首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Seismic bearing capacity of shallow strip footings   总被引：6，自引：0，他引：6  
Seismic bearing capacity of shallow strip footings in soil has been obtained in the form of pseudo-static seismic bearing capacity factors Ncd, Nqd and Nd, denoting the cohesion, surcharge and unit weight components, respectively, by an extensive numerical iteration technique. Limit equilibrium method of analysis with composite failure surface is assumed. The validity of the principle of superposition is examined. Effects of both the horizontal and vertical seismic acceleration coefficients have been found to always reduce the ultimate bearing capacity significantly. Results obtained by the present method of analysis are compared with the available results and are found to be the least in the seismic case.  相似文献   

2.
Zusammenfassung 1Tc-Strontiohilgardit (Ca, Sr)2 [B5O8(OH)2,Cl] mit Ca : Sr etwa 1 : 1 ist ein neues Mineral der Hilgarditgruppe. Fundpunkt: Reyersbausen (9° 59,7 E, 51° 36,6 N), Grube Königshall-Hindenburg, Flöz Staßfurt in sylvinitischer Ausbildung.Konstanten : triklin-pedial,a 0=6,38 Å,b 0=6,480 Å,c 0=6,608 Å, =75,4°,=61,2°, =60,5°; tafelige-gestreckte Links- und Re chtskristalle, farblos, wasserunlöslich, piezoelektrisch. Härte 5–7, Dichte 2,99 g cm–3;n =1,638,n =1,639,n =1,670; 2V =19°.Neue Daten für die Hilgarditgruppe : 2 M (Cc)-Calciumhilgardit (=Hilgardit) =4 Ca2[B5O3(OH)2Cl], Raumgruppe Cc.3Tc-Calciumhilgardit (=Parahilgardit) = 3 Ca2[B5O3(OH)2Cl]; trinklin-pedial, 0=6,31 Å,b =6,484 Å,c 0=17,50 Å; =84,0°,=79,6°, =60,9°.Die Polymorphiebeziehungen sind geometrisch deutbar durch eine spezielle Art der Polytropie (Stapelung von Links- und Rechtskristallen im Elementarbereich).  相似文献   

3.
Mean and turbulent velocity measurements of supersonic mixing layers   总被引：1，自引：0，他引：1  
The behavior of supersonic mixing layers under three conditions has been examined by schlieren photography and laser Doppler velocimetry. In the schlieren photographs, some largescale, repetitive patterns were observed within the mixing layer; however, these structures do not appear to dominate the mixing layer character under the present flow conditions. It was found that higher levels of secondary freestream turbulence did not increase the peak turbulence intensity observed within the mixing layer, but slightly increased the growth rate. Higher levels of freestream turbulence also reduced the axial distance required for development of the mean velocity. At higher convective Mach numbers, the mixing layer growth rate was found to be smaller than that of an incompressible mixing layer at the same velocity and freestream density ratio. The increase in convective Mach number also caused a decrease in the turbulence intensity ( u /U).List of Symbols a speed of sound - b total mixing layer thickness betweenU 1 – 0.1U andU 2 + 0.1U - f normalized third moment ofu-velocity,f u 3/(U)3 - g normalized triple product ofu 2 v,g u 2 v/(U)3 - h normalized triple product ofu v 2, h uv' 2/(U)3 - l u axial distance for similarity in the mean velocity - l u axial distance for similarity in the turbulence intensity - M Mach number - M c convective Mach number (for 1=2),M c (U 1–U 2)/(a 1+a 2) - P static pressure - r freestream velocity ratio,rU 2/U 1 - Re unit Reynolds number,Re U/ - s freestream density ratio,s 2/ 1 - T t total temperature - u instantaneous streamwise velocity - u deviation ofu-velocity,u u–U - U local mean streamwise velocity - U 1 primary freestream velocity - U 2 secondary freestream velocity - U average of freestream velocities, ¯U (U 1 +U 2)/2 - U freestream velocity difference,U U 1 –U 2 - v instantaneous transverse velocity - v deviation ofv-velocity,v v – V - V local mean transverse velocity - x streamwise coordinate - y transverse coordinate - y 0 transverse location of the mixing layer centerline - ensemble average - ratio of specific heats - boundary layer thickness (y-location at 99.5% of free-stream velocity) - similarity coordinate, (y –y 0)/b - compressible boundary layer momentum thickness - viscosity - density - standard deviation - dimensionless velocity, (U –U 2)/U - 1 primary stream - 2 secondary stream A version of this paper was presented at the 11th Symposium on Turbulence, October 17–19, 1988, University of Missouri-Rolla  相似文献   

