共查询到20条相似文献，搜索用时 31 毫秒
1.
Dynamic Analysis of Underground Openings 总被引：2，自引：1，他引：2
Summary Stability analysis of the underground openings under earthquake induced dynamic loads has been carried out for the four underground openings, which exist at Koyna H.E Project, Koyna, India. Vertical and horizontal displacements, maximum compressive and tensile stresses occurring in the vicinity of these openings have been computed and are compared vis-à-vis the values obtained from the static analysis. A reasonably good agreement between the results has been noted. The minimum major principal stresses (tensile), which exist only in the vicinity of the underground openings, when static analysis is conducted are noted to spread over the entire rock mass when dynamic analysis is performed. The study presents a methodology, which can be used for checking the stability of the underground openings, under seismic loading conditions. 相似文献
2.
总结了在不同高温状态下冷却、不同加载速率及随机裂隙发育状态下花岗岩动态抗拉力学特性的变化规律;结合牙轮钻头孔底碎岩过程,分析了动静载荷耦合作用下岩石破碎的载荷一侵深特性曲线,认为动、静载荷耦合作用的加载点（即动载的施加点）应是在静载处于卸载阶段;并根据加载能量大小讨论了不同动静耦合工况下产生的岩石破裂深度及破碎体积,表明通过一定范围内增大静载荷及冲击力、预加静压对岩石进行预应力损伤、加载一卸载一加载的破碎循环模式,有利于高效碎岩及裂纹的发育。嵌岩桩基础工程实践表明,通过改造牙轮钻头等钻具结构形式及布齿方式,利用动静耦合加载方式及对钻头冷却处理,可实现牙轮钻头在微风化花岗岩高效钻进的目的,为牙轮钻头的旋挖钻进成桩应用提供了重要的技术支撑。 相似文献
3.
动载作用下岩石的破坏规律研究对于众多地质灾害的机制分析和预防具有重要的理论及实际意义。鉴于数值模拟研究的优势,应大力发展适于岩石动力断裂过程模拟的数值方法。在自主开发的拉格朗日元与离散元耦合连续−非连续方法的基础上,采用朱−王−唐本构模型取代了广义胡克定律,发展了考虑动力本构的连续−非连续方法,其正确性通过模拟不同加载速度时砂岩试样的单轴压缩试验进行了验证。通过统计裂缝区段数目随着岩样的纵向应变的演化规律,并监测岩样左、右对称线上多个测点的最小主应力的演化规律,开展了不同加载速度时单轴压缩花岗岩试样的变形−开裂过程研究,阐明了岩样的开裂机制。研究发现,剪裂缝以雁列式展布,整体上形成剪切带。随着时步数目的增加,各测点的最小主应力均呈波动下降−震荡上升的变化趋势。震荡上升阶段对应岩样的应变软化阶段。测点分离后最小主应力的震荡幅度较大,这是由于节点分离和单元接触激发了较大的应力波。剪切带尖端的最小主应力集中会使测点发生剪切分离。当岩样的三角块向下楔入时,下方测点的应力状态类似于紧凑拉伸试验进而发生拉伸分离。 相似文献
4.
Some Fundamental Issues in Dynamic Compression and Tension Tests of Rocks Using Split Hopkinson Pressure Bar 总被引：12，自引：7，他引：5
Feng Dai Sheng Huang Kaiwen Xia Zhuoying Tan 《Rock Mechanics and Rock Engineering》2010,43(6):657-666
Accurate characterizations of rock strengths under higher loading rates are crucial in many rock engineering applications. The split Hopkinson pressure bar (SHPB) system has been used to quantify the dynamic compressive strength of rocks using the short cylindrical specimen and the dynamic tensile strength of rocks using the Brazilian disc (BD) specimen. However, SHPB is a standard tool that is suitable for metal testing; there are some fundamental issues that need to be carefully visited in applying SHPB to rock dynamic tests. This paper addresses several such critical issues, including the choice of slenderness ratio of the compressive specimen, the effect of friction between the sample and bars on the measured results of compressive strength, the necessity of dynamic force balance on the dynamic BD test, and the validity of using the standard BD equation in the data reduction. We show that with proper experimental designs that address these issues, the dynamic compressive strength and dynamic tensile strength of rocks measured using SHPB are valid and reliable. 相似文献
5.
