共查询到20条相似文献，搜索用时 31 毫秒
1.
Isolated, high relief carbonate platforms developed in the intracratonic basin of east-central Mexico during Albian-Cenomanian time. Relief on the platforms was of the order of 1000 m and slopes were as steep as 20–43°. Basin-margin debris aprons adjacent to the platforms comprise the Tamabra Formation. In the Sierra Madre Oriental, at the eastern margin of the Valles-San Luis Potosi Platform, an exceptionally thick (1380m) progradational basin to platform sequence of the Tamabra Formation can be divided into six lithological units. Basinal carbonate deposition that preceded deposition of the Tamabra Formation was emphatically punctuated by an allochthonous reef block 1 km long by 0·5 km wide with a stratigraphic thickness of 95 m. It is encased in Tamabra Formation unit A, approximately 360 m of peloidal-skeletal wackestone and lithoclastic-skeletal packstone that includes some graded beds. Unit B is 73 m of massive dolomite with sparse skeletal fragments and intraclasts. Unit C, 114m thick, consists of structureless skeletal wackestone passing upward into graded skeletal packstone. Interlaminated lime mudstone and fine grained bioclastic packstone with prominent horizontal burrows are interspersed near the top. Unit D is 126 m of breccia with finely interbedded skeletal grainstone and burrowed or laminated mudstone. The breccias contain a spectrum of platform-derived lithoclasts and basinal intraclasts, up to 10 m in size. The breccias are typically grain supported (rudstone) with a matrix of lightly to completely dolomitized mudstone or skeletal debris. Beds are up to several metres thick. Unit E is 206 m of massive, sucrosic dolomite that replaced breccias. Unit F is approximately 500 m of thick bedded to massive skeletal packstone with abundant rudists and a few mudstone intraclasts. Metre scale laminated lime mudstone beds are interspersed. The section is capped by El Abra Formation platform margin limestone, consisting of massive beds of caprinid packstone and grainstone with many whole valves. Depositional processes within this sequence shift from basinal pelagic or peri-platform sedimentation to distal, platform-derived, muddy turbidity currents with a large slump block (Unit A); through more proximal (coarser and cleaner) turbidity currents (Unit B?, C); to debris flows incorporating platform margin and slope debris (Units D, E). Finally, a talus of coarse, reef-derived bioclasts (Unit F) accumulated as the platform margin prograded over the slope sequence. Interspersed basinal deposits evolved gradually from largely pelagic to include influxes of dilute turbidity currents. Units containing turbidites with platform-derived bioclasts reflect flooding of the adjacent platform. Breccia blocks and lithoclasts were probably generated by erosion and collapse of the platform during lowstands. Laminated, black, pelagic carbonates, locally cherty, are interbedded with both breccias and turbidites. At least those interbedded with turbidites may have been deposited within an expanded mid-water oxygen minimum zone during relative highstands of sea level. They are in part coeval with mid-Cretaceous black shales of the Atlantic Ocean. 相似文献
2.
Well‐exposed Mesozoic sections of the Bahama‐like Adriatic Platform along the Dalmatian coast (southern Croatia) reveal the detailed stacking patterns of cyclic facies within the rapidly subsiding Late Jurassic (Tithonian) shallow platform‐interior (over 750 m thick, ca 5–6 Myr duration). Facies within parasequences include dasyclad‐oncoid mudstone‐wackestone‐floatstone and skeletal‐peloid wackestone‐packstone (shallow lagoon), intraclast‐peloid packstone and grainstone (shoal), radial‐ooid grainstone (hypersaline shallow subtidal/intertidal shoals and ponds), lime mudstone (restricted lagoon), fenestral carbonates and microbial laminites (tidal flat). Parasequences in the overall transgressive Lower Tithonian sections are 1–4·5 m thick, and dominated by subtidal facies, some of which are capped by very shallow‐water grainstone‐packstone or restricted lime mudstone; laminated tidal caps become common only towards the interior of the platform. Parasequences in the regressive Upper Tithonian are dominated by peritidal facies with distinctive basal oolite units and well‐developed laminate caps. Maximum water depths of facies within parasequences (estimated from stratigraphic distance of the facies to the base of the tidal flat units capping parasequences) were generally <4 m, and facies show strongly overlapping depth ranges suggesting facies mosaics. Parasequences were formed by precessional (20 kyr) orbital forcing and form parasequence sets of 100 and 400 kyr eccentricity bundles. Parasequences are arranged in third‐order sequences that lack significant bounding disconformities, and are evident on accommodation (Fischer) plots of cumulative departure from average cycle thickness plotted against cycle number or stratigraphic position. Modelling suggests that precessional sea‐level changes were small (several metres) as were eccentricity sea‐level changes (or precessional sea‐level changes modulated by eccentricity), supporting a global, hot greenhouse climate for the Late Jurassic (Tithonian) within the overall ‘cool’ mode of the Middle Jurassic to Early Cretaceous. 相似文献
3.
