共查询到20条相似文献，搜索用时 76 毫秒
1.
The purpose of the present paper is to clarify the effects of permeability and initial heterogeneity on the strain localization of fluid‐saturated cohesive soil modelled by a strain gradient‐dependent poro‐viscoplastic constitutive model. The effects of permeability and gradient parameters on the growth rate of the fluctuation were obtained by a linear instability analysis. Deformation behaviour of clay specimens modelled as a viscoplastic model with a second order strain gradient during shear was numerically analysed by a soil–water coupled FEM under both globally undrained and partially drained conditions. It was found that the deformation pattern and the stress–strain curve greatly depend on the permeability, the drainage conditions and the initial non‐homogeneous properties. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
2.
Modelling shear band is an important problem in analysing failure of earth structures in soil mechanics. Shear banding is the result of localization of deformation in soil masses. Most finite element schemes are unable to model discrete shear band formation and propagation due to the difficulties in modelling strain and displacement discontinuities. In this paper, a framework to generate shear band elements automatically and continuously is developed. The propagating shear band is modelled using discrete shear band elements by splitting the original finite element mesh. The location or orientation of the shear band is not predetermined in the original finite element mesh. Based on the elasto‐perfect plasticity with an associated flow rule, empirical bifurcation and location criteria are proposed which make band propagation as realistic as possible. Using the Mohr–Coulomb material model, various results from numerical simulations of biaxial tests and passive earth pressure problems have shown that the proposed framework is able to display actual patterns of shear banding in geomaterials. In the numerical examples, the occurrence of multiple shear bands in biaxial test and in the passive earth pressure problem is confirmed by field and laboratory observations. The effects of mesh density and mesh alignment on the shear band patterns and limit loads are also investigated. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
3.
M. A. Hicks 《国际地质力学数值与分析法杂志》2000,24(5):453-476
An adaptive mesh refinement algorithm has been developed for non‐linear computations in geomechanics, based on a smoothed stress–strain finite element formulation. This uses estimates of error in the incremental shear strain invariant to guide the regeneration of unstructured meshes at regular intervals during loading. Following each mesh‐update, no re‐analysis of previous increments with the new mesh is necessary. Algorithm performance has been investigated by analysing a passive earth pressure problem using a linear elastic‐perfectly plastic Mohr–Coulomb soil model. Perfectly drained behaviour has been considered, as have partially drained situations using hydromechanical coupling, while undrained behaviour has been approximated using time steps close to zero. In all cases, mesh adaptivity has been successful in capturing regions of high strain gradient. The results have been compared with analytical solutions. Accurate computations of limit load and shear band orientation have been obtained for a wide range of material dilation angles. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
4.
Geotechnical experiments show that Lode angle‐dependent constitutive formulations are appropriate to describe the failure of geomaterials. In the present study, we have adopted one such class of failure criteria along with a versatile constitutive relationship to theoretically analyze the effects of Lode angle on localized shear deformation or shear band formation in loose sand for both drained and undrained conditions. We determine the variation in the possible stress states for shear localization due to the introduction of Lode angle by considering the localized deformation as a bifurcation problem. Further, similar bifurcation analysis is performed for the stress states along a specific loading path, namely, plane strain compression at the constitutive level. In addition, the plane strain compression tests have been simulated as a boundary value finite element problem to see how Lode angle affects the post‐localization response. Results show that the inclusion of a Lode angle parameter within the failure criterion has considerable effects on the onset, plastic strain, and propagation of shear localization in loose sand specimens. For drained condition, we notice early inception of shear localization and multiple band formation when the Lode angle‐dependent failure criterion is used. Undrained localization characteristics, however, found to be independent of Lode angle consideration. 相似文献
5.
Strain localization developing inside soft rock specimens is examined through experimental observation and numerical simulation. In the experimental study, soft rock specimens are sheared at different strain rates under plane strain conditions and deformation and strain localization characteristics are analysed. Transition of localization mode from highly localized mode for higher strain rate to distributed and diffused mode of strain localization for lower strain rates was observed. In the numerical study, simulations of plane strain compression tests are carried out at different strain rates by using an overstressed‐type elasto‐viscoplastic model in finite element computations. The role of strain rates on setting gradients of strain fields across shear band is clarified. The probable mechanism for transition of localization mode is discussed. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
6.
7.