采用动态焦散线试验和ABAQUS数值分析方法,对条形药包爆破载荷作用下不同角度预制贯通裂纹的扩展行为进行了研究。研究结果表明：在爆炸应力波的作用下,柱部区域和端部区域0°预制贯通裂纹远端翼裂纹背离炮孔方向扩展,而近端翼裂纹朝向炮孔扩展。预制贯通裂纹远端的应力集中程度较近端高,并且远端翼裂纹的止裂韧度更低,翼裂纹更易扩展。在爆炸应力波的作用下,柱部区域90°预制贯通裂纹由张开逐渐转为闭合,爆炸应力波在已闭合的预制贯通裂纹面发生透射,并在预制贯通裂纹尖端产生压剪应力集中,形成以II型断裂为主的I-II复合型裂纹,并近似垂直于预制贯通裂纹面扩展,随后,在自由面反射应力波的作用下,反翼裂纹沿预制贯通裂纹面起裂扩展;炮孔端部区域90°预制贯通裂纹处翼裂纹的起裂是由于爆炸应力波在预制贯通裂纹处产生反射拉伸波的结果,促使预制贯通裂纹端部产生拉应力集中,形成近似I型裂纹,随后,翼裂纹逐渐转向爆炸应力波传播方向扩展。 相似文献
6.
Yu Haizhen Zhao Wenguang Wang Ren Li Jianguo He Yang 《中国地质大学学报(英文版)》2005,16(4):340-344
INTRODUCTION Theexploitationofoffshorenaturalresourcesin thetropichaspresentedgeotechnicalengineerswith theproblemofdealingwithinsitucarbonatesedi mentsinharshconditionsforwhichfewengineering dataareavailable.Thecarbonatesedimentsaresub jectedtolargestaticstressesduetotheweightof foundationstructuresaswellascyclicstressesdueto waveaction,andinsomecases,earthquakeloading.Ithasbeenprovedthatthenatureofcyclicstresschangesoccurringintheseabeddepositduetowave loadinginvolvesacontinuousrotationo… 相似文献
7.
A numerical study of the influence from pre‐existing cracks on granite rock fragmentation at percussive drilling 
下载免费PDF全文
下载免费PDF全文 Mahdi Saadati Pascal Forquin Kenneth Weddfelt Per‐Lennart Larsson Francois Hild 《国际地质力学数值与分析法杂志》2015,39(5):558-570
The aim of this study is to investigate the effect of pre‐existing, or structural, cracks on dynamic fragmentation of granite. Because of the complex behavior of rock materials, a continuum approach is employed relying upon a plasticity model with yield surface locus as a quadratic function of the mean pressure in the principal stress space coupled with an anisotropic damage model. In particular, Bohus granite rock is investigated, and the material parameters are chosen based on previous experiments. The equation of motion is discretized using a finite element approach, and the explicit time integration method is employed. The pre‐existing cracks are introduced in the model by considering sets of elements with negligible tensile strength that leads to their immediate failure when loaded in tension even though they still carry compressive loads as crack closure occurs because of compressive stresses. Previously performed edge‐on impact tests are reconsidered here to validate the numerical model. Percussive drilling is simulated, and the influence of the presence of pre‐existing cracks is studied. The results from the analysis with different crack lengths and orientations are compared in terms of penetration stiffness and fracture pattern. It is shown that pre‐existing cracks in all investigated cases facilitate the drilling process. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
8.
基于改进的分离式霍普金森压杆（SHPB）岩石动静组合加载试验系统,进行了在不同静力轴压条件下受频繁动力扰动作用的动力学试验,研究蛇纹岩在高静载下受频繁冲击扰动过程中的动态变形特性、动态峰值应力和应变、能量变化规律和岩石破坏模式等动力学特性。研究结果表明：高静载条件下受频繁冲击扰动作用时,在动态峰值应力前,动态应力与应变呈正相关关系,而在动态峰值应力后,出现变形回弹和不回弹两种现象;随着动力扰动次数的增加,岩石动态峰值应力减小、动态峰值应变增大、动态变形模量减小、岩石由释放能量向吸收能量方向转化;随着预加静力轴压的增大,单次冲击过程中岩石损伤加剧,岩石破坏需要的扰动冲击次数减少,同时岩石由拉伸破坏模式向压剪破坏模式转变,破坏块度由小变大、均匀度降低。试验结果对揭示深部岩体承受高地应力和频繁开挖爆破等动力扰动作用下的破坏机制具有重要意义,同时为工程实际中通过调整围岩静应力状态和爆破以提高围岩长期稳定性的可行性提供了室内试验支持。 相似文献
9.
