共查询到20条相似文献，搜索用时 359 毫秒
1.
Devana Chasma is a rift system on Venus formed in association with the Beta Regio and Phoebe Regio volcanic highlands, which are interpreted as mantle plumes. We present a new analysis of a 2500-km-long segment of Devana. Based on the rift topography, the horizontal extension across the rift boundary faults is 3–9 km. This is a lower bound on the total rift extension because the altimetry does not resolve the topographic relief across the numerous faults that are visible in radar images of the rift floor. The total extension across Devana is approximately 20 km, similar in magnitude to continental rift systems on Earth. Rift flank elevations are up to 3.1 km in the regions nearest the mantle plumes and decay strongly with increasing distance from the plumes, indicating a strong thermal component to the rift flank topography, unlike the situation usually reported for terrestrial rifts. As on Earth, there is also a flexural uplift component to the flank topography. Rift depths are up to 2.5 km below the surrounding plains, with considerable along-strike variability. There is a 600 km lateral offset along Devana Chasma near the mid-point between the two mantle plumes. Devana most likely formed as two distinct rifts due to the horizontal stresses created by outflow from the upwelling plumes. The offset zone formed as a result of the interaction between the two rift tips, which requires that upwelling at the two mantle plumes overlapped in time. 相似文献
2.
Evolution of the eastern margin of Korea: Constraints on the opening of the East Sea (Japan Sea) 总被引：2，自引：2，他引：2
Han-Joon Kim Gwang Hoon Lee Hyeong-Tae Jou Hyun-Moo Cho Hai-Soo Yoo Gun-Tae Park Ji-Soo Kim 《Tectonophysics》2007,436(1-4):37-55
We interpreted marine seismic profiles in conjunction with swath bathymetric and magnetic data to investigate rifting to breakup processes at the eastern Korean margin that led to the separation of the southwestern Japan Arc. The eastern Korean margin is rimmed by fundamental elements of rift architecture comprising a seaward succession of a rift basin and an uplifted rift flank passing into the slope, typical of a passive continental margin. In the northern part, rifting occurred in the Korea Plateau that is a continental fragment extended and partially segmented from the Korean Peninsula. Two distinguished rift basins (Onnuri and Bandal Basins) in the Korea Plateau are bounded by major synthetic and smaller antithetic faults, creating wide and considerably symmetric profiles. The large-offset border fault zones of these basins have convex dip slopes and demonstrate a zig-zag arrangement along strike. In contrast, the southern margin is engraved along its length with a single narrow rift basin (Hupo Basin) that is an elongated asymmetric half-graben. Analysis of rift fault patterns suggests that rifting at the Korean margin was primarily controlled by normal faulting resulting from extension rather than strike-slip deformation. Two extension directions for rifting are recognized: the Onnuri and Hupo Basins were rifted in the east-west direction; the Bandal Basin in the east–west and northwest–southeast directions, suggesting two rift stages. We interpret that the east–west direction represents initial rifting at the inner margin; while the Japan Basin widened, rifting propagated southeastward repeatedly from the Japan Basin toward the Korean margin but could not penetrate the strong continental lithosphere of the Korean Shield and changed the direction to the south, resulting in east–west extension to create the rift basins at the Korean margin. The northwest–southeast direction probably represents the direction of rifting orthogonal to the inferred line of breakup along the base of the slope of the Korea Plateau; after breakup the southwestern Japan Arc separated in the southeast direction, indicating a response to tensional tectonics associated with the subduction of the Pacific Plate in the northwest direction. No significant volcanism was involved in initial rifting. In contrast, the inception of sea floor spreading documents a pronounced volcanic phase which appears to reflect asthenospheric upwelling as well as rift-induced convection particularly in the narrow southern margin. We suggest that structural and igneous evolution of the Korean margin, although it is in a back-arc setting, can be explained by the processes occurring at the passive continental margin with magmatism influenced by asthenospheric upwelling. 相似文献
3.
