共查询到20条相似文献，搜索用时 31 毫秒
1.
Characteristics of Seismic Wave Propagation in the Binchuan Region of Yunnan Using a Dense Seismic Array and Large Volume Airgun Shots 总被引：1，自引：1，他引：0
The Binchuan region of Yunnan is a structurally complex region with mountains, basins, and active faults. In this situation,seismic wave propagation exhibits complex characteristics due to strong heterogeneity of underground media instead of following the great-circle path. In order to obtain a high-resolution shallow crustal structure, a dense seismic array was deployed during March 21 to May 30, 2017 in this area. To better understand the complexities of seismic wave propagation in this region, we perform array-based frequency-domain beamforming analysis and single-station based polarization analysis to investigate the characteristics of seismic wave propagation, using airgun-generated P-wave signals recorded by dense array stations in this experiment. The results from these two methods both reveal similar but complex characteristics of seismic wave propagation in the Binchuan basin. The azimuth anomalies off the great-circle path are quite large with values up to 30°, which is caused by strong structural heterogeneity in the very shallow crust. Our research provide a better understanding of the complex geologic structures in this area and provide guidance for detecting concealed faults and distribution of velocity anomalies. 相似文献
2.
Fault and fracture interpretation is a fundamental but essential tool for subsurface structure mapping and modelling from 3D seismic data. The existing methods for semi-automatic/automatic fault picking are primarily based on seismic discontinuity analysis that evaluates the lateral changes in seismic waveform and/or amplitude, which is limited by its low resolution on subtle faults and fractures without apparent vertical displacements in seismic images. This study presents an innovative workflow for computer-aided fault/fracture interpretation based on seismic geometry analysis. First, the seismic curvature and flexure attributes are estimated for highlighting both the major faults and the subtle fractures in a seismic volume. Then, fault probability is estimated from the curvature and flexure volumes for differentiation between the potential faults and non-faulting features in the geometric attributes. Finally, the seeded fault picking is implemented for interpreting the target faults and fractures guided by the knowledge of interpreters to avoid misinterpretation and artefacts in the presence of faulting complexities as well as coherent seismic noises. Applications to two 3D seismic volumes from the Netherlands North Sea and the offshore New Zealand demonstrate the added values of the proposed method in imaging and picking the subtle faults and fractures that are often overlooked in the conventional seismic discontinuity analysis and the following fault-interpretation procedures. 相似文献
3.
4.
竖向断层对场地地面运动的影响 总被引：1，自引：0，他引：1
本文采用二维显式有限元结合透射边界的数值方法,考虑均匀弹性半空间内存在着不同宽度及深度的断层,由下向上分别垂直和斜(30°)入射一个脉冲波,研究非发震断层地面运动的一些特点。通过计算断层内外地震地面运动传递函数的幅值谱,并与自由场反应对比,以说明竖向断层对地震波传播和附近地面运动的影响,在此基础上进一步对断层周边一般结构抗震设计是否要考虑断层影响提出了几点建议。 相似文献
5.
Electrical resistivity tomography (ERT) has been used to experimentally detect shallow buried faults in urban areas in the past a few years, with some progress and experience obtained. According to the results from Olympic Park, Beijing, Shandong Province, Gansu Province and Shanxi Province, we have generalized the method and procedure for inferring the discontinuity of electrical structures (DES) indicating a buried fault in urban areas from resistivity tomograms and its typical electrical features. In general, the layered feature of the electrical structure is first analyzed to preliminarily define whether or not a DES exists in the target area. Resistivity contours in resistivity tomograms are then analyzed from the deep to the shallow. If they extend upward from the deep to the shallow and shape into an integral dislocation, sharp flexure (convergence) or gradient zone, it is inferred that the DES exists, indicating a buried fault. Finally, horizontal tracing is be carried out to define the trend of the DES. The DES can be divided into three types-type AB, ABA and AC. In the present paper, the Zhangdian-Renhe fault system in Zibo city is used as an example to illustrate how to use the method to infer the location and spatial extension of a target fault. Geologic drilling holes are placed based on our research results, and the drilling logs testify that our results are correct. However, the method of this paper is not exclusive and inflexible. It is expected to provide reference and assistance for inferring the shallow buried faults in urban areas from resistivity tomograms in the future. 相似文献
6.
7.
IntroductionSichuan region is one of the extruded and connected parts between the Qinghai-Xizang (Tibet) Plateau and Yangtze block. And the joint region of Xianshuihe, Longmenshan and An(ninghe faults reflects the structure characteristics formed by the Qinghai-Xizang Plateau(s extruding to Yangtze block and the Sichuan basin evolutionary process as fore-land basin. The researches on seismic activity in Sichuan region were mainly around Xianshuihe, Longmenshan and An(ninghe faults separ… 相似文献
8.
