共查询到20条相似文献，搜索用时 142 毫秒
1.
When treating the forward full waveform case, a fast and accurate algorithm for modelling seismic wave propagation in anisotropic inhomogeneous media is of considerable value in current exploration seismology. Synthetic seismograms were computed for P-SV wave propagation in transversely isotropic media. Among the various techniques available for seismic modelling, the finite-difference method possesses both the power and flexibility to model wave propagation accurately in anisotropic inhomogeneous media bounded by irregular interfaces. We have developed a fast high-order vectorized finite-difference algorithm adapted for the vector supercomputer. The algorithm is based on the fourth-order accurate MacCormack-type splitting scheme. Solving the equivalent first-order hyperbolic system of equations, instead of the second-order wave equation, avoids computation of the spatial derivatives of the medium's anisotropic elastic parameters. Examples indicate that anisotropy plays an important role in modelling the kinematic and the dynamic properties of the wave propagation and should be taken into account when necessary. 相似文献
2.
A new wave equation is derived for modelling viscoacoustic wave propagation in transversely isotropic media under acoustic transverse isotropy approximation. The formulas expressed by fractional Laplacian operators can well model the constant-Q (i.e. frequency-independent quality factor) attenuation, anisotropic attenuation, decoupled amplitude loss and velocity dispersion behaviours. The proposed viscoacoustic anisotropic equation can keep consistent velocity and attenuation anisotropy effects with that of qP-wave in the constant-Q viscoelastic anisotropic theory. For numerical simulations, the staggered-grid pseudo-spectral method is implemented to solve the velocity–stress formulation of wave equation in the time domain. The constant fractional-order Laplacian approximation method is used to cope with spatial variable-order fractional Laplacians for efficient modelling in heterogeneous velocity and Q media. Simulation results for a homogeneous model show the decoupling of velocity dispersion and amplitude loss effects of the constant-Q equation, and illustrate the influence of anisotropic attenuation on seismic wavefields. The modelling example of a layered model illustrates the accuracy of the constant fractional-order Laplacian approximation method. Finally, the Hess vertical transversely isotropic model is used to validate the applicability of the formulation and algorithm for heterogeneous media. 相似文献
3.
Anisotropic reverse-time migration for tilted TI media 总被引：1，自引：0，他引：1
Seismic anisotropy in dipping shales results in imaging and positioning problems for underlying structures. We develop an anisotropic reverse‐time depth migration approach for P‐wave and SV‐wave seismic data in transversely isotropic (TI) media with a tilted axis of symmetry normal to bedding. Based on an accurate phase velocity formula and dispersion relationships for weak anisotropy, we derive the wave equation for P‐wave and SV‐wave propagation in tilted transversely isotropic (TTI) media. The accuracy of the P‐wave equation and the SV‐wave equation is analyzed and compared with other acoustic wave equations for TTI media. Using this analysis and the pseudo‐spectral method, we apply reverse‐time migration to numerical and physical‐model data. According to the comparison between the isotropic and anisotropic migration results, the anisotropic reverse‐time depth migration offers significant improvements in positioning and reflector continuity over those obtained using isotropic algorithms. 相似文献
4.
JAN DOUMA 《Geophysical Prospecting》1989,37(7):831-849
Media containing aligned cracks or ellipsoidal inclusions as well as media consisting of sequences of isotropic layers show transverse isotropy with respect to elastic wave propagation. However, the transversely isotropic media which are equivalent to media containing aligned inclusions do not necessarily have to be representable by sequences of stable isotropic layers. These transversely isotropic media can be modelled by such sequences if - and only if - several stability conditions are satisfied. Important parameters determining whether these conditions are satisfied are the aspect ratio of the inclusions and the material filling the inclusions, the‘fluid’. An analytical expression describing the range of aspect ratios for which the constraints are satisfied can be derived. This expression (which is a good approximation for several crack models) and numerical calculations show that media containing water-filled inclusions can be represented by sequences of stable isotropic layers if the inclusions have aspect ratios less than 0.1. The limiting aspect ratio decreases for a decreasing ratio of the bulk modulus of the fluid to the shear modulus of the matrix material. Finally, media containing dry inclusions of any aspect ratio cannot be modelled by thin isotropic layering. These results depend only weakly on the crack density and on the matrix material. The representation of crack-induced anisotropy by layer-induced anisotropy can be used to classify crack-induced anisotropy and might be useful in the separation of the cause of anisotropy and the determination of the nature of the fluid. 相似文献
5.
