共查询到20条相似文献，搜索用时 671 毫秒
1.
The 3D shear experiment over the Natih field in Oman: the effect of fracture-filling fluids on shear propagation 总被引：1，自引：0，他引：1
This is the final paper in a series on the 3D multicomponent seismic experiment in Oman. In this experiment a 3D data set was acquired using three-component geophones and with three source orientations. The data set will subsequently be referred to as the Natih 9C3D data set. We present, for the first time, evidence demonstrating that shear waves are sensitive to fluid type in fractured media. Two observations are examined from the Natih 9C3D data where regions of gas are characterized by slow shear-wave velocities. One is that the shear-wave splitting map of the Natih reservoir exhibits much larger splitting values over the gas cap on the reservoir. This increase in splitting results from a decrease in the slow shear-wave velocity which senses both the fractures and the fracture-filling fluid. Using a new effective-medium model, it was possible to generate a splitting map for the reservoir that is corrected for this fluid effect. Secondly, an anomaly was encountered on the shear-wave data directly above the reservoir. The thick Fiqa shale overburden exhibits a low shear-wave velocity anomaly that is accompanied by higher shear reflectivity and lower frequency content. No such effects are evident in the conventional P-wave data. This feature is interpreted as a gas chimney above the reservoir, a conclusion supported by both effective-medium modelling and the geology.
With this new effective-medium model, we show that introduction of gas into vertically fractured rock appears to decrease the velocity of shear waves (S2), polarized perpendicular to the fracture orientation, whilst leaving the vertical compressional-wave velocity largely unaffected. This conclusion has direct implications for seismic methods in exploration, appraisal and development of fractured reservoirs and suggests that here we should be utilizing S-wave data, as well as the conventional P-wave data, as a direct hydrocarbon indicator. 相似文献
With this new effective-medium model, we show that introduction of gas into vertically fractured rock appears to decrease the velocity of shear waves (S2), polarized perpendicular to the fracture orientation, whilst leaving the vertical compressional-wave velocity largely unaffected. This conclusion has direct implications for seismic methods in exploration, appraisal and development of fractured reservoirs and suggests that here we should be utilizing S-wave data, as well as the conventional P-wave data, as a direct hydrocarbon indicator. 相似文献
2.
J.H. Hake E.C.A. Gevers C.M. Van Der Kolk B.W. Tichelaar 《Geophysical Prospecting》1998,46(6):617-646
An experimental multicomponent three-dimensional (3D) seismic survey has been carried out over the Natih field in Oman. This paper describes the small-scale two-dimensional experiment carried out beforehand, and how the results obtained from this pilot were used to assess the feasibility of a nine-component three-dimensional (9C3D) operation as well as to determine the field parameters for the field-scale 3D survey. It also describes the two VSPs and a wireline shear log, acquired in conjunction with the pilot experiment, and the importance of such borehole data for establishing the correct time-to-depth relationship for the seismic data and for providing an independent check on the seismic interpretation. The observation of cusps in the offset VSP indicated the strong anisotropy of the Fiqa shales overlying the Natih reservoir. 相似文献
3.
Sonja Maultzsch Ramin Nawab Sung Yuh Muhammad Idrees Bernard Frignet 《Geophysical Prospecting》2009,57(2):263-274
We present the analysis of a multi-azimuth vertical seismic profiling data set that has been acquired in a tight gas field with the objective of characterizing fracture distributions using seismic anisotropy. We investigate different measurements of anisotropy, which are shear-wave splitting, P-wave traveltime anisotropy and azimuthal amplitude variation with offset. We find that for our field case shear-wave splitting is the most robust measure of azimuthal anisotropy, which is clearly observed over two distinct intervals in the target. We compare the results of the vertical seismic profiling analysis with other borehole data from the same well. Cross-dipole sonic and Formation MicroImager data from the reservoir section suggest that no open fractures intersect the well or are present within half a metre of the borehole wall. Furthermore, a detailed dispersion analysis of the sonic scanner data provides no indication of stress-induced seismic anisotropy along the logged borehole section. We therefore explain the azimuthal anisotropy measured in the vertical seismic profiling data with a model that contains discrete fracture corridors, which do not intersect the well itself but lie within the vertical seismic profiling investigation radius. We show that such a model can reproduce some basic characteristics of azimuthal anisotropy observed in the vertical seismic profiling data. The model is also consistent with well test data that suggest the presence of a fracture corridor away from the well. With this study we demonstrate the necessity of integrating different data types that investigate different scales of rock volume and can provide complementary information for understanding the characteristics of fracture networks in the subsurface. 相似文献
4.