4.
The axial base and skin capacities of piles bored in cohesion less soils are often estimated using empirical, semi-empirical and theoretical methods. The aim of this paper is to assess the applicability and evaluate the accuracy of different predictions methods available in the literature, via comparison with data from 43 field pile load tests conducted on shafts drilled in the region of the United Arab Emirates. Janbu's theoretical method (1989) with the parameter (=75°) and Vesics theoretical method (1975) yielded accurate predictions for the base resistances. Burlands approach (1973) overpredicts the skin capacities with an average predicted-to-estimated ratio (q p /q e) of three times greater than the unity while using values of the coefficient of earth pressure (k=05k o ) and the angle of soil-pile friction (=23).  相似文献   

5.
Thermal treatments of anorthite carried out at up to 1,547° C show that the unit cell parameter changes as a function of the treatment temperature. The best fit curve found by non-linear least squares analysis is: =91.419-(0.327·10-6)T 2+(0.199·10-12)T 4-(0.391·10)T 6. The results obtained support significant Al,Si disorder (Al0.10, where Al=t 1(0)-1/3 [t 1(m)+t 2(0)+t 2(m)], Ribbe 1975), in anorthite equilibrated near the melting point and confirm a high temperature series differentiated from the low temperature series for calcic plagioclases in the An85–An100 range also. In the plot vs. An-content the high and low temperature curves intersect at An85 composition and progressively diverge in the An85–An100 range. The trends of the high and low temperature curves in this range are interpretable on the basis of the degree of Al, Si order in the average structures of calcic plagioclases.  相似文献   

6.
Summary The reflectance of oriented crystal faces parallel (100) and (001) of ilvaite was measured in air and in oil at different wavelengths with linearly polarized light. Refractive indices and absorption constants were calculated from the reflectance values. In contrast ton andn ,n has a strong dispersion. For the calculation ofn the absorption constant can be neglected. According to the unit cell ofBelov andMokeeva (1954) with the lattice constantsa 0=8.82,b 0=13.07,c 0=5.86 Å,n vibrates parallel to [001]n parallel to [100] andn parallel to [010]. Ilvaite is optically negative.
Auflichtuntersuchungen zur Optik des Ilvaits
Zusammenfassung Auf orientiert geschliffenen (100) und (001) Kristallplatten von Ilvait wurde das Reflexionsvermögen in Luft und in Öl mit linear polarisiertem Licht bei verschiedenen Wellenlängen gemessen. Aus den Reflexionswerten wurden die Brechungsindices und Absorptionskonstanten berechnet.n zeigt im Gegensatz zun undn eine auffallend starke Dispersion. Für die Berechnung vonn kann die Absorptionskonstante vernachlässigt werden. Nach der Aufstellung der Elementarzelle vonBelov undMokeeva (1954) mit den Gitterkonstantena 0=8,82,b 0=13,07,c 0=5,86 Å schwingtn parallel [001],n parallel [100] undn parallel [010]. Der Ilvait ist optisch negativ.

