共查询到20条相似文献，搜索用时 109 毫秒
1.
供水管道的震害主要原因是强烈的地面运动或场地失效以及管材、管径尺度等因素的影响。因此,将管道细分为单元,并分别考虑主要因素是强烈的地面运动或场地失效对单元的震害影响,建立相应的震害预测模型;单元综合震害以及由单元组成的管道体系的震害,则采用综合概率法进行预测。用GIS空间分析技术,依据用户指定的单元划分原则进行多因素单元自动划分,将有助于提高震害预测的自动化水平和预测效率。另外主要介绍了供水管道的单元震害预测模型和综合概率预测模型;叙述了在GIS环境下管道数据管理与查询、地图显示、预测单元自动划分、预测结果的显示输出等功能设计。 相似文献
2.
叙述了地震时埋地管道可能遭受的破坏形式、影响管道震害的因素及破坏等级的划分。论述了用模糊数学法进行埋地管线震害预测的方法和步骤，利用这一方法对忻州市供水管网主干线进行了震害预测，给出了在地震烈度Ⅶ度～Ⅸ度作用下的震害预测结果。 相似文献
3.
架空管道震害预测实用方法的研究 总被引：1，自引：0，他引：1
根据震害调查分析和试验研究结果,建立了由环境因素和管道结构参数组成的,对架空管道震害预测进行二级多因素模糊综合评判的方法。文中给出了计算、评价构成二级评判因素地震烈度、场地类型、工作状态和结构种类各档次正态模糊数范数ａｋ的参数和对实际情况如何确定的方法。本文为面广量大的已建架空管道的震害预测工作提供了一套科学性强,方便实用的计算方法。 相似文献
4.
本文根据规范给出的地下管道分析模型,并采用随机动力可靠性分析方法,对地震波作用下的管道进行简化计算,对沈阳市地下管道进行分析预测,并给出在不同地震作用下的预测结果。 相似文献
5.
地下管道震害预测实用方法的研究 总被引：2，自引：2，他引：2
本文根据震害调查分析和试验研究结果，建立了由环境因素和管道结构参对地下管道震害进行二级多因素模型综合评判的方法，文中给出了计算，评价构成二级评判因素地震烈，场地类型，工作状态和结构种类正态模糊范数ak的方法，并在地下管道震害关联分析和试验基础上，给出了二级模糊评判的权向量，本文为面广量大的已那建下管道的震害预测工作提供了一套方便实用的计算方法。 相似文献
6.
7.
海洋地震频繁且海底土体环境复杂,当地震导致断层土体发生永久变形后,穿越断层的海底埋地管道也将受迫发生变形。为确定变形后的管道能否正常工作,需根据实际工况对其进行应变响应预测。首先通过有限元计算软件ABAQUS建立管道与走滑断层的三维实体模型,模拟管-土间的接触作用并通过等效边界方法修正模型,得到管道局部屈曲破坏形式及应变分布情况。然后,通过调整有限元模型参数对断层交角、管道工作内压、管道径厚比对管道极限塑性应变的影响进行敏感性分析,定性分析不同敏感性因素对穿越走滑断层海底管道应变响应的影响。最后,在数值模拟数据的基础上通过MATLAB软件利用基于遗传算法优化的BP神经网络实现对管道应变响应的精确预测。结果表明:穿越走滑断层管道在发生局部屈曲时,可根据轴向压缩应变突变现象确定管道局部屈曲时对应的断层位移,并且断层交角、管道工作内压和管道径厚比都会对跨断层管道应变响应产生影响。 相似文献
8.
地震作用下土体发生液化之后,由于超静孔隙水压力的产生和土体抗剪强度的降低,管道易发生上浮破坏。为研究管道上浮动力反应的影响因素,基于OpenSees有限元软件,通过目标反应谱和谱匹配等方法选取地震波,考虑不同管土特性和地震动特性,对地震作用下管道上浮动力反应进行了二维数值模拟。结果表明:土体相对密度、管径和管道埋深对管道上浮反应的影响较大,分别给出了土体相对密度、管径、管道埋深对管道上浮位移的影响规律及对应拟合公式;长持时地震动作用下,超静孔隙水压力消散较慢,管道上浮位移可达短持时地震动作用下管道上浮位移的2倍左右;近断层脉冲地震动作用下,管道上浮破坏和横向破坏两种破坏模式同时存在,且由于速度脉冲效应,管道横向破坏风险大于上浮破坏风险。 相似文献
9.
基于ABAQUS软件平台,建立穿越断层的管道、有压液体及周围土体的三维有限元模型,分别在静力荷载作用和地震作用下,对不同运动形式断层（走滑断层、正断层、逆断层）中的管道进行模拟,并对管道内有无有压液体进行对比分析。分别得到管道在静力荷载作用下和地震作用下空管道与有压管道的变形特征,将其进行对比分析,得到管道内液体的质量和压力在静力荷载作用及地震荷载作用下对管道的不同影响。结果表明：在静力荷载作用下管道内液体的质量和压力提高了管道的抗变形能力,使管道更安全;而在地震作用下管道内液体的质量和压力削弱了管道的抗变形能力,使管道更容易被破坏。 相似文献
10.
