共查询到20条相似文献，搜索用时 21 毫秒
1.
本文从几何学的角度,根据掀斜块体长度、掀斜角、脊的隆起量和边界断层倾角等几何要素,推导出了计算掀斜块体滑脱深度的表达式。结果表明,旋转平面状正断层围限块体的滑脱深度与脆韧性转换带上顶面深度一致,为10—15公里;铲形正断层围限块体的滑脱深度达到或超过脆韧性转换带深度,为20—30公里 相似文献
2.
利用1999—2007年、 2009—2015年和2015—2017年即2016年1月21日门源MS6.4地震前后的GPS水平运动资料, 以及震区周边200 km半径范围内跨断层流动短水准观测数据, 借助GPS视应变场计算、 冷龙岭断裂剖面的负位错反演, 以及跨断层形变强度新指标的提炼, 综合分析此次强震前相关断裂的中—长期闭锁背景以及断裂活动的中—短期动态演变过程。 结果显示: ① 2009—2015年相对1999—2007年, 祁连山构造区中东部GPS站点间差异运动和挤压变化增强; 跨断层短水准观测也显示震前2年左右时间内相似的断裂活动或形变应变加速特征。 ② 分层非均匀负位错反演揭示与地震相关的冷龙岭等断裂1999—2007年即震前十数年长期闭锁, 2009—2015年即震前6年半上—中层即地表以下0～15.6 km深度闭锁程度明显增大。 ③震区周边半径200 km内跨断层形变强度新指标显示出震前半年内逆断稍占优势的变幅加剧异常, 反映中短期前兆。 相似文献
3.
The 2008 MS8 Wenchuan earthquake occurs on a high angle listric thrust fault. It is the first time that the near and far field strong ground motion was observed for such special type thrust earthquake. This paper jointly interprets the distribution of peak acceleration of ground motion data with seismogenic structure and slip propagating process to investigate how high angle listric thrust fault controls the pattern of strong ground motion. We found that the distribution of peak acceleration of strong ground motion during the Wenchuan earthquake has four distinctive features: 1)The peak acceleration of ground motion inside the Longmenshan fault zone is large, that is, nearly twice as strong as that outside the fault zone; 2)This earthquake produces significant vertical ground motion, prevailing against horizontal components in the near field; 3)The far field records show that the peak acceleration is generally higher and attenuates slower versus station-fault distance in the hanging wall. It is doubtful that the attenuation of horizontal components also has the hanging wall effect since no evidence yet proving that the unexpected high value at long distance need be omitted; 4)As to the attenuation in directions parallel to the source fault(Yingxiu-Beichuan Fault), the far field records also exhibit azimuthal heterogeneity that the peak acceleration of horizontal components decreases slower in the north-northeastern direction in which the co-seismic slip propagates than that in the backward way. However, the attenuation of vertical component displays very weak heterogeneity of this kind. Synthetically considered with shallow dislocation, high dip angle, and prevailing vertical deformation during co-seismic process of the Wenchuan earthquake, our near and far field ground motion records reflect the truth that the magnitude of ground motion is principally determined by slip type of earthquake and actual distance between the slipping source patches and stations. As a further interpretation, the uniqueness of high angle listric thrust results in that the ground motion effects of the Wenchuan earthquake are similar to that due to a common thrust earthquake in some components while differ in the others. 相似文献
4.
5.
The focal mechanism solution on the seismic fault plane can reflect the geometric and kinematic characteristics of faults, and it is an important way to further study the fine structure of fault plane. From the focal mechanism solution of the earthquakes around the Dujiangyan fault in Longmenshan fault zone, we derived the average dip angle of Dujiangyan fault is 45.1° based on the seismic moment tensor theory. In order to refine the fault geometry structure, this paper decomposed it into multiple sub-fault planes along the length and width of the fault plane and forms a number of models A13, B13, A23 a, A23 b, A23 c, B23 a,B23 b and B23 c, then calculated the sub-fault's dip of each model. In order to clarify exactly which one of the fault models is closest to the real fault model, the fault slip was carried out for each model in turn, then compared the surface displacement of each model with GPS observations. The results show that B23 c model with high dip in shallow and small dip in deep is the best model, the lengths of each subfault of Dujiangyan fault from south to north are 33 km, 21 km and 46 km, respectively. When the depth of the fault bottom is about 11 km, the dip angles are 70.56°, 67.41° and 45.55°.When the depth of the fault bottom is about 30 km, The fault dip angles are 44.55°, 29.18° and 44.25°. 相似文献
6.
2002～2003年长白山火山区的水平运动缺乏中心对称性分布特征,本文采用同一深度沿三个互相垂直方向拉张的点源模式模拟了长白山火山区的岩浆囊压力变形源. 在介质参数为Vp＝6.700 km/s,Vs＝3.8700 km/s,ρ＝2900 kg/m3的均匀弹性半空间中, 联合利用2002～2003年长白山火山区的GPS观测数据和水准数据, 结合PSGRN/PSCMP代码和遗传算法反演长白山火山区的压力变形源特征. 反演结果表明,由三个垂直的不等量扩张方向确定的椭球状点源模型可以较好地模拟长白山火山区岩浆囊压力变形源. 岩浆囊深处9.2 km,在走向为34.4°,倾角为82.2°的断层面的法向方向体积扩张量最大,达到7000000 m3;在走向为3028°,倾角为78.5°的断层面的法向方向体积扩张量次之,达到6598071 m3;在走向为337.7°,倾角为14.0°的断层面的法向方向体积扩张量最小,达到5220160 m3. 相似文献
7.
