共查询到20条相似文献，搜索用时 140 毫秒
1.
两种湍流模型在潮流能水轮机数值模拟中的适用性研究 总被引：1，自引：0，他引：1
在对特定湍流条件下的水平轴潮流能水轮机进行数值模拟时,不同的湍流模型对于计算结果具有一定的影响。为选择合适的湍流模型对所设计水轮机的三维流场进行描述,将采用常用的两方程模型(SSTk-ω与Realizable k-ε)进行数值模拟,得到不同工况下水轮机的性能参数以及水轮机后1.5D处流场的流速、湍流强度分布情况,并进行模型水槽试验,试验值与采用两种湍流模型进行数值模拟得到的仿真值对比表明:在低尖速比工况下,采用SSTk-ω进行数值模拟得到的仿真值比Realizable k-ε更接近试验值,在较高尖速比时,采用Realizable k-ε进行模拟得到的数值更接近试验值;采用两种湍流模型进行数值模拟得到的速度分布具有相似性,但对于湍流强度的预测,SSTk-ω更具有优势。考虑此水轮机的实际工况,选择SSTk-ω湍流模型进行描述更加合理。 相似文献
2.
为了更准确地模拟潮流能水轮机的水动力学性能并研究边界层转捩对水轮机翼型水动力学特性的影响,本文采用κ-ε湍流模型以及γ-Re_θ转捩模型对水轮机翼型水动力学性能进行了考虑转捩的数值模拟。在进行转捩模拟时通过CFD软件的UDF接口将转捩经验关系式导入求解器中,在-5°～25°攻角范围内对水轮机翼型的水动力学性能进行了数值模拟。比较湍流模拟与转捩模拟下水轮机翼型的升阻力系数以及流场特征,结果表明:对水轮机翼型水动力学性能进行全湍流模拟时在小攻角范围内忽略了转捩前的层流状态,导致湍流模拟所得到的升力系数小于使用γ-Re_θ转捩模型的转捩模拟所得的升力系数;阻力系数则大于转捩模拟所得的结果;相比于全湍流模拟,转捩模拟时会更早的进入深失速状态。 相似文献
3.
4.
潮流能发电机组在工作中,水轮机与潮流流向之间的偏航角对于机组的性能有较大影响。基于ANSYS Fluent软件采用SST k-ω湍流模型和滑移网格旋转模型对不同偏航角下水轮机进行数值模拟,分析偏航工况下水轮机性能及尾流场特性,并进行试验验证。结果表明:随着偏航角的增大,轴向力系数与功率系数降低,尾流场流速变化不对称现象趋于明显,同时造成周围流场湍流强度增大。 相似文献
5.
海洋湍流模型研究自二十世纪 70年代中发展至今 ,在海洋动力学研究中 ,特别是关于混合 /层化研究中广泛应用 ,近年来由于认识到湍流对海洋生物过程的重要影响 ,对海洋湍流的客观描述更加关注。文中详细介绍了几个主要海洋动力学模型中的湍流封闭模式 ,如 HAMSOM中的Prandtl混合长模型、Johns模式中的 k-方程模型、POM中的 k- kl模型、水动力学中常用的 k-ε模型等等 ,介绍了海洋湍流模型的应用。对于湍流模型的使用提出针对具体问题选择的原则 ,复杂的并非最优的。 相似文献
6.
潮流能发电装置支撑结构对水轮机水动力学性能影响研究 总被引：1，自引：0，他引：1
水平轴潮流能水轮机在工作过程中,由于支撑结构的存在,会使水轮机周围流场中的潮流流向、流速等参数发生不同程度的改变,进而影响水轮机的性能和发电装置的稳定性。为了研究支撑结构对水轮机水动力学性能的影响规律,以某100 k W单立柱座底式潮流能发电装置的支撑结构为研究对象,采用CFD方法,分别在正、反向来流时采用不同支撑结构的共六种工况下,对潮流能水轮机模型的获能和受力进行数值模拟。通过水槽模型试验,验证数值模拟的可靠性。研究结果表明:支撑结构对水轮机的水动力学性能的影响不容忽视,针对所研究的支撑结构,在正向来流时水轮机的获能系数降幅约30%,轴向力系数降幅约28%;反向来流时的降幅更大,分别约为63%和41%。 相似文献
7.
潮流能发电水轮机的实际工作海域往往存在不同程度的湍流,而湍流会对潮流能发电水轮机的获能系数、轴向力系数和尾流场性能等产生影响。研究湍流对潮流能发电水轮机性能的影响规律,对于实海况下潮流能发电水轮机的性能预测、可靠性和安全性的提高以及潮流能发电场多机组排布优化等具有一定的参考价值。通过对潮流能发电水轮机试验模型进行建模,并用CFD(Computational Fluid Dynamics)分析软件Fluent对处于不同湍流强度下的潮流能发电水轮机性能进行数值模拟,得到其获能系数、轴向力系数及尾流场特性。通过分析数值模拟结果,并与相关参考文献的试验结果进行对比。研究结果表明:湍流强度越大,水轮机获能系数和轴向力系数越小,尾流场速度恢复越快;水轮机后方尾流场纵向和横向影响区域更大。 相似文献
8.
流体机械柔性叶片特有的性能引起越来越多的关注,柔性叶片潮流能水轮机因叶片自适应变形,具有不同于刚性叶片水轮机的水动力学性能。首先从二维层面分析柔性尾缘变形对翼型水动力学性能的影响。利用ANSYS对创建的柔性叶片模型进行静力学分析,获得翼型截面变形后的节点数据,建立变形后的翼型模型。利用CFD仿真软件,采用k-ωSST的湍流模型,对比分析原始翼型和变形后翼型升阻力系数、表面压力系数分布及流场变化。结果表明:尾缘柔性变形对翼型性能有较大影响,适当变形可以提高翼型的升力系数;变形后翼型升阻比在一定攻角下大于原始翼型,有利于改善原始翼型的水动力学性能。 相似文献
9.
10.
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
13.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
14.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
15.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
16.
17.
Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations. 相似文献
18.
19.
Phylogenetic diversity and phenotypic characterization of cultivable bacterioplankton isolated from polar oceans 总被引：1，自引：0，他引：1
A set of 27 marine planktonic bacteria isolated from the polar regions was characterized by 16S rDNA sequencing and physiological and biochemical testing. More than half of these bacteria were positive for caseinase, gelatinase and 13-glucosidase, and could utilize glucose, maltose or malic acid as carbon source for cell growth. Twelve isolates expressed nitrate reduction activities. Except for one antarctic isolate BSwlO175 belonging to Actinobacteria phylum, these isolates were classified as γ-Proteobacteria, suggesting that γ-Proteobacteria dominated in cultivable marine bacterioplankton at both poles. Genus Pseudoalteromonas was the predominant group in the Chukchi Sea and the Bering Sea, and genus ShewaneUa dominated in cultivable bacterioplankton in the Prydz Bay. With sequence similarities above 97%, genus Psychrobacter was found at both poles. These 27 isolates were psychrotolerant, and significant 16S rDNA sequence similarities were found not only between arctic and antarctic marine bacteria （ 〉 99% ）, but also between polar marine bacteria and bacteria from other aquatic environments （ ≥ 98.8% ）, including temperate ocean, deep sea, pond and lake, suggesting that in the polar oceans less temperature-sensitive bacteria may be cosmopolitan and have a bipolar, even global, distribution at the species level. 相似文献
20.
The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics. 相似文献