共查询到20条相似文献，搜索用时 46 毫秒
1.
用吹扫-捕集气相色谱法对北黄海常见的4种挥发性卤代烃(VHC)的研究表明,秋季北黄海表层海水中CHCl3,C2HCl3,CHBr2Cl和CHBr3的浓度和平均值分别为9.9~63.4(14.1±8.1),7.1~29.4(15.4±6.2),0.1~30.3(8.8±10.0)和4.2~56.4(21.6±12.2)pmol/dm3。这4种VHC在水平分布上呈现一定的空间变化,其浓度可能是陆地径流、人为活动和生物产生的影响程度不同造成的。VHC在垂直分布上受到地理位置和水文条件的不同影响,在不同站位有较大差异。周日变化研究表明,VHC具有一定的周日变化特征,受光照和潮汐等因素的共同影响最大值均出现在13:00—16:00。采用Liss和Slater双层模型理论对北黄海表层海水和大气之间CHCl3,C2HCl3和CHBr3的海-气通量进行估算,得到这3种物质在北黄海的海-气通量平均值和范围分别为14.8(0.2~104.4),23.2(1.8~93.0)和15.6(0.7~55.1)nmol/(m2.d)。结果表明,在秋季该研究海域是大气CHCl3,C2HCl3和CHBr3的源。 相似文献
2.
汞同位素技术是汞的生物地球化学循环和污染防治研究的重要手段,在汞的源解析和过程示踪等方面具有广泛应用。由于自然环境中汞含量极低,所以环境样品需先经过一系列严苛的预处理才能开展汞同位素分析。目前,用于同位素分析的固态样品前处理方法主要有湿法消解和燃烧捕集法,液态样品的前处理方法以色谱分离、共沉淀和吹扫捕集为主,气态样品则收集至不同的固态吸附剂后,通过燃烧捕集法富集样品中的汞。相比湿法消解,燃烧捕集法具有富集倍数高、干扰元素少、适用范围广、操作简便等优点,广泛应用于土壤、岩石和大气等样品的前处理中。海水样品的前处理以共沉淀的效率最高,而吹扫捕集能富集海水中不同形态的汞。为拓展汞同位素技术在汞的生物地球化学循环研究中的应用,亟需建立更加快捷、高效的前处理技术。 相似文献
3.
以海水中7种苯系物为研究目标,利用吹扫捕集-气相色谱质谱分析方法准确测定海水中苯系物的含量,研究不同环境条件下海水中苯系物的挥发、降解等衰减过程,探讨海洋微生物对苯系物降解贡献率。结果表明,7种苯系物性质相似,在不同保存条件下,海水中苯系物各组分浓度随时间的变化规律基本一致。海水中苯系物的衰减过程受温度影响明显,室温23°C条件下比低温4°C条件下海水中苯系物衰减更快,低温4°C时苯系物衰减完毕时间约125h,而室温23°C时则为24h。天然海水中间二甲苯、邻二甲苯相对更容易挥发或降解,而苯乙烯、苯则相对滞后。敞口保存下天然海水中苯系物浓度的降低更多是挥发造成的,微生物降解贡献率相对较小;密封保存下以微生物厌氧降解为主,其对苯系物降解贡献率明显高于敞口保存,累计可达83%,室温23°C下微生物降解苯系物时间更短,但低温4°C下微生物降解苯系物更完全。在适宜的温度和密封条件下天然海水中微生物降解对于海水中苯系物的去除将起到更加重要的作用。 相似文献
4.