Fang Shengming 《中国地震研究》2007,21(3):236-244
This paper introduces briefly the basic principles of various seismic prospecting techniques and working methods according to nationwide practices of seismic prospecting of active faults beneath big cities in recent years.Furthermore,it analyzes the application range of different seismic prospecting methods,main achievements and solved problems,and discusses the best combination of seismic exploration methods for detecting crustal structures and locating the faults used in the present stage,that is,to trace faults which are at depths of hundred of meters underground using shallow seismic investigation,to detect the faults which are above basement(at a depth of kilometers) using high resolution refraction sounding,and the deep crustal faults using combined seismic prospecting methods of reflection seismic sounding and wide-angle reflection/refraction sounding,and furthermore,to use the 3-D deep seismic sounding method to obtain 3-D velocity structures beneath urban areas.Thus,we can get information about fault attitude and distribution at different depths and a complete image of faults from their shallow part to deep part using the combined seismic exploration method.Some application examples are presented in the article. 相似文献
9.
太平洋板块俯冲对中国东北深浅震影响机理的数值模拟 总被引：1，自引：0，他引：1
本文采用与深度有关的不同分层结构模型, 并考虑太平洋板块俯冲角度差异等特征, 建立太平洋板块向中国东北地区俯冲的2D纵向静力学模型。 以太平洋板片俯冲速度为约束条件, 通过变化俯冲板块的俯冲角度, 数值模拟太平洋板块向中国东北的俯冲过程, 探讨太平洋板块俯冲作用对于我国东北深浅震的影响, 得到不同俯冲角度模型的深浅部应力场分布, 揭示区域构造应力场的总体特征和断裂带局部特性, 并讨论了活动断裂带以及邻近区域对东北地区深浅部构造应力场的响应。 结果表明, 太平洋板块俯冲角度的变化对于中国东北地区深浅震的地震活动格局具有重要影响, 断裂带构造环境是浅源地震孕育的基本条件。 相似文献
10.
结合汶川地震断裂带动态监测,利用快速响应探测系统,开展了断层带浅部结构人工地震探测.针对地震断裂带动态监测条件下的复杂波场和低信噪比的情况,在f-k波场分离的基础上,分别利用了折射波共中心点成像、面波速度反演、反射波叠加成像方法,进行了浅层断层和构造成像处理,并对处理结果进行了综合解释,给出了断裂带浅部断层分布和速度特征.为汶川地震龙门山断裂带东北端动态监测提供了基础结构信息,所发展的断裂带快速响应探测技术对于地震应急动态监测具有重要意义. 相似文献
11.
Study on coupling between deep and shallow structures of Xingtai area and some significant questions
IntroductionIn order to gain a clear idea of the deep tectonic environment of Xingtai earthquake area,three wide-angle deep seismic renectionlrefraction profiles have been conducted through the are4they are Yuanshi--Ji'nan profile, Renxian--Wuqing profile and Tat' an--LongyaM inzhou profi I e.The Yuanshi--Ji'nan profile passes through the epicenter of the Ms=7.2 main shock andTat' ~ongyaO--X inzhou profi ie passes through the ep icenter of the Ms=6. 8 earthquake. Duringthe "Eighth Five-… 相似文献
12.
LONG Si-sheng 《地震学报(英文版)》2000,13(5):491-498
Twenty-two earthquakes (M
L=2.2–3.7) in the joint region of Xianshuihe, Longmenshan and An’ninghe faults are studied in this paper. The source mechanism
solutions of these events are obtained using P-wave first motion method, and the characteristics of the source stress field
and rupture in the joint region are summarized preliminarily with some results of other researchers. Being strongly extruded
by the approximately horizontal regional stress with the direction from north-west to south-east and the effect of the complex
tectonics in the region, the source stress field has complex and variable characteristics. The earthquakes mainly show normal
or strike-slip faults in Yajiang, North-triangle and west of Chengdu-block areas, indicating that the vertical forces have
been playing an important role in the source stress fields, while the earthquakes mainly show reverse or strike-slip faults
in Baoxing-Tianquan area, with the horizontal components of the principal pressure stress axes identical to the south-west
direction to which the shallow mass is moving. We think that the manifold combinations of earthquake faults are the micro-mechanism
based upon which the large regional shallow crust mass has been moving continually. 相似文献
13.
