形带内由南向北面理走向与剪切带走向的夹角逐渐增大,岩石剪应变量依次递减,造山带变形具有“三斜对称”特点。 相似文献
15.
苏北—鲁东南高压,超高压变质带剥露过程中伸展构造作用 总被引：7，自引：2，他引：5
尽管许多地质学家提出了不同的超高压变质岩石形成与折返模式,但高压、超高压变质岩折返与剥露机制仍是大陆造山带动力学研究中的热点和焦点问题。本文明确提出并研究了分布于苏北－胶南变质岩区西北和北部边缘的地壳规模的拆离伸展型韧性剪切带。通过韧性剪切带几何学、运动学、变形环境分析和形成时代的讨论,认为与高压、超高压变质带展布方向斜交的斜向伸展构造作用,是苏北－鲁东南高压、超高压变质带从中地壳抬升至地表的主导 相似文献
16.
通过对锦屏山地区详细填图,确认了苏鲁造山带南缘超高压变质带与高压变质带的界线性质为一韧性剪切带,锦屏地区不存在区域性褶皱,而是由于朐山花岗质片麻岩和云台岩群变质火山岩构成强干岩层,锦屏岩群变质沉积岩构成软弱岩层,形成夹心饼式(layer cake assemble）组合。在印支期右行剪切作用下,形成不均一剪切,使朐山花岗质片麻岩形成长约10km,宽约5km的无根剪切舌状体,物质运动方向指向南。 相似文献
17.
The Bitterroot metamorphic core complex is an exhumed, mid-crustal, plutonic–metamorphic complex that formed during crustal thickening and subsequent extension in the hinterland of the North American Cordilleran Orogen, in the northern Idaho batholith region. Extension was accommodated mainly on the Bitterroot mylonite zone, a 500–1500-m-thick shear zone that deforms granitic intrusive rocks as young as 53–52 Ma, as well as older high-grade metamorphic rocks and plutons. Exhumation of the core complex, in Eocene time, is marked in the shear zone by the transition from amphibolite-facies mylonitization, to greenschist-facies mylonitization, chloritic brecciation, to brittle faulting that progressed from shallower crustal levels in the west to deeper crustal levels in the east from ca. 53 –30 Ma based on U–Pb, Ar–Ar, and fission-track data. Apatite and zircon fission-track data record the lower-temperature part of the exhumation history and help define when the shear zone became inactive, as well as the transition from rapid, core complex-style extension to slower basin-and-range-style extension. They indicate that the western part of the complex was exhumed to within 1–2 km of the surface by 48–45 Ma, while the eastern part of the complex was still at amphibolite-facies conditions and that the eastern part of the complex was not exhumed below 60 °C until after 30 Ma. Younger apatite fission-track ages (≤26 Ma) on the eastern range front of the Bitterroot Mountains suggest that the present topographic expression of the mylonite front was due to Miocene high-angle faulting and widening of the Bitterroot Valley. 相似文献
18.
《International Geology Review》2012,54(2):144-164
The Salado River fault (SRF) is a prominent structure in southern Mexico that shows evidence of reactivation at two times under different tectonic conditions. It coincides with the geological contact between a structural high characterized by Palaeozoic basement rocks to the north, and an ～2000 m thick sequence of marine and continental rocks that accumulated in a Middle Jurassic–Cretaceous basin to the south. Rocks along the fault within a zone up to 150 m across record crystal-plastic deformation affecting the metamorphic basement of the Palaeozoic Acatlán Complex. Later brittle deformation is recorded by both the basement and the overlying Mesozoic sedimentary rocks. Regional features and structural textures at both outcrop and microscopic scale indicate two episodes of left-lateral displacement. The first took place under low-to medium-grade P-T conditions in the late Early Jurassic (180 Ma) based on the interpretation of 40Ar/39Ar ratios from muscovite within the fault zone; the second occurred under shallow conditions, when the fault served as a transfer zone between areas with differing magnitudes of shortening north and south of the fault. In the southern block, fold hinges were dragged westward during Laramide tectonic transport to the east, culminating in brittle deformation characterized by strike–slip faulting in the Mesozoic sedimentary rocks. North of the fault, folds are not well defined, and it is clear that the fold hinges observed in the southern block do not continue north of the fault. Although the orientation and kinematics of the SRF are similar to major Cainozoic shear zones in southern Mexico, our new data indicate that the fault had become inactive by the time of Oligocene volcanism. 相似文献
19.
Analysis of fault system in the high-P/T type Sambagawa metamorphic rocks of central Shikoku, southwest Japan, shows that conjugate normal faults pervasively developed in the highest-grade biotite zone (upper structural level) in three study areas (Asemi river, Oriu and Niihama areas). These conjugate normal faults consist of NE–SW to E–W striking and moderately north-dipping (set A), and NNW–SSE striking and moderately east dipping (set B) faults. The fault set A is dominant compared to the fault set B, and hence most of deformation is accommodated by the fault set A, leading to non-coaxial deformation. The sense of shear is inferred to be a top-to-the-WNW to NNW, based on the orientations of striation or quartz slickenfibre and dominant north-side down normal displacement. These transport direction by normal faulting is significantly different from that at D1 penetrative ductile flow (i.e. top-to-the-W to WNW). It has also been found that these conjugate normal faults are openly folded during the D3 phase about the axes trending NW–SE to E–W and plunging west at low-angles or horizontally, indicating that normal faulting occurred at the D2 phase. D2 normal faults, along which actinolite breccia derived from serpentinite by metasomatism sometimes occurs, perhaps formed under subgreenschist conditions (ca. 250 °C) in relation to the final exhumation of Sambagawa metamorphic rocks into the upper crustal level. The pervasive development of D2 normal faults in the upper structural level suggests that the final exhumation of Sambagawa metamorphic rocks could be caused by “distributed extension and normal faulting (removal of overburden)” in the upper crust. 相似文献
20.
中国大陆科学钻探主孔1200米构造柱及变形构造初步解析 总被引：31，自引：20，他引：31
在利用成象测井资料准确地恢复岩心空间位置的基础上，建立了位于江苏省东海县毛北村的中国大陆科学钻探主孔岩心1200m精细构造柱。划分了由榴辉岩与超镁铁质岩组成的第一岩性-构造单元及由副片麻岩夹榴辉岩与超镁铁质岩透镜体组成的第二岩性-构造单元，自上而下岩石的面理产状由向东陡倾变为向南东缓倾。第一岩性-构造单元的榴辉岩与超镁铁质岩是毛北榴辉岩杂岩体的组成部分，在榴辉岩中发现以南北向拉伸线理及由北往南的剪切指向为特征的超高压变质岩早期变形举止。位于第二岩性一构造单元下部(770-1130m深度)300多米厚的韧性剪切带是地表出露的毛北韧性剪切带在孔下的延伸，剪切应变及石英组构分析表明，在伴随的退变质角闪岩相一绿帘角闪岩相一绿片岩相的转换过程中，剪切应变由自SE往NW的“逆冲”转为NW向SE的正向滑移。结合钻孔围区地质，重塑了上部由毛北榴辉岩杂岩体与副片麻岩围岩组成的轴面向SE倾斜的同斜倒转褶皱系，以及下部为韧性剪切带的构造模型。钻孔验证了VSP地震反射剖面中850-1200m深度的强反射层与韧性剪切带相吻合。结合苏鲁超高压变质地体的折返构造的研究，提出该构造模型的成因与折返阶段超高压变质地体的斜向上的挤出及后折返阶段的穹隆形成有关。 相似文献