With 2 Figures  相似文献   

7.
Summary As suggested bySmith (1968) and supported by most structural data published since, in alkali feldspar the ** plot can be used for estimating (**), i. e. the difference in Al confent between 0 andm subsites. The present study investigates the topologically identical plot on the basis of the configuration of the alkali feldspar tetrahedral framework. Changes in Al content ofT-sites are functionally related to changes in cosines of and . While the total Al causing changes in cos is directly equal to the difference in Al content between 0 andm subsites, the total Al causing changes in cos is expressed by a complicated function which is equal with a very good approximation to three fourths of the difference in Al content betweenm and 0 subsites. This relation of quasiproportionality. like the feasible substitution in alkali feldspar of the diagram cos vs. cos by the plot, represents two simplifying assumptions which permit the difference in Al content to be calculated, as previously predicted.
Strukturelle Deutung für (**) aus dem */* der Alkalifeldspäte
Zusammenfassung Nach einem Vorschlag vonSmith (1968) und in Übereinstimmung mit den meisten seither publizierten Strukturdaten kann man in Alkalifeldspäten das */* zur Abschätzung von (**), also des Unterschiedes im Al-Gehalt auf der 0- undm-Position benützen. Die vorliegende Arbeit untersucht das topologisch idente /-Diagramm auf der Basis der Gestalt des Tetraederverbandes der Alkalifeldspäte. änderungen im Al-Gehalt derT-Position sind mit Änderungen im Kosinus von und korreliert. Während der die cos -änderungen verursachende Al-Gesamtgehalt unmittelbar dem Unterschied im Al-Gehalt derO-undm-Position entspricht, ist der die cos -Änderungen verursachende Al-Gesamtgehalt durch eine komplizierte Funktion ausgedrückt, die aber mit sehr guter Näherung drei Vierteln der Differenz im Al-Gehalt auf denm-und 0-Poisitionen entspricht. Diese quasi-Proportionalität und die Ersetzbarkeit des cos /cos -Diagrammes durch das /-Diagramm bei den Alkalifeldspäten stellen zwei Vereinfachungen bei der Berechnung des Al-Gehaltes dar.
  相似文献   

8.
Single crystals of boehmite, up to 0.1 mm in size, were found in open cavities inside a corundum crystal from the Ratnapura area gem gravels in Ceylon. The unit cell parameters are (X-ray powder pattern): a 0=3.695 Å b 0=12.212 Å, c 0=2.867 Å. The crystallographic orientation is based on X-ray single-crystal precession photographs. The crystals show the faces (it010), (001), (101), and (221). Systematic extinctions agree with the space group Amam. Optical orientation: a, b, c. Refractive indices are given. The mineral is optically positive with a large optic axial angle.  相似文献   

9.
In-situ synchrotron X-ray diffraction experiments were conducted using the SPEED-1500 multi-anvil press of SPring-8 on stishovite SiO2 and pressure-volume-temperature data were collected at up to 22.5 GPa and 1,073 K, which corresponds to the pressure conditions of the base of the mantle transition zone. The analysis of room-temperature data yielded V0=46.56(1) Å3, KT 0=296(5) GPa and K T =4.2(4), and these properties were consistent with the subsequent thermal equation of state (EOS) analyses. A fit of the present data to high-temperature Birch-Murnaghan EOS yielded (KT /T) P =–0.046(5) GPa K–1 and = a + bT with values of a =1.26(11)×10–5 K–1 and b =1.29(17)×10–8 K–2. A fit to the thermal pressure EOS gives 0=1.62(9)×10–5 K–1, ( K T / T) V =–0.027(4) GPa K–1 and (2P /T 2) V =27(5)×10–7 GPa K–2. The lattice dynamical approach by Mie-Grüneisen-Debye EOS yielded 0=1.33(6), q =6.1(8) and 0=1160(120) K. The strong volume dependence of the thermal pressure of stishovite was revealed by the analysis of present data, which was not detectable by the previous high-temperature data at lower pressures, and this yields ( K T / T) V 0 and q 1. The analyses for the fictive volume for a and c axes show that relative stiffness of c axis to a axis is similar both on compression and thermal expansion. Present EOS enables the accurate estimate of density of SiO2 in the deep mantle conditions.  相似文献   