O.H. Al‐Harrasi A. Al‐Anboori A. Wüstefeld J.‐M. Kendall 《Geophysical Prospecting》2011,59(2):227-243
The study of seismic anisotropy in exploration seismology is gaining interest as it provides valuable information about reservoir properties and stress directions. In this study we estimate anisotropy in a petroleum field in Oman using observations of shear‐wave splitting from microseismic data. The data set was recorded by arrays of borehole geophones deployed in five wells. We analyse nearly 3400 microearthquakes, yielding around 8500 shear‐wave splitting measurements. Stringent quality control reduces the number of reliable measurements to 325. Shear‐wave splitting modelling in a range of rock models is then used to guide the interpretation. The difference between the fast and slow shear‐wave velocities along the raypath in the field ranges between 0–10% and it is controlled both by lithology and proximity to the NE‐SW trending graben fault system that cuts the field formations. The anisotropy is interpreted in terms of aligned fractures or cracks superimposed on an intrinsic vertical transversely isotropic (VTI) rock fabric. The highest magnitudes of anisotropy are within the highly fractured uppermost unit of the Natih carbonate reservoir. Anisotropy decreases with depth, with the lowest magnitudes found in the deep part of the Natih carbonate formation. Moderate amounts of anisotropy are found in the shale cap rock. Anisotropy also varies laterally with the highest anisotropy occurring either side of the south‐eastern graben fault. The predominant fracture strikes, inferred from the fast shear‐wave polarizations, are consistent with the trends of the main faults (NE‐SW and NW‐SE). The majority of observations indicate subvertical fracture dip (>70° ). Cumulatively, these observations show how studies of shear‐wave splitting using microseismic data can be used to characterize fractures, important information for the exploitation of many reservoirs. 相似文献
5.
Gui-Hong Guo Jian-Ping Yan Zhi Zhang José Badal Jian-Wu Cheng Shuang-Hu Shi Ya-Wei Ma 《应用地球物理》2018,15(2):299-310
Elastic wave propagation and attenuation in porous rock layers with oriented sets of fractures, especially in carbonate reservoirs, are anisotropic owing to fracture sealing, fracture size, fracture density, filling fluid, and fracture strike orientation. To address this problem, we adopt the Chapman effective medium model and carry out numerical experiments to assess the variation in P-wave velocity and attenuation, and the shear-wave splitting anisotropy with the frequency and azimuth of the incident wave. The results suggest that velocity, attenuation, and anisotropy vary as function of azimuth and frequency. The azimuths of the minimum attenuation and maximum P-wave velocity are nearly coincident with the average strike of the two sets of open fractures. P-wave velocity is greater in sealed fractures than open fractures, whereas the attenuation of energy and anisotropy is stronger in open fractures than sealed fractures. For fractures of different sizes, the maximum velocity together with the minimum attenuation correspond to the average orientation of the fracture sets. Small fractures affect the wave propagation less. Azimuth-dependent anisotropy is low and varies more than the other attributes. Fracture density strongly affects the P-wave velocity, attenuation, and shear-wave anisotropy. The attenuation is more sensitive to the variation of fracture size than that of velocity and anisotropy. In the seismic frequency band, the effect of oil and gas saturation on attenuation is very different from that for brine saturation and varies weakly over azimuth. It is demonstrated that for two sets of fractures with the same density, the fast shear-wave polarization angle is almost linearly related with the orientation of one of the fracture sets. 相似文献
6.
