共查询到19条相似文献，搜索用时 218 毫秒
1.
提出了基于支持向量机（SVM）的边坡可靠度分析新算法。该方法采用均匀设计确定样本点,通过一定数量的确定性计算来训练SVM,拟合边坡的功能函数;采用一阶可靠度方法（FORM）和迭代算法优化SVM模型,获得可靠度指标和验算点信息;在SVM模型基础上进一步通过二阶可靠度方法（SORM）和蒙特卡罗模拟（MCS）计算边坡的失稳概率。以两个典型边坡为例,通过与其他方法比较,证明了该方法的准确性和高效性。结果表明：提出的在标准正态空间（U空间）中取样并构建SVM,在原始空间（X空间）中计算功能函数的算法,有效地解决了具有相关非正态分布变量的可靠度分析问题,并且可很容易扩展到SORM的计算。算例结果证明,该方法的精度高于FORM;而效率优于MCS。分析过程中,边坡安全系数计算和可靠度分析相互独立。因此,该方法既适用于具有显式功能函数的简单问题,也适用于需要软件计算安全系数的实际边坡问题。 相似文献
2.
《岩土力学》2017,(Z1):255-262
通过反向采用极向条分的极限分析上限法获取临界强度参数对,拟合得到预应力锚索边坡对应的抗震全局极限响应面方程,将其作为内核函数使用Monte Carlo模拟得到特定地震烈度下的预应力锚索加固边坡的失稳概率和可靠度指标,避免直接使用极限分析上限法而造成的抽样和寻优算法的冗余嵌套。将该方法应用于预应力锚索加固边坡算例中,并将抗震全局极限响应面与基于"均值最不利滑动面"的极限响应面进行了对比,结果表明全局极限滑动面所得失稳概率较大,特定滑面的极限响应面法偏于不安全。进一步分析了锚索参数对边坡抗震失稳概率的影响以及失稳概率与可靠度的关系曲线,表明该方法很好地兼顾了变异参数空间的全局性以及计算的高效性,可以为基于可靠度的预应力锚索边坡抗震设计提供理论参考。 相似文献
3.
提出了一套基于随机响应面法的边坡系统可靠度分析方法。该方法首先从大量潜在滑动面中筛选出代表性滑动面。针对每条代表性滑动面,采用Hermite多项式展开建立其安全系数与土体参数间的非线性显式函数关系（即随机响应面）。然后,采用直接蒙特卡洛模拟计算边坡系统失效概率。在蒙特卡罗模拟中,采用所有代表性滑动面的随机响应面计算每一组样本所对应的边坡最小安全系数。最后,以两个典型多层边坡系统可靠度问题为例验证了该方法的有效性。结果表明：文中提出的边坡系统可靠度分析方法能够有效地识别边坡代表性滑动面,具有较高的计算精度和效率,并且确定代表性滑动面时无需计算滑动面间的相关系数。同时该方法可以有效地计算低失效概率水平的边坡系统可靠度,为含相关非正态参数的边坡系统可靠度问题提供了一条有效的分析途径。此外,多层边坡可能同时存在多条潜在滑动面,基于单一滑动面（如临界确定性滑动面）或者部分代表性滑动面进行边坡系统可靠度分析均会低估边坡失效概率。 相似文献
4.
5.
《岩土力学》2016,(1)
空间变异土坡可靠度问题应该视为系统可靠度问题,多重响应面法为高效、准确地对其进行求解提供了一条有效途径。针对单一滑面确定了合理的空间变异土坡安全系数的响应面形式,并探讨了可靠度分析精度和随机场离散精度间的近似线性关系。建立基于大量潜在滑面的多重响应面,计算系统失效概率,并识别其中的代表性滑面。通过两个土坡算例验证所提方法的有效性。结果表明:随着空间变异性的增强,土坡可靠度的系统性增强,单一滑面的失效概率将显著低估土坡整体失效概率;通过控制随机场离散精度,可以事先保证一定的可靠度分析精度,从而有效地避免离散出过多并不重要的随机变量;合理地选择多重响应面形式有利于进一步提高计算效率和计算精度;多重响应面法可以同时分析所有潜在滑面的失效概率以及系统失效概率,并识别出代表性滑面,为边坡防治提供参考。 相似文献
6.
7.
