共查询到20条相似文献，搜索用时 31 毫秒
1.
This paper outlines a vibration prediction tool, ScopeRail, capable of predicting in-door noise and vibration, within structures in close proximity to high speed railway lines. The tool is designed to rapidly predict vibration levels over large track distances, while using historical soil information to increase accuracy. Model results are compared to an alternative, commonly used, scoping model and it is found that ScopeRail offers higher accuracy predictions. This increased accuracy can potentially reduce the cost of vibration environmental impact assessments for new high speed rail lines.To develop the tool, a three-dimensional finite element model is first outlined capable of simulating vibration generation and propagation from high speed rail lines. A vast array of model permutations are computed to assess the effect of each input parameter on absolute ground vibration levels. These relations are analysed using a machine learning approach, resulting in a model that can instantly predict ground vibration levels in the presence of different train speeds and soil profiles. Then a collection of empirical factors are coupled with the model to allow for the prediction of structural vibration and in-door noise in buildings located near high speed lines. Additional factors are also used to enable the prediction of vibrations in the presence of abatement measures (e.g. ballast mats and floating slab tracks) and additional excitation mechanisms (e.g. wheelflats and switches/crossings). 相似文献
2.
This paper outlines an experimental analysis of ground-borne vibration levels generated by high speed rail lines on various earthwork profiles (at-grade, embankment, cutting and overpass). It also serves to provide access to a dataset of experimental measurements, freely available for download by other researchers working in the area of railway vibration (e.g. for further investigation and/or the validation of vibration prediction models).First, the work outlines experimental investigations undertaken on the Belgian high speed rail network to investigate the vibration propagation characteristics of three different embankment conditions. The sites consist of a 5.5 m high embankment, an at-grade section and a 7.2 m deep cutting. The soil material properties of each site are determined using a ‘Multichannel Analysis of Surface Waves’ technique and verified using refraction analysis. It is shown that all sites have relatively similar material properties thus enabling a generalised comparison.Vibration levels are measured in three directions, up to 100 m from the track due to three different train types (Eurostar, TGV and Thalys) and then analysed statistically. It is found that contrary to commonly accepted theory, vertical vibrations are not always the most dominant, and that horizontal vibrations should also be considered, particularly at larger offsets. It is also found that the embankment earthworks profile produced the lowest vibration levels and the cutting produced the highest. Furthermore, a low (positive) correlation between train speed and vibration levels was found. A selection of the results can be downloaded from www.davidpconnolly.com. 相似文献
3.
Soft ground improvement using piles has increasingly been used as a rapid construction technique for railway and highway embankments over soft soil areas. While most studies conducted so far have addressed only issues of stability and settlement of pile-supported embankments under static loading, very limited attention has been paid to understanding their behaviors under transient loading of moving vehicles. In this study, vibration behaviors of this embankment system under high-speed train passage are investigated through three-dimensional finite element simulation. They include (1) characteristics of the surface wave field at high train speeds, (2) the dependence of vibration amplitude on the train speed and the phenomenon of critical speed, and (3) response at some typical locations in the system when the train moves at the critical speed. The study shows that there are breaks in the simulated wave fronts as transiting between different materials due to the difference in the Rayleigh wave speed among the materials relative to the train speed, and that the increase in train speed is accompanied by the increase in phase shift between the train load and the displacement pattern beneath the load. It is shown that the critical speed of the system is governed by the embankment, instead of the soft soil as commonly observed in previous studies in which the ground is not improved. Namely the vibration amplitude is maximally amplified when the train speed approaches the characteristic Rayleigh wave speed of the embankment material. In addition, the results also suggest that the sloping surfaces on the ballast and embankment along with the piles form a ‘trapping’ effect by which most of the train-induced waves, especially higher-frequency waves, incident to the sloping surfaces are trapped and dissipated within the pile-supported embankment system, and thus significantly reducing vibration amplitudes outside the embankment. 相似文献
4.