The aim of the present paper is to numerically analyse the behaviour of frozen sand by using a viscoplastic constitutive model with strain softening. A constitutive model has been developed introducing the stress history tensor which is a functional of the stress history, with respect to a generalized time measure. It is shown that Adachi and Oka's model is applicable to the results of triaxial tests on a frozen Toyoura sand at different strain rates. First, the instability of the model is discussed within the framework of bifurcation theory. The model is then implemented into a FEM code to numerically simulate the behaviour under plane strain conditions. From the numerical results, it is revealed that the formation of shear bands is possible and the characteristics of strain localization, such as shear banding, depend on the strain rates. 相似文献
8.
The appearance of shear banding in granular materials has been investigated intensively during the last decades and is still of ongoing importance in terms of understanding the stress–strain behaviour of the material, the localization phenomena and the interaction between soil and structure. Only less attention has been paid to the occurrence of systems of shear bands although such systems can be identified in geotechnical structures as well as in geological formations. In this paper we present results of experiments on sand specimens under extensional load in natural gravity as well as in increased gravity in the centrifuge where the influence of the stress level on the geometry of a shear band pattern, specified by the spacing of the shear bands and the angle between failure surfaces and minor stress direction, has been investigated. X‐ray technique has been used to visualize the failure zones inside the specimen, an optical measurement system called Digital Image Correlation has been applied to identify and observe the appearing deformation mechanism on the sides of the specimens in natural gravity as well as during the flight in the centrifuge. It can be shown that the geometry of the shear band pattern is sparsely influenced by the change of the stress level. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
9.
Undrained deformation of dilative sand generates negative excess pore pressure. It enhances the strength, which is called dilative hardening. This increased suction is not permanent. The heterogeneity at the grain scale triggers localisations causing local volume changes. The negative hydraulic gradient drives fluid into dilating shear zones. It loosens the soil and diminishes the shear strength. It is essential to understand the mechanism behind this internal drainage and to capture it numerically. The purpose of this paper is to develop a macroscopic constitutive relationship for the undrained deformation of saturated dense sand in the presence of a locally fully or partially drained shear band. Separate constitutive relations are generated for the band and intact material. Both time and scale dependence during pore fluid diffusion in saturated sand are captured, eliminating the mesh dependency for finite element implementations. The model is applied to the Gauss points that satisfy the bifurcation criterion. The proposed method is calibrated to recreate the undrained macroscopic response bestowed by an extra-small mesh. The microscopic behaviours inside and outside shear band predicted by this model are qualitatively in good agreement with individual material point behaviours inside and outside the shear band in the extra-small mesh. Depending on the loading rate and the shear band thickness, the response inside the band can be fully or partially drained, which governs the ultimate global strength. The calibrated model is exploited to simulate an upscaled biaxial compression test with semipermeable boundaries. 相似文献
10.
Thermoplasticity and strain localization in transversely isotropic materials based on anisotropic critical state plasticity 
下载免费PDF全文
下载免费PDF全文 Geomaterials such as soils and rocks are inherently anisotropic and sensitive to temperature changes caused by various internal and external processes. They are also susceptible to strain localization in the form of shear bands when subjected to critical loads. We present a thermoplastic framework for modeling coupled thermomechanical response and for predicting the inception of a shear band in a transversely isotropic material using the general framework of critical state plasticity and the specific framework of an anisotropic modified Cam–Clay model. The formulation incorporates anisotropy in both elastic and plastic responses under the assumption of infinitesimal deformation. The model is first calibrated using experimental data from triaxial tests to demonstrate its capability in capturing anisotropy in the mechanical response. Subsequently, stress‐point simulations of strain localization are carried out under two different conditions, namely, isothermal localization and adiabatic localization. The adiabatic formulation investigates the effect of temperature on localization via thermomechanical coupling. Numerical simulations are presented to demonstrate the important role of anisotropy, hardening, and thermal softening on strain localization inception and orientation. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
11.