Close relationships between deformation and volcanism are well documented in relatively late evolutionary stages of continental rifting, whereas these are poorly constrained in less mature rifting stages. To investigate the control of inherited structures on faulting and volcanism, we present a statistical analysis of volcanic features, faults and pre‐rift fabric in the Tanzania Divergence, where volcanic features occur extensively in in‐rift and off‐rift areas. Our results show that in mature rift sectors (Natron), magma uprising is mostly controlled by fractures/faults responding to the far‐field stress, whereas the distribution of volcanism during initial rifting (Eyasi) is controlled by inherited structures oblique to the regional extension direction. Off‐rift sectors show a marked control of pre‐rift structures on magma emplacement, which may not respond to the regional stress field. Thus, the use of off‐rift magmatic features as stress indicators should take into account the role of pre‐existing structures. 相似文献
4.
本篇讨论大陆岩石圈拆沉、伸展与裂解作用过程。由于大陆岩石圈厚度大而且很不均匀,产生裂谷的机制比较复杂。大陆碰撞远程效应的触发,岩石圈拆沉,以及板块运动的不规则性和地球应力场方向转折,都可能产生岩石圈断裂和大陆裂谷。岩石圈拆沉为在重力作用下"去陆根"的作用过程,演化过程可分为大陆根拆离、地壳伸展和岩石圈地幔整体破裂三个阶段。大陆碰撞带、俯冲的大陆和大洋板块、克拉通区域岩石圈,都可能产生岩石圈拆沉。大陆岩石圈调查表明,拉张区可见地壳伸展、岩石圈拆离、软流圈上拱和热沉降;它们是大陆岩石圈伸展与裂解早期的主要表现。从初始拉张的盆岭省到成熟的张裂省,拆离后地壳伸展成复式地堑,下地壳幔源玄武岩浆侵位,断裂带贯通并切穿整个岩石圈,表明地壳伸展进入成熟阶段。中国东北松辽盆地和西欧北海盆地曾处于成熟的张裂省。岩石圈破裂为岩浆侵位提供了阻力很小的通道网。岩浆侵位作用伴随岩石圈破裂和热流体上涌,成熟的张裂省可发展成大陆裂谷。多数的大陆裂谷带并没有发展成威尔逊裂谷带和洋中脊,普通的大陆裂谷要演化为威尔逊裂谷带,必须有来自软流圈的长期和持续的热流和玄武质岩浆的供应。威尔逊裂谷带岩石圈地幔和软流圈为地震低速带,其根源可能与来自地幔底部的地幔热羽流有关。 相似文献
5.
Late Mesozoic and Cenozoic rifting and its dynamic setting in Eastern China and adjacent areas 总被引：45，自引：0，他引：45
During the Late Mesozoic and Cenozoic, extension was widespread in Eastern China and adjacent areas. The first rifting stage spanned in the Late Jurassic–Early Cretaceous times and covered an area of more than 2 million km2 of NE Asia from the Lake Baikal to the Sikhot-Alin in EW direction and from the Mongol–Okhotsk fold belt to North China in NS direction. This rifting was characterized by intracontinental rifts, volcanic eruptions and transform extension along large-scale strike–slip faults. Based on the magmatic activity, filling sequence of basins, tectonic framework and subsidence analysis of basins, the evolution of this area can be divided into three main developmental phases. The first phase, calc-alkaline volcanics erupted intensely along NNE-trending faults, forming Daxing'anling volcanic belt, NE China. The second phase, Basin and Range type fault basin system bearing coal and oil developed in NE Asia. During the third phase, which was marked by the change from synrifting to thermal subsidence, very thick postrift deposits developed in the Songliao basin (the largest oil basin in NE China).Following uplift and denudation, caused by compressional tectonism in the near end of Cretaceous, a Paleogene rifting stage produced widespread continental rift systems and continental margin basins in Eastern China. These rifted basins were usually filled with several kilometers of alluvial and lacustrine deposits and contain a large amount of fossil fuel resources. Integrated research in most of these rifting basins has shown that the basins are characterized by rapid subsidence, relative high paleo-geothermal history and thinned crust. It is now accepted that the formation of most of these basins was related to a lithospheric extensional regime or dextral transtensional regime. During Neogene time, early Tertiary basins in Eastern China entered a postrifting phase, forming regional downwarping. Basin fills formed in a thermal subsidence period onlapped the fault basin margins and were deposited in a broad downwarped lacustrine