贵阳乌当地区中、上奥陶统沉积学研究 总被引：1，自引：0，他引：1
贵阳乌当地区上奥陶统碳酸盐岩地层与扬子地区同时代地层相比具有其特殊性,黄花冲组与宝塔组"龟裂纹"灰岩时代相当.通过对该地区中、上奥陶统碳酸盐岩的研究,划分出亮晶生屑灰岩相、泥晶生屑灰岩相、含生屑泥晶灰岩相、生屑泥晶灰岩相和页岩-粉砂岩相5种沉积相;根据沉积相组合推断此时期乌当地区黄花冲组处于局限潮下低能环境. 相似文献
4.
The Jubaila Formation (Upper Jurassic) in central Saudi Arabia has been divided into lower, middle, and upper parts purely on lithologic grounds. Each part consists of a major lower unit of lime mudstone and a minor upper unit of grainstone. This persistent change in the limestone facies is interpreted as a reflection of repeated shoaling up in the depositional shelf environment. It is a normal marine carbonate sequence that varies in thickness from 85 to 126 m. In the Hanifa Formation, the lowermost brown ledges in the section comprise a series of coarsening upward sequences which generally terminate in a fossiliferous/peloidal packstone and grainstone and subordinately lime mudstone facies. The middle slope member is yellow, blocky weathered shale and marl. Above this slope member are several thick beds of brown-coated fossiliferous wackestone, packstone, and grainstone with the association of lime mudstone in certain levels. These are fairly resistant ledges due to the occurrence of stromatoporoids. Dedolomitization occurs in the Jubaila Formation in various textural forms which include composite calcite rhombohedra, zonal dedolomitization, regeneration of predolomitization fabric of the limestone, and coarsely crystalline calcite mosaics with or without ferric oxide rhombic zones. Rhombohedral pores commonly occur in intimate association with dolomite, possibly resulting from the leaching of calcitized dolomite rhombohedra. The regional dedolomitization was most likely brought about by calcium sulfate solutions reacting with dolomites. The source of sulfate solutions is the dissolved anhydrite deposits of the Arab–Hith Formations, sometime before their erosion, and it takes place at or near an exposed surface. The Hanifa Formation shows various diagenetic features. These include dolomitization, dedolomitization, micritization, cementation, and recrystallization. Most of the examined samples of the Hanifa carbonates are dolomitized and subsequently dedolomitized as evidenced by the presence of iron-coated dolomite rhombs partially or completely calcitized. Dolomite also occurs in the lime mudstone, wackestone, packstone, and grainstone facies, while leaching of wackestone and packstone and dedolomitization of dolomite and dolomitic limestone followed by recrystallization are common processes. 相似文献
5.