10.
Because multidimensional ARMA processes have great potential for the simulation of geological parameters such as aquifer permeability, it was important to resolve which of two proposed alternative methods should be used for determining the two-dimensional weighting parameter, , for a unilateral ARMA (1, 0) process on a square net. Practical simulations demonstrates that the correct formulation is: =10/(1+ 10 2 where r,s is the correlation between lattice points at lagsr and s. When the simulations are performed with correlations of 0.8 or more a residual bias was detected which was found to be caused by a difference in the variance between the one- and two-dimensional models. This can be rectified by modifying the two- dimensional model as follows: zij=(zi–1, j + zi, j–1) + aij where 2=1/(1 + 10 2 ).  相似文献   

11.
In this experimental work I studied the correlation of the specific gravity and index of refraction at 19 moldavites from a finding place in Nchov. This place is in the south of Bohemia, in a district of eské Budjovice (Budweis). The reason for this work was the extraordinary declaration of the correlation of the specific gravity and index of refraction at one moldavite from Nchov that is: d=2,395 and n D =1,5033.These declarations were settled by Nováek. The results of these measurings have shown that the linear correlation of the specific gravity and index of refraction of the moldavites from other finding places are characteristic also for these ones. The definition of this correlation at 19 pieces of moldavites from Nchov shows also this linear character in the measuring of values d=2,355–2,395 and n D =1,4870–1,4950.In this work there were settled also some other dates of unity (so-called in couple-moldavites). But we must not oversee certain vaccilations of the declaration at the moldavites from Nchov, as at those from other finding places. The secularity of these declarations about the moldavites of Nchov lies also therein, that the avarage value of the correlation of specific gravity and index of refraction of this finding place is higher than those of other places.

Herrn Dr. Walter Weiskirchner, Dozent an der Universität Tübingen, danke ich herzlich für die freundliche Durchsicht der Arbeit.  相似文献   

12.
Partition of Fe2+ and Mg between coexisting (Mg, Fe)2SiO4 spinel and (Mg, Fe)SiO3 pyroxene was investigated at pressures 80 and 90 kbar and at temperatures 840 and 1050° C, using tetrahedral-anvil type of high pressure apparatus. Olivine-spinel solid solution equilibria in the system Mg2SiO4-Fe2SiO4 were discussed in the light of the partition reaction. Partition of Fe2+ and Mg in both olivine-spinel and pyroxene-spinel systems can not be regarded as that between ideal solid solutions. By applying the simple solution model for the partition of Fe2+ and Mg, sign of the heat of mixing was estimated to be positive for all olivine, spinel and pyroxene. Relative concentration of Fe2+ in spinel in the pyroxene-spinel system is likely to cause some change in the chemical composition of modified spinel () or spinel () in the transition zone of the mantle. A considerable change is also expected in the transition pressure of to ( + ) and ( + ) to .Presented at the symposium Recent Advances in the Studies of Rocks and Minerals at High Pressures and Temperatures held in Montreal, 1972. Jointly sponsored by the International Mineralogical Association and the Commission on Experimental Petrology.  相似文献   

13.
Summary Barylite has been identified for the first time in Greenland in several specimens from the nepheline syenite pegmatite pockets at Narssârssuk. The crystals are orthorhombic, showing the forms {100}, {210} and {201}, and form thin plates parallel to {100}. Electron microprobe analysis and emission spectrography show a composition close to the ideal formula. The refined unit cell paramters are:a=9.835(2) Å,b=11.654(3) Å andc=4.673(1) Å. The barylite is biaxial negative, 2V =66o±2o,n =1.694,n = 1.697 andn calc.=1.698.
Das erste grönländische Vorkommen des seltenen Minerales Barylith
Zusammenfassung Der seltene Barylith wurde zum ersten Mal in Grönland in verschiedenen Proben aus Nephelin-Syenit-Pegmatit-Drusen bei Narssârssuk identifiziert. Die Kristalle sind orthorhombisch mit den Formen {100}, {210} und {201}, sie bilden dünne Tafeln nach {100}. Elektronensonden-Analyse und Emissions-Spektrographie ergeben eine chemische Zussammensetzung, die der Idealform nahekommt. Die verfeinerten Zellparameter sind folgende:a=9,835(2) Å,b=11,654(3) Å undc=4,673(1) Å. Barylith ist zweiachsig negativ, 2V =66o±2o,n =1,694,n =1.697 undn calc.= 1,698.
  相似文献   