depression. At the same time, within plate rifting of the Lake Baikal and Shanxi graben climaxed and spreading of the Japan Sea and South China Sea occurred. Quaternary rifting was marked by basalt eruption and accelerated subsidence in the area of Tertiary rifting. The Okinawa Trough is an active rift involving back-arc extension.Continental rifting and marginal sea opening were clearly developed in various kind of tectonic settings. Three rifting styles, intracontinental rifting within fold belt, intracontinental rifting within craton and continental marginal rifting and spreading, are distinguished on the basis of nature of the basin basement, tectonic location of rifting and relations to large strike–slip faults.Changes of convergence rates of India–Eurasia and Pacific–Eurasia may have caused NW–SE-trending extensional stress field dominating the rifting. Asthenospheric upwelling may have well assisted the rifting process. In this paper, a combination model of interactions between plates and deep process of lithosphere has been proposed to explain the rifting process in East China and adjacent areas.The research on the Late Mesozoic and Cenozoic extensional tectonics of East China and adjacent areas is important because of its utility as an indicator of the dynamic setting and deformational mechanisms involved in stretching Lithosphere. The research also benefits the exploration and development of mineral and energy resources in this area. 相似文献
6.
Review of the tectonics of the Levant Rift system: the structural significance of oblique continental breakup 总被引：3，自引：0，他引：3
The Levant Rift system is an elongated series of structural basins that extends for more than 1000 km from the northern Red Sea to southern Anatolia. The system consists of three major segments, the Jordan Rift in the south, El Gharb–Kara-Su Rift in the north, and the Lebanese Fault splay in between. The rifted parts of this structural system are accompanied by intensively uplifted margins that mirror-image the basinal pattern, namely, the deeper the basin—the higher its margins, and vice versa. Uplifts also occur along the fault splay section. The Jordan Rift comprises axial basins that diminish in size from the south northwards, and are separated from each other by shallow threshold zones along the axis of the rift, where the margins are also subdued. The Lebanese Fault splay consists of five faults that emerge from the northern edge of the Jordan Rift and trend like a fan between the north and the northeast. One of these faults connects the Jordan and El Gharb–Kara-Su rifts. The Levant Rift and its uplifted margins started to develop in the middle-late Miocene, and most of the structural development occurred in the Plio-Pleistocene.The Levant Rift system is characterized by its oblique displacement, and evidence for both dip-slip and strike-slip displacement was measured on its faults. Earthquakes also indicate that same mixed pattern, some of them show strike-slip offset, and others normal. It is generally conceded that the amount of normal offset along the boundary faults of the Rift system reaches 8–10 km, but the lateral displacement is disputed, and offsets ranging from 11 to 107 km were suggested. Assessment of the available data led us to suggest that the sinistral offset along the Levant Rift system is approximately 10–20 km. The similarity between the vertical and the lateral displacements, the basin and threshold structural pattern of the Rift, model experiments in oblique rifting, as well as the significant tectonic resemblance to the Red Sea and the East African rifts, indicate that the Levant Rift is the product of continental breakup, and it is probably an emerging oceanic spreading center. 相似文献
7.