海洋中产生的挥发性卤代烃(Volatile Halocarbons，VHCs)是氯、溴和碘进入大气的重要载体。海洋藻类能够产生损耗大气中臭氧的VHCs，尤其是海洋微藻已被证明是大气中一些VHCs的主要贡献者。环境因素对海洋微藻产生VHCs的影响研究较少，本文主要研究了光照和硝酸盐浓度对微藻释放VHCs的影响。将海洋微藻东海原甲藻(Prorocentrum donghaiense)和三角褐指藻(Phaeodactylum tricornutum)置于密封的玻璃容器中，并在不同光照条件(20 μmol/(m2·s)、70 μmol/(m2·s)和140 μmol/(m2·s))及不同硝酸盐浓度(1 mg/L、5 mg/L、10 mg/L和50 mg/L)下进行无菌单种培养，分析碘甲烷(CH3I)、二溴甲烷(CH2Br2)、一氯二溴甲烷(CHBr2Cl)和三氯乙烯(C2HCl3)4种VHCs的生产。采用吹扫?捕集气相色谱技术对其中的VHCs进行提取和分析。结果表明，光照强度和硝酸盐浓度会影响两种微藻对VHCs的释放，但是对不同VHCs的影响效果不同，其中CH3I的释放受光照强度和硝酸盐浓度变化的影响比较显著。一定范围内，光照强度越大，两种微藻对CH3I的释放量越大。适当的硝酸盐浓度(> 5 mg/L)在一定程度上促进了两种微藻对CH3I的释放。 相似文献
5.
二甲基硫（DMS）是海洋排放的占优势地位的生源硫气体,其在大气中的氧化产物能够影响到环境酸化和世界的气候变化.因此, 测定海水中的DMS对于准确地评价其在全球硫循环所起的重要作用具有重要意义.本文中作者研究了海水中DMS的痕量分析技术.海水中的DMS首先采用气提-冷阱捕集技术进行预浓缩, 然后用带有火焰光度检测器的气相色谱（GC-FPD）进行分析.该方法的精确度在5%以内, 平均回收率为85.6% （82.8%-90.5%）, 最小检出限为0.15 ng S.β-二甲基巯基丙酸内盐（DMSP）的分析是通过将其在碱性溶液中分解成DMS来进行.作者采用此方法实测了黄海中DMS和DMSP的含量, 获得了理想的结果. 相似文献
6.
海洋中的CO2观测与研究 总被引：1，自引：0，他引：1
在1985年～1997年之间"陆架边沿海海洋通量研究"和"中美海气联合调查"(TOGA)海洋观测调查项目中,利用库仑仪系统和高精度测量海水二氧化碳分压气相色谱系统测量了表层和深层海水总溶解二氧化碳(TCO2)、海水和大气CO2分压(PCO2)样品,测量精度为±1umol/kg和±1utam.根据表层和深层CO2数据,讨论了影响CO2变化的主要因素,通过研究计算获得了CO2和温度(T)、盐度(S)、总碱度(ALK)相关回归方程.CO2分布变化与流、水团、黑潮变化密切相关.本文根据在中国东海四个航次测量的海水和大气的PCO2,描述了调查海域CO2的源与汇以及通量的分布. 相似文献
7.
运用实验模拟的手段,对铀(U)、钍(Th)在碳酸钙-海水界面的附着行为进行了初步研究,通过测定相关的分异系数(D)定量评估了文石和方解石两种碳酸钙矿物对U和Th的捕集作用。实验结果显示,不仅U和Th之间存在显著差异,而且两种碳酸钙矿物之间也存在明显不同。U介于碳酸钙和海水之间的分异系数(DU)分别在1.5~3.5(文石)和0.04~0.19(方解石)区间内变化,分异行为非常微弱但其分异系数随着碳酸钙沉淀速率的增加而逐渐上升。这表明U元素主要是以共沉淀的方式进入到文石或方解石沉淀中,但由于其在海水溶液中主要以2 22 3UO(CO)nn的形式存在,因而只能以占据晶格缺陷的方式进入碳酸钙。与之相反的是,文石和方解石都对Th表现出极强的捕集能力,所测定的分异系数(DTh)分别在240~6 330(文石)和430~6 160(方解石)范围内变化,但DTh与碳酸钙沉淀速率之间无明显关联。Th在碳酸钙表面的附着行为可界定为单纯的吸附作用,这一行为应与Th主要以Th(OH)4的形式赋存于溶液中有关。 相似文献
8.
