首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 968 毫秒
1.
Gas washing has been known in the Tazhong area of the Tarim Basin, but its quantitative assessment has not yet been reported. Here the influence of gas washing fractionation in the area was discussed based on the gas chromatogram data of 68 oils and the results of the mixing experiments of a black oil and a condensate. The results show that the intensity of gas washing fractionation decreased generally from northern to southern part and vertically from deep reservoirs to shallow reservoirs. The gas washing fractionation was mainly controlled by fault systems in this area, with the increase of n-alkane mass depletion positively correlated to the number and scale of faults. Gas washing fractionation appears to have affected the hydrocarbon property, and as a result the diversity of the crude oils is markedly controlled by gas washing. In addition, the occurrence of waxy oil in this area may be resulted from multiple factors including gas washing, mixed filling and migration fractionation. Supported by National Basic Research Program of China (Grant No. 2006CB202303) and the National Natural Science Foundation of China (Grant No. 40672091)  相似文献   

2.
The Red Fault system is one of the main growth faults found in the South Eugene Island Basin, a salt withdrawal minibasin located offshore Louisiana, in the Gulf of Mexico. This fault system corresponds to a lateral boundary between fluid overpressured compartments. In addition, there is a set of observations indicating that the Red Fault system exhibits rapid episodic migration of fluids. This fault represents an example of preferential pathway for the upward episodic migration of overpressured hydrocarbons from deep, heavily pressured, compartments on time scales of years. The migrations of fluids into active growing faults could take the form of propagating surges (solitary waves) that propagate upward along the fault planes in a wave-like manner at km/yr. Solitary waves represent a very efficient mechanism for the upward transport of fluids along growth faults in sedimentary basins generating its own permeability. In addition, this mechanism is compatible with the fact that the fault plane is observed to sustain a static pore fluid pressure difference between its two sides. The propagation of solitary waves in active growth faults appears as a fundamental mechanism to understand the nature of upward fast migration of fluids along active growth faults in compartimentalized sedimentary basins.  相似文献   

3.
In this paper, near-fault strong ground motions caused by a surface rupture fault (SRF) and a buried fault (BF) are numerically simulated and compared by using a time-space-decoupled, explicit finite element method combined with a multi-transmitting formula (MTF) of an artificial boundary. Prior to the comparison, verification of the explicit element method and the MTF is conducted. The comparison results show that the final dislocation of the SRF is larger than the BF for the same stress drop on the fault plane. The maximum final dislocation occurs on the fault upper line for the SRF; however, for the BF, the maximum final dislocation is located on the fault central part. Meanwhile, the PGA, PGV and PGD of long period ground motions (≤1 Hz) generated by the SRF are much higher than those of the BF in the near-fault region. The peak value of the velocity pulse generated by the SRF is also higher than the BF. Furthermore, it is found that in a very narrow region along the fault trace, ground motions caused by the SRF are much higher than by the BF. These results may explain why SRFs almost always cause heavy damage in near-fault regions compared to buried faults. Supported by: National Natural Science Foundation of China Under Grant No. 50408003; National Scientific and Technical Supporting Programs Funded by Ministry of Science & Technology of China Under Grant No. 2006BAC13B01  相似文献   

4.
The Wenchuan earthquake of 12 May 2008 is the most destructive earthquake in China in the past 30 years in terms of property damage and human losses. In order to understand the earthquake process and the geo-morphological factors affecting the seismic hazard, we simulated the strong ground motion caused by the earthquake, incorporating three-dimensional (3D) earth structure, finite-fault rupture, and realistic surface topography. The simulated ground motions reveal that the fault rupture and basin structure control the overall pattern of the peak ground shaking. Large peak ground velocity (PGV) is distributed in two narrow areas: one with the largest PGV values is above the hanging wall of the fault and attributed to the locations of fault asperities and rupture directivity; the other is along the northwestern margin of the Sichuan Basin and caused by both the directivity of fault rupture and the amplification in the thick sediment basin. Rough topography above the rupture fault causes wave scattering, resulting in significantly larger peak ground motion on the apex of topographic relief than in the valley. Topography and scattering also reduce the wave energy in the forward direction of fault rupture but increase the PGV in other parts of the basin. These results suggest the need for a localized hazard assessment in places of rough topography that takes the topographic effects into account. Finally, had the earthquake started at the northeast end of the fault zone and ruptured to the southwest, Chengdu would have suffered a much stronger shaking than it experienced on 12 May, 2008. Supported by the U.S. National Science Foundation (Grant Nos. EAR 0738779 and OCE 0727919), the National Basic Research Program of China (Grant No. 2004CB418404), and partially by the National Nature Science Foundation of China (Grant No. 40521002)  相似文献   