THE APPLICATION OF PML BOUNDARY CODITIONS IN THE SIMULATION OF SEISMIC WAVE BY THE HIGH-ORDER STAGGERED-GRID FINITE DIFFERENCES AT THE TRANSVERSELY ISOTROPIC MEDIA 
下载免费PDF全文
下载免费PDF全文 In the realm of the numerical simulation, finite difference method and finite element method are more intuitive and effective than other simulation methods. In the process of simulating seismic wave propagation, the finite differences method is widely used because of its high computational efficiency and the advantage of the algorithm is more efficient. With the demand of precision, more and more researchers have proposed more effective methods of finite differences, such as the high-order staggered-grid finite differences method, which can restore the actual process of wave propagation on the premise of ensuring accuracy and improving the efficiency of operation. In the past numerical simulation of seismic wave field, different models of isotropic medium are mostly used, but it is difficult to reflect the true layer situation. With the research demand of natural seismology and seismic exploration, the research on anisotropic media is more and more extensive. Transversely isotropic(TI)media can well simulate the seismic wave propagation in the formation medium, such as gas-bearing sandstone, mudstone, shale et al., the character of TI media is reflected by introducing the Thomsen parameters to reflect its weak anisotropy of vertical direction by using Thomson parameter. Therefore, studying the process of seismic wave propagation in TI media can restore the true information of the formation to the greatest extent, and provide a more reliable simulation basis for the numerical simulation of seismic wave propagation. In the geodynamic simulation and the numerical simulation of the seismic wave field, under the limited influence of the calculation area, if no boundary conditions are added, a strong artificial boundary reflection will be generated, which greatly reduces the validity of the simulation. In order to minimize the influence of model boundaries on the reflection of seismic waves, it is often necessary to introduce absorbing boundary conditions. At present, there are three types of absorption boundary conditions: one-way wave absorption boundary, attenuation absorption boundary, and perfectly matched layer(PML)absorption boundary. In terms of numerical simulation of seismic waves, the boundary absorption effect of PML is stronger than the first two, which is currently the most commonly used method, and it also represents the cutting-edge development direction of absorption boundary technology. The perfectly matched layer absorbing boundary is effectively applied to eliminating the reflective waves from model boundaries, but for transversely isotropic medium, the effect of the absorbing is not very well. For this reason, the elastic dynamic wave equations in transversely isotropic media are derived, and we describe a second-order accurate time, tenth-order accurate space, formulation of the Madariaga-Virieux staggered-grid finite difference methods with the perfectly matched layer(PML)are given. In addition, we have established vertical transversely isotropic(VTI)media and arbitrary inclined tilted transversely isotropic(TTI)media models, using a uniform half-space velocity model and a two-layer velocity model, respectively. By combining the actual geoscience background, we set the corresponding parameters and simulation conditions in order to make our model more research-oriented. When setting model parameters, different PML thickness, incident angle, source frequency and velocity layer models were transformed to verify the inhibition of boundary reflection effect by PML absorption boundary layer. The implementations of this simulation show that the formula is correct and for the transversely isotropic(TI)media of any angular symmetry axis, when the thickness of the PML layer reaches a certain value, the seismic wave reflection effect generated by the artificial boundary can be well suppressed, and the absorption effect of PML is not subject to changes in incident angle and wave frequency. Therefore, the results of our study indicate that our research method can be used to simulate the propagation process of seismic waves in the transversely isotropic(TI)media without being affected by the reflected waves at the model boundary to restore the actual formation information and more valuable geological research. 相似文献
6.