CO2是引起全球气候变暖的最重要温室气体。大气中过量CO2被海水吸收后将改变海水中碳酸盐体系的组成,造成海水酸化,危害海洋生态环境。本文采用局部近似回归法对2013年12月—2014年11月期间西沙海洋大气CO2浓度连续监测数据进行筛分,得到西沙大气CO2区域本底浓度。结果表明,西沙大气CO2区域浓度具有明显的日变化和季节变化特征。4个季节西沙大气CO2区域本底浓度日变化均表现为白天低、夜晚高,最高值405.39×10-6(体积比),最低值399.12×10-6(体积比)。西沙大气CO2区域本底浓度季节变化特征表现为春季和冬季高,夏季和秋季低。CO2月平均浓度最高值出现在2013年12月,为406.22×10-6(体积比),最低值出现在2014年9月,为398.68×10-6(体积比)。西沙大气CO2区域本底浓度日变化主要受本区域日照和温度控制。季节变化主要控制因素是南海季风和大气环流,南海尤其是北部海域初级生产力变化和海洋对大气CO2的源/汇调节作用。 相似文献
9.
运用吹扫-捕集气相色谱法测定了2017年夏季长江口及其邻近海域海水中4种常见的挥发性卤代烃（VHCs，包括一氟三氯甲烷（CFC-11）、碘甲烷（CH3I）、三氯甲烷（CH3CCl3）和四氯乙烯（C2Cl4））以及大气中CFC-11、CH3I和C2Cl4的浓度。结果表明，表层海水中4种VHCs浓度的水平分布受长江径流输入影响强烈，整体上呈现近岸高、远海低的趋势。垂直方向上4种VHCs浓度最高值出现在10 m水层，长江口内断面的浓度整体高于口外断面的浓度。海水中VHCs的浓度分布受水文环境、生物释放和人为因素等的共同影响。相关性分析表明CH3I与Chl a浓度不存在明显的相关性，而CFC-11与CH3I、C2Cl4浓度存在显著相关性（P<0.01），表明调查海域人为源对CH3I和C2Cl4的影响大于天然源。大气中CFC-11、CH3I和C2Cl4的浓度分布整体上呈现近岸高、远海低的趋势。CFC-11的浓度低于全球平均值，表明我国CFC-11的排放得到了有效控制。后向轨迹分析表明来自近岸的陆源污染物的扩散和输送是调查海域大气中3种VHCs的重要来源。CFC-11、CH3I和C2Cl4的海-气通量平均值分别为24.99 nmol/（m2·d）、7.80 nmol/（m2·d）、1.55 nmol/（m2·d），表明夏季长江口及其邻近海域是大气中这3种VHCs的源。 相似文献
10.
本文通过巴士海峡和菲律宾海沟两侧表层海水~(14)C 含量水平的测量,详细地介绍了海水~(14)C 含量测量的取样、制样流程、测量方法,并提供所获结果:测区高纬度海域表层海水~(14)C 含量水平略高于现代碳标准;低纬度海域表海水~(14)C 含量低于现代碳标准,是深层海水上涌与表层水混合的结果。从而说明海水的~(14)C 含量测量不仅有年代学意义,而且是海洋监测及海洋水文学研究的重要核素之一。文章还指出进一步开展菲律宾海沟中-南段海域表层、深层海水~(14)C 浓度变化梯度研究的必要性。 相似文献
11.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
12.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
13.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
14.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
15.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
16.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
17.
The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics. 相似文献
18.
19.
20.
《海洋学报(英文版)》2014,(11):161-F0003
<正>Acta Oceanologica Sinica(AOS)is a comprehensive academic journal edited by the Editorial Committee of Acta Oceanologica Sinica and is designed to provide a forum for important research papers of the marine scientific community which reflect the information on a worldwide basis.The journal publishes scholarly papers on marine science and technology,including physics,chemistry,biology, 相似文献