5.
We have selected 171 near-field records from 391 aftershock records of the Lulong, Hebei Province, earthquake in October 1982 and relocated the hypocenter of 45 aftershocks using the program Hypoinverse. The distribution of aftershocks reveals a set of earthquake faults: a WNW stretching fault truncates two NNE stretching faults. The two branches of faults show the conjugate structure which is often seen in brittle fracture. The NNE stretching faults are connected together. The Luanhe river valley near Lulong developed to a rudiment rift basin surrounded by a series of faults. The fault of Lulong earthquake is a strike-slip fault with tension component. This fault type matches with the activity of Zhangjiakou-Bohai seismic belt (Zhang-Bo belt) and also shows the action of Zhang-Bo belt as a boundary of two secondary active blocks that truncates the NNE fault. Foundation item: National Natural Science Foundation of China (40234038). Contribution No. 05FE3016, Institute of Geophysics, China Earthquake Administration.  相似文献   

6.
In South China, the Wuqiangxi Formation of the Banxi Group and its equivalents underlie the early Cryogenian (Sturtian) glacial deposits but their thickness varies from <200 m to >2000 m. In the Guzhang section of western Hunan, the Wuqiangxi Formation is only 152 m thick, and an ash bed 58 m below the glacial diamictite yielded a SHRIMP U-Pb age of 809.3±8.4 Ma. In contrast, 90 km south of the Guzhang section towards the basin in Zhijiang area where the Wuqiangxi Formation is ~2200 m thick, an age of 725±10 Ma has been reported from the top of this unit, 300 m below the glacial diamictite. These ages provide new evidence for the regional stratigraphic correlation across the Nanhua basin, and suggest unusually large (>2 km) stratigraphic erosion potentially associated with the Sturtian glaciation in South China. The magnitude of erosion may imply significant uplifting and tectonotopography at the onset of the Sturtian glaciation.  相似文献   

7.
Geochronology of the volcanic rocks in the Lu-Zong basin and its significance   总被引：23，自引：0，他引：23  
The Lu-Zong (Lujiang-Zongyang) basin is one of the most important volcanic basins in the middle and lower reaches of the Yangtze River area, China. It comprises four shoshonitic volcanic units, which are, in an ascending order, the Longmenyuan, Zhuanqiao, Shuangmiao and Fushan Groups. The LA-ICP MS U-Pb zircon ages of the four units are: 134.8±1.8 Ma for the Longmenyuan Group, 134.1±1.6 Ma for the Zhuanqiao Group, 130.5±0.8 Ma for the Shuangmiao Group, and 127.1±1.2 Ma for the Fushan Group. The results indicate that all volcanic rocks in the Lu-Zong basin were formed in the Early Cretaceous from about 135 Ma to 127 Ma, lasting 8-10 Ma. There were no Jurassic volcanic activities in all the volcanic basins including the Lu-Zong basin in the middle and lower reaches of the Yangtze River area. This work has provided new chronological results for the further study and understanding of the tec- tonic, magmatic and metallogenic processes of eastern China in the Mesozoic.  相似文献   

8.
Traditional magneto-electric vibration sensors and servo accelerometers have severe shortcomings when used to measure vibration where low frequency components predominate. A low frequency characteristic extension for velocity vibration sensors is presented in this paper. The passive circuit technology, active compensation technology and the closedcycle pole compensation technology are used to extend the measurable range and to improve low frequency characteristics of sensors. Thses three types of low frequency velocity vibration sensors have been developed and widely adopted in China.  相似文献   