转换波四参数速度分析方法在k71地区的应用 总被引：1，自引：0，他引：1
3-D converted-wave data were acquired using digital MEMS （micro-electromechanical system） three component （3C） sensors in the alternating sand and shale sequence in the overburden of the Shengli Ken-71 area. This gives rise to serious non-hyperbolic moveout effects in the converted-wave data due to both the asymmetrical ray path and anisotropic effects. Conventional velocity analysis and moveout correction based on isotropic methods do not flatten reflections events. Here, we use a four-parameter theory to evaluate these effects and process the data. These four parameters include the PS converted wave stacking velocity （Vc2）, the vertical velocity ratio （Y0）, the effective velocity ratio （Yeff）, and the anisotropy parameter （xoff）, The method utilizes the moveout information at different offsets to estimate the different parameters and ensures that the events are properly aligned for stacking, As a result, this four-parameter theory leads to an improvement in imaging quality and correlation between the P-waves and converted-waves. 相似文献
7.
Perturbation methods are common tools for describing wave propagation in weakly anisotropic media. The anisotropic medium is replaced by an average isotropic medium where wave propagation can be treated analytically and the correction for the effect of anisotropy is computed by perturbation techniques. This works well for anisotropies of up to 10%. Some materials (e.g. shales), however, can exhibit a much stronger anisotropy. In this case a background is required which still can be treated analytically but is applicable to stronger P-wave anisotropy. We present an averaging technique to compute a best-fitting ellipsoidal medium to an arbitrary anisotropic medium. Ellipsoidal media are sufficiently simple for analytical expressions to be available for many applications and allow consideration of strong P-wave anisotropy. The averaging of the arbitrary anisotropic medium can be carried out globally (i.e. for the whole sphere) or sectorially (e.g. for seismic waves propagating predominantly in the vertical direction). We derive linear relationships for the coefficients of the ellipsoid which depend on the elastic coefficients of the anisotropic medium. We also provide specifications for best-fitting elliptical and best-fitting isotropic media. Numerical examples for different rocks demonstrate the improved approximation of the anisotropic model obtained using the formulae derived, compared with the conventionally used average isotropic medium. 相似文献
8.
准确模拟TTI介质中弹性波的传播是研究地震各向异性、AVO反演的基础. 在二维加权近似解析离散化(WNAD)算法的基础上, 本文发展的并行WNAD算法是一种研究三维横向各向同性(TI)介质中弹性波传播的、快速高效的数值模拟方法. 我们首先介绍三维WNAD方法的构造过程, 然后与经典的差分格式--交错网格(SG)算法进行了比较. 理论分析和数值算例表明, WNAD算法比交错网格算法更适合在高性能计算机上进行大规模弹性波场模拟. 同时, 本文利用并行的WNAD方法研究了弹性波在TTI介质中的传播规律, 观测了TI介质中弹性波传播的重要特征:横波分离、体波耦合和速度各向异性等. 在TTI介质分界面处, 弹性波产生更加复杂的折射、反射和波型转化, 使得波场非常复杂, 研究和辨别不同类型的波能够加深我们对由裂隙诱导的各向异性介质的认识. 相似文献
9.
Pure-mode wave propagation is important for applications ranging from imaging to avoiding parameter tradeoff in waveform inversion. Although seismic anisotropy is an elastic phenomenon, pseudo-acoustic approximations are routinely used to avoid the high computational cost and difficulty in decoupling wave modes to obtain interpretable seismic images. However, such approximations may result in inaccuracies in characterizing anisotropic wave propagation. We propose new pure-mode equations for P- and S-waves resulting in an artefact-free solution in transversely isotropic medium with a vertical symmetry axis. Our approximations are more accurate than other known approximations as they are not based on weak anisotropy assumptions. Therefore, the S-wave approximation can reproduce the group velocity triplications in strongly anisotropic media. The proposed approximations can be used for accurate modelling and imaging of pure P- and S-waves in transversely isotropic media. 相似文献
10.
