共查询到20条相似文献，搜索用时 46 毫秒
1.
Razieh Moradi Aminaton Marto Ahmad Safuan A. Rashid Mohammad Moeen Moradi Abideen Adekunle Ganiyu Suksun Horpibulsuk 《Environmental Earth Sciences》2018,77(3):100
Granular column technique is a soil improvement method used to increase the bearing capacity of a soft soil area by replacing the soil with a group of granular column materials. The by-product utilisation is a worldwide interest for sustainable infrastructure development. Bottom ash, which is a combustion deposit derived from coal burning, is a potential by-product that could be used alternatively to sand or aggregate as a green granular column material. This research is to study the potential use of the bottom ash column-improved soft clay by conducting a series of small-scale physical modelling test. The bearing capacity behaviour and failure mode of soft clay improved with end-bearing group of bottom ash columns with and without geotextile encasement are investigated. The bearing capacity of soft clay is significantly enhanced by the inclusion of bottom ash columns; that is, 239% of bearing capacity improvement is observed with only 13% of improvement area. The bulging of the bottom ash column is transferred to buckling failure with higher bearing capacity when the bottom ash column is encased by geotextile. The outcome of this research leads to the usage of bottom ash by-product as a granular column material in sustainable soil improvement technique. 相似文献
2.
《Geomechanics and Geoengineering》2013,8(3):185-194
In this paper, a model for the analysis of footings having finite flexural rigidity resting on a granular bed on top of stone columns improved saturated soft (clayey) soil has been proposed. Soft soil has been modeled as a Kelvin–Voigt body to represent its time dependent behavior. Pasternak shear layer has been used to represent the granular layer and the stone columns have been idealized by means of nonlinear Winkler springs. Nonlinear behavior of granular fill, soft soil and stone columns has been invoked by means of hyperbolic constitutive relationships. Governing differential equations for the soil–foundation system have been obtained and finite difference method has been adopted for solving these, using the Gauss-elimination iterative scheme. Detailed parametric study for a combined footing has been carried out to study the influence of parameters, like magnitude of applied load, flexural rigidity of footing, diameter of stone column, spacing of stone column, ultimate bearing capacity of granular fill, poor foundation soil and stone column, relative stiffness of stone columns and degree of consolidation, on flexural response of the footing. 相似文献
3.
A three-dimensional elastoplastic soil constitutive model capable of capturing the response of granular soils under low-frequency cyclic loading is introduced and verified. The model is piecewise linear with a hyperbolic stress-strain relationship. The size of the hysteresis loop is controlled using different scaling factors with a shift in the backbone curve at load reversal. The model introduces a new algorithm to better capture the soil’s response upon reloading for plane strain. Model verification with experimental results at different scales shows that the model has good capabilities in capturing the response of granular soils under low frequency cyclic loading. 相似文献
4.
Kousik Deb 《国际地质力学数值与分析法杂志》2008,32(10):1267-1288
The present study pertains to the development of a mechanical model for predicting the behavior of granular bed‐stone column‐reinforced soft ground. The granular layer that has been placed over the stone column‐reinforced soft soil has been idealized by the Pasternak shear layer. The saturated soft soil has been idealized by the Kelvin–Voigt model to represent its time‐dependent behavior and the stone columns are idealized by stiffer Winkler springs. The nonlinear behavior of the granular fill has been incorporated in this study by assuming a hyperbolic variation of shear stress with shear strain as in one reported literature. Similarly, for soft soil it has also been assumed that load‐settlement variation is hyperbolic in nature. The effect of consolidation of the soft soil due to inclusion of the stone columns has also been included in the model. Plane‐strain conditions are considered for the loading and foundation soil system. The numerical solutions are obtained by a finite difference scheme and the results are presented in a non‐dimensional form. Parametric studies for a uniformly loaded strip footing have been carried out to show the effects of various parameters on the total as well as differential settlement and stress concentration ratio. It has been observed that the presence of granular bed on the top of the stone columns helps to transfer stress from soil to stone columns and reduces maximum as well as differential settlement. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
5.
