共查询到20条相似文献，搜索用时 187 毫秒
1.
越洋海啸的数值模拟及其对我国的影响分析 总被引：7，自引：2，他引：5
简要介绍了地震海啸产生的物理机制、海啸波在大洋中的传播特性以及海啸所具有的超强破坏力可能引发的巨大灾害;概述了全球地震海啸发生的频率和太平洋区域历史海啸的时空分布;整理分析了我国沿海发生海啸的频次和空间分布。针对越洋海啸传播的特点,采用基于波浪追逐原理和自适应网格加密技术的海啸数值模型对1960智利海啸进行了数值模拟,将模拟的结果与历史记录进行了对比,验证了模型的可靠性。通过对数值模拟结果的分析,初步讨论了我国沿海地区越洋海啸的危险性,并定量阐述了越洋海啸对我国各海区的影响。 相似文献
2.
“3.11”日本地震海啸及南海和琉球群岛假想地震海啸对福建近海影响的数值模拟 总被引：1，自引：0，他引：1
福建地处西北太平洋沿岸,在环太平洋地震带附近,是海啸灾害潜在风险区.＂3.11＂日本地震海啸,福建沿岸验潮站就监测到其海啸波.利用CTSU地震海啸数值模式,模拟了＂3.11＂日本地震海啸对福建近海的影响,模拟结果与实况较吻合.同时,利用该数值模式模拟分析了可能来自于琉球群岛和南海附近海域的地震海啸对福建近海的影响,分析表明,如果在琉球群岛海域（28.0°N,129.0°E）发生8.8级地震,引发的海啸波将在4.5 h左右抵达福建北部海岸,最大海啸波幅可达2 m;如果在马尼拉海沟附近海域（17.5°N,119.0°E）发生8.8级地震,引发的海啸波将在4 h左右抵达福建南部海岸,最大海啸波幅可达3 m,均会给福建沿海地区带来灾害性影响.为此,本文亦针对性提出了防范地震海啸的一些措施与建议,为福建省海洋防灾减灾提供参考. 相似文献
3.
应用内外解匹配的方法和驻相法推导了柱坐标系下地震引起的水面波动方程的解,即推导了地震海啸波生成与传播的理论方程,并对越洋地震海啸理论方程进行了求解。基于Boussinesq方程出发,建立了二维越洋海啸波传播数学模型,并对越洋海啸进行了数值计算,计算方法采用有限差分方法,差分格式采用交替方向隐格式(Alternating Direction Implicit即ADI方法)。利用越洋海啸计算模式对发生在大洋中的地震海啸进行了模拟,将数值模拟结果与地震海啸波理论方程的计算结果进行了比较,两种计算结果吻合较好。 相似文献
4.
数值模拟作为海啸预报的主要研究方法在海啸预警中起着关键作用。本文采用Godunov格式的有限体积方法,使用MUSCL-Hancock格式,并利用HLLC Riemann近似求解器计算单元界面上的流体通量,建立了球坐标系下二阶精度的海啸数值模型。模型所基于的全和谐型浅水方程保证了数值的稳定性,而地形重构方法实现了干湿边界的精准模拟。本文模拟了2015年9月16日智利Mw8.3级地震海啸,通过与智利近岸14个测站和环太平洋20个DART浮标实测数据比较,验证了模型对实际越洋海啸模拟预报的能力。 相似文献
5.
