首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 125 毫秒
1.
港域波浪数学模型的改进与验证   总被引:2,自引:0,他引:2  
通过物理模型对改进的港内波浪传播变形数学模型进行验证。该数学模型以推广的时变缓坡方程为控制方程,采用含松弛因子的ADI法求解,并对波浪反射和透射边界模拟方法进行改进。先通过物理模型试验确定斜向浪入射条件下抛石防波堤前的波浪反射系数,作为数学模型中部分反射边界模拟的依据。然后进行了一个典型港口内波浪折射、绕射和反射的模型试验,测量港内波浪分布。对比模型试验和数学模型计算的结果表明,数学模型可较好地模拟港内复杂地形和边界条件下规则波和不规则波的传播变形。  相似文献   

2.
多层挡板桩基透空式防波堤消浪特性试验研究   总被引:21,自引:4,他引:17  
本文回顾了已有的关于透空式防波堤的波浪透射率的理论计算方法,分析了多层挡板桩基透空式防波堤的消浪机理。结合防波堤断面波浪试验,探讨多层挡板桩基透空式防波堤的消浪特性。研究结果表明多层挡板桩基透空式防波堤能够显著消减波浪,它的应用突破了透空式防波堤仅适用于小尺度风浪水域的经验。研究发现影响防波堤消浪效果的因素中,挡板的透空率和设置方式的影响最为显著。文中提出的减小波浪透射率的方法可供设计部门参考。  相似文献   

3.
中咀湾是一个天然的避风良港,一般情况下外海波浪影响很小,主要受局部风场产生的局部风浪影响。本文采用曹宏生在Massel的扩展缓坡方程基础上推导出来的考虑陡变地形和能量耗散效应的缓坡方程为控制方程,结合固边界的反射边界条件,构成波浪传播变形的联合折射、绕射和反射的数学模型。文中将此方法运用在中国台州市大陈岛中咀湾避风港中,用波浪数学模型计算极端高水位和设计高水位时3种波况分别在3组重现期时工程海域的波浪要素,提供防波堤的堤前波高,并分析比较此处实心式和透空式防波堤的防浪性能。  相似文献   

4.
为使防波堤同时具有良好的掩护效果和水体交换能力,提出了两种带有透浪通道的新型直立式防波堤。基于Fluent求解器建立了三维数值波浪水槽,通过与试验结果对比,验证了该数值水槽求解波浪与透空堤作用具有较高的精度。对两种防波堤在规则波作用下的透浪特性进行了研究,结果表明:透射系数K_t与透空率呈正线性相关,且可通过调整透浪通道间距,使相同透空率下K_t降低20%~30%。对同一结构,K_t随相对波长的增大而显著增大,但受相对波高的影响较小。在透空率大于0.16后,异型沉箱防波堤的消浪性能明显优于错位沉箱。基于数值计算结果,给出了以上两种透空堤波浪透射系数的经验公式。  相似文献   

5.
垂直挡板式透空堤作为一种新型的透空式防波堤结构,通过将挡浪板垂直设置于波能最集中的水体表层来消减波浪,透浪系数是其最关键的指标。通过物理模型试验,分析不规则波作用下入射波高、波周期、挡板相对入水深度、相对堤宽、相对挡板超高、相对面板超高等因素对垂直挡板式透空堤透浪系数的影响规律,并在Wiegel公式的基础上拟合了垂直挡板式透空堤透浪系数的计算公式。可作为今后类似透空式防波堤结构透浪系数的近似估算,具有一定的参考价值。  相似文献   

6.
试验研究了多向随机波浪在直立式防波堤和斜坡式防波堤前的反射情况。在试验中,改变波浪要素(波陡、周期)、波浪入射角度(正向、斜向)和方向分布以及防波堤的坡度,以充分研究这些因素对波浪反射的影响。遗传算法用来分析多向随机波从建筑物的反射。试验结果表明,直立堤的反射系数基本上不随入射波浪方向变化,斜坡堤的反射系数随波浪峰频的增大和堤坡的变缓而减小,且随波浪方向有一定变化。还探讨了多向随机波浪在斜坡式防波堤上的反射面位置问题。  相似文献   

7.
设有挡浪板结构的透空式防波堤适用于水深较大的海域,且具有较好的消浪效果。采用物理模型试验,探究具有双侧挡浪板结构的透空式防波堤透浪系数与反射系数的影响因素与规律,研究包括外侧与内侧挡浪板入水深度,水平板板宽,结构上部挡浪墙的高度与位置,水平板超高与波浪要素等因素。通过比较各家透浪系数的理论计算公式与实验结果,进行透浪系数的计算方法研究,给出修正Wiegel公式拟合双侧挡浪板透空式防波堤的透浪系数计算公式,供工程设计参考与进一步研究。  相似文献   