Structural studies of the Barmer Basin in Rajasthan, northwest India, demonstrate the important effect that pre-existing faults can have on the geometries of evolving fault systems at both the outcrop and basin-scale. Outcrop exposures on opposing rift margins reveal two distinct, non-coaxial extensional events. On the eastern rift margin northwest–southeast extension was accommodated on southwest- and west-striking faults that form a complex, zig-zag fault network. On the western rift margin northeast–southwest extension was accommodated on northwest-striking faults that form classical extensional geometries.Combining these outcrop studies with subsurface interpretations demonstrates that northwest–southeast extension preceded northeast–southwest extension. Structures active during the early, previously unrecognised extensional event were variably incorporated into the evolving fault systems during the second. In the study area, an inherited rift-oblique fault transferred extension from the rift margin to a mid-rift fault, rather than linking rift margin fault systems directly. The resultant rift margin accommodation structure has important implications for early sediment routing and depocentre evolution, as well as wider reaching implications for the evolution of the rift basin and West Indian Rift System. The discovery of early rifting in the Barmer Basin supports that extension along the West Indian Rift System was long-lived, multi-event, and likely resulted from far-field plate reorganisations. 相似文献
8.
Zorin Turutanov V. V. Mordvinova V. M. Kozhevnikov T. B. Yanovskaya A. V. Treussov 《Tectonophysics》2003,371(1-4):153-173
The main chain of SW–NE-striking Cenozoic half-grabens of the Baikal rift zone (BRZ) follows the frontal parts of Early Paleozoic thrusts, which have northwestern and northern vergency. Most of the large rift half-grabens are bounded by normal faults at the northwestern and northern sides. We suggest that the rift basins were formed as a result of transformation of ancient thrusts into normal listric faults during Cenozoic extension.Seismic velocities in the uppermost mantle beneath the whole rift zone are less than those in the mantle beneath the platform. This suggests thinning of the lithosphere under the rift zone by asthenosphere upwarp. The geometry of this upwarp and the southeastward spread of its material control the crustal extension in the rift zone. This NW–SE extension cannot be blocked by SW–NE compression generated by pressure from the Indian lithospheric block against Central Asia.The geochemical and isotopic data from Late Cenozoic volcanics suggest that the hot material in the asthenospheric upwarp is probably provided by mantle plumes. To distinguish and locate these plumes, we use regional isostatic gravity anomalies, calculated under the assumption that topography is only partially compensated by Moho depth variations. Variations of the lithosphere–asthenosphere discontinuity depth play a significant role in isostatic compensation. We construct three-dimensional gravity models of the plume tails. The results of this analysis of the gravity field are in agreement with the seismic data: the group velocities of long-period Rayleigh waves are reduced in the areas where most of the recognized plumes are located, and azimuthal seismic anisotropy shows that these plumes influence the flow directions in the mantle above their tails.The Baikal rift formation, like the Kenya, Rio Grande, and Rhine continental rifts [Achauer, U., Granet, M., 1997. Complexity of continental rifts as revealed by seismic tomography and gravity modeling. In: Jacob, A.W.B., Delvaux, D., Khan, M.A. (Eds.), Lithosphere Structure, Evolution and Sedimentation in Continental Rifts. Proceedings of the IGCP 400 Meeting, Dublin, March 20–22, 1997. Institute of Advanced Studies, Dublin, pp. 161–171], is controlled by the three following factors: (i) mantle plumes, (ii) older (prerift) linear lithosphere structures favorably positioned relative to the plumes, and (iii) favorable orientation of the far-field forces. 相似文献
9.