The Ordovician Daylesford Limestone at Bowan Park and the Fossil Hill Limestone at Cliefden Caves have diagenetic and pedogenic features of microkarst, paleosols and calcrete associated with subaerial disconformities in their stratigraphic sequences, all of which, as an ensemble, have global geoheritage significance. The original shelly limestones, lime mudstones, and coralline limestones have selectively dissolved to form vugular limestone whose cavities have filled with sparry calcite and/or crystal silt. The limestones also have been calcretised to develop massive and laminar calcrete and calcrete ooids. Below disconformity surfaces are bleached limestone, crystal-silt and spar-filled fossil moulds and enlarged moulds, micro-breccia-filled moulds and fissures filled with crystal silt, calcrete pellets and calcrete ooids. The disconformity surfaces are irregular or undulating interfaces between lithologies, fissures and fissure-fills, and calcrete. Above disconformities there are limestone lithoclasts, remanié fossils, calcreted limestone, veined limestone, calcrete ooids, laminated calcrete, lithoclast grainstone, or calcrete-ooid grainstone, and lithoclasts with fossils moulds filled with crystal silt and/or spar. The lithological, stratigraphic and possibly landscape differences, make the subaerial diagenesis/pedogenesis in the Daylesford Limestone subtly different to that of the Fossil Hill Limestone. Subaerial disconformities and associated diagenesis/pedogenesis, as recorded in these formations, are not widely reported globally nor well represented in Ordovician limestones. The microkarst features provide insights into the types of subaerial diagenesis/pedogenesis during the Ordovician and into climate, landscape setting, paleohydrology, and groundwater/rainwater alkalinity. Consequently, the story of the Ordovician microkarst, paleosols and calcrete ooids is unique and globally of geoheritage significance as examples of subaerial alteration in an ancient high-rainfall, tropical climate volcanic island environment in a tectonically active region. 相似文献
6.
Mohammed F. Al-Ghreri Amer S. Al-jibouri Ahmed Asker Al-Ahmed 《Arabian Journal of Geosciences》2014,7(7):2679-2687
The Euphrates formation is widely exposed in western Iraq near Al-Qaim area. It extends eastward parallel to the Euphrates River on both sides, crossing Anah, Hadetha, and Al-Baghdadi vicinities. Based on the benthic foraminiferal assemblages and microfacies features, 12 different microfacies types have been recognized into two Stratigraphic sections that are lime mudstone, wackestone, bioclastic wackestone, miliolids wackestone, alveolinids wackestone, packstone, bioclastic packstone, peloidal packstone, miliolids packstone, peneroplids packstone, rotaliids packstone, grainstone, peloidal grainstone, oolitic grainstone, and miliolids grainstone. Accordingly, the depositional environments were recognized on the basis of microfacies identification and interpretation ranging from restricted marine, shoal, to open marine environments. The exposed Euphrates succession is represented by four fourth-order cycles (A, B, C, and D); they are mostly asymmetrical showing slightly lateral variation in thickness and symmetry. These cycles represent a succession episode of sea level rises and stillstands. The nature of these cycles reflects variation in the relative sea level resulted from eustatic and tectonic subsidence. Cycle A is underlain by SB1 of Sheik Alas formation in Al-Baghdadi section and by Anah formation in Wadi Hjar section. Cycle D is overlain by SB1 of Fatha formation in Al-Baghdadi section and by conformable contact of Nfayil formation in Wadi Hjar section. According to sequence development, the study area shows low rate of subsidence and the major controlling factor that affects eustatic sea level fluctuation. 相似文献
7.
A. H. M. Ahmad A. F. Khan S. M. Wasim 《Journal of the Geological Society of India》2013,82(2):181-189
The study deals with the depositional environment of Jumara Dome sediments. The Jumara Dome is an important outcrop of Bathonian to Oxfordian sediments amongst the Kachchh Mainland exposures. On the basis of facies analysis three associations have been documented, namely, G-1 consisting of low energy facies comprising of cross-bedded sandstone, massive sandstone, grey shale and thin bedded sandstone, bioclastic — lithoclastic grainstone, bioclastic — lithoclastic packstone, microbioclastic packstone/wackestone, bioturbated laminated wackestone to mudstone and pelagic lime mudstone; G-II consisting of moderate energy facies comprising of laminated sandstone and grapestone or agglutinated grainstone; G-III consisting of high energy facies comprising of interbedded gypsiferous shale and sandstone/siltstone, oolitic grainstone to conglomerate and bioclastic grainstone. The facies associations reflect an ideal shallowing upward sequence representing slope, bioclast bar, lagoon and inner shelf. Presence of wide range of facies indicates that the rocks of the studied area were deposited during the fluctuating sea level, interrupted by the storms, in the shallow marine environment. 相似文献
8.