Measurements of seismic anisotropy in fractured rock are used at present to deduce information about the fracture orientation and the spatial distribution of fracture intensity. Analysis of the data is based upon equivalent-medium theories that describe the elastic response of a rock containing cracks or fractures in the long-wavelength limit. Conventional models assume frequency independence and cannot distinguish between microcracks and macrofractures. The latter, however, control the fluid flow in many subsurface reservoirs. Therefore, the fracture size is essential information for reservoir engineers. In this study we apply a new equivalent-medium theory that models frequency-dependent anisotropy and is sensitive to the length scale of fractures. The model considers velocity dispersion and attenuation due to a squirt-flow mechanism at two different scales: the grain scale (microcracks and equant matrix porosity) and formation-scale fractures. The theory is first tested and calibrated against published laboratory data. Then we present the analysis and modelling of frequency-dependent shear-wave splitting in multicomponent VSP data from a tight gas reservoir. We invert for fracture density and fracture size from the frequency dependence of the time delay between split shear waves. The derived fracture length matches independent observations from borehole data. 相似文献
7.
Shear-wave splitting and reservoir crack characterization: the Coso geothermal field 总被引：1，自引：0，他引：1
Gordana Vlahovic Maya Elkibbi J.A Rial 《Journal of Volcanology and Geothermal Research》2003,120(1-2):123-140
This paper aims to improve current understanding of the subsurface fracture system in the Coso geothermal field, located in east-central California. The Coso reservoir is in active economic development, so that knowledge of the subsurface fracture system is of vital importance for an accurate evaluation of its geothermal potential and day-to-day production. To detect the geometry and density of fracture systems we applied the shear-wave splitting technique to a large number of high-quality seismograms from local microearthquakes recorded by a permanent, 16-station, down-hole, 3-component seismic array running at 480 samples/s. The analysis of shear-wave splitting (seismic birefringence) provides parameters directly related to the strike of the subsurface fractures and their density (number of cracks per unit volume), and, consequently, is an important technique to outline zones of high permeability. Three major fracture directions N10–30W, N0–20E, and N40–50E, of which the first and the second are the most prominent, were identified from the seismograms recorded by the 16-station down-hole array. All orientations are consistent with the known strike of local sets of faults and fractures in local wells and at the surface, as well as with previous analyses of seismic anisotropy in the region. The high quality of the recordings has allowed us to launch an unprecedented investigation into the characteristics of the temporal variations in crack polarization and crack density in a producing geothermal environment. Preliminary results point to significant temporal changes in shear-wave time delays, probably influenced by temporal changes in crack density within a period of 5 years (1996–2000). They are tentatively interpreted as due to a local 3% increase in shear-wave velocity in the southwestern part of the field during 1999. 相似文献
8.
利用中国地震科学台阵第一期(2011-01-2014-06)及部分中国地震科学台阵第二期(2013-02-2015-12)的流动地震台阵记录到的小震波形资料,运用剪切波分裂系统分析(SAM)方法,分析南北地震带的地壳各向异性,对剪切波分裂参数所反映的区域应力环境及构造特征,以及区域内主压应力方向与断裂分布的关系展开讨论.研究结果表明,南北地震带快剪切波偏振方向自北向南由NE向逐渐转变为NNW向,与南北地震带区域主压应力的方向变化具有一致性.区域内分布的大量NE及WNW或NW向断裂构造同样对快波偏振方向有比较大的影响,位于走滑断裂附近的台站,其快波方向与断裂走向大致平行,部分位于走滑断裂附近的台站其快波方向几乎垂直于断裂走向,而与构造应力场方向一致性较好.个别台站表现出复杂快波优势方向特征,反映出研究区内构造环境的复杂性.慢波时间延迟结果显示,南北地震带南段的平均时间延迟高于北段,反映了受印度板块和欧亚板块的碰撞挤压作用,南段地壳介质各向异性程度更大,构造变形更加剧烈.对比南北地震带上地幔各向异性特征,推测在川滇菱形块体内部可能存在复杂的壳幔耦合现象,地壳剪切波分裂除了反映区域应力特征,还可以揭示出区域构造信息. 相似文献
9.