以凌海花岗岩为研究对象,进行了一系列常规三轴高压试验,研究了花岗岩的变形特点及脆性演化规律。基于试验结果,分析了不同围压下的全应力-应变曲线,探讨了静态应变采集试验中花岗岩表面变形特点、峰前损伤规律及其与裂隙扩展的关系,总结了动态采集试验中典型的裂纹扩展模式,并基于改进的峰后能量平衡法评价岩石的脆性。研究结果表明：多应变片静态采集三轴试验中岩样不同位置变形规律差异明显,压缩应变较大的区域往往是裂隙产生、扩展的位置;动态应变采集三轴试验中识别了3种典型的裂隙扩展模式,且与应力加载方式存在一定联系;在70 MPa围压范围内,岩样都表现出明显的脆性破坏特征,其脆性指数随围压增加呈现出先减小后增加再减小的变化趋势。该研究成果对进一步开展其他硬岩的变形破坏机制研究和地下工程的稳定性分析具有一定参考价值。 相似文献
10.
Analytical simulation of the dynamic compressive strength of a granite using the sliding crack model
A sliding crack model is employed to simulate rock strength under dynamic compression. It is assumed that the growth and nucleation of a sliding crack array presented results in the shear fault failure and dominate the mechanical properties of rock material. The pseudo‐tractions method is used to calculate the stress intensity factor of the sliding crack array under compression. With the utilization of a dynamic crack growth criterion, the growth of the sliding crack array is studied and the simulated strengths of a granite under dynamic compression are correspondingly obtained. It is concluded that the simulated rock strengths increase with increasing strain rates at different confining pressures, and the rising rates have a trend to decrease with increasing confining pressures. It is also indicated that the simulated rock strengths increase with increment of confining pressure at different strain rates, and the rising rates are almost identical at different strain rates. The simulation results are validated by the experimental data for the granite. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
11.
Effect of Rapid Thermal Cooling on Mechanical Rock Properties 总被引：1，自引：1，他引：0
Laboratory tests have been conducted to investigate the effects of rapid thermal cooling on various rock specimens including igneous, sedimentary, and metamorphic rocks. At first, various types of thermal loading were conducted: heating up to 100, 200, and 300 °C, followed by rapid cooling with a fan. In addition, multiple cyclic thermal cooling (10, 15 and 20 cycles) with a maximum temperature of only 100 °C was conducted. Experiments included edge notched disc (END) tests to determine the Mode I fracture toughness, Brazilian disc tests to determine tensile strength, seismic tests to determine P-wave velocity, and porosity tests leading to meaningful results. Even though only small changes of temperature (rapid cooling from 100 °C to room temperature) were applied, the results showed that crack growth occurred in some rock types (granite, diabase with ore veins, and KVS) while crack healing occurred in other rock types (diabase without ore veins, quartzite, and skarn). To better understand the results, 3D transient thermo-mechanical analysis was conducted using the ANSYS program. The results indicated that there was a thin region near the outside of the specimen where large tensile stresses occur and microcracking would be expected, and that there was a large area in the middle of the specimen where lower magnitude compressive stresses occur and crack closure would be expected. It was found that the more heterogeneous and more coarse-grained rock types are more likely to exhibit crack growth, while less heterogeneous and more fine-grained rocks are more likely to exhibit crack healing. 相似文献
12.
Huang Mingchang 《岩土力学》1985,6(1):37-45
This Program adopts nonlinear variable-modular, uses uniaxial strain load-unload curve of rocks and dynamic tensile strength. In calculation, adopted load-unload criterion of stress wave propagation was to decide load-unload state of element and to adjusts and transfers internal stress for tensile failure element as well. The program uses incremental method to obtain displacements, velocity acceleration, stresses and strains for any instant. The results show that stresses and strains of calculation are well coincident with those from measurements. 相似文献
13.
