共查询到20条相似文献，搜索用时 156 毫秒
1.
基于罗经/DVL/水声定位系统的水下组合导航方法研究 总被引：1，自引：0，他引：1
针对基于罗经/DVL航位推算系统位置误差积累的问题,研究基于罗经/DVL/水声定位系统的水下运载体组合导航定位方法,设计了组合导航方案,建立了基于航位推算系统的误差方程,在此基础上引入水声定位系统的位置量测信息,设计了卡尔曼滤波器,实现了罗经/DVL/水声定位系统的信息融合。最后对研究的方法进行了计算机仿真和半物理仿真实验。实验结果表明,该方法抑制了航位推算系统位置误差发散,且减小了水声定位数据波动幅度,实现了水下运载体的高精度导航定位。 相似文献
2.
由于海水介质对电磁波的强吸收屏蔽效应影响，水下潜航器的隐蔽航行使得对其进行水下导航定位成为一个难点和热点研究方向。现有水下导航与定位技术以惯性导航传统自主导航技术为主体，围绕修正惯性导航产生的累积误差问题，发展形成了航位推算导航、地球物理匹配导航技术、水声导航技术等多种辅助导航技术。系统地介绍了这些水下导航技术及其组合方式的基本原理、主要特点及研究进展，并对未来水下导航技术发展趋势和应用进行了展望。 相似文献
3.
水声网络已在海洋信息立体化获取、传输、感知领域中得到广泛研究和应用，水声网络节点的位置是水声网络协议设计、多样化应用中常常需要的重要信息。依托全球定位系统定位、采用常规水声定位技术获取水声网络节点位置等解决方案存在着无法直接水下应用、多节点需多次定位效率低、需要精确时间同步等问题。提出一种水声组网定位一体化方案，该方案利用水声网络运行过程中网络节点互联互通进行的交互可以直接通过应答测距方式进行节点位置解算，从而实现在不影响网络通信的情况下，无需精确同步的通信定位一体化功能。给出了系统组网通信、测距、定位、误差校正等核心环节的设计过程，设计了一套小规模水声网络通信定位试验系统，并开展湖试试验。湖试试验结果初步表明了该系统组网、定位一体化的有效性。 相似文献
4.
5.
6.
7.
在深海海洋油气资源勘探开发中,导航定位数据是各个测量参数的基准信息,测量载体的定位精度在一定程度上决定了其搭载的传感器探测精度。以COSL Explorer型深水自治式水下航行器为研究对象,分析其组合导航/定位系统的特点,得出包含超短基线水下定位、多普勒计程仪与惯性系统组合导航、海水中声速影响的深水自治式水下航行器导航/定位误差模型,并对该模型参数进行等误差剖面分析,得到该载体导航/定位误差分布趋势。并针对不同航速、不同定位斜距、不同时间间隔下的组合导航定位误差进行预报,为自主航行器在大海深、大范围工程勘察测量时参数设置提供理论依据。 相似文献
8.
谌启伟 《数字海洋与水下攻防》2019,2(5):29-34
根据黑匣子信标的特点，介绍了一种有针对性探测的黑匣子搜索定位设备的设计及实现过程。该黑匣子搜索定位设备采用剖面漂流浮标技术，通过加装水听器，实现对水下黑匣子信标信号进行区域定位和距离估算。发现目标后，自动上浮至水面，通过卫星将目标位置信息发往监控中心，实现目标快速搜索定位，节省人力物力，争取宝贵的搜索时间。通过原理样机的研制实现，经过相关的湖上验证试验表明，该型设备初步具备黑匣子探测能力。 相似文献
9.
《海洋技术学报》2014,(5)
为了得到海洋地球物理勘探作业中震源阵列位置定位问题的解决方案,文中对航行作业过程中的地震勘探船只拖带的震源阵列实时位置计算方法进行了研究。首先,介绍了基于激光定位系统和相对GPS定位系统的震源阵列定位方法。为了解决相对GPS定位系统输出的定位数据粗差剔除、时间同步等预处理问题,提出了一种基于滑动缓冲区的多项式拟合粗差剔除和数据同步处理算法,满足了粗差剔除要求。并利用该模型函数实现了震源阵列放炮时刻观测值的内插,进而实现了放炮时刻和定位时刻的数据同步。在此基础上,研究了震源阵列导航定位模型,提出了以单个枪体为对象的卡尔曼滤波模型来描述震源阵列的运动状态,以满足海洋地球物理勘探震源阵列定位的需要。 相似文献
10.