14.
Comparison between two types of multifractal modeling   总被引：1，自引：0，他引：1  
The interrelationships between two previously developed multifractal models are discussed. These are the Evertsz-Mandelbrot model developed on the basis of the multifractal spectrum f(), and the Schertzer-Lovejoy model based on the codimension function C() where and represent Hölder exponent and field order, respectively. It is shown how these two models are interrelated: they are identical for values of within the range D–(0)D–min. where D is the Euclidean dimension. For D–maxD–(0), however, f() remains a continuous function of whereas C() assumes constant value. In this respect, the fractal spectrum f() can provide more information about the multifractal measure than the codimension function C(). The properties of the two models are illustrated by application to the binomial multiplicative cascade model.  相似文献   

15.
Zusammenfassung Rooseveltit findet sich in der Oxidationszone der Lagerstätten San Francisco de los Andes und Cerro Negro de la Aguadita, in der Provinz San Juan, Argentinien, auf 30°22 S und 69°33 W. Er bildet sehr feinkörnige, weiß-graue, nach Bismuthinit pseudomorphe Aggregate. Die Brechungsindizes liegen zwischenn=2,10 und 2,30. Die Vickershärte beträgt 513 (4–5 der Mohs'schen Härteskala). Mittels Elektronenmikrosonde wurde folgende chemische Zusammensetzung bestimmt: As=21,5±1%, Bi=60,9±2%. Rooseveltit ist monoklin mita 0=6,878(1)Å, b0=7,163(1) Å, c0=6,735(1) Å, =104° 46±1, Z=4, calc.=6,94 g·cm–3, RaumgruppeP 21/n.Rooseveltit wurde nach drei verschiedenen Methoden synthetisiert. Die Pulverdiagramme der synthetischen Produkte stimmen mit dem des Minerals überein. Die Brechungsindizes wurden mitn =2,13(2) bzw. n=2,25(2) und die Dichte mit obs.=7,01 g·cm–3 bestimmt. Zellparameter: a0-6,882(1) Å, b0=7,164(1) Å, c0=6,734(1) Å, =104° 50,5±0,7, calc.=6,94 g·cm–3. Das synthetische Material schmilzt um 950°C. Selbst nach mehrstündigem Erhitzen auf 920°C läßt sich keine Veränderung im Pulverdiagramm des Minerals festellen.Es wird versucht, die natürliche Bildung des Rooseveltits zu erklären.
Rooseveltite from San Francisco de los Andes and Cerro Negro de la Aguadita, San Juan, Argentina
Summary Rooseveltite occurs in the weathering zone of the San Francisco de los Andes and Cerro Negro de la Aguadita mines, located in the San Juan Province, Argentina, at 30° 22S and 69° 33W. It appears in grey, finegrained aggregates pseudomorph after bismuthinite. Refraction index ranges fromn=2.10 to 2.30. The Vickers microhardness is 513 (4–5 of Mohs' scale). Chemical composition from electron micro probe measurements is As 21.5±1% and Bi 60.9±2%. Rooseveltite is monoclinic, with a0=6.878(1) Å, b0=7.163(1) Å, c0=6.735(1) Å, =104° 46±1, Z=4, calc.=6,94 g·cm–3, space groupP 21/n.The synthetic compound was prepared by three different methods. The powder pattern are the same as that of the mineral. Refraction index n=2.13(2) and n=2.25(2). The measured specific gravity is pobs.=7,01 g·cm–3. Cell parameters: a0=6.882(1) Å, b0=7.164(1) Å,c 0=6.734(1) Å, =104° 50.5±0.7, calc.=6,94 g·cm–3. The synthetic material melts at about 950°C. After heating to 920°C no variations were observed in the powder diagram of the mineral.It is tried to explain the formation of rooseveltite in natural environment.