There is concern regarding the long-term vibration effects caused by metro trains on historic buildings. In this paper, the impact of metro train-induced vibrations on the Bell Tower in Xi’an above two spatially overlapping tunnels was studied.Metro Line 2 has been operational since 2011, and Line 6 is still under construction. To study and control the effect of micro vibrations on the Bell Tower, a metro train–track–tunnel–soil 3D dynamic FE model was developed. The vibration response generated by Line 2 was then predicted, and the influences of train speed on ground vibration were analysed. In addition, a detailed in situ measurement, which helped calibrate the numerical model and determine the dynamic behaviour of timber structures, was performed. Finally, the calibrated models and measured results were used to predict vibrations caused by road traffic and trains from two spatially overlapping metro lines. This was performed under different route schemes and train operation conditions.The results showed that installing steel spring floating slab tracks (FST) and decreasing train speeds had obvious effects on controlling the ground peak particle velocity (PPV). Simulated results from both the input impulse and output response generated by metro Line 2 matched well with actual measurements. If correct designs are employed, it is possible to resolve the vibration problem on historic buildings caused by metro trains. 相似文献
5.
A field measurement of ground vibration was performed on the Beijing−Shanghai high-speed railway in China. In this paper, the experimental results of vertical ground vibration accelerations induced by very high speed trains running over a non-ballasted track on embankment with speeds from 300 to 410 km/h are reported and analyzed in detail for the first time. Characteristics of ground vibration accelerations in both time and frequency domains are analyzed based on the test data. It is shown that the periodic exciting action of high-speed train bogies can be identified in time histories of vertical accelerations of the ground within the range of 50 m from the track centerline. The first dominant sensitive frequency of the ground vibration acceleration results from the wheelbase of the bogie, and the center distance of two neighboring cars plays an important role in the significant frequencies of the ground vibration acceleration. Variations of time–response peak value and frequency-weighted vertical acceleration level of ground vibration in relation with train speed as well as the distance from the track centerline are also investigated. Results show that the time-domain peak value of ground vibration acceleration exhibits an approximately linear upward tendency with the increase of train speed. With the increasing distance from the track centerline, the frequency-weighted vertical acceleration level of the ground vibration attenuates more slowly than the time-domain peak value of the ground vibration acceleration does. Severe impact of high-speed railway ground vibration on human body comfort on the ground occurs at the speed of 380–400 km/h. The results given in the paper are also valuable for validating the numerical prediction of train induced ground vibrations. 相似文献
6.
Analysis of train-induced vibrations and vibration reduction schemes above and below critical Rayleigh speeds by finite element method 总被引：6，自引：0，他引：6
This paper simulates soil vibration under the train speed below and over the soil Rayleigh speed using the three-dimensional finite element method. Two vibration isolation schemes were studied including the soil improvement around the railway and the concrete slab constructed between the rail and soil. Numerical results indicate that the vibration increases considerably and decays slowly when the train speed exceeds the soil Rayleigh speed. The wave direction and dominant frequencies are the simple functions of the train speed, the soil Rayleigh speed and the train compartment length. When the train speed exceeds the shear wave speed, the vibration magnitude is critical and not sensitive to the train speed. To reduce this vibration, the two isolation schemes investigated in this study are useful for the train speed over the soil Rayleigh speed, but they are not efficient for the train speed below the soil Rayleigh speed. 相似文献
7.
Recent advances in railway-induced ground vibrations showed that the track/soil interaction plays an important role in the low frequency range. This paper contributes to the numerical analysis of train/track/foundation dynamics by presenting the accuracy of a coupled lumped mass (CLM) model devoted to the railway foundations and to the track/soil coupling. Following a summary of the background and the advantages of the CLM model, the coupling strategy is quantified through two application cases. Firstly, the dynamic track deflection is calculated for different railway lines considering various degrees of complexities of foundations. Then, the foundation responses are compared depending on whether detailed coupling is introduced or not. The benefit of the proposed model is emphasized by presenting free-field ground vibration responses generated by a tram and a high-speed train, obtained by a revisited two-step prediction model developed by the authors. 相似文献
8.
论高速磁浮线路抗震设防标准与设计准则 总被引：1，自引：0，他引：1
高速磁浮交通系统是一种依靠电磁力实现车辆无接触运行的新型有轨交通系统，具有广阔的发展前景。本文充分考虑高速磁浮线路的特点和重要特性，借鉴其它行业的工程抗震设防标准，通过类比分析，提出和建议了适于磁浮线路的三级抗震设防标准；在此基础上，通过磁浮线路不同程度的地震损伤性能和可能的地震震害分析，提出和建议了磁浮线路结构考虑使用功能和地震损伤性能的三水准抗震设计准则，为我国长大干线磁浮线路抗震设防标准和设计准则的建立和细化并逐步形成设计指南和规程提供了基础。 相似文献
9.