2015年9月16日22时54分（当地时间）智利中部近岸发生Mw8.3级地震,震源深度25 km。同时,强震的破裂区长200 km,宽100 km,随之产生了中等强度的越洋海啸。海啸影响了智利沿岸近700 km的区域,局部地区监测到近5 m的海啸波幅和超过13 m的海啸爬坡高度。太平洋区域的40多个海啸浮标及200多个近岸潮位观测站详细记录了此次海啸的越洋传播过程,为详细研究此次海啸近场及远场传播及演化规律提供了珍贵的数据。本文选择有限断层模型和自适应网格海啸数值模型建立了既可以兼顾越洋海啸的计算效率又可以实现近场海啸精细化模拟的高分辨率海啸模型。模拟对比分析了海啸的越洋传播特征,结果表明采用所建立的模型可以较好地再现远场及近场海啸特征,特别是对近场海啸的模拟结果非常理想。表明有限断层可以较好地约束近场、特别是局部区域的破裂特征,可为海啸预警提供更加精确的震源信息,结合高分辨率的海啸数值预报模式实现海啸传播特征的精细化预报。本文结合观测数据与数值模拟结果初步分析了海啸波的频散特征及其对模型结果的影响。同时对观测中典型的海啸波特征进行的简要的总结。谱分析结果表明海啸波的能量主要分布在10~50 min周期域内。这些波特征提取是现行海啸预警信息中未涉及,但又十分重要的预警参数。进一步对这些波动特征的详细研究将为海啸预警信息及预警产品的完善提供技术支撑。 相似文献
6.
2016年全球地震海啸监测预警与数值模拟研究 总被引：2，自引：0，他引：2
回顾了国家海洋环境预报中心(国家海洋局海啸预警中心)2016年全球地震海啸监测预警的总体状况, 并基于震源生成模型和海啸传播数值模型的计算结果详细介绍了几次主要海啸事件及其影响特性。2016年全年国家海洋环境预报中心总共对全球6.5级(中国近海5.5级)以上海底地震响应了45次,发布海啸信息81期, 没有发生对我国有明显影响的海啸。结合精细化的数值模拟结果和浮标监测数据,重点介绍了苏门达腊7.8级地震海啸、厄瓜多尔7.8级地震海啸、新西兰7.1级和7.8级地震海啸, 以及所罗门7.8级地震海啸的波动特征和传播规律, 模拟结果与实测海啸波符合较好。针对厄瓜多尔7.8级地震海啸事件, 本文比较分析了均匀断层模型和多源有限断层模型对模拟结果的影响; 针对新西兰7.1级地震海啸, 探讨了色散效应对海啸波在大水深、远距离传播过程的影响规律。 相似文献
7.
2011-03-11日本东北部地震海啸发生后,围绕日本南海海沟发生潜在9级地震的可能性也进一步增大。采用高精度高分辨率有限体积浅水波数值模型GeoClaw对日本东北大地震海啸的产生、传播过程进行数值模拟研究,模拟结果对比海上浮标观测数据及中国东部沿海验潮站记录数据可知首波波峰偏差小于10%,表明模型GeoClaw可以很好地模拟海啸在大洋中及东海大陆架的传播过程。利用模型GeoClaw对日本南海海沟9级地震断层模型进行海啸数值模拟研究。研究表明,地震引发的海啸波能量巨大,同时向各个方向传播。地震发生5h后海啸波到达中国东部福建沿海地区,进而影响浙江、上海、江苏等沿海地区,海啸波高可达到1 m以上。鉴于日本南海海沟大地震发生的历史性规律及对中国东部沿海地区造成的潜在灾害,需要对其进行相应的数值模拟研究。 相似文献
8.
本文基于有限断层模型和OKADA 位错模型计算海表变形场作为初始条件，利用MOST 海啸数值模型模拟分析了2010年智利和2011 年日本地震海啸在我国东南沿海地区的海啸传播特征，海啸波模拟结果与观测数据吻合较好。重点研究分析了沈家门港口海域的海啸波流特征及其诱导的涡旋结构。研究结果表明：尽管两次事件的海啸源位置及破裂特征完全不同，但海啸波流在我国东南沿岸的分布特征大致相似；另外相对于海啸波幅而言，港湾中海啸流具有更强的空间差异性，港口入口、岬角地形处和岛屿间水道中往往会有强流存在。尽管这两次越洋海啸均未能在我国东南沿海引发淹没情形，但通过数值计算发现局部均存在超过3 m/s 以上的强流，因此进行海啸预警及风险管理时应综合考虑海啸波流的影响。 相似文献
9.
10.
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
13.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
14.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
15.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
16.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
17.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
18.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
19.
The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics. 相似文献
20.