9.
The Taigu fault zone is one of the major 12 active boundary faults of the Shanxi fault-depression system, located on the eastern boundary of the Jinzhong basin. As the latest investigation indicated, the fault zone had dislocated gully terrace of the first order, forming fault-scarp in front of the loess mesa. It has been discovered in many places in ground surface and trenches that Holocene deposits were dislocated. The latest activity was the 1303 Hongdong earthquake M=8, the fault appeared as right-lateral strike-slip with normal faulting. During that earthquake, the Taigu fault together with the Mianshan western-side fault on the Lingshi upheaval and the Huoshan pediment fault on the eastern boundary of the Linfen basin was being active, forming a surface rupture belt of 160 km in length. Moreover, the Taigu fault were active in the mid-stage of Holocene and near 7 700 aB.P. From these we learnt that, in Shanxi fault-depression system, the run-through activity of two boundary faults of depression-basins might generate great earthquake with M=8. Foundation item: Chinese Joint Seismological Science Foundation (201017). Contribution No. 2003A004, Institute of Crust Dynamics, China Earthquake Administration.  相似文献   

10.
Changkeng Au-Ag deposit is a newly-discovered new type precious metal deposit. N2-Ar-He systematics studies and3He/4He and δD- δ18O composition analyses show that the ore-forming fluid of the deposit is composed mainly of formation water (sedimentary brine) but not of meteoric water, which was thought to be source of the ore-forming fluid by most previous researchers. The content of mantle-derived magmatic water in the ore-forming fluid is quite low, usually lower than 10%. According to the source of the ore-forming fluid, the Changkeng Au-Ag deposit should belong to sedimentary brine transformed deposits. From the Late Jurassic to the Early Cretaceous Period, with deposition and accumulation of thick sediments in Sanzhou Basin, the formation water in the sedimentary layers was expelled from the basin because of overburden pressure and increasing temperature. The expelled fluid moved laterally along sedimentary layers to the margin of the basin, and finally moved upward along a gently-dipping interlayer fault. Because of a decline in pressure and temperature, ore minerals were deposited in the fault. Project supported by the National Natural Science Foundation of China (Grant No. 495020291, the Natural Science Foundation of Zhongshan University, the Research Foundation of National Key Laboratory of Metallogenesis in Nanjing University (Grant No. 039704) and the Lingnan Foundation.  相似文献   

11.
Re-measured GPS data have recently revealed that a broad NE trending dextral shear zone exists in the eastern Bayan Har block about 200 km northwest of the Longmenshan thrust on the eastern margin of the Qinghai-Tibet Plateau. The strain rate along this shear zone may reach up to 4-6 mm/a. Our interpretation of satellite images and field observations indicate that this dextral shear zone corresponds to a newly generated NE trending Longriba fault zone that has been ignored before. The northeast segment of the Longriba fault zone consists of two subparallel N54°±5°E trending branch faults about 30 km apart, and late Quaternary offset landforms are well developed along the strands of these two branch faults. The northern branch fault, the Longriqu fault, has relatively large reverse component, while the southern branch fault, the Maoergai fault, is a pure right-lateral strike slip fault. According to vector synthesizing principle, the average right-lateral strike slip rate along the Longriba fault zone in the late Quaternary is calculated to be 5.4±2.0 mm/a, the vertical slip rate to be 0.7 mm/a, and the rate of crustal shortening to be 0.55 mm/a. The discovery of the Longriba fault zone may provide a new insight into the tectonics and dynamics of the eastern margin of the Qinghai-Tibet Plateau. Taken the Longriba fault zone as a boundary, the Bayan Har block is divided into two sub-blocks: the Ahba sub-block in the west and the Longmenshan sub-block in the east. The shortening and uplifting of the Longmenshan sub-block as a whole reflects that both the Longmenshan thrust and Longriba fault zone are subordinated to a back propagated nappe tectonic system that was formed during the southeastward motion of the Bayan Har block owing to intense resistance of the South China block. This nappe tectonic system has become a boundary tectonic type of an active block supporting crustal deformation along the eastern margin of the Qinghai-Tibet Plateau from late Cenozoic till now. The Longriba fault zone is just an active fault zone newly-generated in late Quaternary along this tectonic system.  相似文献   