Large deformation soil behavior underpins the operation and performance for a wide range of key geotechnical structures and needs to be properly considered in their modeling, analysis, and design. The material point method (MPM) has gained increasing popularity recently over conventional numerical methods such as finite element method (FEM) in tackling large deformation problems. In this study, we present a novel hierarchical coupling scheme to integrate MPM with discrete element method (DEM) for multiscale modeling of large deformation in geomechanics. The MPM is employed to treat a typical boundary value problem that may experience large deformation, and the DEM is used to derive the nonlinear material response from small strain to finite strain required by MPM for each of its material points. The proposed coupling framework not only inherits the advantages of MPM in tackling large deformation engineering problems over the use of FEM (eg, no need for remeshing to avoid mesh distortion in FEM), but also helps avoid the need for complicated, phenomenological assumptions on constitutive material models for soil exhibiting high nonlinearity at finite strain. The proposed framework lends great convenience for us to relate rich grain-scale information and key micromechanical mechanisms to macroscopic observations of granular soils over all deformation levels, from initial small-strain stage en route to large deformation regime before failure. Several classic geomechanics examples are used to demonstrate the key features the new MPM/DEM framework can offer on large deformation simulations, including biaxial compression test, rigid footing, soil-pipe interaction, and soil column collapse. 相似文献
6.
为了研究包裹碎石桩的承载机制,开展了室内模型试验,对不同套筒长度和刚度的包裹碎石桩承载力、端阻力、变形和破坏情况等进行了分析。试验中利用自制的桩体径向变形测量仪监测了桩体的径向变形情况。试验结果表明：当桩体支承在坚硬土层时,全长包裹碎石桩有效提高碎石桩的承载力和刚度,且采用弹性模量较大的土工材料套筒,包裹碎石桩的极限承载力和刚度也较大,部分包裹碎石桩（包裹长度为0.6倍桩长）相对于碎石桩优势不明显。这是因为部分包裹碎石桩和全长包裹的承载特性、变形特点和破坏模式均存在差异。全长包裹碎石桩传递至桩底端的荷载大于部分包裹碎石桩和碎石桩的。与部分包裹碎石桩和碎石桩比较,全长包裹碎石桩桩身变形分布较为均匀,同一应力作用下,桩身最大径向变形量较小。此外,全长包裹碎石桩刺入顶部褥垫层发生破坏,而部分包裹碎石桩发生鼓胀破坏。 相似文献
7.
Seismic response analysis of geosynthetic reinforced soil segmental retaining walls by finite element method 总被引：3，自引：0，他引：3
The paper presents the results of a finite element analysis of the dynamic response of a geosynthetic reinforced soil retaining wall that is constructed with dry-stacked modular concrete blocks as the facia system. In the finite element model, the cyclic shear behavior of the backfill soil is described by a hyperbolic stress-strain relationship with Masing hysteretic unload-reload behavior. The reinforcement material is modelled using a similar hysteretic model which takes into account the measured response of cyclic load-extension tests performed on unconfined geogrid specimens in the laboratory. Interface shear between wall components is simulated using slip elements. The results of finite element analyses giving the seismic response of a typical geogrid reinforced segmental retaining wall subjected to prescribed acceleration records are presented. The results of analyses highlight the influence of dynamic loading on: (1) wall displacement; (2) cumulative interface shear force and displacement between facing units; (3) tensile forces developed in the reinforcement and; (4) acceleration response over the height of the wall. A number of implications to the design of these structures are identified based on the results of these simulations. 相似文献
8.
土的结构性是决定土的力学特性的一个最根本的因素,正是由于土的结构性的存在,连续体力学理论用于岩土材料存在明显不足,沈珠江将土体结构性的研究提到“21世纪土力学的核心问题”的高度,但由于土的结构性的复杂性,缺乏测试方法,还没有找到土结构性的定量指标。选择结构特征相对简单的粗粒土作为研究对象,探索建立其力学体系的方法和途径。粗粒土的结构性（称之为组构）主要体现在颗粒的排列特征方面,采用CT测试技术和DDA数值分析方法初步解决了粗粒土组构的量化问题,对粗粒土多种受力过程进行了CT三轴试验和数值模拟,取得了粗粒土的组构信息及其变化,为构成合理的组构量、研究粗粒土组构量与宏观力学响应之间的相互关系、探讨粗粒土的变形机理和力学特征奠定了基础,并侧重介绍粗粒土CT三轴试验成果,展示三轴试验过程中颗粒运动规律。 相似文献
9.