目前在地震勘探频带范围内通常假设品质因子Q与频率无关,且呈衰减各向同性.事实上,相比较速度各向异性,介质的衰减各向异性同样不可忽视.本文将衰减各向异性和速度各向异性二者与常Q模型相结合,建立了黏弹性衰减VTI介质模型,并基于分数阶时间导数理论,给出了对应的本构关系和波动方程.利用均匀平面波分析和Poynting定理,推导出准压缩波qP、准剪切波qSV和纯剪切波SH的复速度、相速度、能量速度以及品质因子的解析表达式.对模型的正确性进行了数值验证,并分析了qP,qSV和SH波在介质中的传播特性.数值试验结果表明:本模型能够实现理想的恒定Q行为,表现了品质因子和速度的各向异性特征,显示出黏弹性增强将导致能量速度和相速度的频散曲线变化剧烈;速度和衰减各向异性参数与传播角度之间的耦合效应对qP,qSV和SH波的速度和能量影响明显;qP,qSV和SH波的频散曲线和波前面随着衰减各向异性强度的改变发生显著变化,其中耦合在一起的qP和qSV波变化趋势相同,而SH波与它们呈现相反的变化规律.本研究为从常Q模型角度分析地震波在衰减各向异性黏弹性介质中的传播特征奠定了理论基础. 相似文献
11.
3D P‐wave traveltime computation in transversely isotropic media using layer‐by‐layer wavefront marching 下载免费PDF全文
下载免费PDF全文 Jiangtao Hu Junxing Cao Huazhong Wang Xingjian Wang Renfei Tian 《Geophysical Prospecting》2018,66(7):1303-1314
Subsurface rocks (e.g. shale) may induce seismic anisotropy, such as transverse isotropy. Traveltime computation is an essential component of depth imaging and tomography in transversely isotropic media. It is natural to compute the traveltime using the wavefront marching method. However, tracking the 3D wavefront is expensive, especially in anisotropic media. Besides, the wavefront marching method usually computes the traveltime using the eikonal equation. However, the anisotropic eikonal equation is highly non‐linear and it is challenging to solve. To address these issues, we present a layer‐by‐layer wavefront marching method to compute the P‐wave traveltime in 3D transversely isotropic media. To simplify the wavefront tracking, it uses the traveltime of the previous depth as the boundary condition to compute that of the next depth based on the wavefront marching. A strategy of traveltime computation is designed to guarantee the causality of wave propagation. To avoid solving the non‐linear eikonal equation, it updates traveltime along the expanding wavefront by Fermat's principle. To compute the traveltime using Fermat's principle, an approximate group velocity with high accuracy in transversely isotropic media is adopted to describe the ray propagation. Numerical examples on 3D vertical transverse isotropy and tilted transverse isotropy models show that the proposed method computes the traveltime with high accuracy. It can find applications in modelling and depth migration. 相似文献
12.
Munirdin Tohti Yibo Wang Evert Slob Yikang Zheng Xu Chang Yi Yao 《Geophysical Prospecting》2020,68(6):1927-1943
Seismoelectric coupling in an electric isotropic and elastic anisotropic medium is developed using a primary–secondary formulation. The anisotropy is of vertical transverse isotropic type and concerns only the poroelastic parameters. Based on our finite difference time domain algorithm, we solve the seismoelectric response to an explosive source. The seismic wavefields are computed as the primary field. The electric field is then obtained as a secondary field by solving the Poisson equation for the electric potential. To test our numerical algorithm, we compared our seismoelectric numerical results with analytical results obtained from Pride's equation. The comparison shows that the numerical solution gives a good approximation to the analytical solution. We then simulate the seismoelectric wavefields in different models. Simulated results show that four types of seismic waves are generated in anisotropic poroelastic medium. These are the fast and slow longitudinal waves and two separable transverse waves. All of these seismic waves generate coseismic electric fields in a homogenous anisotropic poroelastic medium. The tortuosity has an effect on the propagation of the slow longitudinal wave. The snapshot of the slow longitudinal wave has an oval shape when the tortuosity is anisotropic, whereas it has a circular shape when the tortuosity is isotropic. In terms of the Thomsen parameters, the radiation anisotropy of the fast longitudinal wave is more sensitive to the value of ε, while the radiation anisotropy of the transverse wave is more sensitive to the value of δ. 相似文献
13.