Knowledge about the spatial distribution of the fracture density and the azimuthal fracture orientation can greatly help in optimizing production from fractured reservoirs. Frequency-dependent seismic velocity and attenuation anisotropy data contain information about the fractures present in the reservoir. In this study, we use the measurements of velocity and attenuation anisotropy data corresponding to different seismic frequencies and azimuths to infer information about the multiple fracture sets present in the reservoir. We consider a reservoir model with two sets of vertical fractures characterized by unknown azimuthal fracture orientations and fracture densities. Frequency-dependent seismic velocity and attenuation anisotropy data is computed using the effective viscoelastic stiffness tensor and solving the Christoffel equation. A Bayesian inversion method is then applied to measurements of velocity and attenuation anisotropy data corresponding to different seismic frequencies and azimuth to estimate the azimuthal fracture orientations and the fracture densities, as well as their uncertainties. Our numerical examples suggest that velocity anisotropy data alone cannot recover the unknown fracture parameters. However, an improved estimation of the unknown fracture parameters can be obtained by joint inversion of velocity and attenuation anisotropy data. 相似文献
10.
Shear-wave splitting is emerging as a useful exploration method for geothermal reservoirs as it can detect the geometry of the fracture system, the intensity of cracking and possibly, changes in fluid pressure within the reservoir. The method is based on the analyses of polarizations and time delays of shear-waves that have been distorted by the anisotropy of the medium through which the seismic waves have propagated. Observations of shear-wave splitting within the Krafla–Leirhnúkur geothermal field, Iceland, using a 20-station 3-component portable seismic array have provided evidence for at least two major crack systems of microfractures, oriented approximately N–S and E–W. Located microearthquakes align roughly along the E–W direction of the geothermal field, with shallow focal depths mostly around the injection well, probably related to the ongoing injection. This unexpected direction is however consistent with results from a simultaneous MT (magnetotelluric) survey. 相似文献
11.
Upper mantle anisotropy and crust-mantle deformation pattern beneath the Chinese mainland 总被引：5，自引：0，他引：5
WANG ChunYong CHANG LiJun DING ZhiFeng LIU QiongLin LIAO WuLin Lucy M FLESCH 《中国科学:地球科学(英文版)》2014,57(1):132-143
Over the past 10 years,the number of broadband seismic stations in China has increased significantly.The broadband seismic records contain information about shear-wave splitting which plays an important role in revealing the upper mantle anisotropy in the Chinese mainland.Based on teleseismic SKS and SKKS phases recorded in the seismic stations,we used the analytical method of minimum transverse energy to determine the fast wave polarization direction and delay time of shear-wave splitting.We also collected results of shear-wave splitting in China and the surrounding regions from previously published papers.From the combined dataset we formed a shear-wave splitting dataset containing 1020 parameter pairs.These splitting parameters reveal the complexity of the upper mantle anisotropy image.Our statistical analysis indicates stronger upper mantle anisotropy in the Chinese mainland,with an average shear-wave time delay of 0.95 s;the anisotropy in the western region is slightly larger(1.01 s)than in the eastern region(0.92 s).On a larger scale,the SKS splitting and surface deformation data in the Tibetan Plateau and the Tianshan region jointly support the lithospheric deformation mode,i.e.the crust-lithospheric mantle coherent deformation.In eastern China,the average fast-wave direction is approximately parallel to the direction of the absolute plate motion;thus,the upper mantle anisotropy can be attributed to the asthenospheric flow.The area from the Ordos block to the Sichuan Basin in central China is the transition zone of deformation modes between the east and the west regions,where the anisotropy images are more complicated,exhibiting"fossil"anisotropy and/or two-layer anisotropy.The collision between the Indian Plate and the Eurasian Plate is the main factor of upper mantle anisotropy in the western region of the Chinese mainland,while the upper mantle anisotropy in the eastern region is related to the subduction of the Pacific Plate and the Philippine Sea Plate beneath the Eurasian Plate. 相似文献
12.