12.
Granites sampled from Garzê-Litang thrust, Longmen Shan thrust, Garzê and Litang strike-slip faults in the eastern Tibetan Plateau have been analyzed with apatite fission track thermochronological method in this study. The measured fission track apparent ages, combined with the simulated annealing mod- eling of the thermal history, have been used to reconstruct the thermal evolutionary histories of the samples and interpret the active history of the thrusts and faults in these areas. Thermal history mod- eling shows that earlier tectonic cooling occurred in the Garzê-Litang thrust in Miocene (~20―16 Ma) whereas the later cooling occurred mainly in the Longmen Shan thrust since ~5 Ma. Our study sug- gests that the margin of eastern Tibetan Plateau was extended by stages: through strike-slip faults deformations and related thrusts, the upper crust formed the Garzê-Litang margin in the Miocene epoch and then moved to the Longmen Shan margin since ~5 Ma. During this process, the deformations of different phases in the eastern Tibetan Plateau were absorbed by the thrusts within them and conse- quently the tectonic events of long-distance slip and extrusion up to hundreds of kilometers have not been found.  相似文献   

13.
The Junggar Basin is one of the largest and most petroliferous superimposed petroleum basins in China. The central depression area has become the frontier field for petroleum exploration. The characteristics of potential source rocks and reservoir sandstones, and the pressure regime in the central Junggar Basin were studied. Permian shales are dominated by hydrogen-rich, oil-prone algal organic matter, and Jurassic mudstones are dominated by hydrogen-poor, higher-plant derived organic matter. These source rocks are widespread and have been mature for hydrocarbon generation, suggesting good to excellent exploration potential, both for crude oils and for natural gases. The deeply buried Jurassic sandstones usually have low porosity and permeability. However, sandstones beneath the Jurassic/Cretaceous unconformity display relatively high porosity and permeability, suggesting that meteoric water leaching had improved the quality of the sandstones. Overpressure developed over much of the central Junggar Basin. The overpressured rocks are characterized by slightly increased interval transit time, low sandstone permeability, increased organic matter maturity, and high relative hydrocarbon-gas contents. Mudstones in the overpressured system have quite the same clay mineral compositions as mudstones in the lower part of the normally pressured system. Overpressure generation in the central Junggar Basin is best to be explained as the result of hydrocarbon generation and fluid retention in low-permeability rocks. Petroleum generated from Permian and Jurassic source rocks could migrate laterally through preferential petroleum migration pathways and accumulated in structural traps or lithological traps in the overpressured system, or migrate vertically through faults/hydraulic fractures into the overlying, normally pressured system and accumulate in structural or lithological traps. Therefore, commercial petroleum reservoirs could be potentially found in both the overpressured system, and in the normally pressured system.  相似文献   

14.
A preliminary study of b value of rocks with two kinds of structural models has been made on the base of a new acoustic emission recording system. It shows that b value of the sample decreases obviously when the sample with compressive en echelon faults changes into a tensile one after interchange occurs between stress axis σ 1 and σ 2. A similar experiment is observed when the sample with tensile en echelon faults changes into that with a bend fault after two segments of the en echelon fault linking up. These facts indicate that the variation of b value may contain the information of the regional dominant structural model. Therefore, b-value analyses could be a new method for studying regional dominant structural models. Foundation item: National Natural Science Foundation of China (Grant No. 40072067) and Minister of Science and Technology of China (2004BA601B01).  相似文献   