本程序采用非线性变模量模型,并应用了岩石的无侧向应变加卸载试验曲线和动抗拉强度。计算中用应力波传播的加卸载判别准则来决定单元的加卸载状态,对受拉破坏单元进行内部应力调整和应力转移。使用增量法求得每个时刻的位移、速度、加速度和应力、应变。结果表明计算的和实测的应力应变比较接近。 相似文献
14.
M. Mohammadi 《Geomechanics and Geoengineering》2015,10(1):57-67
In this study the relationship between brittle rocks’ behaviour and uniaxial compression stress is obtained based on the Mohr-Coulomb failure criterion and the behavioural characteristics of brittle rocks under uniaxial compression stress are investigated. According to the laboratory uniaxial compression tests on granite rocks, and also available results in the literature, required parameters in the study are obtained. It is indicated that the behaviour of brittle rocks which is affected by uniaxial compression is function of cohesion. In the other words, cohesion changes as the uniaxial compression increases. Also, in yield point where its stress is equivalent to the uniaxial compressive strength, the cohesion maximises. By suggesting a new viewpoint to the Mohr’s circle, normal stresses on failure plane, shear stresses tangential to the failure plane and hydrostatic stresses are investigated. Results show that, normal stress on the failure plane in yield point of the behavioural curve equals zero and shear stress tangential to the failure plane is maximum which is equal to the maximum rocks’ natural strength. Also, in this point the strength is equi-pressure, therefore the stress is of hydrostatic type. 相似文献
15.
水对岩石亚临界裂纹扩展及门槛值的影响研究 总被引：2，自引：0，他引：2
亚临界裂纹扩展是岩体工程时间相依性的主要原因之一。采用常位移松弛法,对饱水和干燥两种状态下的大理岩、花岗岩双扭试件进行了亚临界裂纹扩展试验研究,获得了两种岩石在两种状态下的亚临界裂纹扩展速率V与应力强度因子 的关系,分析了两种岩石在两种状态下亚临界裂纹扩展的规律,并确定了两种岩石在两种状态下的门槛值（干燥状态）：大理岩 为1.365,花岗岩 为2.305;（饱水状态）：大理岩 为1.118,花岗岩 为1.490。研究表明,两种岩石的 与 关系有较好的线性规律, 但由于岩石本身矿物成分等的不均匀性,同种岩石的 与 关系离散性较大,饱水状态下离散性更大;水能加速岩石亚临界裂纹的扩展,且对不同的岩石,其影响程度也不一样;水可以使岩石亚临界裂纹扩展的门槛值有较大幅度降低,不同岩石其降低的程度也不一样。 相似文献
16.
Static and Dynamic Flexural Strength Anisotropy of Barre Granite 总被引：5，自引：2，他引：3
Granite exhibits anisotropy due to pre-existing microcracks under tectonic loadings; and the mechanical property anisotropy such as flexural/tensile strength is vital to many rock engineering applications. In this paper, Barre Granite is studied to understand the flexural strength anisotropy under a wide range of loading rates using newly proposed semi-circular bend tests. Static tests are conducted with a MTS hydraulic servo-control testing machine and dynamic tests with a split Hopkinson pressure bar (SHPB) system. Six samples groups are fabricated with respect to the three principle directions of Barre granite. Pulse shaping technique is used in all dynamic SHPB tests to facilitate dynamic stress equilibrium. Finite element method is utilized to build up equations calculating the flexural tensile strength. For samples in the same orientation group, a loading rate dependence of the flexural tensile strength is observed. The measured flexural tensile strength is higher than the tensile strength measured using Brazilian disc method at given loading rate and this scenario has been rationalized using a non-local failure theory. The flexural tensile strength anisotropy features obvious dependence on the loading rates, the higher the loading rate, the less the anisotropy and this phenomenon may be explained considering the interaction of the preferentially oriented microcracks. 相似文献
17.