信道自身的复杂性和现场级试验的高投入、高风险限制了水声通信技术的发展。针对高效率水声通信技术研究的需求,提出1种水声通信半物理仿真平台水声通信半物理仿真平台(A Hardware-in-Loop Simulation Platform for Underwater Acoustic Communication)。水声通信半物理仿真平台以可配置水声Modem为核心,包括现场测试采集系统、算法仿真评估系统、算法实现装载系统、水声波形存储播放系统。基于建立的水声通信半物理仿真平台,进行水声直接序列扩频通信系统的半物理仿真研究,结果表明水声通信半物理仿真平台可有效提高水声通信技术的研究效率。 相似文献
11.
Currently, most submerged bodies use the long-baseline acoustic position system (LBL) to identify the navigation position for submerging. A precise navigation position is always the target pursued by underwater technology. The conventional long-baseline acoustic position systems normally use Kalman filter correction to handle the problem of positional errors. This article proposes a new modification, which is based on the periodically measured actual navigation distance, and associated with the three-dimensional geometrical relations between the transponder on the seabed and the navigation distance. This new modification employs the iterative approximation to modify the errors of the measured navigation position from the conventional long-baseline acoustic position system. In order to verify the availability of the modified model by the essay, the study uses the navigation position for an underwater surveying submerged body as the study object. After the numerical simulation analysis, the result shows that the modification was presented by the article can only use very few iterations to precisely modify the errors of the measured navigation position from the conventional long-baseline acoustic position system, which is highly applicable for positioning in long-term and long-distance submersion. Moreover, the modification method proposed by the paper can also help submersion positioning for the underwater vehicle, as well as the military submerged body. 相似文献
12.
13.
文中关注水下潜航器导航定位时,电磁波传播途径中能量衰减、惯导系统长航时积累误差以及提高水下潜航器定位精度等问题。基于倒置的超短基线声学基阵,分析声波往返传播时间(RTT)、平面波近似方法和USBL导航解算方法及其坐标转换过程,结合INS误差方程,建立INS/USBL松组合模型。为进一步提高系统精度、动态性能和抗干扰性,考察USBL的原始斜距、斜距差以及声学基阵的空间分布信息,提出基于USBL原始输出信息的INS/USBL紧耦合组合导航方法。通过MATLAB仿真对导航算法进行验证,结果表明两种算法能充分抑制纯惯导误差随时间积累问题,且有效地估计出姿态、速度和位置误差角;其中紧耦合方法状态估计误差最小,导航参数精度相对松组合提高30%以上,对于提高水下载体导航定位精度、海洋探测具有重大意义。 相似文献
14.
Underwater robot positioning and navigation achieve autonomous underwater robot movement based on the premise that positioning obtains the coordinates of the relative position of the underwater robot using a sensor, and navigation yields a known location to the destination path planning. Due to the location of an underwater robot and the complex and changing environment in which it operates, it is difficult to achieve precise positioning using the traditional positioning method. This paper systematically analyzes and summarizes several typical localization and navigation methods of underwater robots, such as multisensor information fusion technology, underwater acoustic localization and navigation methods, GPS buoy, underwater vision, SLAM and coordinate localization and navigation of multiple underwater robots. Multisensory information fusion technology integrates the advantages of the above methods, enhances the system stability and robustness, overcomes the disadvantages of traditional positioning and navigation, and enables the autonomous navigation and positioning of underwater robots. Underwater acoustics enable flexible and convenient positioning, whereas GPS can achieve high-precision and high-positioning navigation information, and visual positioning effectively overcomes the problem of error accumulation. Multirobot cooperative positioning resolves the problem of positioning failure caused by the collapse of a single system and completes complex tasks that cannot be completed by a single robot, thus enhancing the stability and robustness of the system. This paper systematically describes the realization of these methods, presents an actual analysis of their respective advantages and problems, and discusses the development of the field of research prospects and application prospects. 相似文献
15.