Freddy Corredor 《Tectonophysics》2003,372(3-4):147-166
Remote sensing and field studies of several extensional basins along the northern margin of the Gulf of Aden in Yemen show that Oligocene–Miocene syn-rift extension trends N20°E on average, in agreement with the E–W to N120°E strike of main rift-related normal faults, but oblique to the main trend of the Gulf (N70°E). These faults show a systematic reactivation under a 160°E extensional stress that we interpret also as syn-rift. The occurrence of these two successive phases of extension over more than 1000 km along the continental margin suggests a common origin linked to the rifting process. After discussing other possible mechanisms such as a change in plate motion, far-field effects of Arabia–Eurasia collision, and stress rotations in transfer zones, we present a working hypothesis that relates the 160°E extension to the westward propagation since about 20 Ma of the N70°E-trending, obliquely spreading, Gulf of Aden oceanic rift. The late 160°E extension, perpendicular to the direction of rift propagation, could result from crack-induced extension associated with the strain localization that characterises the rift-to-drift transition. 相似文献
10.
论博格达俯冲撕裂型裂谷的形成与演化 总被引：66，自引：23，他引：43
博格达裂谷带位于准噶尔与吐－哈两个前寒武纪地块之间,呈东－西走向,东端与克拉麦里－哈尔里克泥盆－石炭纪火山弧呈大角度相交。该 裂谷于早－中石炭世启动和沉降,在盆地中堆积了巨厚的陆源碎屑岩夹双峰式火山岩。裂谷的闭合发生于中石炭世末至晚石炭世。在裂谷闭合后区域构造由挤压向拉张的转折时期,发生了以辉绿岩为主的侵入活动,并伴有少量中－酸性分异产物。博格达裂谷东、西两段的演化特征有着显著差异。东段早石炭世就已开始裂离,裂离过程的火山岩以玄武岩为主,仅有少量流纹岩,裂谷盆地强烈沉降,形成深海－半深海环境,裂谷在中石炭世末至晚石炭世初即已闭合,裂谷岩系因强烈褶皱,与上覆二叠系呈明显角度不整合,显示了“突变”式闭合特征。与此不同的是,西段至中石炭世才开始明显裂离,裂离过程的火山岩以英安岩和流纹岩为主,玄武岩量较少,火山－沉积岩系均形成于浅海环境,裂谷至晚石炭世末才发生闭合,裂谷岩系因未发生强烈褶皱,故与上覆二叠系为平行不整合接触,显示了“渐变”式闭合特征。该裂谷的形成是古亚洲洋壳向先存的准－吐－哈陆块斜向俯冲,将其东南端撕裂的产物,因而可称为俯冲撕裂型裂谷。演化过程沿走向的明显不均一性是这类裂谷的重要特点。 相似文献
11.
O.P. Polyansky A.V. Prokopiev O.V. Koroleva M.D. Tomshin V.V. Reverdatto A.V. Babichev V.G. Sverdlova D.A. Vasiliev 《Russian Geology and Geophysics》2018,59(10):1217-1236
Possible mechanisms of rifting and the thermal regime of the lithosphere beneath the rift zone of the Vilyui sedimentary basin are considered based on the available isotopic ages of dike swarms, rates of sedimentation, and results of numerical modeling. Temporal correlations between the intrusion of mafic magma and a sharp increase in the rate of subsidence and sedimentation in the rift basin prove the contribution of both plate-tectonic and magmatic factors to the formation of the Vilyui rift. The results show a relationship between the rapid extension of the lithosphere and the formation of mafic dike swarms in the Yakutsk-Vilyui Large Igneous Province of the Siberian Platform at the Frasnian-Famennian boundary, with a peak at ~ 374.1 Ma, and at the end of the Late Devonian, with a peak at ~ 363.4 Ma. There were two pulses of dike formation during rapid subsidence of the basin basement in the period 380-360 Ma, with a sedimentation rate of 100-130 m/Myr, at a background rate of 10-20 m/Myr. Analysis of numerical thermomechanical models revealed that the best-fit model is that combining the mechanisms of intraplate extension (passive rifting) and the ascent of a mantle magmatic diapir (active rifting). A conclusion about the nature of the heat source of trap magmatism has been drawn: The plume-driven regime of the lithosphere can better explain the dynamics of extension during rifting than the decompression melting mechanism. 相似文献
12.