重庆市万盛区中二叠统碳酸盐岩分布广泛，露头发育良好，发育有10种微相类型，即灰泥石灰岩、筵粒泥灰岩、球粒生物碎屑粒泥灰岩、生物碎屑内碎屑泥粒灰岩、荷叶藻泥粒灰岩、鲕粒内碎屑泥粒岩/颗粒岩、小有孔虫泥粒灰岩、生物碎屑泥粒灰岩、绿藻颗粒灰岩和生物碎屑颗粒灰岩。综合分析表明，研究区中二叠统形成于滨岸、局限台地和开阔台地环境，据此建立了沉积相模式。 相似文献
9.
Afrah H. Saleh 《Arabian Journal of Geosciences》2014,7(8):3175-3190
The Yamama Formation is the main Lower Cretaceous (late Berriasian–Valangenian) carbonate reservoir in southern Iraq. Petrographic study from thin-section examination shows that the skeletal grains included calcareous algae from both red and green algae. Red algae is concentrated in the upper part of the Formation, and the most important of this algae species is Permocalculus ssp. Green algae is less common, and its concentration is in the middle part of the Formation. The most species found in the Yamama Formation is dasycladeans, and both small and large species of benthonic foraminifera such as Nautiloculina, Textularia, Trocholina, Pseudocyclammina, and Everticyclammina are also present. The non-skeleton grains included oolites, pellets, and micrite. Six cyclic type microfacies have been recognized for Yamama Formation in Ratawi-3 (Rt-3) and Ratawi-4 (Rt-4) Wells, namely peloidal packstone–grainstone, algal wackestone–packstone, oolitic–peloidal grainstone, bioclastic wackestone–packstone, foraminiferal wackestone, and mudstone microfacies. The latter has been divided into two submicrofacies: argillaceous lime mudstone and fossiliferous lime mudstone. The lateral extension of these microfacies has been identified by integrating the thin-section data and well logs’ character variations with similar characteristic for microfacies. The Yamama Formation was affected by five diagenetic processes, which are micritization, cementation, recrystallization, silicification, and stylolites. The Yamama Formation was deposited during a regressive period within the outer ramp, shoal, and inner ramp setting. 相似文献
10.
Eight subsurface sections and a large number of thin sections of the Mishrif Limestone were studied to unravel the depositional
facies and environments. The allochems in the Mishrif Formation are dominated by bioclasts, whereas peloids, ooids, and intraclasts
are less abundant. The sedimentary microfacies of the Mishrif Formation includes mudstone, wackestone, packstone, grainstone,
floatstone, and rudstone, which have been deposited in basinal, outer shelf, slop followed by shoal reef and lagoonal environments.
The formation displays various extents of dolomitization and is cemented by calcite and dolomite. The formation has gradational
contact with the underlying Rumaila Formation but is unconformably overlain by the Khasib Formation. The unconformity is recognized
because the skeletal grains are dominated by Chaophyta (algae), which denotes the change of environment from fully marine to lacustrine environment. Thus, the vertical bioclast
analysis indicates that the Mishrif Formation is characterized by two regressive cycles, which control the distribution of
reservoir quality as well as the patterns of calcite and dolomite cement distribution. Mishrif Formation gradationally overlies
Rumaila Formation. This was indicated by the presence of the green parts of Chaophyta (algae) as main skeletal grains at the uppermost part of well Zb-47, which refer to lacustrine or fresh water environment.