Conditions for localization of deformation into a planar (shear) band in the incremental response of elastic–plastic saturated porous media are derived in the case of small strains and rotations. The critical modulus for localization of both undrained and drained conditions are given in terms of the discontinuous bifurcation analysis of the problem. Loss of uniqueness of the response of coupled problems is investigated by means of positiveness of the second‐order work density. From the discussion of drained conditions, it is shown that there are two critical hardening moduli, i.e. lower and upper hardening moduli which, respectively, correspond to single phase material (large permeability) and to undrained conditions (small permeability). In analogy to one‐dimensional results, it is shown that there exists a domain of permeability values where we have loss of stability, but the waves can still propagate. In this domain finite element results do not show pathological mesh dependence, and permeability will play the role of an internal length parameter in dynamic models. The length scale prediction is thus given for multi‐dimensional problems. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
12.
Numerical studies of shear banding in interface shear tests using a new strain calculation method 总被引：1，自引：0，他引：1
Strain localization is closely associated with the stress–strain behaviour of an interphase system subject to quasi‐static direct interface shear, especially after peak stress state is reached. This behaviour is important because it is closely related to deformations experienced by geotechnical composite structures. This paper presents a study using two‐dimensional discrete element method (DEM) simulations on the strain localization of an idealized interphase system composed of densely packed spherical particles in contact with rough manufactured surfaces. The manufactured surface is made up of regular or irregular triangular asperities with varying slopes. A new simple method of strain calculation is used in this study to generate strain field inside a simulated direct interface shear box. This method accounts for particle rotation and captures strain localization features at high resolution. Results show that strain localization begins with the onset of non‐linear stress–strain behaviour. A distinct but discontinuous shear band emerges above the rough surface just before the peak stress state, which becomes more expansive and coherent with post‐peak strain softening. It is found that the shear bands developed by surfaces with smaller roughness are much thinner than those developed by surfaces with greater roughness. The maximum thickness of the intense shear zone is observed to be about 8–10 median particle diameters. The shear band orientations, which are mainly dominated by the rough boundary surface, are parallel with the zero extension direction, which are horizontally oriented. Published in 2007 by John Wiley & Sons, Ltd. 相似文献
13.
不同应力路径下剪切带的数值模拟 总被引：4，自引：1，他引：3
采用回映应力更新算法,编写了基于伏斯列夫面的超固结黏土本构关系模型子程序,嵌入非线性有限元软件ABAQUS。通过对单元试验进行三轴压缩、三轴伸长及平面应变等问题的模型预测,再现了超固结黏土在不同初始超固结比和应力路径时的变形和强度特性,从而验证了子程序的正确性。借助该本构模型,对三轴压缩、三轴伸长及平面应变应力路径下超固结黏土体变形局部化问题,进行了三维数值模拟。分析结果表明：超固结黏土在三轴压缩及伸长状态时,土体变形局部化在应力-应变关系软化时出现,而平面应变状态时,在应力-应变关系硬化阶段出现,其超固结黏土的剪胀特性在剪切带的形成过程中起重要作用。 相似文献
14.
The analysis of three cataclastic band sets from Provence (France) reveals that the band density, their conjugate angles, their ratio of shear displacement to compaction, and the amount of cataclasis within the bands differ and can be expressed as functions of tectonic setting and petrophysical properties. We identify (1) a dense and closely spaced network of shear-enhanced (reverse) compaction bands; (2) a regularly spaced less dense network of reverse compactional shear bands; and (3) a localized network of normal shear bands. The field data show that strain localization is favored in an extensional regime and is characterized by shear bands with a large shear to compaction ratio and a small conjugate band angle. In contrast, distributed strain is favored in a contractional regime and is characterized by compactional bands with a low ratio of shear to compaction and a large conjugate band angle. To explain the mechanical origin of this strain localization, we quantify the yield strength and the stress evolution in extensional and contractional regimes in a frictional porous granular material. We propose a model of strain localization in porous sands as a function of tectonic stresses, burial depth, material properties, strain hardening and fluid pressure. Our model suggests that stress reduction, inherent to extensional regime, favors strain localization as shear bands, whereas stress increase during contraction favors development of compactional bands. 相似文献
15.