Continental rift systems and anorogenic magmatism 总被引：1，自引：0，他引：1
Precambrian Laurentia and Mesozoic Gondwana both rifted along geometric patterns that closely approximate truncated-icosahedral tessellations of the lithosphere. These large-scale, quasi-hexagonal rift patterns manifest a least-work configuration. For both Laurentia and Gondwana, continental rifting coincided with drift stagnation, and may have been driven by lithospheric extension above an insulated and thermally expanded mantle. Anorogenic magmatism, including flood basalts, dike swarms, anorthosite massifs and granite-rhyolite provinces, originated along the Laurentian and Gondwanan rift tessellations. Long-lived volcanic regions of the Atlantic and Indian Oceans, sometimes called hotspots, originated near triple junctions of the Gondwanan tessellation as the supercontinent broke apart. We suggest that some anorogenic magmatism results from decompression melting of asthenosphere beneath opening fractures, rather than from random impingement of hypothetical deep-mantle plumes. 相似文献
13.
珠江口盆地白云凹陷新生代构造演化动力学 总被引：42，自引：0，他引：42
白云凹陷构造演化史的研究对在白云凹陷开展油气勘探和深水沉积研究具有重要的意义。通过对断裂与沉积结构平面和剖面特点的分析,结合岩浆活动特点,文中提出白云凹陷是一个复式地堑,推测这种结构特点与凹陷下地壳的强烈韧性减薄和颈缩变形有关,表现为热岩石圈的伸展。其发育机制推测与白云凹陷位于构造转换带上有关,特殊的构造位置使白云凹陷成为强烈构造变形区,岩石圈地壳强烈减薄,伴随伸展过程和地幔上涌,脆性地壳或上地幔中部分熔融物质的出现导致岩石圈强度的急剧降低,在区域伸展应力场下以韧性流变方式减薄。岩浆在构造转换带下聚集并发育主岩浆房,由于白云凹陷南北边缘没有发育正断裂系统,岩浆主要沿垂直伸展的方向运移,因此在珠琼运动一幕和二幕南南东向伸展应力作用下,岩浆向白云凹陷的东部和西部运移至北西向基底深大断裂处,那里由于北西向断裂表现为左行张剪性质而成为压力较低的地区,从而成为岩浆上涌和侵位的地方。在岩浆聚集的地区,活动岩浆体附近的脆性变形被分散的韧性变形所取代,因此在凹陷的东北和西南两个角上,发育了张性和张剪性小断裂群,由于热岩石圈弹性较差,白云凹陷长期持续沉降。白云凹陷的断裂活动和沉积演化史还受到南海海盆扩张活动的影响。 相似文献
14.
自中生代末期以来,东北地区形成了以松辽地堑为主体,联合下辽河裂谷、伊通-依兰裂谷、抚顺-密山裂谷以及邻近断陷盆地的大陆裂谷系,并向南北两端延伸,在亚洲东部构成一条大的裂谷带。这个大陆裂谷系的形成和发展是由中央向两侧展开的,与板块俯冲、弧后扩张密切相关。 相似文献
15.
Affected by thermal perturbation due to mantle uprising,the rheological structure of the lithosphere could be modified,which could lead to different rifting patterns from shelf to slope in a passive continental margin.From the observed deformation style on the northern South China Sea and analogue modeling experiments,we find that the rift zone located on the shelf is characterized by half grabens or simple grabens controlled mainly by long faults with large vertical offset,supposed to be formed with normal lithasphere extension.On the slope,where the lithosphere is very hot due to mantle upwelling and heating,composite grabens composed of symmetric grabens developed.The boundary and inner faults are all short with small vertical offset.Between the zones with very hot and normal lithosphere,composite half grnbens composed of half grabens or asymmetric grabens formed,whose boundary faults are long with large vertical offset,while the inner faults are relatively short.Along with the thickness decrease of the brittle upper crust due to high temperature,the deformation becomes more sensitive to the shape of a pre-existing weakness zone and shows orientation variation along strike.When there was a bend in the pre-existing weakness zone,and the basal plate was pulled by a clockwise rotating stress,the strongest deformation always occurs along the middle segment and at the transition area from the middle to the eastern segments,which contributes to a hotter lithosphere in the middle segment,where the Baiyun (白云) sag formed. 相似文献
16.