Mit 2 Abbildungen  相似文献   

16.
Zusammenfassung Strontioginorit (Sr, Ca)2B14O23 8 H2O mit Sr: Ca1,3:0,7 tritt in gut ausgebildeten Kristallen im Alteren Steinsalz von Reyershausen bei Göttingen auf. Es ergaben sich folgende Daten : 0 = 12,850 Å,b 0 = 14,48 Å,c 0, = 12,855, Å, = 101° 35, RaumgruppeP 2I/a,Z = 4, Dichte=2,25 gcm–3,n = 1,512,n /b = 1,524,n //[101] = 1,577.  相似文献   

17.
Zusammenfassung Die chemische Analyse des neuen Minerals Johillerit mit der Elektronenmikrosonde ergab: Na2O 5,4, MgO 18,3, ZnO 5,4, CuO 15,8 und As2O5 55,8, Summe 100.7%. Aus diesem Ergebnis wurde die idealisierte Formel Na(Mg, Zn)3 Cu(AsO4)3 abgeleitet. Johillerit ist monoklin mit der RaumgruppeC2/c. Die Gitterkonstanten sind:a=11,870 (3),b=12,755 (3),c=6,770 (2) , =113,42 (2)°,Z=4. Die stärksten Linien des Pulverdiagramms sind: 4,06 (5) (22 ), 3,50 (4) (310), 3,25 (8) (11 ), 2,75 (10) (330, 240), 2,64 (5) (311, 13 , 40 ), 1,952 (4) (13 , 35 ), 1,682 (4) (20 , 460), 1,660 (5) (40 , 71 , 550, 64 ), 1,522 (4) (442, 153, 13 ). Es bestehen enge strukturelle Beziehungen zwischen Johillerit und O'Danielit, Na(Zn, Mg)3H2(AsO4)3, sowie einigen synthetischen. Verbindungen.Johillerit ist violett durchscheinend. Die Spaltbarkeit nach {010} ist ausgezeichnet und nach {100} und {001} gut.H (Mohs)3.D=4,15 undD X =4,21 g·cm–3. Das Mineral ist optisch zweiachsig positiv, 2V80 (5)°. Die Werte der Lichtbrechung sindn =1,715 (4),n =1,743 (4) undn =1,783 (4). Die Auslöschung istn b und auf (010)n c16°. Johillerit ist stark pleochroitisch mit den AchsenfarbenX=violett-rot,Y = blauviolett undZ = grünblau. Das neue Mineral kommt in radialstrahligen Massen gemeinsam mit kupferhaltigem Adamin und Konichalcit in zersetzem Kupfererz von Tsumeb, Namibia, vor. Die Benennung erfolgte nach Prof. Dr.J.-E. Hiller (1911–1972).
Johillerite, Na(Mg, Zn) 3 Cu(AsO 4 ) 3 , a new mineral from Tsumeb, Namibia
Summary Electron microprobe analysis of the new mineral johillerite gave Na2O 5.4, MgO 18.3, ZnO 5.4, CuO 15.8, and As2O5 55.8, total 100.7%. From this result, the ideal formula is given as Na(Mg, Zn)3 Cu(AsO4)3. Johillerite crystallizes monoclinic,C2/c. The unit cell dimensions are:a=11.870(3),b=12.755 (3),c=6.770 (2) , =113.42 (2)°,Z=4. The strongest lines on the X-ray powder diffraction pattern are: 4,06 (5) (22 ), 3,50 (4) (310), 3,25 (8) (11 ), 2,75 (10) (330, 240), 2,64 (5) (311, 13 , 40 ), 1,952 (4) (13 , 35 ), 1,682 (4) (20 , 460), 1,660 (5) (40 , 71 , 550, 64 ), 1,522 (4) (442, 153, 13 ). There is a close relationship between johillerite, o'danielite, Na(Zn, Mg)3H2(AsO4)3, and some synthetic compounds. Johillerite is violet in colour, transparent. Cleavage is {010} perfect, {100} and {001} good.H (Mohs)3.D=4.15 andD X =4.21 g·cm–3. The mineral is optically biaxial positive, 2V80 (5)°. The refractive indices are:n =1.715 (4),n =1.743 (4),n =1.783 (4). The extinction isn b and on (010)n c16°. Strongly pleochroic with axial coloursX=violet-red,Y=bluish violet andZ=greenish blue. The new mineral was found in radiated masses together with cuprian adamite and conichalcite in an oxidized copper ore from Tsumeb, Namibia. It is named in honour of Prof. Dr.J.-E. Hiller (1911–1972).