针对基坑工程中岩土参数存在随机性和变异性的特点,基于响应面重构法、遗传算法和禁忌搜索方法研究了土钉墙边坡可靠性分析方法。考虑土钉的加固作用,建立了适用于土钉墙边坡任意形状滑面安全系数计算的改进Morgenstern-Price法。基于响应面原理,将改进Morgenstern-Price法取代传统响应面法中的有限单元法来随机抽样构造响应面函数,建立了一种近似的土钉墙边坡可靠度计算方法。以土体的抗剪强度指标 、 为随机变量,提出了一种能同时确定土钉墙边坡最小可靠度指标 及相应最危险滑面的全局优化计算方法--土钉墙可靠性分析自适应禁忌搜索遗传算法（ATSGA）。结合算例,分别以土钉墙边坡的最小可靠度指标和最小中值安全系数为目标函数,采用ATSGA法搜索其相应的最危险滑动面,结果表明,二者相差较大。 相似文献
8.
多层土坡在岩土工程实际中十分常见,不仅土体参数存在一定的空间变异性,而且土体框架呈现明显的层状分布特征,然而目前对考虑土体参数空间变异性的多层土坡稳定可靠度研究的远远不够。提出了基于多重响应面边坡系统可靠度分析的蒙特卡洛模拟（MCS）方法,给出了计算流程图,系统地研究了考虑土体参数空间变异性的多层土坡系统可靠度问题。结果表明,提出方法能够有效地分析考虑参数空间变异性低失效概率水平的多层土坡系统可靠度问题,并且具有较高的参数敏感性分析计算效率。 相似文献
9.
考虑参数空间变异性的非饱和土坡可靠度分析 总被引：2，自引：0，他引：2
在考虑多个土体参数空间变异性的基础上,提出了基于拉丁超立方抽样的非饱和土坡稳定可靠度分析的非侵入式随机有限元法。利用Hermite随机多项式展开拟合边坡安全系数与输入参数间的隐式函数关系,采用拉丁超立方抽样技术产生输入参数样本点,通过Karhunen-Loève展开方法离散土体渗透系数、有效黏聚力和内摩擦角随机场,并编写了计算程序NISFEM-KL-LHS。研究了该方法在稳定渗流条件下非饱和土坡可靠度分析中的应用。结果表明：非侵入式随机有限元法为考虑多个土体参数空间变异性的非饱和土坡可靠度问题提供了一种有效的分析工具。土体渗透系数空间变异性和坡面降雨强度对边坡地下水位和最危险滑动面位置均有明显的影响。当降雨强度与饱和渗透系数的比值大于0.01时,边坡失效概率急剧增加。当土体参数变异性或者参数间负相关性较大时,忽略土体参数空间变异性会明显高估边坡失效概率。 相似文献
10.
在有限数据条件下,可靠度敏感性分析是研究各种不确定性因素对边坡失稳概率影响规律的重要途径。基于直接蒙特卡洛模拟和概率密度加权分析方法提出了一种高效边坡稳定可靠度敏感性分析方法。所提出的方法通过随机场表征岩土体参数的空间变异性,并采用局部平均理论建立岩土体参数的缩维概率密度函数,用于概率密度加权分析中高效、准确地计算不同敏感性分析方案对应的边坡失稳概率。最后,通过一个工程案例--詹姆斯湾堤坝说明了所提出方法的有效性和准确性。结果表明：在敏感性分析过程中,所提出的方法只需要执行一次直接蒙特卡洛模拟,避免了针对不同敏感性分析方案重新产生随机样本和执行边坡稳定分析,节约了大量的计算时间和计算资源,显著提高了基于蒙特卡洛模拟的敏感性分析计算效率;在概率密度加权分析中采用岩土体参数的缩维概率密度函数能够准确地计算边坡失稳概率,避免了有偏估计,使概率密度加权分析方法适用于考虑空间变异性条件下的边坡稳定可靠度敏感性分析问题。 相似文献
11.