随着计算机硬件技术的发展以及高分辨率勘探需求的增加,我们希望能够更准确地模拟地下介质,得到更丰富的地层信息.然而,传统的声学假设并不能描述实际地层所存在各向异性和黏滞性,使得成像分辨率较低.为了实现深部储层的高精度成像,本文同时考虑了介质的各向异性和黏滞性,从TI介质弹性波的基本理论出发,结合各向异性GSLS理论,并通过声学近似方法导出基于GSLS模型的各向异性衰减拟声波方程.数值模拟表明该方程既能准确地描述各向异性介质下的准P波运动学规律,又能体现地层的吸收衰减效应;模型逆时偏移结果表明,在实现成像过程中考虑各向异性和黏滞性的影响,能对高陡构造清晰成像,且剖面振幅相对均衡,分辨率较高. 相似文献
14.
In-seam seismic surveys with channel waves have been widely used in the United Kingdom and elsewhere to map coal-seams and to detect anomalous features such as dirt bands, seam thinning and thickening, and particularly in-seam faulting. Although the presence of cleat-induced anisotropy has been recognized in the past, almost all previous analyses have assumed homogeneous isotropic or transversely isotropic coal-seams. Channel waves, however, exhibit properties which cannot be fully explained without introducing anisotropy into the coal-seam. In particular, Love-type channel waves are observed for recording geometries where, in a homogeneous isotropic or transversely isotropic structure, the source would not be expected to excite transverse motion. Similarly, modes of channel-wave propagation display the coupled three-component motion of generalized modes in anisotropic substrates, which would not be expected for Rayleigh and Love wave motion in isotropy or in transversely isotropic media with azimuthal isotropy. We model the observed in-seam seismic channel waves with synthetic seismograms to gain an understanding of the effects of cleat-induced anisotropy on the behaviour of channel waves. The results show a reasonable good match with the observations in traveltime, relative amplitudes, dispersion characteristics and particle motions. We demonstrate that anisotropy in the surrounding country rocks contributes significantly to the coupling of channel wave particle motion, although its effect is not as strong as the anisotropy in the coal-seam. We conclude that the effects of cleat- and stress-induced anisotropy are observed and can be modelled with synthetic seismograms, and that anisotropy must be taken into account for the detailed interpretation of channel waves. 相似文献
15.
On shear-wave triplication in transversely isotropic media 总被引：1，自引：0，他引：1
The exact solution to the problem of qSV triplication in homogenous transversely isotropic media has been long known, but the result is algebraically complex and is seldom applied in practice. We present an appropriate approximation (not assuming weak qSV-anisotropy) that simplifies the conditions for the onset of off-axis triplication as anisotropy is increased, identifying the anisotropy parameter σ as the controlling parameter. It follows that commonly reported surface-seismic P-wave move-out measurements imply that many formations in the earth's sedimentary crust support off-axis qSV triplications. For typical Vp/Vs velocity ratios and a horizontally stratified earth, however, off-axis qSV triplications appear to only occur for shear-wave incidence angles too far from the vertical to be sampled by surface-seismic converted-wave survey geometries. 相似文献
16.
Pure acoustic wave propagation in transversely isotropic media by the pseudospectral method 总被引：4，自引：0，他引：4
Seismic wave propagation in transversely isotropic (TI) media is commonly described by a set of coupled partial differential equations, derived from the acoustic approximation. These equations produce pure P‐wave responses in elliptically anisotropic media but generate undesired shear‐wave components for more general TI anisotropy. Furthermore, these equations suffer from instabilities when the anisotropy parameter ε is less than δ. One solution to both problems is to use pure acoustic anisotropic wave equations, which can produce pure P‐waves without any shear‐wave contaminations in both elliptical and anelliptical TI media. In this paper, we propose a new pure acoustic transversely isotropic wave equation, which can be conveniently solved using the pseudospectral method. Like most other pure acoustic anisotropic wave equations, our equation involves complicated pseudo‐differential operators in space which are difficult to handle using the finite difference method. The advantage of our equation is that all of its model parameters are separable from the spatial differential and pseudo‐differential operators; therefore, the pseudospectral method can be directly applied. We use phase velocity analysis to show that our equation, expressed in a summation form, can be properly truncated to achieve the desired accuracy according to anisotropy strength. This flexibility allows us to save computational time by choosing the right number of summation terms for a given model. We use numerical examples to demonstrate that this new pure acoustic wave equation can produce highly accurate results, completely free from shear‐wave artefacts. This equation can be straightforwardly generalized to tilted TI media. 相似文献
17.