以天津开发区的铸铁给水管道为例,较详细地讨论了铸铁管内锈垢产生的四种原因,提出了防锈蚀的效措施。同时给出了６￣１０度地震裂度下管道震害的预测结果和提高管道抗震能力的建议。 相似文献
11.
The 1995 Hyogoken–Nambu earthquake caused severe liquefaction over wide areas of reclaimed land. Furthermore, the liquefaction induced large ground displacement in horizontal directions, which caused serious damage to foundations of structures. However, few analyses of steel pipe piles based on field investigation have so far been conducted to identify the causes and process of such damage. The authors conducted a soil–pile-structure interaction analysis by applying a multi-lumped-mass-spring model to a steel pipe pile foundation structure to evaluate the causes and process of its damage. The damage process analyzed in the time domain corresponded well with the results of detailed field investigation. It was found that a large bending moment beyond the ultimate plastic moment of the pile foundation structure was induced mainly by the large ground displacement caused by liquefaction before lateral spreading of the ground and that the displacement appeared during the accumulating process of the excess pore water pressure. 相似文献
12.
During the 1999 Chi-Chi, Taiwan earthquake, many sand boiling phenomena were observed in central Taiwan, which caused severe ground settlement and structure damages. According to the installed accelerograms, the peak ground surface horizontal accelerations in the liquefaction-affected areas range from 774.42 to 121.3 gal. The writers carried out an extensive investigation of soil liquefaction in this earthquake. In this paper, we present results of the CPT exploration and post-earthquake liquefaction analysis. Two hundred and seventy five (275) cone penetration test data were collected from the liquefaction-affected areas, and 46 liquefaction case histories and 88 non-liquefaction case histories were derived that can be used to evaluate the accuracy of existing liquefaction evaluation models. In addition, the strength of the liquefied soils after earthquake and the implication of its liquefaction potential in the future event are discussed. 相似文献
13.
This paper investigates the effect of nature of the earthquake on the assessment of liquefaction potential of a soil deposit during earthquake loading. Here, the nature of the earthquake is included via the parameter V, the ‘pseudo-velocity’, that is the gross area under the acceleration record of the earthquake at any depth below the ground surface. By analysing a number of earthquake records from different parts of the world, a simple method has been outlined to assess the liquefaction potential of a soil deposit based on the pseudo-velocity. For many earthquakes occurred in the past, acceleration records are available or can be computed at the ground level or some other depth below the ground surface. Therefore, this method is a useful tool at the preliminary design stage to determine the liquefaction potential before going into a detailed analysis. Validation of the method is carried out using a database of case histories consisting of standard penetration test values, acceleration records at the ground surface and field observations of liquefaction/non-liquefaction. It can be seen that the proposed method has the ability to predict soil liquefaction potential accurately, despite its simplicity. 相似文献
14.
Permanent earthquake‐induced actions in buried pipelines: Numerical modeling and experimental verification 
下载免费PDF全文
下载免费PDF全文 《地震工程与结构动力学》2018,47(4):966-987
Buried pipelines are often constructed in seismic and other geohazard areas, where severe ground deformations may induce severe strains in the pipeline. Calculation of those strains is essential for assessing pipeline integrity, and therefore, the development of efficient models accounting for soil‐pipe interaction is required. The present paper is aiming at developing efficient tools for calculating ground‐induced deformation on buried pipelines, often triggered by earthquake action, in the form of fault rupture, liquefaction‐induced lateral spreading, soil subsidence, or landslide. Soil‐pipe interaction is investigated by using advanced numerical tools, which employ solid elements for the soil, shell elements for the pipe, and account for soil‐pipe interaction, supported by large‐scale experiments. Soil‐pipe interaction in axial and transverse directions is evaluated first, using results from special‐purpose experiments and finite element simulations. The comparison between experimental and numerical results offers valuable information on key material parameters, necessary for accurate simulation of soil‐pipe interaction. Furthermore, reference is made to relevant provisions of design recommendations. Using the finite element models, calibrated from these experiments, pipeline performance at seismic‐fault crossings is analyzed, emphasizing on soil‐pipe interaction effects in the axial direction. The second part refers to full‐scale experiments, performed on a unique testing device. These experiments are modeled with the finite element tools to verify their efficiency in simulating soil‐pipe response under landslide or strike‐slip fault movement. The large‐scale experimental results compare very well with the numerical predictions, verifying the capability of the finite element models for accurate prediction of pipeline response under permanent earthquake‐induced ground deformations. 相似文献
15.