It is acknowledged that for extending the experimental results to real scale design, it is necessary to use an appropriate numerical analysis. The good analysis in geotechnical problems needs to adopt a suitable constitutive model for the materials. This paper presents a modeling approach to investigate the complex behavior of granular trench and reinforcement system. For this purpose, an experimental and numerical investigation has been carried out on the behavior of pullout resistance of an embedded anchor (circular plate) with and without geogrid reinforcement layers in stabilized loose and dense sand using a granular trench. Different parameters have been considered, such as number of geogrid layers, embedment ratios, relative density of soil, and height ratios of granular trench. Finite element analysis with Hardening Soil Model was utilized for sand and CANAsand constitutive model was used for granular trench to investigate failure mechanism and the associated rupture surfaces. Results showed that, when soil was improved with the granular-geogrid trench, the uplift force significantly increased, but in geogrid-reinforced granular trench condition, the ultimate pullout resistance at failure increased as the number of geogrid layers increased up to the third layer, the fifth layer had a negligible effect in comparison with the third layer of reinforcement. The ultimate uplift capacity of anchor plate and the variation of surface deformation for all the tests indicated a close agreement between the experimental and numerical models. 相似文献
10.
Response of multilayer geosynthetic-reinforced bed resting on soft soil with stone columns 总被引：2，自引：0，他引：2
In the present study, a mechanical model has been developed to study the behavior of multilayer geosynthetic-reinforced granular fill over stone column-reinforced soft soil. The granular fill and geosynthetic reinforcement layers have been idealized by Pasternak shear layer and rough elastic membranes, respectively. The Kelvin–Voight model has been used to represent the time-dependent behavior of saturated soft soil. The stone columns are idealized by stiffer springs and assumed to be linearly elastic. The nonlinear behavior of the soft soil and granular fill is considered. The effect of consolidation of soft soil due to inclusion of the stone columns on settlement response has also been included in the model. Plane strain conditions are considered for the loading and reinforced foundation soil system. An iterative finite difference scheme is applied for obtaining the solution and results are presented in nondimensional form. It has been observed that if the soft soil is improved with stone columns, the multilayer reinforcement system is less effective as compared to single layer reinforcement to reduce the total settlement as there is considerable reduction in the total settlement due to stone column itself. Multilayer reinforcement system is effective for reducing the total settlement when stone columns are not used. However, multilayer reinforcement system is effective to transfer the stress from soil to stone column. The differential settlement is also slightly reduced due to application of multiple geosynthetic layers as compared to the single layer reinforcement system. 相似文献
11.
The paper presents a model for the analysis of granular foundation beds reinforced with several geosynthetic layers. Such
reinforced granular beds are often placed on soft soil strata for an efficient and economical transfer of superstructure load.
The granular bed is modeled by the Pasternak shear layer and the geosynthetic reinforcement layers by stretched rough elastic
membranes. The soft soil is represented by a series of nonlinear springs. The reinforcement has been considered to be extensible
and it is assumed that the deformation at the interface of the reinforcements and soil are same. The nonlinear behavior of
the granular bed and the soft soil is considered. Plane strain conditions are considered for the loading and reinforced foundation
soil system. An iterative finite difference scheme is applied for obtaining the solution and results are presented in nondimensional
form. The results from the proposed model are compared to the results obtained for multilayer inextensible geosynthetic reinforcement
system. Significant reduction in the settlement has been observed when the number of reinforcement layer is increased. In
case of inextensible reinforcements as the number of reinforcement layer is increased the settlement is decreased with a decreasing
rate, but in case of extensible reinforcement the reduction rate is almost constant. Nonlinear behavior of the soft soil decreases
as number of reinforcement layer is increased. The effect of the stiffness of the geosynthetic layer on the settlement response
becomes insignificant for multilayer reinforced system, but the mobilized tension in the reinforcement layers increases as
the stiffness of the geosynthetic layers increases. 相似文献
12.