基于梯度塑性本构理论的岩样侧向变形分析(Ⅰ):基本理论及本构参数对侧向变形的影响 总被引：13，自引：5，他引：13
研究了岩样在单轴压缩条件下轴向应力．侧向或环向变形的全程曲线特征。基于考虑峰值剪切强度后微小结构之间相互影响和作用的梯度塑性理论，得到了由于剪切局部化而引起的侧向塑性变形。利用虎克定律描述了试件的弹性变形，得到了轴向应力．侧向变形全程曲线的解析解。在软化阶段，试件中部侧向变形及对靠近试件上端或下端部位的侧向变形并不相同。与轴向应力．应变曲线可能出现的回跳现象类似。试件中部轴向应力．侧向应变曲线也可能出现回跳现象。在应变软化阶段，与应力．侧向应变曲线相比，应力．环向应变曲线不容易发生回跳现象。若在试件内部出现多条剪切带，则应该以等效剪切带宽度替代本文中的剪切带宽度。随着剪切带倾角、内部长度参数的降低、剪切模量的增加及弹性模量的降低，轴向应力．侧向应变曲线越陡；甚至能出现弹性回跳。 相似文献
16.
Closed‐loop, servo‐controlled experiments were conducted to investigate the development of a shear band in Berea sandstone at various confining pressures. The tests were performed with the University of Minnesota Plane‐Strain Apparatus, which was designed to allow the shear band to develop in an unrestricted manner. Measured load and displacements provided estimates of the stress and deformation states whereby dilatancy and friction were evaluated prior to localization. Experiments were stopped at various stages of shear‐band development within the strain‐softening regime. The specimens displayed a progression of deformation from inception, where the shear band was characterized by a high density of intragranular microcracks and crushed grains, to the tip where the intragranular microcracks were significantly less dense and separated by intact grains. Decreased slip deformation towards the tip of the shear band indicated that localization developed and propagated in plane. Thin‐section microscopy showed porosity increase within the shear band was 3–4 grain diameters wide. Increased porosity did not extend beyond the tip of the shear band. A cohesive zone model of shear fracture, used to examine the stress field near the tip, showed similarities to principal compressive stress orientations interpreted from intragranular microcracks. Thus, propagation of the shear band could be associated with in‐plane mode II fracture. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
17.
Numerous constitutive models built on coaxial theory and validated under axi‐symmetric condition often describe the stress–stain relationships and predict the inceptions of shear banding in sands inaccurately under true triaxial condition. By adopting an elaborated Mohr–Coulomb yield function and using non‐coaxial non‐associated flow rule, a 3D non‐coaxial elasto‐plasticity model is proposed and validated by a series of true triaxial tests on loose sands. The bifurcation analysis of true triaxial tests on dense sands predicts the influence of the intermediate principal stress ratio on the onset of shear band accurately. The failure of soils is shown to be related to the formation of shear band under most intermediate principal stress ratio conditions except for those which are close to the axi‐symmetric compression condition. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
18.
19.
循环围压对饱和软黏土永久变形的影响 总被引：1，自引：0，他引：1
通过对温州典型饱和软黏土进行一系列不同应力路径下的部分排水循环动三轴试验,研究了部分排水条件下循环围压对饱和软黏土变形特性的影响。试验结果表明：部分排水条件下,与常规的围压保持恒定,偏应力单独循环作用下的三轴试验结果相比,循环围压的存在对饱和软黏土的永久体应变和永久轴向应变均产生了的显著的影响。在相同循环应力比和循环次数下,试样的永久体应变和永久轴向应变均随着循环围压幅值的增大而增大,说明常规的恒定围压循环三轴试验会低估高速交通荷载作用下路基土体的沉降。基于试样第10 000圈的永久体应变和永久轴向应变,分别建立了可以量化部分排水条件下循环围压对饱和软黏土永久体应变和永久轴向应变影响的经验公式,并用于预测饱和软黏土在交通荷载这种包含循环偏应力和循环围压耦合作用的复杂应力条件下产生的永久变形。 相似文献
20.
Tsutomu Namikawa 《国际地质力学数值与分析法杂志》2001,25(6):605-627
A delayed plastic model, based on the theory of plasticity, is proposed to represent the time‐dependent behaviour of materials. It is assumed in this model that the stress can lie outside the yield surface and the conjugate stress called static stress is defined on the yield surface. The stress–strain relation is calculated based on the plastic theory embedding the static stress. Thus, the stress–strain relation of the model practically corresponds to that of the inviscid elastoplastic model under fairly low rate deformation. The delayed plastic model is coupled with the Cam‐clay model for normally consolidated clays. The performance of the model is then examined by comparing the model predictions with reported time‐dependent behaviour of clays under undrained triaxial conditions. It is shown that the model is capable of predicting the effect of strain rate during undrained shear and the undrained creep behaviour including creep rupture. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献