Probabilistic analysis of underground rock excavations using response surface method and SORM 总被引：6，自引：0，他引：6
Probabilistic analysis of underground rock excavations is performed using response surface method and SORM, in which the quadratic polynomial with cross terms is used to approximate the implicit limit state surface at the design point. The response surface is found using an iterative algorithm and the probability of failure is evaluated using the first-order and the second-order reliability method (FORM/SORM). Independent standard normal variables in U-space are chosen as basic random variables and transformed into correlated non-normal variables in the original space of random variables for constructing the response surface. The proposed method is first illustrated for a circular tunnel with analytical solutions considering Mohr–Coulomb (M–C) and Hoek–Brown (H–B) yield criteria separately. The failure probability with respect to the plastic zone criterion and the tunnel convergence criterion are estimated from FORM/SORM and compared to those obtained from Monte Carlo Simulations. The results show that the support pressure has great influence on the failure probability of the two failure modes. For the M–C model, the hypothesis of uncorrelated friction angle and cohesion will generate higher non-performance probability in comparison to the case of negatively correlated shear strength parameters. Reliability analyses involving non-normal distributions are also investigated. Finally, an example of a horseshoe-shaped highway tunnel is presented to illustrate the feasibility and validity of the proposed method for practical applications where numerical procedures are needed to calculate the performance function values. 相似文献
12.
A practical approach is proposed in this paper for the reliability assessment of rock tunnel excavations using the moving least squares method (MLSM) and the uniform design. The failure probability is computed by the first-order and the second-order reliability method (FORM/SORM), which is based on the generated MLSM response surface (MLSM-RS) via an iterative algorithm. The proposed approach is first implemented in the analysis of a circular tunnel that consists of three limit state functions to illustrate the efficiency and accuracy of the approach. Then, the method is applied to a non-circular tunnel to demonstrate the feasibility and validity of the method for practical problems, in which numerical procedures are commonly employed to solve the implicit limit state functions. 相似文献
13.
The first order reliability method (FORM) is efficient, but it has limited accuracy; the second order reliability method (SORM) provides greater accuracy, but with additional computational effort. In this study, a new method which integrates two quasi-Newton approximation algorithms is proposed to efficiently estimate the second order reliability of geotechnical problems with reasonable accuracy. In particular, the Hasofer–Lind–Rackwitz–Fiessler–Broyden–Fletcher–Goldfarb–Shanno (HLRF–BFGS) algorithm is applied to identify the design point on the limit state function (LSF), and consequently to compute the first order reliability index; whereas the Symmetric Rank-one (SR1) algorithm is nested within the HLRF–BFGS algorithm to compute good approximations, yet with a reduced computational effort, of the Hessian matrix required to compute second order reliabilities. Three typical geotechnical problems are employed to demonstrate the ability of the suggested procedure, and advantages of the proposed approach with respect to conventional alternatives are discussed. Results show that the proposed method is able to achieve the accuracy of conventional SORM, but with a reduced computational cost that is equal to the computational cost of HLRF–BFGS-based FORM. 相似文献
14.
《地学前缘(英文版)》2018,9(6):1631-1638
To meet the high demand for reliability based design of slopes, we present in this paper a simplified HLRF(Hasofere Linde Rackwitze Fiessler) iterative algorithm for first-order reliability method(FORM). It is simply formulated in x-space and requires neither transformation of correlated random variables nor optimization tools. The solution can be easily improved by iteratively adjusting the step length. The algorithm is particularly useful to practicing engineers for geotechnical reliability analysis where standalone(deterministic) numerical packages are used. Based on the proposed algorithm and through direct perturbation analysis of random variables, we conducted a case study of earth slope reliability with complete consideration of soil uncertainty and spatial variability. 相似文献
15.
Reliability-based design (RBD) can play a useful complementary role to overcome some limitations in the Eurocode 7 (EC7) design approach, for example in situations with parameters not covered in EC7, different parametric sensitivities across different problems, cross-correlated or spatially correlated parameters, design aiming at a target reliability or failure probability, or when uncertainty in unit weight of soil is modeled. The complementary role played by RBD under these circumstances is illustrated and discussed for a shallow foundation, a reinforced rock slope, a Norwegian clay slope with spatial variability, a laterally loaded pile requiring implicit numerical analysis, and an anchored sheet pile wall. A pragmatic RBD approach involving first-order reliability method (FORM) only and a more rigorous RBD approach involving both first-order and second-order reliability method (SORM) are offered. Both approaches are implementable using either spreadsheet-based FORM and SORM procedures, or using various commercially available FORM/SORM packages. 相似文献
16.