S. Tsotsos F. E. Karaoulanis T. Chatzigogos 《Geotechnical and Geological Engineering》2010,28(2):199-207
In this article, a new concept on the compressibility of mixed soils is proposed. Six characteristic structures of mixed soils
are recognized, defined and described based on the percentage of the ground material in the mixture. The compressibility mechanism
and the deformational behavior of each structure are extensively studied by both laboratory and numerical experiments. Two
series of compressibility tests are initially conducted in the laboratory, using artificial mixtures of sand and clay at different
ratios and subjected to typical compressibility tests using the oedometer apparatus. Then, a numerical approach is employed,
based on the finite element method and Monte-Carlo simulations, in order to reproduce the conditions of the laboratory tests
and to further study the compressibility of each characteristic structure. From the results obtained, it is concluded that
the deformational behavior of mixed soils depends strongly on the percentage of the ground in the mixture and on the mechanical
properties of the components of this mixture. Furthermore, it is shown that the estimated deformations and stress states can
be highly unrealistic when the mixed soil is not properly modelled and is assumed to be governed by the properties of its
weaker component. 相似文献
13.
While most research has mainly focused on the volume change, flow, and shear strength of unsaturated earth materials, investigations of tensile strength of unsaturated earth materials especially granular materials have not received much attention except for cemented and clayey materials. Thus, direct tension experiments were carried out to quantify the actual magnitude of tensile strength induced by water in moist granular soil at especially low water contents (w<4%). The magnitudes of the measured tensile strength are significantly different from zero. A simple experimental tensile strength model is proposed. Practicing engineers can use this model for approximate estimation of the tensile strength of unsaturated granular soils without experiments and for precise design or analysis of most engineered facilities relying on the unsaturated granular soils in the vadose zone. The experimental data are also compared with a theoretical model developed for monosized spheres at low water contents, and its application for a real granular earth material having a variety of particles is discussed. The nonlinear behavior of the tensile strength for moist granular soil is appropriately simulated with a model. 相似文献
14.
Simulation of large deformation and post‐failure of geomaterial in the framework of smoothed particle hydrodynamics (SPH) are presented in this study. The Drucker–Prager model with associated and non‐associated plastic flow rules is implemented into the SPH code to describe elastic–plastic soil behavior. In contrast to previous work on SPH for solids, where the hydrostatic pressure is often estimated from density by an equation of state, this study proposes to calculate the hydrostatic pressure of soil directly from constitutive models. Results obtained in this paper show that the original SPH method, which has been successfully applied to a vast range of problems, is unable to directly solve elastic–plastic flows of soil because of the so‐called SPH tensile instability. This numerical instability may result in unrealistic fracture and particles clustering in SPH simulation. For non‐cohesive soil, the instability is not serious and can be completely removed by using a tension cracking treatment from soil constitutive model and thereby give realistic soil behavior. However, the serious tensile instability that is found in SPH application for cohesive soil requires a special treatment to overcome this problem. In this paper, an artificial stress method is applied to remove the SPH numerical instability in cohesive soil. A number of numerical tests are carried out to check the capability of SPH in the current application. Numerical results are then compared with experimental and finite element method solutions. The good agreement obtained from these comparisons suggests that SPH can be extended to general geotechnical problems. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
15.
Stone columns in soft soil improve bearing capacity because they are stiffer than the material which they replace, and compacted stone columns produce shearing resistances which provide vertical support for overlying structures or embankments. Also stone columns accelerate the consolidation in the native surrounding soil and improve the load settlement characteristics of foundation. In this paper, the finite element method is utilized as a tool for carrying out analyses of stone column–soil systems under different conditions. A trial is made to improve the behaviour of stone column by encasing the stone column with geogrid as reinforcement material. The program CRISP-2D is used in the analysis of problems. The program allows prediction to be made of soil deformations considering Mohr-Coulomb failure criterion for elastic–plastic soil behaviour. A parametric study is carried out to investigate the behaviour of standard and encased floating stone columns in different conditions. Different parameters were studied to show their effect on the bearing improvement and settlement reduction of the stone column. These include the length to diameter ratio (L/d), shear strength of the surrounding soil and, the area replacement ratio (as) and others. It was found that the maximum effective length to diameter (L/d) ratio is between (7–8) for Cu, between (20–40) kPa and between (10–11) for Cu?=?10?kPa for ordinary floating stone columns while the effective (L/d) ratio is between (7–8) for encased floating stone columns. The increase in the area replacement ratio increases the bearing improvement ratio for encased floating stone columns especially when the area replacement ratio is greater than (0.25). The geogrid encasement of stone column greatly decreases the lateral displacement compared with ordinary stone column. 相似文献
16.