Mit 1 Abbildung  相似文献   

18.
Summary In saturated rocks and soils it is possible to define different coefficients of thermal expansion depending on the drainage conditions. This topic is first examined from the theoretical point of view with regard to an ideal isotropic thermo-elastic porous medium. Some special features of the behaviour of natural soils and rocks during thermal expansion tests are subsequently discussed. An experimental evaluation of some of these coefficients is presented in the second part of the paper. The material investigated is a pyroclastic rock, the so-called Neapolitan Yellow Tuff. Thermal expansion coefficient in drairend conditions has been evaluated, when this material is saturated with water. The e pressure increase induced by heating has been measured in undrained tes temperatures investigated range between room temperature up to 225°C.Different types of apparatus have been used and, when possible, a comparison between the results has been proposed. The results obtained in undrained thermal expansion tests are in agreement with theoretical predictions. This research is part of an on-going study of the complex phenomena known as Bradyseism, which is occurring in a volcanic area a few kilometers from Naples (Italy). Some considerations on this phenomenon are drawn in the last paragraph of the paper.List of Symbols l linear thermal expansion coefficient - s volumetric thermal expansion coefficient of the solid phase - ss volumetric drained thermal expansion coefficient of the solid skeleton - st volumetric drained thermal expansion coefficient that takes into account variations of porosity induced by heating - t volumetric drained thermal expansion coefficient of the whole system - u volumetric undrained thermal expansion coefficient of the whole system - v volumetric thermal expansion coefficient - w volumetric thermal expansion coefficient of the water - l * volumetric thermal expansion coefficient of the distilled water - Biot's coefficient - d dry specific gravity - s specific gravity of the solid phase - r ' uniaxial compressive strength - r ' yield stress in isotropic compression - B T parameter relating undrained thermally generated pore pressure with temperature change - d 0 maximum uplift during Bradyseismic crises - d f residual uplift during Bradyseismic crises - K s compressibility modulus of the solid phase - K ss compressibility modulus of the solid skeleton - K w compressibility modulus of the water - n porosity - T temperature - T 0 initial temperature in thermal expansion, tests performed in thermal expansion cell - T m temperature at which the volume of waterV Eexpelled from thermal expansion cell. is measured - V volume of the solid skeleton - V E volume expelled from thermal expansion cell - V 0 volume of the expansion cell at temperatureT 0 - V s volume of the solid phase  相似文献   