Field study of the Hadahid Block (the eastern margin of the central half-graben of the Suez rift) indicates two listric normal faults at its eastern and western boundaries, the rift-bounding fault and the Hadahid Fault, respectively. These faults were affected by two episodes of movement. The earlier movement (at the initial, Neogene rift opening) led to equal displacements on the two faults whereas the later movement (at the mid-Clysmic event, l7 Ma ago) caused the Hadahid Fault to bound the deep part of the central half-graben. A similar conclusion is also reached for the western margin of the southern half-graben of the rift (Esh El Mellaha and Zeit Blocks). The two listric faults bounding the margin blocks in these two oppositely tilted half-grabens (Hadahid and Esh El Mellaha Blocks) join at depth into a ramp-flat detachment. This geometry of the rift-bounding faults represents an intermediate stage in the evolution of rift basins. It is preceded by the early rifting stage where extension is less and oppositely tilted half-grabens are formed (e.g. the ancestral Red Sea-Gulf of Suez rift). Increased extension at later stages leads to the prevailance of one system of detachment instead of oppositely dipping detachments of adjacent half-grabens. The central and southern Red Sea have perhaps had this geometry before the onset of seafloor spreading. 相似文献
17.
Dynamic causes for the opening of the Baikal Rift Zone: a numerical modelling approach 总被引：1，自引：0，他引：1
Previous dynamic models of the Baikal Rift Zone (BRZ) are mostly two-dimensional on vertical plane. In this study, a numerical model of neotectonics in the region on map view was constructed using the adapted PLATES program. The present work is an attempt to test different mechanisms for opening Baikal Rift by comparing the modelled and observed stress and strain rate fields. The following rifting scenarios were tested: (1) pure northwest–southeast extension, (2) pure northeast–southwest compression, (3) oblique rift opening and (4) combined northwest–southeast extension and northeast–southwest compression. The models are calibrated using geologically and GPS-derived strain rates and stress-tensor determinations from fault-slip data and earthquake focal mechanisms. The most successful model requires a combination of NE–SW compression and orthogonal extension. The model results indicate that the present extensional regime in BRZ can be explained by combining the India plate indentation northward into Eurasia, east–west convergence between the North America and Eurasia plates and southeastward extrusion of the Amur plate in northeastern Asia. Predicted fault-slip rates for the best-fit model are consistent with the observed Holocene fault-slip rates in the Lake Baikal region. The generally accepted rotation of the Amur and Mongolia microplates are used as independent constraints for the choice of the best-fit model. These data correlate well with the predicted direction of rotation in our best model. 相似文献
18.
The Aravalli mountain range (AMR) in the northwestern part of the Indian Peninsula consists of two main Proterozoic metasedimentary and metaigneous sequences, the Aravalli and Delhi Supergroups, respectively, which rest over the Archaean gneissic basement. A synthesis and reinterpretation of the available geological, geochronological and geophysical data, including results of own field work and geophysical interpretations pertaining to the AMR, indicate its origin as an inverted basin: rifting into granitoid basement began ca. 2.5; Ga ago with Aravalli passive rifting (ca. 2.5–2.0 Ga) and Delhi active rifting (ca. 1.9–1.6 Ga). Associated mafic igneous rocks show both continental and oceanic tholeiitic geochemistry and are comparable with Phanerozoic, rift-related magmatic products. Available data showed no conclusive evidence for oceanic lithoshere and island-arc/active margin magmatic activity in the AMR. Subsequent inversion and orogeny (Delhi orogeny, ca. 1.5-1.4 Ga) lead to complex deformation and metamorphism. Only in the western and central zones has the basement been involved in this mid-Proterozoic (Delhi) deformation, whereas it is unaffected in the eastern part, except for local shear zones mainly along the basement/cover interface. The grade of metamorphism increases from the greenschist facies in the east to the amphibolite facies in the west with local HP assemblages. These latter are explained by rapid burial and exhumation of thin and cool continental lithosphere. Subsequently, during a final, mild phase of inversion, the Vindhyan basins consisting mainly of sandstones, limestones and shales, flanking the AMR formed which are comparable to foreland basins. The tectonic evolution of the AMR is therefore interpreted as an example of a major inverted continental rift and of a Proterozoic intra-continental orogen. 相似文献
19.