Shear waves can provide valuable information about seismic anisotropy. On entering an anisotropic medium, a shear wave generally splits (shear-wave splitting) into a fast and a slow quasi-shear wave with polarizations fixed by the elastic properties of the medium and direction of travel. If the medium contains planar discontinuities with common normals, the fast shear wave will be suitably propagated if its polarization lies in the plane of the discontinuities. Measuring this polarization, using a VSP geometry with oriented three-component geophones in the borehole, offers the possibility of monitoring the orientation and density of the discontinuities as a function of depth. Such a shear-wave VSP was carried out in an uncased 0.3 m diameter borehole drilled to a depth of 120 m in the north of The Netherlands. The upper 80 m of the sequence, consisting of a glacial till and sands and clays of Pleistocene age, was studied. The clays in this sequence have been subjected to glacial deformation and as a result are overconsolidated and locally fissured. In our shallow VSP experiment, shear-wave splitting and therefore anisotropy was identified at various geophone depths for one source offset. Hodograms showed a consistent polarization of the fast shear-wave component over a large depth interval. Under the assumption that the anisotropy was caused by planar discontinuities with common normals, this polarization direction gives the strike of the fissures in this interval. The polarization direction of the fast S-wave did not correspond exactly with the strike which was obtained from geological information on the fissures. The geological information was from undisturbed oriented 70 mm core samples taken at 3 m intervals in the borehole. The discrepancy, however, could be explained in terms of dipping fissures, and such a dip was confirmed by the geological and geotechnical information. The orientation of fissures is an important factor in the directional deformation and strength characteristics of clays as far as geotechnical behaviour is concerned. This study thus illustrates a practical application of shear-wave splitting observed in shallow shear-wave VSP for geology and geotechnical engineering. 相似文献
13.
The ability to analyse shear-wave anisotropy in a mine environment is greatly aided by using multiple source orientations of a reproducible, impulsive shear-wave source. The analysis of what is probably the first controlled source shear-wave experiment in a mine environment demonstrates clearly that shear-wave polarizations and time delays between split shear-wave arrivals are reliably measured because of the use of multiple source orientations rather than a single shear-wave source. Reliability is further aided by modelling the shear-wave source radiation pattern, which allows for the unequivocal discrimination between seismic raypaths where shear-wave splitting did and did not occur. The analysis also demonstrates the great importance of high reproducibility of the seismic source for the use of shear waves in time-lapse surveys to monitor changes in a rockmass. 相似文献
14.
Xiang-Yang Li 《Geophysical Prospecting》1997,45(1):39-64
The characteristic seismic response to an aligned-fracture system is shear-wave splitting, where the polarizations, time-delays and amplitudes of the split shear waves are related to the orientation and intensity of the fracture system. This offers the possibility of delineating fractured reservoirs and optimizing the development of the reservoirs using shear-wave data. However, such applications require carefully controlled amplitude processing to recover properly and preserve the reflections from the target zone. Here, an approach to this problem is suggested and is illustrated with field data. The proposed amplitude processing sequence contains a combination of conventional and specific shear-wave processing procedures. Assuming a four-component recording (two orthogonal horizontal sources recorded by two orthogonal horizontal receivers), the split shear waves can be simulated by an effective eigensystem, and a linear-transform technique (LTT) can be used to separate the recorded vector wavefield into two principal scalar wavefields representing the fast and slow split shear waves. Conventional scalar processing methods, designed for processing P-waves, including noise reduction and stacking procedures may be adapted to process the separated scalar wavefields. An overburden operator is then derived from and applied to the post-stacked scalar wavefields. A four-component seismic survey with three horizontal wells drilled nearby was selected to illustrate the processing sequence. The field data show that vector wavefield decomposition and overburden correction are essential for recovering the reflection amplitude information in the target zone. The variations in oil production in the three horizontal wells can be correlated with the variations in shear-wave time-delays and amplitudes, and with the variations in the azimuth angle between the horizontal well and the shear-wave polarization. Dim spots in amplitude variations can be correlated with local fracture swarms encountered by the horizontal wells. This reveals the potential of shear waves for fractured reservoir delineation. 相似文献
15.