发展高速铁路是解决城市间交通问题的有效途径,但其所产生的振动和噪声引起的环境问题,对铁路沿线居民及周围建筑等造成不利影响。在对高速铁路引起的振动问题进行的研究中,关于高速列车引起的地基土振动随深度变化的相对较少。因此,本文针对Ⅱ、Ⅲ和Ⅳ类场地条件下的路堤式和高架桥式高速铁路,对0—5m不同深度处地基土的振动加速度响应进行了现场测试,并以测试数据为基础,分析了不同场地条件下高速列车引起的地基土振动加速度响应随深度的变化规律。结果表明,不同场地条件下,高速列车引起的振动加速度响应随深度的变化规律具有显著差异;Ⅱ类和Ⅲ类场地条件下,高速列车引起的地基土振动加速度响应总体随深度的增加而逐渐减小,并呈先快后慢的衰减趋势;而Ⅳ类场地条件下,高速列车引起的地基土振动加速度响应随深度的增加呈现先减小后放大的趋势,在深3m处加速度达到最大值。高速列车运行引起的振动频带随深度的变化特征与场地相关。 相似文献
10.
基于环境振动的斜拉桥拉索基频识别 总被引：16，自引：1，他引：16
斜拉索是现代斜拉桥最重要的结构构件，索力在斜拉桥的施工控制和长期监测中起着重要作用。振动测试法是斜拉桥索力测定、监测和状态评估中应用最广泛的一种方法。振动法测索力的关键在于准确地识别出索的基频。本文使用自功率谱和倒频谱方法，基于MATLAB平台，开发出了斜拉桥拉索环境振动模态分析图形用户交互(GUI)工具箱，实现了斜拉索基频的快速自动识别。应用本文的方法，对福州青洲闽江主跨605m斜拉桥拉索的环境振动实测加速度数据进行了分析处理，斜拉索基频识别方便直观，结果可靠。 相似文献
11.
列车引起场地振动的建模需要能够表达地层的动力格林函数.本文兼顾饱和土的流固两相耦合性、场地土的分层性和波动的三维传播性,构建了半解析的场地动力格林函数.首先,基于Biot方程,在傅里叶变换域求解固体骨架和流体的位移和应力.然后采用传递矩阵方法建立地表位移和应力间的关系,得到格林函数矩阵.进而讨论矩阵的一些固有特征,提出改善竖向位移计算效率的措施.最后利用推导的格林函数计算了几个典型算例.数值结果与文献中其他方法得到的结果十分接近,与场地振动的现场观测试验基本符合.软土场地振动的计算结果高于饱和砂土场地,高速列车场地振动强度高于低速列车.当车速接近场地瑞利波速,模拟结果中显示出马赫锥.数值结果还显示,即使车速略低于瑞利波速,马赫锥也可能出现.本文推导的格林函数将有助于深入理解列车等移动激励作用下层状饱和土场地的振动特征. 相似文献
12.
Model testing in laboratory, as an effective alternative to field measurement, provides valuable data to understand railway׳s dynamic behaviors under train moving loads. This paper presents comprehensive experimental results on track vibration and soil response of a ballastless high-speed railway from a full-scale model testing with simulated train moving loads at various speeds. A portion of a realistic ballastless railway comprising slab track, roadbed, subgrade, and subsoil was constructed in a larger steel box. A computer-controlled sequential loading system was developed to generate equivalent vertical loadings at the track structure for simulating the dynamic excitations due to train׳s movements. Comparisons with the field measurements show that the proposed model testing can accurately reproduce dynamic behaviors of the track structure and underlying soils under train moving loads. The attenuation characteristics of dynamic soil stresses in a ballastless slab track is found to have distinct differences from that in a ballasted track. The model testing results provide better understanding of the influence of dynamic soil–structure interaction and train speed on the response of track structure and soils. 相似文献
13.