Petrographical study shows that the fossils, peloids, oolitis, and intraclasts represent the main allochem. Calcite and dolomite
(as diagenetic products) are the predominant mineral components of Mishrif Formation. Fossils were studied as an environmental
age and facial boundaries indicators, which are located in a chart using personal computer programs depending on their distributions
on the first appearance of species. Fifteen principal sedimentary microfacies have been identified in the Mishrif Formation,
which includes lime mudstone, mudstone–wackestone, wackestone, wackestone–packstone, packstone, packstone–grainstone, grainstone–floatstone,
packstone–floatstone, packstone–rudstone, and wackestone–floatstone. Markov chain analysis has been used to study the transitional
pattern of different microfacies types vertically in each well and laterally in all wells as a composite section. The vertical
analysis indicates that the Mishrif Formation characterized by two regressive cycles, the main one started with basinal or
outer shelf environment, slop environment followed by shoal or reefal environment, and ended with a lagoonal environment.
The lateral analysis shows the same regressive cycle, and by using the lithofacies association concepts, we built the depositional
model of the Mishrif Formation environment. 相似文献
11.
西藏改则县热那错东沟剖面上三叠统卡尼阶至瑞替阶日干配错组沉积了厚度较大的碳酸盐岩地层,其中化石丰富。在碳酸盐岩中识别出11种主要的岩石类型：灰泥灰岩﹑含生物碎屑灰泥灰岩、生物碎屑粒泥灰岩、生物碎屑泥粒灰岩、内碎屑泥粒灰岩、内碎屑颗粒灰岩、藻颗粒灰岩、多种类型鲕粒灰岩、单一类型鲕粒灰岩、球粒泥粒灰岩和生物礁灰岩。根据岩石特征及组合类型可划分为5种沉积相：陆源碎屑滨岸相、局限台地相、开阔台地相、台地边缘浅滩相和台地边缘礁相,它们共同构成了日干配错组4个有序的海侵—海退旋回,整体显现出海侵的相序结构。 相似文献
12.
This paper focuses on the formative processes of limestone pseudoconglomerates in the Gushan and Chaomidian Formations (Late Cambrian) of the North China Platform, Shandong Province, China. The Gushan and Chaomidian Formations consist mainly of limestone and shale (marlstone) interlayers, wackestone to packstone, grainstone and microbialite as well as numerous limestone conglomerates. Seventy‐three beds of limestone pseudoconglomerate in the Gushan and Chaomidian Formations were analysed based on clast and matrix compositions, internal fabric, sedimentary structures and bed geometry. These pseudoconglomerates are characterized by oligomictic to polymictic limestone clasts of various shapes (i.e. flat to undulatory disc, blade and sheet), marlstone and/or grainstone matrix and various internal fabrics (i.e. intact, thrusted, edgewise and disorganized), as well as transitional boundaries. Limestone pseudoconglomerates formed as a result of soft‐sediment deformation of carbonate and argillaceous interlayers at a shallow burial depth. Differential early cementation of carbonate and argillaceous sediments provided the requisite conditions for the formation of pseudoconglomerates. Initial deformation (i.e. burial fragmentation, liquefaction and injection) and subsequent mobilization and disruption of fragmented clasts are two important processes for the formation of pseudoconglomerates. Burial fragmentation resulted from mechanical rupture of cohesive carbonate mud, whereas subsequent mobilization of fragmented clasts was due to the injection of fluid materials (liquefied carbonate sand and water‐saturated argillaceous mud) under increased stress. Storm‐wave loading was the most probable deformation mechanism, as an external triggering force. Subsequent re‐orientation and rounding of clasts were probably prolonged under normal compactional stress. Eventually, disrupted clasts, along with matrix materials, were transformed into pseudoconglomerates by progressive lithification. Soft‐sediment deformation is prevalent in alternate layers of limestone and mud(marl)stone and/or grainstone, regardless of their depositional environments. 相似文献
13.