Defining a model of 3D seismogenic sources for Seismic Hazard Assessment applications: The case of central Apennines (Italy) 总被引：6，自引：0，他引：6
Geology-based methods for Probabilistic Seismic Hazard Assessment (PSHA) have been developing in Italy. These methods require information on the geometric, kinematic and energetic parameters of the major seismogenic faults. In this paper, we define a model of 3D seismogenic sources in the central Apennines of Italy. Our approach is mainly structural-seismotectonic: we integrate surface geology data (trace of active faults, i.e. 2D features) with seismicity and subsurface geological–geophysical data (3D approach). A fundamental step is to fix constraints on the thickness of the seismogenic layer and deep geometry of faults: we use constraints from the depth distribution of aftershock zones and background seismicity; we also use information on the structural style of the extensional deformation at crustal scale (mainly from seismic reflection data), as well as on the strength and behaviour (brittle versus plastic) of the crust by rheological profiling. Geological observations allow us to define a segmentation model consisting of major fault structures separated by first-order (kilometric scale) structural-geometric complexities considered as likely barriers to the propagation of major earthquake ruptures. Once defined the 3D fault features and the segmentation model, the step onward is the computation of the maximum magnitude of the expected earthquake (M
max). We compare three different estimates of M
max: (1) from association of past earthquakes to faults; (2) from 3D fault geometry and (3) from geometrical estimate corrected by earthquake scaling laws. By integrating all the data, we define a model of seismogenic sources (seismogenic boxes), which can be directly used for regional-scale PSHA. Preliminary applications of PSHA indicate that the 3D approach may allow to hazard scenarios more realistic than those previously proposed. 相似文献
14.
We have pursued two-dimensional (2D) finite-difference (FD) modelling of seismic scattering from free-surface topography. Exact free-surface boundary conditions for the particle velocities have been derived for arbitrary 2D topographies. The boundary conditions are combined with a velocity–stress formulation of the full viscoelastic wave equations. A curved grid represents the physical medium and its upper boundary represents the free-surface topography. The wave equations are numerically discretized by an eighth-order FD method on a staggered grid in space, and a leap-frog technique and the Crank–Nicholson method in time.
In order to demonstrate the capabilities of the surface topography modelling technique, we simulate incident point sources with a sinusoidal topography in seismic media of increasing complexities. We present results using parameters typical of exploration surveys with topography and heterogeneous media. Topography on homogeneous media is shown to generate significant scattering. We show additional effects of layering in the medium, with and without randomization, using a von Kármán realization of apparent anisotropy. Synthetic snapshots and seismograms indicate that prominent surface topography can cause back-scattering, wave conversions and complex wave patterns which are usually discussed in terms of inter-crust heterogeneities. 相似文献
In order to demonstrate the capabilities of the surface topography modelling technique, we simulate incident point sources with a sinusoidal topography in seismic media of increasing complexities. We present results using parameters typical of exploration surveys with topography and heterogeneous media. Topography on homogeneous media is shown to generate significant scattering. We show additional effects of layering in the medium, with and without randomization, using a von Kármán realization of apparent anisotropy. Synthetic snapshots and seismograms indicate that prominent surface topography can cause back-scattering, wave conversions and complex wave patterns which are usually discussed in terms of inter-crust heterogeneities. 相似文献
15.
The thickness of the mechanical layer that hosts a group of faults can be estimated from the spacing of saturated faults (i.e. the constant spacing between faults when the fault system is fully developed and has attained its final fault density). We measured fault spacing for a group of saturated active normal faults on Miyako‐jima Island (southern Ryukyu Arc, Japan) and estimated the thickness of the faulted mechanical layer. The measured fault spacing is 1.30 ±0.14 km, and the thickness of the mechanical layer is < 3 km, which is the upper limit of the seismogenic zone. This faulted mechanical layer corresponds to a sedimentary layer in which earthquakes cannot occur. Results indicate that the shallow (< 3 km depth) normal faults on Miyako‐jima Island do not have the potential to cause medium‐size earthquakes as individual faults. The origin of the shallow normal faults might be related to the presence of a larger‐scale, deeper fault. The results indicate that fault spacing provides important information on the potential magnitude of earthquakes associated with active faults. 相似文献
16.
利用昆明市区的人工地震资料的Pg震相,通过三维有限差分方法对昆明地区浅部速度分布及构造进行反演,探讨了速度结构与隐伏断裂的关系以及主要活动断裂向深部的伸展情况. 其中,普渡河——西山断裂在各种深度速度分布图上都在低速异常区的西边界上,是昆明盆地西侧的边界断裂, 表现为以陡倾角向东倾斜, 且向深部延伸深度较大. 而普吉——韩家村断裂和黑龙潭——官渡断裂则控制盆地中部的低速异常区,向深部延伸深度相对较小,未穿过盆地基底界面. 相似文献
17.