Brendon A. Bradley 《地震工程与结构动力学》2013,42(15):2235-2253
This paper compares the seismic demands obtained from an intensity‐based assessment, as conventionally considered in seismic design guidelines, with the seismic demand hazard. Intensity‐based assessments utilize the distribution of seismic demand from ground motions that have a specific value of some conditioning intensity measure, and the mean of this distribution is conventionally used in design verification. The seismic demand hazard provides the rate of exceedance of various seismic demand values and is obtained by integrating the distribution of seismic demand at multiple intensity levels with the seismic hazard curve. The seismic demand hazard is a more robust metric for quantifying seismic performance, because seismic demands from an intensity‐based assessment: (i) are not unique, with different values obtained using different conditioning intensity measures; and (ii) do not consider the possibility that demand values could be exceeded from different intensity ground motions. Empirical results, for a bridge‐foundation‐soil system, illustrate that the mean seismic demand from an intensity‐based assessment almost always underestimates the demand hazard value for the exceedance rate considered, on average by 17% and with a large variability. Furthermore, modification factors based on approximate theory are found to be unreliable. Adopting the maximum of the mean values from multiple intensity‐based assessments, with different conditional intensity measures, provides a less biased prediction of the seismic demand hazard value, but with still a large variability, and a proportional increase the required number of analyses. For an equivalent number of analyses, direct computation of the seismic demand hazard is a more logical choice and provides additional performance insight. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
14.
沪宁城际铁路高架桥段CRH动车组运行引起的地面振动现场测试与分析 总被引：1，自引：0，他引：1
对沪宁城际铁路CRH动车组运行引起的高架桥段地面振动竖向速度和加速度进行了现场测试,分析了地面振动特征及其传播的衰减规律。结果表明：CRH动车组运行引起的地面振动主频在70Hz以下,属于低频振动;地面振动峰值速度和加速度随着离高架桥距离的增大而减小,20m以内地面振动衰减幅度较大;地面振动峰值随列车时速的提高而增大,车厢数量对地面振动峰值和主频成分的影响不明显;CRH动车组运行引起的地面振动对一般性建筑物影响不大,列车时速为300km左右时,地面振动速度超过办公室等公共建筑的允许值,列车时速为200km左右时,地面振动速度超过居民住宅的允许值;与其他高速铁路的地面振动实测值相比,沪宁城际铁路CRH动车组运行引起的高架桥段地面振动强度相对较低。 相似文献
15.
列车已经成为交通运输的首选工具和主力,特别是高速列车对经济和社会的发展有着重要作用。由于高速列车和传统列车相比较最大的特点是速度高,因此所产生的环境振动越厉害,使得列车运输系统与人们的生产生活的矛盾越发激烈。因此,高速列车运行产生的环境振动问题成为国际研究热点和前沿课题。文中总结国内外研究现状和进展,重点从列车振动的理论研究、数值计算研究、现场测试研究与分析和不同场地列车振动效应研究四方面进行详细阐述,同时对列车运行产生振动的传播特点、场地效应、振动预测以及振动控制进行总结及展望。 相似文献
16.
Infrastructure owners and operators, or governmental agencies, need rapid screening tools to prioritize detailed risk assessment and retrofit resources allocation. This paper provides one such tool, for use by highway administrations, based on Bayesian belief network (BBN) and aimed at replacing so‐called generic or typological seismic fragility functions for reinforced concrete girder bridges. Resources for detailed assessments should be allocated to bridges with highest consequence of damage, for which site hazard, bridge fragility, and traffic data are needed. The proposed BBN based model is used to quantify seismic fragility of bridges based on data that can be obtained by visual inspection and engineering drawings. Results show that the predicted fragilities are of sufficient accuracy for establishing relative ranking and prioritizing. While the actual data and seismic hazard employed to train the network (establishing conditional probability tables) refer to the Italian bridge stock, the network structure and engineering judgment can easily be adopted for bridges in different geographical locations. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
17.