The cyclic behavior of soil–structure interface can be very important in dynamic problems. The cyclic behavior of soil–structure interface may be nonlinear, which includes hysteresis, hardening, degradation, and particle breakage. The breakage of granular soil particles during shearing of granular soil–structure interface is associated with cyclic degradation and can be critical to the dynamic behavior of soil–structure system. The critical state soil mechanics concept formerly used to simulate the nonlinear monotonic behavior of granular soil–structure interface was modified and extended to describe the cyclic behavior, especially soil‐particle breakage and degradation during cyclic shearing. Soil‐particle breakage was assumed to relate to the energy consumption during cyclic shearing and the critical state line of the soil–structure interface was assumed to translate with the consumption of shearing energy during cyclic shearing as the threshold value is attained. The model was formulated in the framework of generalized plasticity and is capable of describing the salient features of granular soil–structure interface under cyclic loading. Most of the model parameters have straightforward physical meanings and are calibrated using monotonic or cyclic interface test results. The proposed model was calibrated and validated against published test results. The dependency of interface behavior on stress path and cyclic degradation can be successfully described by the proposed model. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
17.
In this paper, an existing elastoplastic constitutive model, originally developed for granular soils, is adapted to describe the stress–strain behaviour of cemented granular soils. The existing model (CJS), due to its modular formulation, can be easily developed to take into account different supplementary behavioural aspects in soil mechanics. In the present study, the failure mechanism of the CJS model is modified by introducing the essential aspects in the behaviour of cemented granular soils in its formulation. All of the model parameters have clear physical meaning and can be identified using classical laboratory tests. A set of direct relations between model parameters and famous mechanical parameters of soils such as internal friction angle and cohesion at peak and residual states is presented. In order to validate the model, the results of triaxial and uniaxial tests in the compression and extension performed on cemented granular materials are used. The validation results indicate the good capability of the proposed model. 相似文献
18.
19.
由地下水引起的静力液化可能是边坡失稳的隐含机制之一,松砂在不排水剪切条件下可能发生静力液化,密实的颗粒集合体在特定的应变路径下也会出现相似的现象,即试样整体发生急剧的失稳,应力状态尚处于峰值强度线以内。该种失稳模式称为分散性失稳,是为了强调失稳模式中没有出现应变局部化或者剪切带。采用连续-离散耦合分析方法,研究由不规则形状颗粒组成的密实集合体在等比例应变加载路径下的力学特性。根据Hill的材料失稳理论,当试样的应力增量 和应变增量 对应的2阶功 为负时,试样即发生不可逆的整体失稳破坏。以根据不同等比例应变路径得到 曲线为界,在 平面内将试样的应力状态分为剪缩区、剪胀-稳定区和剪胀-非稳定区,连接不同围压下试样发生分散性失稳时的应力状态形成失稳线发现,峰值强度线高于临界状态线,临界状态线高于失稳线。 相似文献
20.
粗颗粒土的应力应变特性及其数学描述研究 总被引：22，自引：3，他引：19
大型三轴试验研究了粗颗粒土的应力应变特性及邓肯-张模型的适用性。试验结果表明粗颗粒土表现出明显的低围压下体胀高围压下体缩的体变性质,邓肯-张模型在描述粗颗粒土的体变特性方面存在不足。基于试验结果提出了新的体变描述公式,在未增加模型参数的条件下提出了邓肯-张模型的改进模型。采用改进模型对多种粗颗粒土三轴试验结果进行了预测,结果初步表明改进模型能够更好地模拟粗粒土的体变特性。 相似文献