15.
The spatial distribution map of 65 mid-large gold-deposits hosted in the granite-greenstone terrains of the North China Craton is first drawn. These gold deposits mainly concentrate in the Mesozoic remobilized Yinshan-Yan-shan-Liaoning-Jilin intracontinental collisional orogenic belt, the northern Qinling and the Jiaodong Mesozoic collisional orogenic belts, and the Mesozoic intracontinental fault-magmatic belts developed along the Taihangshan and the Tan-Lu faults; their mineralizing time is predominantly Jurassic-Cretaceous, i. e. the Yanshanian. The metallogenic geodynamic background is exactly the compression-to-extension transition regime during continental collision. The results are partly from the project entitled “The main types of gold mineralizations in China and their metallogenic model” (89-El) supported by the Ministry of Metallurgical Industry of China, and projects “Geology and metallogenesis of the main type gold deposits in East Chinan” (Grant No. 9488010) and “Study on ore-forming fluids of the Wangfeng gold deposit, Xinjiang” supported by the National Natural Science Foundation of China (Grant No. 49672119).  相似文献   

16.
Typical contourite deposits associated with submarine turbidite fan deposits are recognized for the first time from the Lower Devonian Liptrap Formation at Cape Liatrap, Victoria in southeast Australia. The contourites are well integrated within the turbidite fan deposits and are characterized by thin (5-8 cm), lenticular, well-sorted coarse-grained siltstones to fine-grained sandstones with current-ripples and cross beddings. The palaeocurrent directions of the turbidite fan and contourites are perpendicular to each other, with the former directed generally westward while the latter varying from 165° to 190° southward. In view of the facies types and architecture, we suggest that the turbidite fan was developed at the base of a westward inclined palaeo-slope, at the front of which the contourites were deposited as a result of southward flowing deep-sea contour (geostrophic) currents. The depositional setting inter- preted for the Liptrap Formation thus may provide a provisional model for the Lower Devonian conti- nental slope and abyssal basin environment in the southeastern part of the Melbourne Trough.  相似文献   

17.
The Anninghe fault is one of the significant earthquake-generating fault zones in the Southwest China. Local his-torical record shows that a M≥7 strong earthquake occurred in the year of 1536. On the basis of the detailed air-photographic interpretation and field investigation, we have acquired the following knowledge: 1 The average sinistral strike-slip rate since the Late Pleistocene is about 3~7 mm/a; 2 There is important reverse faulting along the fault zone besides the main left-lateral strike-slip motion, and the shortening rate across the Anninghe fault zone due to the reverse faulting is about 1.7~4.0 mm/a. If the Xianshuihe fault zone is simply partitioned into the Anninghe and Daliangshan faults, we can also get a slip rate of 3~7 mm/a along the Daliangshan fault zone, which is the same as that on the Anninghe fault zone. Moreover, on the basis of our field investigation and the latest knowledge concerning the active tectonics of Tibetan crust, we create a dynamic model for the Anninghe fault zone.  相似文献   

18.
Exposed in natural outcrops near the Duibian Village, Jiangshan County, Zhejiang Province, China, the Duibian B section is proposed as the boundary stratotype for the base of an unnamed stage termed provisionally Cambrian Stage 9. The proposed position of the GSSP is 108.12 m above the base of the Huayansi Formation, at a horizon coinciding with the first appearance of the cosmopolitan agnostoid trilobite Agnostotes orientalis. This horizon coincides also with the first appearance of the cosmopolitan polymerid trilobite Irvingella angustilimbata. The section fulfills all the requirements for a GSSP, and the horizon can be constrained not only by the primary stratigraphic marker (A. orientalis) but also with secondary biostratigraphic, chemostratigraphic, and sequence-stratigraphic correlation tools. The first appearance of A. orientalis is one of the most readily recognizable levels in Cambrian, and can be correlated with precision to all paleocontinents. Supported by Chinese Academy of Sciences (Grant No. KZCX2-YW-122), the Ministry of Science and Technology of China (Grant Nos. 2006FY120300, 2006CB806400), National Natural Science Foundation of China (Grant Nos. 40072003, 40023002, 40332018, 40672023, 40602002), and the U.S. National Science Foundation (Grant No. EAR-0106883)  相似文献   