Outcrop and microscopic studies have been applied in this research paper in order to find out the Asmari Formation depositional sequences in the Shajabil Anticline section located at the north of the Izeh Zone,Zagros Basin,Iran.Five depositional sequences were identified based on 11 facies types （bioclast Nummulitidae Lepidocyclinidae packstone,bioclast perforate foraminifera Nephrolepidina Miogypsinoides wackestone-packstone,bioclast perforate foraminifera Corallinacea wackestone-packstone,bioclast echinoid Neorotalia Brachiopoda wackestone-packstone,coral floatstone-rudstone,bioclast Corallinacea imperforate foraminifera wackestone-packstone,bioclast imperforate foraminifera Archaias wackestone-packstone,bioclast imperforate foraminifera Dendritina wackestone-packstone-grainstone,bioclast imperforate foraminifera Borelis wackestonepackstone and very fine sandy mudstone） corresponding to the tidal flat,restricted and semirestricted lagoon and open marine environments of an inner and middle shelf areas.Well-exposed outcrop horizons of Thalassinoides at the study section are a favorable tool for the regional outcrop sequence stratigraphy.Thalassinoides is considered as an outcrop key-bed for recognition of the Rupelian-Chattian maximum flooding depositional sequence.Coral remnants （small colonies） in outcrop exposures also are associated with the HST depositional sequence （Chattian） for the Asmari Formation.The most important achievement of this research is use of associated maximum flooding surfaces （Pg30,Pg40,Pg50,Ngl0 and Ng20） in the Arabian plate.These maximum flooding surfaces could be recorded as an isochrones surface. 相似文献
14.
重庆老龙洞二叠系-三叠系界线地层的海平面下降事件 总被引：15，自引：4，他引：15
老龙洞的二叠系-三叠系界线地层剖面许多学者做过研究,关于其海平面变化问题的争论一直没有解决。本文的研究首次在该剖面上发现了明显的侵蚀面,说明曾经有海平面下降事件。对沉积环境的解释也有新的认识。该剖面在长兴期钙质海绵灰岩之上沉积了一套开阔台地相的沉积,其上是1.4m 厚的局限台地相沉积,具有斑点状构造。此层顶部出现一个波状起伏的侵蚀面。侵蚀面上下的岩性不同。此面之上是0.8m 厚的浅水的局限台地相沉积,具有树枝状的构造和外貌。此层顶面是一个更加明显的侵蚀面,起伏高差达到0.3m 以上。侵蚀面上下的岩性截然不同,以及其上岩石层理与侵蚀面的斜交关系,以及侵蚀面的形态把侵蚀面同缝合线区分开来。这个侵蚀面代表一次显著海平面下降事件之后的一次较长时间的出露和风化剥蚀。侵蚀面之上是透镜状分布的灰色的层状的小腹足类的颗粒岩,再上是一薄层灰黄色的泥粒岩,含丰富的小双壳类。此层以上是青灰色的薄板状的泥质灰泥岩,舍丰富的0.3～3mm 大小的、内部重结晶的同生角砾。 相似文献
15.
The Neogene carbonate rocks have relatively small exposure relative to the siliciclastic and evaporite rocks in Rabigh and Ubhur areas, north Jeddah, Red Sea coastal plain of Saudi Arabia. The Miocene carbonates form small hills in both areas, which conformably overlie the siliciclastics, whereas the Pleistocene coral reefs form terraces facing the Red Sea in Rabigh area. The Neogene carbonates are represented by the following microfacies types: (1) dolomitic, oolitic, foraminiferal packstone; (2) sandy, dolomitic, intraclastic, foraminiferal packstone; (3) dolomitic and oolitic wackestone; (4) dolomitic, foraminiferal, intraclastic wackestone; (5) dolomitic mudstone; (6) coral boundstone; and (7) grainstone. The diagenetic processes affecting these carbonates are compaction, dissolution, aggrading neomorphism, and replacement that took place during deposition, shallow burial, and uplift. Pervasive dolomitization by the seepage reflux mechanism is responsible for the mimic replacement of the calcite of the original component of the limestone with dolomite. Sediments, biota, and lithofacies characteristics of the studied carbonate rocks of Rabigh and Ubhur areas indicate the presence of three facies zones; these are (1) FZ 5 platform margin reefs, (2) FZ 6 (platform margin sand shoals), and (3) FZ 7 platform interior-normal marine. The standard microfacies types are represented by (1) SMF 12, limestone with shell concentration; (2) SMF 15, oolitic wackestone and packstone; and (3) SMF 18, bioclastic grainstone and packstone with abundant benthic foraminifera. 相似文献
16.