青藏高原东北缘由于受到多个构造块体的共同约束,表现出复杂的地球物理特性和地质特性,本文利用甘肃数字地震台网(2001-2008年)的观测资料,采用系统分析方法(SAM),进行地壳剪切波分裂分析,获得研究区内18个台站共1005条记录的剪切波分裂参数.研究结果表明,青藏高原东北缘介质各向异性在空间上存在差异,慢剪切波延迟时间表明了地壳介质各向异性的强弱变化特征,快剪切波平均偏振方向则反映了本区区域构造应力的空间变化特征.分析认为,祁连山-河西走廊活动构造区直接受青藏地块与阿拉善地块间相互作用,与青藏地块构造应力一致;甘东南活动构造区的应力环境主要受到内部活动断裂的共同作用,具有局部构造应力的特征. 相似文献
16.
P波通过裂缝地层传播时,其响应会随着地面观测方位的变化而变化,表现出明显的方位各向异性.这种随方位变化的裂缝响应信息(如振幅等)广泛存在于叠前方位一偏移距二维空间域中,检测此域中的裂缝响应,通过椭圆拟合的方法识别各向异性的存在,进而计算裂缝的方向——椭圆长轴的方向,和裂缝密度——椭圆长轴与短轴的比.本文研究出了一种基于常规叠前地震反射振幅来检测裂缝的三维叠前裂缝储层预测方法.它采用面元组合的方法扩大方位角和偏移距范围;采用多级数据控制技术获取所需的信息;采用稳妥的技术步骤来预测.通过大港油田实际工区的应用,结果表明本文研究出的方法技术应用效果好、精度高、经济实用. 相似文献
17.
The Shear-Wave Experiment at Atomic Energy of Canada Limited's Underground Research Laboratory was probably the first controlled-source shear-wave survey in a mine environment. Taking place in conjunction with the excavation of the Mine-by test tunnel at 420 m depth, the shear-wave experiment was designed to measure the in situ anisotropy of the rockmass and to use shear waves to observe excavation effects using the greatest variety of raypath directions of any in situ shear-wave survey to date. Inversion of the shear-wave polarizations shows that the anisotropy of the in situ rockmass is consistent with hexagonal symmetry with an approximate fabric orientation of strike 023° and dip 35°. The in situ anisotropy is probably due to microcracks with orientations governed by the in situ stress field and to mineral alignment within the weak gneissic layering. However, there is no unique interpretation as to the cause of the in situ anisotropy as the fabric orientation agrees approximately with both the orientation expected from extensive-dilatancy anisotropy and that of the gneissic layering. Eight raypaths with shear waves propagating wholly or almost wholly through granodiorite, rather than granite, do not show the expected shear-wave splitting and indicate a lower in situ anisotropy, which may be due to the finer grain size and/or the absence of gneissic layering within the granodiorite. These results suggest that shear waves may be used to determine crack and mineral orientations and for remote monitoring of a rockmass. This has potential applications in mining and waste monitoring. 相似文献
18.
青藏高原东北缘(94°E—105°E,32°N-40°N)是高原北东向扩张的前沿地带,亦是研究高原生长过程的重要区域.本文利用青海省数字地震台网(2008-2014年)共7年的地震目录和波形数据,首先使用双差定位获取精定位震源位置,在此基础上,挑选位于S波窗口内(射线入射角≤45°)的地震事件,依据S波分裂分析方法(SAM),获取研究区域内共26个台站的S波分裂参数.研究结果表明:地处多个块体交汇部位的西宁及其周缘,地壳各向异性呈现两个优势偏振方向,表明该区中上地壳应力环境由区域主压应力场和活动断层共同约束;玉树地震序列的地壳各向异性优势偏振方向与区域主压应力场一致. 相似文献
19.
A global optimization method incorporating a ray-tracing scheme is used to invert observations of shear-wave splitting from two near-offset VSPs recorded at the Conoco Borehole Test Facility, Kay County, Oklahoma. Inversion results suggest that the seismic anisotropy is due to a non-vertical fracture system. This interpretation is constrained by the VSP acquisition geometry for which two sources are employed along near diametrically opposite azimuths about the well heads. A correlation is noted between the time-delay variations between the fast and slow split shear waves and the sandstone formations. 相似文献
20.