8.
对透空管组成的防波堤波浪反射、传递系数和堤上波浪力等水动力学特征进行研究.在对透空管非线性消耗波能机理分析基础上,采用一种简单的线性化方法,导出一组所有参数都是事先知道的、完全封闭的公式.波浪反射系数和堤上波压力与波浪力计算结果与试验吻合较好.  相似文献   

9.
基于微幅波绕射理论,应用特征函数展开法,推导了双层直立圆弧型透空防波堤的波浪绕射解析解,从而将已有的比例边界有限元法拓展为解析算法,并据此对外层与内层防波堤所受波浪载荷进行了解析计算。计算结果表明:应用本文方法对直立透空圆环柱的绕射波浪载荷进行验证计算,所得结果与现有的解析解完全吻合,说明方法可靠。双层堤较单层堤能更有效地减弱波浪作用。波浪的入射角度和特征参数、防波堤张角与半径、防波堤透空系数以及水深等因素的相对变化对双层堤的波浪作用均存在一定影响。  相似文献   

10.
针对T型透空式防波堤,通过浪高仪采集防波堤前后不同位置波面变化曲线,使用声学多普勒流速仪(NDV)测量不同位置流速随时间的变化,并分析了其相位平均流速的分布。基于VOF法的二维波浪数值水槽,对规则波作用下T型防波堤附近的动力特性进行了计算,水槽模型试验结果和数值模拟结果对比表明,数值计算结果与实验值吻合较好。采用该模型进一步对T型防波堤附近波浪场、流线、紊动动能、紊动动能耗散率变化以及不同尺寸的防波堤消浪效果进行模拟计算,重点分析了入射波高、防波堤入水深度和防波堤宽度变化的影响。  相似文献   

11.
为了研究波浪与抛石潜堤相互作用过程中大自由表面变形和堤内渗流等强非线性紊流运动问题,利用改进的MPS法,建立了模拟波浪与抛石潜堤相互作用的MPS法数值计算模型。模型将抛石潜堤假定为均质多孔介质,采用Drew的二相流运动方程描述多孔介质内外的流体运动;通过在动量方程中增加非线性阻力项,并引入亚粒子尺度紊流模型,模拟波浪与可渗结构物相互作用过程中的紊流运动。选取“U”型管中多孔介质内渗流过程和孤立波与可渗潜堤相互作用两个典型的渗流问题,通过将数值计算结果与理论解和实测值的对比分析,对所提出的MPS法紊流渗流模型的模拟精度进行验证。结果表明:基于改进的MPS法构建的垂向二维紊流渗流模型可以很好地再现“U”型管中多孔介质内渗流以及波浪作用下可渗潜堤内外的复杂流场,显著缓解流-固界面处的压力震荡与粒子分布不均匀问题,实现了较高的模拟精度。  相似文献   

12.
The performance of the new wave diffraction feature of the shallow-water spectral model SWAN, particularly its ability to predict the multidirectional wave transformation around shore-parallel emerged breakwaters is examined using laboratory and field data. Comparison between model predictions and field measurements of directional spectra was used to identify the importance of various wave transformation processes in the evolution of the directional wave field. First, the model was evaluated against laboratory measurements of diffracted multidirectional waves around a breakwater shoulder. Excellent agreement between the model predictions and measurements was found for broad frequency and directional spectra. The performance of the model worsened with decreasing frequency and directional spread. Next, the performance of the model with regard to diffraction–refraction was assessed for directional wave spectra around detached breakwaters. Seven different field cases were considered: three wind–sea spectra with broad frequency and directional distributions, each coming from a different direction; two swell–sea bimodal spectra; and two swell spectra with narrow frequency and directional distributions. The new diffraction functionality in SWAN improved the prediction of wave heights around shore-parallel breakwaters. Processes such as beach reflection and wave transmission through breakwaters seem to have a significant role on transformation of swell waves behind the breakwaters. Bottom friction and wave–current interactions were less important, while the difference in frequency and directional distribution might be associated with seiching.  相似文献   

13.
Wave overtopping nearshore coastal structures, such as shore-parallel breakwaters, can significantly alter the current circulation and sediment transport patterns around the structures, which in turn affects the formation of tombolos and salients in the nearshore area. This paper describes the implementation of a wave overtopping module into an existing depth-averaged coastal morphological mode: COAST2D and model applications to investigate the effect of wave overtopping on the hydrodynamics and morphodynamics around a group of shore-parallel breakwaters. The hydrodynamic aspects of the model were validated against a series of laboratory conditions. The model was then applied to a study site at Sea Palling, Norfolk, UK, where 9 shore-parallel segmented breakwaters including 4 surface-piercing and 5 low-crested breakwaters are present, for the storm conditions in Nov 2006. The model results were compared with laboratory data and field measurements, showing a good agreement on both hydrodynamics and morphological changes. Further analysis of wave overtopping effect on the nearshore hydrodynamics and morphodynamics reveals that wave overtopping has significant impacts on the nearshore circulation, sediment transport and the resulting morphological changes within such a complex breakwater scheme under the storm and macro-tide conditions. The results indicate the importance of including the wave overtopping in modelling nearshore morphodynamics with the presence of coastal structures.  相似文献   