Field experiment of subgrade vibration induced by passing train in a seasonally frozen region of Daqing 总被引：1，自引：1，他引：0
Ling Xianzhang Zhang Feng Zhu Zhanyuan Ding Lin Hu Qingli . School of Civil Engineering Harbin Institute of Technology Harbin China . Institute of Subgrade Prevention Engineering China . Information & Engineering Technology College Sichuan Agricultural University Ya’an China . School of Architectural Engineering Heilongjiang University Harbin China Professor PhD Associate Professor 《地震工程与工程振动(英文版)》2009,8(1):149-157
The vibration characteristics and attenuation of the subgrade caused by passing trains in a seasonally frozen region of Daqing, China are investigated. Three field experiments were conducted during different times through the year, in normal, freezing and thawing periods, respectively, and the influence of the season, train speed and train type, is described in this paper. The results show that: (l) the vertical component is the greatest among the three components of the measured vibration near the rail track, and as the distance to the railway track increases, the dominant vibration depends on the season. (2) Compared with the vibration in the normal period, the vertical and longitudinal vibrations increase while the lateral vibration decreases in the freezing period. However, in the thawing period, the vertical and longitudinal vibrations decrease, and the lateral vibration increases. (3) As train speeds increase, the subgrade vibration increases. (4) The vibration induced by a freight train is greater than by a passenger train. These observations provide a better understanding of the vibration and dynamic stability of the subgrade and may be useful in developing criteria for railway and building construction in cold regions. 相似文献
18.
A study on seismic source process in short- term and imminent stage before destructive mining shock 总被引：2，自引：0，他引：2
ｎｔｒｏｄｕｃｔｉｏｎＳｔｕｄｙｏｎｓｅｉｓｍｉｃｓｏｕｒｃｅｐｒｏｃｅｓｉｎｓｈｏｒｔｔｅｒｍａｎｄｉｍｍｉｎｅｎｔｓｔａｇｅｂｅｆｏｒｅｅａｒｔｈｑｕａｋｅｉｓａｃｏｎｃｅｒｎｅｄｐｒｏｂｌｅｍｉｎｒｅｃｅｎｔｓｅｉｓｍｏｌｏｇｉｃａｌｆｉｅｌ... 相似文献
19.
考虑地铁环境振动噪声对未来城市地铁地震警报系统中地震信号识别的影响,以包含Ⅱ类和Ⅲ类2种场地土类型的哈尔滨市4个地铁站的上行线首部和尾部作为观测点,展开地铁环境振动噪声的测试、分析以及降噪处理研究。首先,对采集的列车振动数据进行统计分析;其次,基于滑动平均法,提出确定帕曾窗带宽b值的经验方法,并利用其对采集的地脉动数据进行平滑滤波处理;最后,采用本方法确定哈尔滨地铁地震P波预警的滤波频带,并与日本气象厅仪器地震烈度以及新干线地震预警系统的滤波频带进行对比。结果表明:①三轴向地铁列车振动信号中,竖向振动比水平向振动要大,切向振动比径向振动要大。②帕曾窗带宽b值为0.4 Hz时,平滑滤波处理后的频谱能较好地反映地脉动信号的频谱主频,且滤波后的地脉动信号的卓越频率和场地土类型有明显的对应关系,即水平向卓越频率和场地土类型的相关性较好,而竖向卓越频率的误差较大。③哈尔滨地铁地震P波预警的滤波频带为0.3~10 Hz时,能较好地滤除地震动信号中的地铁环境振动噪声,满足地震警报系统对地震记录信噪比的要求。 相似文献
20.
Diagnosis and prediction of vibration from railway trains 总被引：7，自引：0，他引：7
In the North West of France, more particularly in the region of the Somme Bay, where the ground is constituted mainly of peat, observation of the surface of the soil near railway tracks has revealed high levels of displacement. This paper, contains a prediction model and diagnosis of vibration near the track. A model of a railway track on layered ground subjected to a moving train has been built and the calculation method uses Fourier transform formalism for a semi-analytical solution in the wave number domain. It includes all elements of the track and allows a parametric analysis of its different elements and evaluation of vertical displacement according to the speed, weight and composition of each train. The diagnosis has been performed with in situ measurements and with the aim of the validation of the model. A parameter study of the ground undertaken by seismic measurements shows a critical speed close to 100 m/s while the studied trains are moving with sub-Rayleigh speeds. Measurements give us a lot of information about lateral and vertical acceleration on the soil's surface and parts of the track. For high speeds and freight trains, displacement reaches more than 10 mm. 相似文献