19.
A geochronological study of zircon U-Pb on the volcanic rocks from the stratotype section of the Qingshan Group within the Jiaozhou Basin, eastern Shandong Province, is presented. The zircons were analyzed using the method of in situ ablation of a 193 nm excimer laser system coupled with an up to date ICP-MS system. Among the three formations of the Qingshan Group, zircons recovered from the lowest part of the Houkuang Fm. were dated at 106±2 Ma (95% confidence, the same below), whereas those from the lower and upper parts of the Shiqianzhuang Fm. were given ages of 105±4 Ma and 98±1 Ma, respectively. A spatially decreasing trend for the Mesozoic magmatic timing from west to east in the province is observed through comparing the data of this study with those by previous works on the Qingshan volcanic lavas occurring at western Shandong and within the Yishu fault zone. The Qingshan volcanic rocks are constituent of the 'Shoshonite Province' in East China. Exposed at most provinces of central East China along the Tan-Lu fault and the Yangtze fault zones, these volcanic suites are characterized by shoshonite and high-K calcalkalic rocks in lithology and thought to be correlated with the partial melting of continental mantle in genesis. It is also shown that the Qingshan potassic volcanic suite from eastern Shandong basins is distinctly younger than those from other ar-eas of the shoshonite province. By contrary, ages of the Mesozoic to Cenozoic alkaline basalts, sourced by asthenospheric mantle, from both northern Huaiyan basin and northern Dabie belt along the Tan-Lu fault zone and from the Ningwu, Lishui and Luzong basins along the Yangtze fault zone are observably older than those occurring within eastern Shandong. The revealed temporal and spatial patterns in magmatism for the two types of volcanic suites make an important geochronological con-straint on the Mesozoic to Cenozoic dynamic evolution model of the subcontinental lithosphere in East China.  相似文献   

20.
Evidence of fluid interaction with normal faults comes from their varied role as flow barriers or conduits in hydrocarbon basins and as hosting structures for hydrothermal mineralisation, and from fault-rock assemblages in exhumed footwalls of steep active normal faults and metamorphic core complexes. These last suggest involvement of predominantly aqueous fluids over a broad depth range, with implications for fault shear resistance and the mechanics of normal fault reactivation. A general downwards progression in fault rock assemblages (high-level breccia-gouge (often clay-rich) → cataclasites → phyllonites → mylonite → mylonitic gneiss with the onset of greenschist phyllonites occurring near the base of the seismogenic crust) is inferred for normal fault zones developed in quartzo-feldspathic continental crust. Fluid inclusion studies in hydrothermal veining from some footwall assemblages suggest a transition from hydrostatic to suprahydrostatic fluid pressures over the depth range 3–5 km, with some evidence for near-lithostatic to hydrostatic pressure cycling towards the base of the seismogenic zone in the phyllonitic assemblages. Development of fault-fracture meshes through mixed-mode brittle failure in rock-masses with strong competence layering is promoted by low effective stress in the absence of thoroughgoing cohesionless faults that are favourably oriented for reactivation. Meshes may develop around normal faults in the near-surface under hydrostatic fluid pressures to depths determined by rock tensile strength, and at greater depths in overpressured portions of normal fault zones and at stress heterogeneities, especially dilational jogs. Overpressures localised within developing normal fault zones also determine the extent to which they may reutilise existing discontinuities (for example, low-angle thrust faults). Brittle failure mode plots demonstrate that reactivation of existing low-angle faults under vertical σ1 trajectories is only likely if fluid overpressures are localised within the fault zone and the surrounding rock retains significant tensile strength. Migrating pore fluids interact both statically and dynamically with normal faults. Static effects include consideration of the relative permeability of the faults with respect to the country rock, and juxtaposition effects which determine whether a fault is transmissive to flow or acts as an impermeable barrier. Strong directional permeability is expected in the subhorizontal σ2 direction parallel to intersections between minor faults, extension fractures, and stylolites. Three dynamic mechanisms tied to the seismic stress cycle may contribute to fluid redistribution: (i) cycling of mean stress coupled to shear stress, sometimes leading to postfailure expulsion of fluid from vertical fractures; (ii) suction pump action at dilational fault jogs; and, (iii) fault-valve action when a normal fault transects a seal capping either uniformly overpressured crust or overpressures localised to the immediate vicinity of the fault zone at depth. The combination of σ2 directional permeability with fluid redistribution from mean stress cycling may lead to hydraulic communication along strike, contributing to the protracted earthquake sequences that characterise normal fault systems.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号