The Pliocene to possibly Pleistocene uppermost Orubadi and Era Formations, southwest margin of the Papuan Peninsula, are interpreted as having been deposited in alluvial-fan, fan-delta and shallow-marine environments. The alluvial-fan facies consists primarily of lenticular, coarse-grained conglomerate (up to 2 m boulders) and cross-bedded and horizontally laminated sandstone. Conglomerate and sandstone were deposited in shallow fluvial channels and by overbank sheetfloods. The facies also contains thick mudflow diamictite and minor tuff and terrestrial mudstone. The shallow-marine and fan-delta facies, in contrast, consists of heterogeneously interbedded marine and terrestrial mudstone, sandstone, diamictite, conglomerate and limestone. Marine mudstone is calcareous, sandy, bioturbated, and contains marine shells. Limestone is mostly packstone that has a varied, open-marine fauna. Rare coral boundstone is also present. Marine sandstone is burrowed to bioturbated and is hummocky cross-stratified in places. Some marine mudstone contains sandstone pillows formed by loading of unconsolidated sand by storm waves. Other sandstone in the fan-delta facies is cross-bedded, lacks shells and was probably deposited by fluvial processes. Several conglomerate beds in the fan-delta facies are well sorted and imbricated and were also deposited by stream floods. The synorogenic Orubadi and Era Formations were deposited in a foreland basin formed from loading of the Papuan–Aure Fold and Thrust Belt on the edge of the Australian craton. Deformation in the fold and thrust belt was probably related to docking and compression of the Finisterre Terrane–Bismarck Arc against the New Guinea Orogen. The Era Formation interfingers with the reefal Wedge Hill Limestone in which reef facies likely grew on a deforming anticline. Era Formation siliciclastics were sourced from volcanic, metamorphic and sedimentary rocks that were uplifted in the orogen to the northeast. Volcanic sediment was derived mostly from a then-active volcanic arc likely related to southward subduction at the Trobriand Trough. 相似文献
17.
Hammad Tariq JANJUHAH Josep SANJUAN Mohammad ALQUDAH Mohamed K. SALAH 《《地质学报》英文版》2021,95(5):1668-1683
Carbonate rocks contain prolific hydrocarbon reserves all over the world, particularly in the Middle East. For exploration and production strategies, it is essential to understand carbonate reservoirs in terms of their internal characteristics, depositional environment, relative age, diagenetic processes and impact on petrophysical properties. This study has been performed on exposed Cretaceous, Paleocene and Miocene marine carbonate sedimentary sequences in two localities (Maghdoucheh and Qennarit) near the city of Sidon (Southern Lebanon). It represents the first comprehensive study that takes into consideration the carbonate reservoir facies, diagenetic history and reservoir quality in the area. Rocks at Maghdoucheh are mainly dominated by limestone beds showing sedimentary structures and erosive bases alternating with microfossil-rich silty marls, related to a shallowing upward sequence in a restricted marine platform environment. Shells of benthic foraminifera and mollusks dominate the fossil assemblage extracted from the studied rocks. The microfossil and nannofossil assemblage detected in the Maghdoucheh sections indicates a middle Miocene age. Rocks at Qennarit are composed of mudstone/wackestone limestone beds rich in planktonic foraminifera and nannofossils related to open marine conditions. Based on the nannofossil content, rocks from Qennarit 1 and 2 are Paleocene and Cretaceous in age, respectively. Four main types of microfacies have been identified, i.e. (1) microbioclastic peloidal calcisiltite, (2) pelagic lime mudstone and wackestone with planktonic microfossils, (3) grainstone/packstone with abundant foraminifera and (4) fenestral bindstones, mudstones and packstones with porostromate microstructures. The porosity-permeability (poro-perm) analysis of representative samples reveals moderate to good porosity but very low permeability. This is mainly due to the presence of large moldic pores that are isolated in nature. The diagenetic features are dominated by micritization and dissolution (both fabric selective and non-fabric selective). Among all diagenetic features, dissolution in both localities contributes to porosity enhancement, while micritization, cementation, compaction and the filled fractures have negative impacts on permeability; hence the overall reservoir quality. 相似文献
18.