以CCD相机配合高速相机搭建试验变形观测系统,开展不同加载速率下含Ⅰ型预制裂纹花岗岩试件的三点弯试验。利用数字散斑相关方法对试验过程采集的数字散斑图像进行分析,对不同加载速率作用下含Ⅰ型预制裂纹花岗岩试件裂纹扩展过程中的变形演化特征、裂纹扩展速率、裂纹尖端张开位移、裂纹张开角以及初始断裂应力强度因子进行研究,研究结果表明：（1）花岗岩试件初始裂纹扩展速率随着加载速率的增加总体呈线性增加趋势;最大扩展速率随着加载速率增加呈现先较快增加后缓慢增加的变化趋势。（2）不同加载速率作用下,花岗岩试件预制裂纹尖端张开位移均呈现非线性缓慢增长-迅速增长-线性增长的变形趋势,且线性增长阶段曲线斜率随着加载速率的增加而增大。（3）随着加载速率的增加,花岗岩试件初始裂纹张开角先逐渐减小后稳定在0.1o～0.13o。（4）随着加载速率的增加,花岗岩试件初始断裂应力强度因子呈指数增长。 相似文献
18.
动载荷作用下岩石破坏过程的数值试验研究 总被引：3，自引：0，他引：3
采用基于细观损伤力学基础上开发的动态版RFPA2D数值模拟软件,对动载荷作用下应力波延续时间、应力波峰值和围压对岩石试样破坏的影响进行了数值研究,结果表明,应力波延续时间较短,则尾随应力波波前的高应力区范围较窄,应力波衰减较快;相反,应力波延续时间较长,则紧跟应力波波前的高应力区范围较大,岩石处于破坏状态的时间延长,岩石的破碎程度加大。此外,存在一个合适的应力波延续时间,过分地加大应力波延续时间,反而不利于岩石裂隙的发育。动载荷的峰值越大,试样的破坏程度越大,当峰值达到一定值时,试样顶部呈现粉碎状,试样从上到下破坏程度逐渐减弱。在冲击载荷作用下的岩石随着围压的增加更难破碎,但当围压增大到一定程度时,岩石会突然失稳破坏。 相似文献
19.
Digital Image Based Approach for Three-Dimensional Mechanical Analysis of Heterogeneous Rocks 总被引：2，自引：0，他引：2
Summary This paper presents a digital image based approach for three-dimensional (3-D) numerical simulation and failure analysis of
rocks by taking into account the actual 3-D heterogeneity. Digital image techniques are adopted to extract two-dimensional
(2-D) material heterogeneity from material surface images. The 2-D image mesostructures are further extrapolated to 3-D cuboid
mesostructures by assuming the material surface as a representation of the inner material heterogeneity within a very small
depth. The iterative milling and scanning system is set up to generate the 3-D rock mesostructures. A Hong Kong granite specimen
is used as an example to demonstrate the procedure of 3-D mesostructure establishment. The mechanical responses and failure
process under the conventional Brazilian tensile test condition are examined through numerical analyses. The stress distribution,
crack propagation process and failure model of heterogeneous material cases are simulated with a finite difference software.
The numerical results indicate that material heterogeneity plays an important role in determining the failure behavior of
rocks under external loading. 相似文献
20.
脆性岩石材料在压应力作用下常出现两类裂纹：翼型张拉裂纹和次生剪切裂纹。近场动力学是一种新型的无网格数值计算方法。在近场动力学理论中,采用积分形式的控制方程代替微分形式的控制方程使得该数值算法在断裂问题上具有独特的优势。将Mohr-Coulomb准则和最大主应力准则引入非普通“态”基近场动力学理论中,分别用于模拟材料常见的压剪和张拉破坏。这种扩展的非普通“态”基近场动力学可以有效地模拟脆性岩石材料在多种受力状态下的裂纹起裂、扩展和连接问题。通过5个不同的数值算例说明该数值算法在处理脆性岩石材料断裂问题的有效性和准确性。首先,通过模拟含圆孔的弹性板拉伸数值试验说明该数值算法的有效性和准确性。其次,数值模拟了简单三点弯曲试验以及不使用其他外部准则条件下动荷载作用下裂纹的分叉试验,所得结果与其他试验结果或数值结果相吻合,从而验证了该理论的有效性。然后,模拟了包含斜裂纹的巴西圆盘试验,裂纹扩展路径和计算所得的断裂韧度同样吻合于试验结果。最后,模拟了单轴压缩状态下,预制裂纹试样的裂纹扩展和连接问题。将该数值算法与试验结果对比表明,所提出的数值方法可以模拟和预测岩石类材料的张拉和压剪裂纹的起裂、扩展和连接行为。 相似文献