14.
In this study,we investigated wave transformation and wave set-up between a submerged permeable breakwater and a seawall.Modified time-dependent mild-slope equations,which involve parameters of the porous medium,were used to calculate the wave height transformation and the mean water level change around a submerged breakwater.The numerical solution is verified with experimental data.The simulated results show that modulations of the wave profile and wave set-up are clearly observed between the submerged breakwater and the seawall.In contrast to cases without a seawall,the node or pseudo-node of wave height evolution can be found between the submerged breakwater and the seawall.Higher wave set-up occurs if the nodal or pseudo-nodal point appears near the submerged breakwater.We also examined the influence of the porosity and friction factor of the submerged permeable breakwater on wave transformation and set-up.  相似文献   

15.
In this study, we investigated wave transformation and wave set-up between a submerged permeable breakwater and a seawall. Modified time-dependent mild-slope equations, which involve parameters of the porous medium, were used to calculate the wave height transformation and the mean water level change around a submerged breakwater. The numerical solution is verified with experimental data. The simulated results show that modulations of the wave profile and wave set-up are clearly observed between the submerged breakwater and the seawall. In contrast to cases without a seawall, the node or pseudo-node of wave height evolution can be found between the submerged breakwater and the seawall. Higher wave set-up occurs if the nodal or pseudo-nodal point appears near the submerged breakwater. We also examined the influence of the porosity and friction factor of the submerged permeable breakwater on wave transformation and set-up.  相似文献   

16.
Wave motions around different submerged structures   总被引:2,自引:1,他引:1  
WavemotionsarounddifferentsubmergedstructuresGaoXueping,InouchiKunimitsu,KakinumaTadao(ReceivedAugust11,1997;acceptedOctober2...  相似文献   

17.
A three-dimensional (3D) large-eddy-simulation model with macroscopic model equations of porous flow is proposed to investigate solitary waves interacting with permeable breakwaters. The major objective of this paper is twofold. First, we seek to evaluate the present model through the comparison with available simulated and measured data in the literature. The second aim, given the 3D nature of flow past a permeable breakwater, the variations of permeable breakwater modeled on both macroscopic and microscopic scales are examined. First validation is carried out with experiments on solitary wave propagation in a 3D wave basin and then runup on a vertical permeable breakwater with a gap in the lateral direction. A satisfactory agreement on the free surface elevation time series is obtained between model and measured results. Second, we replicate the experiments on a solitary wave interaction with a submerged permeable breakwater in a two-dimensional narrow wave flume. The porous medium is composed of spheres with a uniform size and arranged in a non-staggered regular pattern such that the porous medium can thus be modeled on macroscopic and microscopic scales. The numerical calculations indicate that the results obtained with macroscopic and microscopic modeling both fit the measurements fairly well in terms of the free surface elevations and velocity fields. Specifically, the microscopic modeling better simulates detailed phenomena such as flow injection from the porous medium and the initial stage of the formation of the main vortex in the leeward face of the obstacle. After the solitary wave completely propagates over the permeable object, the discrepancies between macroscopic and microscopic model results are insignificant. More accurate 3D results are used to determine the trajectories of fluid particles around the porous object to help understand the possible sediment movements in suspensions.  相似文献   

18.
基于成本共享理念的波浪能发电装置(WEC)的开发与设计为降低建设成本提供了新的研究思路,应用计算流体力学方法对在透空箱式防波堤前附加垂荡浮子的集成装置进行数值模拟研究,主要研究了流体黏性和非线性PTO系统以及浮子形状对此类集成装置能量转换效率的影响。结果表明,此类集成装置可以获得较高的波能捕获宽度比(CWR),最高可达0.7,可以较好地利用反射波波能。共振区间上受黏性影响较大,相比于线性无黏理论解,CWR下降明显;实现了2种非线性PTO系统的模拟,有待于进一步的优化未获得更高的CWR值;浮子形状优化效果明显,采用圆底形浮子受黏性影响更小,可以获得更大的CWR值。此种集成模型的模拟和研究可以为新型防波堤设计和现有防波堤的改造提供思路和参考。  相似文献   

19.
A Probabilistic Method for Motion Analysis of Caisson Breakwaters   总被引:2,自引:1,他引:2  
1 .IntroductionInrecent years ,especiallyfrom1994 when aninternational conference on breakwater design washeldinJapan,muchresearchonthe dynamic analysis of caisson breakwaters has been done ,and manyimportant progresses have been made .Oumeraci and Korten…  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号