A practical and efficient approach of implementing second‐order reliability method (SORM) is presented and illustrated for cases related to foundation engineering involving explicit and implicit limit state functions. The proposed SORM procedure is based on an approximating paraboloid fitted to the limit state surface in the neighborhood of the design point and can be easily carried out in a spreadsheet. Complex mathematical operations are relegated to relatively simple user‐created functions. The failure probability is calculated automatically based on the reliability index and principal curvatures of the limit state surface using established closed‐form SORM formulas. Four common foundation engineering examples are analyzed using the proposed method and discussed: immediate settlement of a flexible rectangular foundation, bearing capacity of a shallow footing, axial capacity of a vertical single pile, and deflection of a pile under lateral load. Comparisons with Monte Carlo simulations are made. In the case of the laterally loaded pile, the friction angle of the soil is represented as a one‐dimensional random field, and pile deflections are computed based on finite element analysis on a stand‐alone computer package. The implicit limit state function is approximated via the response surface method using two quadratic models. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
17.
This paper proposes a stochastic response surface method for reliability analysis involving correlated non-normal random variables, in which the Nataf transformation is adopted to effectively transform the correlated non-normal variables into independent standard normal variables. Transformations of random variables that are often used in reliability analyses in terms of standard normal variables are summarized. The closed-form expressions for fourth to sixth order Hermite polynomial chaos expansions involving any number of random variables are formulated. The proposed method will substantially extend the application of stochastic response surface method for reliability problems. An example of reliability analysis of rock slope stability with plane failure is presented to demonstrate the validity and capability of the proposed stochastic response surface method. The results indicate that the proposed stochastic response surface method can evaluate the reliability of rock slope stability involving correlated non-normal variables accurately and efficiently. Its accuracy is shown to be higher than that for the first-order reliability method, and it is much more efficient than direct Monte-Carlo simulation. The results also show that the number of collocation points selected should ensure that the Hermite polynomial matrix has a full rank so that different order SRSMs can produce a robust estimation of probability of failure for a specified performance function. Generally, the accuracy of SRSM increases as the order of SRSM increases. 相似文献
18.
This paper presents a practical procedure for assessing the system reliability of a rock tunnel. Three failure modes, namely, inadequate support capacity, excessive tunnel convergence, and insufficient rockbolt length, are considered and investigated using a deterministic model of ground-support interaction analysis based on the convergence–confinement method (CCM). The failure probability of each failure mode is evaluated from the first-order reliability method (FORM) and the response surface method (RSM) via an iterative procedure. The system failure probability bounds are estimated using the bimodal bounds approach suggested by Ditlevsen (1979), based on the reliability index and design point inferred from the FORM. The proposed approach is illustrated with an example of a circular rock tunnel. The computed system failure probability bounds compare favorably with those generated from Monte Carlo simulations. The results show that the relative importance of different failure modes to the system reliability of the tunnel mainly depends on the timing of support installation relative to the advancing tunnel face. It is also shown that reliability indices based on the second-order reliability method (SORM) can be used to achieve more accurate bounds on the system failure probability for nonlinear limit state surfaces. The system reliability-based design for shotcrete thickness is also demonstrated. 相似文献
19.
Although first-order reliability method is a common procedure for estimating failure probability, the formulas derived for bimodal bounds of system failure probability have not been widely used as expected in present reliability analyses. The reluctance for applying these formulas in practice may be partly due to the impression that the procedures to implement the system reliability theory are tedious. Among the methods for system reliability analysis, the approach suggested in Ditlevsen 1979 is considered here because it is a natural extension of the first-order reliability method commonly used for failure probability estimation corresponding to a single failure mode, and it can often provide reasonably narrow failure probability bounds. To facilitate wider practical application, this paper provides a short program code in the ubiquitous Excel spreadsheet platform for efficiently calculating the bounds for system failure probability. The procedure is illustrated for a semi-gravity retaining wall with two failure modes, a soil slope with two and eight failure modes, and a loaded beam with three failure modes. In addition, simple equations are provided to relate the correlated but unrotated equivalent standard normals of the Low and Tang 2007 FORM procedure with the uncorrelated but rotated equivalent standard normals of the classical FORM procedure. Also demonstrated are the need for investigating different permutations of failure modes in order to get the narrowest bounds for system failure probability, and the use of SORM reliability index for system reliability bounds in a case where the curvature of the limit state surface cannot be neglected. 相似文献