The purpose of the current study is to introduce a set of mobile underwater positioning systems (MUPS) that will enable non-offshore vessels to execute underwater missions. Besides mobility, the system would also possess the advantage of having to use fewer acoustic instruments than conventional acoustic positioning systems. The method adopted by the system will involve the use of expendable and multi-functional bathythermographs (XBT) to measure the underwater acoustic speed and the depth of water at the same time. Then it must utilize the geometric relations formed by measuring the position of underwater targets at set intervals during navigation. In addition, since sound does not travel in a straight line when underwater, the iteration and convergence method must be used to perform corrections on the transmission speed and positional errors to obtain an accurate coordinate of the underwater target. After simulation testing, the positioning system established by the current study has proven to be fast in converging the error values along with high positioning accuracy of the system. The results of the study indicate that the MUPS built by the research institute can be utilized on a vessel, and will be very helpful in assisting the management of urgent underwater positioning missions. 相似文献
16.
17.
Pan-Mook Lee Bong-Huan Jun Kihun Kim Jihong Lee Aoki T. Hyakudome T. 《Oceanic Engineering, IEEE Journal of》2007,32(2):327-345
This paper presents an integrated navigation system for underwater vehicles to improve the performance of a conventional inertial acoustic navigation system by introducing range measurement. The integrated navigation system is based on a strapdown inertial navigation system (SDINS) accompanying range sensor, Doppler velocity log (DVL), magnetic compass, and depth sensor. Two measurement models of the range sensor are derived and augmented to the inertial acoustic navigation system, respectively. A multirate extended Kalman filter (EKF) is adopted to propagate the error covariance with the inertial sensors, where the filter updates the measurement errors and the error covariance and corrects the system states when the external measurements are available. This paper demonstrates the improvement on the robustness and convergence of the integrated navigation system with range aiding (RA). This paper used experimental data obtained from a rotating arm test with a fish model to simulate the navigational performance. Strong points of the navigation system are the elimination of initial position errors and the robustness on the dropout of acoustic signals. The convergence speed and conditions of the initial error removal are examined with Monte Carlo simulation. In addition, numerical simulations are conducted with the six-degrees-of-freedom (6-DOF) equations of motion of an autonomous underwater vehicle (AUV) in a boustrophedon survey mode to illustrate the effectiveness of the integrated navigation system. 相似文献
18.
采用水下超短基线定位系统和捷联惯导系统组合对水下潜器进行导航时,未知的声速误差会严重影响组合导航的精度。顾及超短基线定位系统的噪声水平、阵列上接收单元的误差特性以及和捷联惯导系统在导航性能的互补性,基于平面波近似原理,建立了SINS/USBL紧组合系统的状态方程和量测方程,并对未改正的声速误差在线估计,提出一种超短基线定位系统和捷联惯导系统紧组合算法。新算法可以将非高斯的未知声速误差进行建模后进行估计,有效提高了捷联惯导系统的误差估计性能。仿真实验结果表明,新算法能有效估计未知声速误差,滤波收敛后的精度明显优于松组合方案,具有很强的实用性。 相似文献
19.
A novel self-contained navigation system has been devised for underwater vehicles operating in and around offshore installations. This system matches data from a sector-scanning sonar device to a computer model of the installation. The paper begins by highlighting the existing approaches to subsea navigation before outlining the main features of the proposed system. It then concentrates on a key component of this system which is a method for calculating the position and heading of an underwater vehicle navigating in the vincinity of tubular steel structures. An iterative solution method is presented which incorporates six degree of freedom vehicle motions and this is verified in a series of laboratory experiments with various arrangements of structural members and using a commercial sonar device. The key features, applications and performance of this method are discussed. The main conclusion is that the proposed method for calculating the position and heading of an underwater vehicle contributes towards achieving an accurate and reliable subsea navigation capability. 相似文献
20.
水声导航、定位技术发展趋势 总被引：1，自引：0，他引：1
水声导航、定位技术在海洋科学和海洋工程中有着广泛的应用,近年来已逐渐向高精度、多传感器、多手段融合的方向发展.本文以导航、定位声纳的发展为关注对象,概述了水声导航、定位技术在技术前沿上的发展状况,提炼出其技术发展趋势,并介绍了水声导航、定位技术的应用前景. 相似文献