Recent high-resolution deep seismic reflection profile across the Kunlun fault in northeastern Tibet shows clearly that the Moho is cut off by a complex thrust fault system. Moho offset is a general phenomenon, but little is known about the dynamic mechanism. In this study, contact models with Maxwell materials are used to simulate the mechanical process of Moho offset induced by the aseismic slip of deeply buried faults. Based on the seismic reflection data, we project a single fault model and a complex fault system model with two faults intersecting. The deformations of the Moho, the aseismic slips, and contact stresses on faults in different models are discussed in detail. Results show that the Moho offset might be produced by aseismic slip of deeply buried faults, and the magnitude is influenced by the friction coefficient of faults and the viscosity of the lower crust. The maximum slip occurs near the Moho on the single fault or at the crossing point of two intersecting faults system. Stress concentrates mainly on the Moho, the deep end of faults, or the crossing point. This study will throw light on understanding the mechanism of Moho offset and aseismic slip of deeply buried faults. The results of complex fault system with two faults intersecting are also useful to understand the shallow intersecting faults that may cause earthquakes. 相似文献
18.
19.
20.
THE CRUSTAL SHALLOW STRUCTURES AND FAULT ACTIVITY DETECTION IN XINYI SECTION OF TAN-LU FAULT ZONE 
下载免费PDF全文
下载免费PDF全文 GU Qin-ping XU Han-gang YAN Yun-xiang ZHAO Qi-guang LI Li-mei MENG Ke YANG Hao WANG Jin-yan JIANG Xin MA Dong-wei 《地震地质》1979,42(4):825-843
The Tan-Lu fault zone is the largest active tectonic zone in eastern China, with a complex history of formation and evolution, and it has a very important control effect on the regional structure, magmatic activity, the formation and distribution of mineral resources and modern seismic activity in eastern China. Xinyi City has a very important position as a segmental node in the Shandong and Suwan sections of the Tan-Lu fault zone. Predecessors have conducted research on the spatial distribution, occurrence and activity characteristics of the shallow crustal faults in the Suqian section of the Tan-Lu belt, and have obtained some new scientific understandings and results. However, due to different research objectives or limitations of research methods, previous researches have either focused on the deep crustal structure, or targeted on the Suqian section or other regions. However, the structural style and deep-shallow structural association characteristics of Xinyi section of Tan-Lu belt have not been well illustrated, nor its activity and spatial distribution have been systematically studied. In order to investigate the shallow crustal structure features, the fault activities, the spatial distribution and the relationship between deep and shallow structures of the Xinyi section of the Tan-Lu Fault, we used a method combining mid-deep/shallow seismic reflection exploration and first-break wave imaging. Firstly, a mid-deep seismic reflection profile with a length of 33km and a coverage number greater than 30 was completed in the south of Xinyi City. At the same time, using the first arrival wave on the common shot record, the tomographic study of the shallow crust structure was carried out. Secondly, three shallow seismic reflection profiles and one refraction tomography profile with high resolution across faults were presented. The results show that the Xinyi section of Tan-Lu fault zone is a fault zone composed of five concealed main faults, with a structural pattern of “two grabens sandwiched by a barrier”. The five main faults reveal more clearly the structural style of “one base between two cuts” of the Tan-Lu fault zone. From west to east, the distribution is as follows: on the west side, there are two high-angle faults, F4 and F3, with a slot-shaped fault block falling in the middle, forming the western graben. In the middle, F3 and F2, two normal faults with opposite dip directions, are bounded and the middle discontinuity disk rises relatively to form a barrier. On the east side, F2 and F1, two conjugate high-angle faults, constitute the eastern graben. The mid-deep and shallow seismic reflection profiles indicate that the main faults of the Xinyi section of Tan-Lu fault zone have a consistent upper-lower relationship and obvious Quaternary activities, which play a significant role in controlling the characteristics of graben-barrier structure and thickness of Cenozoic strata. The shape of the reflective interface of the stratum and the characteristics of the shallow part of the fault revealed by shallow seismic reflection profiles are clear. The Mohe-Lingcheng Fault, Xinyi-Xindian Fault, Malingshan-Chonggangshan Fault and Shanzuokou-Sihong Fault not only broke the top surface of the bedrock, but also are hidden active faults since Quaternary, especially the Malingshan-Chonggangshan Fault which shows strong activity characteristics of Holocene. The results of this paper provide a seismological basis for an in-depth understanding of the deep dynamics process of Xinyi City and its surrounding areas, and for studying the deep-shallow tectonic association and its activity in the the Xinyi section of the Tan-Lu Fault. 相似文献