Well‐cuttings, wireline logs and limited core and outcrop data were used to generate a regional, three‐dimensional sequence framework for Upper Mississippian (Chesterian), Greenbrier Group carbonates in the Appalachian foreland basin, West Virginia, USA. The resulting maps were used to document the stratigraphic response of the basin to tectonics and to glacio‐eustasy during the transition into ice‐house conditions. The ramp facies include inner ramp red beds and aeolianites, lagoonal muddy carbonates, mid‐ramp ooid and skeletal grainstone shoal complexes, and outer ramp wackestone–mudstone, that grades downslope into laminated silty lime mudstone. The facies make up fourth‐order sequences, a few metres to over 90 m (300 ft) thick. The sequences are bounded along the ramp margin by lowstand sandstones and calcareous siltstones. On the ramp, sequence boundaries are overlain by thin transgressive siliciclastics and aeolianites, and only a few are calichified. Maximum flooding surfaces on the outer ramp lie beneath deeper water facies that overlie lowstand to transgressive siliciclastic or carbonate units. On the shallow ramp, maximum flooding surfaces overlie siliciclastic‐prone transgressive systems tracts, that are overlain by highstand carbonates with significant grainstone units interlayered with lagoonal lime mudstones. The fourth‐order sequences are the major mappable subsurface units; they are bundled into weak composite sequences which are bounded by red beds. In spite of differential subsidence rates across the foreland basin (1 to 3 cm/k.y. up to 25 cm/k.y.), eustatic sea‐level changes controlled regional sequence development. Thrust‐load induced differential subsidence of fault‐blocks, coupled with in‐plane stress, controlled the rapid basinward thickening of the depositional wedge, whose thickness and facies were influenced by subtle structures such as arches trending at high angles as well as parallel to the margin. 相似文献
19.
Globally significant geoheritage features of the Cliefden Caves area, in the Belubula River Valley between Orange and Cowra in central western New South Wales, comprise a richly fossiliferous shallow-water limestone succession of Late Ordovician age (the Cliefden Caves Limestone Subgroup) overlain by deep-water laminites and allochthonous limestones of the Upper Ordovician Malongulli Formation. Key features of the Ordovician geology of the Cliefden Caves area that have been identified using the Geoheritage Toolkit as being of international significance are the abundance of unique and exceptionally diverse fossils in the Fossil Hill Limestone (forming the lower part of the Cliefden Caves Limestone Subgroup), which supplement detailed interpretation of carbonate-dominated deposition within an Ordovician volcanic island setting. The fossiliferous limestones preserve biostromes and local small bioherms of stromatoporoids and corals, and recurrent in situ and disarticulated/imbricated Eodinobolus shell beds formed in shallow, quiet-water, dominantly muddy carbonate sediments that passed up-sequence to clay-free carbonate environments. These mud-dominated carbonate sediments are interspersed with higher-energy conditions, represented by skeletal, lithoclastic and calcrete-ooid grainstones overlying disconformities, leading to the identification of subaerial disconformities and associated diagenesis in the Fossil Hill Limestone. The Fossil Hill Limestone is succeeded by massive limestones in the middle part of the Cliefden Caves Limestone Subgroup and then, in turn by the Vandon Limestone and the deeper-water graptolitic laminites of the Malongulli Formation—this completes a succession that is rarely preserved in the geological record, further enhancing the geoheritage significance of the Cliefden Caves area. 相似文献