Nadarajah Ravichandran Brian Machmer Hadakopan Krishnapillai Kimiro Meguro 《Soil Dynamics and Earthquake Engineering》2010
Liquefaction induced damage to the built environment is one of the major causes of damage in an earthquake. Since Niigata earthquake in 1964, it has been popularly recognized that the liquefaction induced ground failures caused severe damage in various forms such as sand boiling, ground settlement, lateral spreading, landslide, etc. Since then, understanding the mechanism of liquefaction phenomena became very important to take measures against the liquefaction induced ground failures. To understand the mechanism of liquefaction, it is important to consider the soil as an assemblage of particles. A continuum approach may fail to explain some of the phenomena associated with liquefaction. Discrete approach, such as distinct/discrete element method (DEM), is an effective method that can simulate the mechanism of liquefaction and associated phenomena well at the microscopic level. 相似文献
16.
17.
A seismic-geological disaster can obviously affect an engineering site in three aspects:the first is ground faulting caused by the earthquake;the second is strong ground motion;the third is geological disasters such as landslides,mud-rock flows and liquefaction.Through the case study of selection of the huge transformer substation in the Shimian region of Sichuan Province,this paper proposes that the activity pattern and spatial distribution of faults near the site are crucial factors for evaluating the seismic-geological conditions for the location of huge transformer substations. 相似文献
18.
Liquefaction macrophenomena in the great Wenchuan earthquake 总被引：3，自引：2，他引：1
Longwei Chen Xiaoming Yuan Zhenzhong Cao Longqing Hou Rui Sun Lin Dong Weiming Wang Fanchao Meng Hongjuan Chen 《地震工程与工程振动(英文版)》2009,8(2):219-229
On May 12, 2008 at 14:28, a catastrophic magnitude M 8.0 earthquake struck the Sichuan Province of China.The epicenter was located at Wenchuan (31.00°N, 103.40°E). Liquefaction macrophenomena and corresponding destruction was observed throughout a vast area of 500 km long and 200 km wide following the earthquake. This paper illustrates the geographic distribution of the liquefaction and the relationship between liquefaction behavior and seismic intensity, and summarizes the liquefaction macrophenomena, including sandboils and waterspouts, ground subsidence, ground fissures etc., and relevant liquefaction features. A brief summary of the structural damage caused by liquefaction is presented and discussed. Based on comparisons with liquefaction phenomena observed in the 1976 Tangshan and 1975 Haicheng earthquakes, preliminary analyses were performed, which revealed some new features of liquefaction behavior and associated issues arising from this event. The site investigation indicated that the spatial non-uniformity of liquefaction distribution was obvious and most of the liquefied sites were located in regions of seismic intensity Ⅷ. However, liquefaction phenomena at ten different sites in regions of seismic intensity Ⅵ were also observed for the first time in China mainland. Sandboils and waterspouts ranged from centimeters to tens of meters, with most between 1 m to 3 m. Dramatically high water/sand ejections,e.g., more than 10 m, were observed at four different sites. The sand ejections included silty sand, fine sand, medium sand,course sand and gravel, but the ejected sand amount was less than that in the 1976 Tangshan earthquake. Possible liquefaction of natural gravel soils was observed for the first time in China mainland. 相似文献
19.
在对2013年4月20日芦山MS7.0地震灾区大量地震地质灾害实地考察及调查的基础上, 总结了滑坡、 崩塌、 砂土液化、 地裂缝、 地表变形等地震地质灾害的分布及发育特点, 探讨了地震地质灾害与发震断裂之间的关系. 极震区和重灾区的崩塌和滑坡特别严重, 是地震巨大破坏作用的外在表现形式; 砂土液化点较少, 分布范围和规模有限; 地裂缝和地表变形并非真正意义上的地震地表破裂带. 根据极震区和重灾区地震地质灾害的分布和发育特点, 认为芦山地震最有可能的发震断裂为龙门山前山断裂的双石—大川断裂, 也有可能是龙门山山前隐伏断裂的大邑断裂, 还有可能是双石—大川断裂与大邑断裂两者共同触发的结果. 相似文献
20.
以一多层框架结构停车场的地基基础为研究对象,分析其在将来可能发生大地震中的动力特性。除地基可能出现的液化,还包括地震中的瞬时沉降及地震后地基长期固结沉降,尤其是不均匀沉降。采用水土耦合2维有限元分析法,对研究领域的地基基础及上部结构进行整体建模。计算中采用的地震波为一三连动人工地震波,最大加速度为182gal,主震持续150s。为比较不同的基础形式对地基液化和沉降的影响,对采用长桩和密集型短柱两种基础形式做分析比较。有限元计算中,采用能反映其地层土交变移动特性的弹塑性本构模型来描述土的动力学特性,桩基础和上部框架结构采用梁单元模型,密集型短柱基础采用弹性单元模型。结果表明,除地震中地基的液化,震后随着超孔隙水压的消散,地基基础长期不均匀沉降也是不可忽略的重要问题。 相似文献