To better understand how active deformation localizes within a continental plate in response to extensional and transtensional tectonics, a combined analysis of high-quality gravity (Bouguer anomaly) and seismicity data is presented consisting of about 35000 earthquakes recorded in the Baikal Rift Zone. This approach allows imaging of deformation patterns from the surface down to the Moho. A comparison is made with heat flow variations in order to assess the importance of lithospheric rheology in the style of extensional deformation. Three different rift sectors can be identified. The southwestern rift sector is characterized by strong gravity and topography contrasts marked by two major crustal faults and diffuse seismicity. Heat flow shows locally elevated values, correlated with recent volcanism and negative seismic P-velocity anomalies. Based on earthquake fault plane solutions and on previous stress field inversions, it is proposed that strain decoupling may occur in this area in response to wrench-compressional stress regime imposed by the India–Asia collision. The central sector is characterized by two major seismic belts; the southernmost one corresponds to a single, steeply dipping fault accommodating oblique extension; in the centre of lake Baikal, a second seismic belt is associated with several dip-slip faults and subcrustal thinning at the rift axis in response to orthogonal extension. The northern rift sector is characterized by a wide, low Bouguer anomaly which corresponds to a broad, high topographic dome and seismic belts and swarms. This topography can be explained by lithospheric buoyancy forces possibly linked to anomalous upper mantle. At a more detailed scale, no clear correlation appears between the surficial fault pattern and the gravity signal. As in other continental rifts, it appears that the lithospheric rheology influences extensional basins morphology. However, in the Baikal rift, the inherited structural fabric combined with stress field variations results in oblique rifting tectonics which seem to control the geometry of southern and northeastern rift basins. 相似文献
20.
With oblique rifting, both extension perpendicular to the rift trend and shear parallel to the rift trend contribute to rift formation. The relative amounts of extension and shear depend on α, the acute angle between the rift trend and the relative displacement direction between opposite sides of the rift. Analytical and experimental (clay) models of combined extension and left-lateral shear suggest the fault patterns produced by oblique rifting. If α is less than 30°, conjugate sets of steeply dipping strike-slip faults form in rifts. Sinistral and dextral strike-slip faults trend subparallel and at large angles to the rift trend, respectively. If α is about 30°, strike-slip, oblique-slip and/or normal faults form in rifts. Faults with sinistral and dextral strike slip trend subparallel and at large angles to the rift trend, respectively. Normal faults strike about 30° counterclockwise from the rift trend. If α exceeds 30°, normal faults form in rifts. They have moderate dips and generally strike obliquely to the rift trend and to the relative displacement direction between opposite sides of the rift. If α equals 90°, the normal faults strike parallel to the rift trend and perpendicularly to the displacement direction.The modeling results apply to the Gulf of California and Gulf of Aden, two Tertiary continental rift systems produced by combined extension and shear. Our results explain the presence and trends of oblique-slip and strike-slip faults along the margins of the Gulf of California and the oblique trend (relative to the rift trend) of many normal faults along the margins of both the Gulf of California and the Gulf of Aden. 相似文献