19.
Iron- and vanadium-bearing kyanites have been synthesized at 900 and 1100° C/20 kb in a piston-cylinder apparatus using Mn2O3/Mn3O4- and MnO/Mn-mixtures, respectively, as oxygen buffers. Solid solubility on the pseudobinary section Al2SiO5-Fe2SiO5(-V2SiO5) of the system Al2O3-Fe2O3(V2O3)-SiO2 extends up to 6.5 mole% (14mole %) of the theoretical end member FeSiO5(V2SiO5) at 900°C/20 kb. For bulk compositions with higher Fe2SiO5 (V2SiO5) contents the corundum type phases M2O3(M = Fe3+, V3+) are found to coexist with the Fe3+(V3+)-saturated kyanite solid solution plus quartz. The extent of solid solubility on the join Al2SiO5-Fe2SiO5 at 1 100°C was not found to be significantly higher than at 900° C. Microprobe analyses of iron bearing kyanites gave no significant indication of ternary solid solubility in these mixed crystals. Lattice constants a 0, b 0, c 0, and V0 of the kyanite solid solutions increase with increasing Fe2SiO5- and V2SiO5-contents proportionally to the ionic radii of Fe3+ and V3+, respectively, the triclinic angles ,, remain constant. Iron kyanites are light yellowish-green, vanadium kyanites are light green. Iron kyanites, (Al1.87 Fe 0.13 3+ )SiO5, were obtained as crystals up to 700 m in length.  相似文献   

20.
Zusammenfassung Admontit ist ein neues Magnesiumborat, das in der Gipslagerstätte Schildmauer bei Admont in der Steiermark (Österreich) in Vergesellschaftung mit drei weiteren neuen borhaltigen Mineralien sowie Gips, Anhydrit, Hexahydrit, Löweit, Quarz und Pyrit auftritt.Das Mineral bildet undeutlich ausgebildete farblose Kristalle von monokliner Symmetrie, die zum Teil nachc gestreckt und tafelig nach {100} sind. Keine Spaltbarkeit, Bruch muschelig, Härte wahrscheinlich 2–3,D gem .=1,82,D x =1,875g·cm–3;n =1,442±0,002,n =1,504±0,002, 2V 30°,r. AE(010),n c auf (010) ca. 45°. a 0=12,68,b 0=10,07,c 0=11,32 Å (alle Werte±0,02 Å),=109,68° (±0,1°),Z=2, RaumgruppeP21/c. Stärkste Linien des Pulverdiagramms: 12,08(9), 7,60(10), 3,93(8), 2,68(9). Formel: 2 MgO·6 B2O3·15 H2O. In Wasser wird Admontit langsam zersetzt. Erhitzungsversuche zeigten, daß das Gitter zwischen 100 und 200°C zerstört wird. Ein Teil des Wassers entweicht schon unterhalb 100°C, der Rest zwischen 150 und 350°C.
Admontite, a new borate mineral from the gypsum deposit Schildmauer near Admont in Styria (Austria)
Summary Admontite is a new magnesium borate found in the gypsum deposit of Schildmauer near Admont in Styria (Austria) in association with three other new borium-containing minerals and with gypsum, anhydrite, hexahydrite, löweite, quartz and pyrite.The mineral occurs in poorly developed colourless crystals of monoclinic symmetry, which in part are elongated along thec axis and flattened on {100}. No cleavage, fracture conchoidal, hardness probably 2–3,D meas .=1.82,D x =1.875g·cm–3.n =1.442±0.002,n =1.504±0.002, 2V 30°,r. AE(010),n c on (010) about 45°.a 0=12.68,b 0=10.07,c 0=11.32 Å (all±0.02 Å), =109.68° (±0.1°),Z=2,space groupP21/c. Strongest lines of the powder pattern: 12.08(9), 7.60(10), 3.93(8), 2.68(9). Chemical composition: 2 MgO·6 B2O3·15 H2O. Admontite is slowly decomposed in water. Investigations of the thermal behaviour show that the lattice breaks down between 100 and 200°C. Part of the water escapes already under 100°C, the rest between 150 and 350°C.

Mit 1 Abbildung

Herrn Univ. Prof. Dr.H. Meixner zum 70. Geburtstag gewidmet.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号