从含Thomsen各向异性参数的qP波相速度表示式出发,建立并求解三维VTI介质中的频散方程,得到三维VTI介质中的相移算子,进而将以相移算子为基础的最优分裂Fourier方法推广到三维VTI介质,发展了一个三维VTI介质的深度偏移方法.文中使用的各向异性介质的速度模型与现行的各向异性构造的速度估计方法一致,将各向同性、弱各向异性及强各向异性统一在一个模型中.文中提出的偏移算法对相移法引入了高阶校正项来补偿介质横向变化的影响,使该方法可应用于横向非均匀VTI介质的陡角度成像,文中给出的偏移脉冲响应很好地证明了这一点. 相似文献
18.
Václav Bucha 《Studia Geophysica et Geodaetica》2012,56(2):533-552
We use Kirchhoff prestack depth migration to calculate migrated sections in 3-D simple anisotropic homogeneous velocity models in order to demonstrate the impact of anisotropy on migrated images. The recorded wave field is generated in models composed of two homogeneous layers separated by one either non-inclined or inclined curved interface. The anisotropy in the upper layer is triclinic. We apply Kirchhoff prestack depth migration to velocity models with different types of anisotropy: a triclinic anisotropic medium, an isotropic medium, transversely isotropic media with a horizontal (HTI) and vertical (VTI) symmetry axis. We observe asymmetry in migration caused by triclinic anisotropy and we show the errors of the migrated interface caused by inaccurate velocity models used for migration. The study is limited to P-waves. 相似文献
19.
Tariq Alkhalifah 《Geophysical Prospecting》2015,63(5):1126-1141
Wavefield extrapolation operators for elliptically anisotropic media offer significant cost reduction compared with that for the transversely isotropic case, particularly when the axis of symmetry exhibits tilt (from the vertical). However, elliptical anisotropy does not provide accurate wavefield representation or imaging for transversely isotropic media. Therefore, we propose effective elliptically anisotropic models that correctly capture the kinematic behaviour of wavefields for transversely isotropic media. Specifically, we compute source‐dependent effective velocities for the elliptic medium using kinematic high‐frequency representation of the transversely isotropic wavefield. The effective model allows us to use cheaper elliptic wave extrapolation operators. Despite the fact that the effective models are obtained by matching kinematics using high‐frequency asymptotic, the resulting wavefield contains most of the critical wavefield components, including frequency dependency and caustics, if present, with reasonable accuracy. The methodology developed here offers a much better cost versus accuracy trade‐off for wavefield computations in transversely isotropic media, particularly for media of low to moderate complexity. In addition, the wavefield solution is free from shear‐wave artefacts as opposed to the conventional finite‐difference‐based transversely isotropic wave extrapolation scheme. We demonstrate these assertions through numerical tests on synthetic tilted transversely isotropic models. 相似文献
20.
转换波共转换点的叠加和道集选取都需要准确地计算转换点的位置.Tessmer和Behle、Taylor分别给出了水平单层介质中P SV转换波转换点坐标的解析解,由于其表达式的复杂性,在应用中几乎不被采用.在本文中,运用Snell定律重新建立了在水平反射界面上反射的P SV转换波的转换点坐标的四次方程,并严格地推导出与纵波速度、横波速度、炮检距和反射深度有关的转换点坐标的解析解,确定了惟一的解析表达式.将这一结果应用于P SV转换波的速度分析和叠加处理中.简化的公式有较好的应用价值. 相似文献