本文分析了日本海及中国东北的地震深度分布。证实了日本本州北部至中国东北的贝尼奥夫带(Benioff)基本是连续的,该带的倾向约为北85°西,倾角约为29°,深度在150公里以下贝尼奥夫带厚度约为20公里。研究了日本本州北部至中国东北的震级M_b≥5.0地震的震源机制解,发现中国东北地壳应力场与日本海地壳的应力场方向一致,来源于太平洋板块的挤压。在俯冲带上,深度在100公里到200公里之间的情况较为复杂,大多数地震显示的主压应力方向与贝尼奥夫带的倾向、倾角一致,有的T轴取向与贝尼奥夫带的倾向、倾角一致,有的特征方向与贝尼奥夫带倾向、倾角均不一致。深度在200公里至500公里之间,主压应力方向近于水平,并与贝尼奥夫带走向垂直,张应力轴相对集中。深度大于500公里时,主压应力方向与贝尼奥夫带的倾向、倾角一致,张应力轴相对集中 相似文献
8.
综合利用玉树震区应急流动台站观测数据和青海地震台网固定台站观测数据,依据最新的人工地震宽角反射/折射剖面的速度模型,采用Hypo2000地震定位法,对2010年4月18日至4月29日期间玉树震区发生的部分余震进行了重新定位.重新定位后,震源位置的水平和垂直方向平均误差分别为1.35 km和4.68 km,走时残差为0.49 s.震源深度分布范围为1.48～19.85 km,平均震源深度为10.28 km.定位研究结果表明:玉树地震余震沿北西-南东向的甘孜-玉树断裂带的北支,即玉树-隆宝断裂分布,长约97 km.余震分布特征在主震(微观震中)两侧存在差异,可能反映了两侧构造特征存在差异.截止到4月29日,主震东南仍是应力的主要释放区域,余震强度大且活动密集的区域位于主震东南距主震约5 km、横向范围约20 km.主震破裂区的大部分应力在主震过程中得以释放,主震时应力未释放的区域成为主要的余震分布区.余震的连续发生可能已造成主震破裂区相互连通,且破裂范围向西北方向扩展.玉树主震及余震的发震构造为甘孜-玉树断裂的北支,即玉树-隆宝断裂段,断层性质为北东倾向的高角度左旋走滑断层.发震断层的倾角和宽度在帮洞两侧有所不同,帮洞以东发震断层宽度约为12 km,倾角约为83°;而帮洞以西发震断层宽度约为6.5 km,断层倾角约减缓为63°. 相似文献
9.
本文研究了兴都库什及帕米尔地区地震的空间分布.发现h<70km的地震分布广泛,h≥100km的地震形成-S形的倾斜中源地震带.在71.5°E以西,中源地震带倾向接近正北,倾角随深度变化,在深部接近垂直,且倾角自西向东逐渐变陡,在71.5°E以东,倾向逐渐由东南变为正南. 分析了121个mb≥5.0地震的机制解.浅源地震机制解的P轴大多位于NS和NNW-SSE方向,且多近水平,反映此区受到NS或NNW-SSE方向挤压.各剖面应力轴分布规律性强,在150km以下,总的趋势是机制解的T轴接近于倾斜的中源地震带的下倾方向,而P轴倾角较小且垂直于倾斜的中源地震带的走向. 相似文献
10.
本文提出并试验了一种基于接收函数建立区域模型进行震源机制反演的方法.选取四川地震台网记录的M≥3且信噪比高的近震波形资料,反演得到了芦山地震序列中74个地震的震源机制.通过对震源深度和震源机制的综合分析,探讨了芦山地震的发震构造和区域应力场状态.采用接收函数方法反演获取了26个台站下方的S波速度结构,对不同区域的台站反演结果进行叠加平均,以此区域平均S波速度作为本文震源机制反演使用的区域模型的S波速度;区域模型的P波速度由经验公式给出.反演稳定性测试表明,使用不同模型或对原始波形记录加入随机噪声的反演结果与原始反演相比,震源深度最大误差为1km,断层面各参数误差水平也很低,且显示的发震类型是一致的,其中随机噪声带来的误差小于模型带来的误差.主震反演得到的震源机制解为:震源深度17km,矩震级6.47;节面Ⅰ走向213°,倾角51°,滑动角98°;节面Ⅱ走向20°,倾角40°,滑动角80°;显示芦山主震可视为纯逆冲型地震,发震构造可能是某个具有较大倾角的逆冲断层,而不是低缓的推覆构造的基底滑脱面.同时本文反演获取的73个M≥3余震的震源机制绝大多数也显示了类似的发震类型,逆冲型地震为67个,占92%,具有绝对优势;走滑型地震为5个,正断型地震为1个.其中5个走滑型地震中的4个均分布在震源区的东北端.整个芦山地震序列深度集中在12~20km,且沿震源区短轴的余震深度剖面有自西向东呈逐步变浅的趋势,呈现清晰的铲形断面结构,结合本地地质构造,可以推断芦山地震序列主要发生在龙门山前山断裂以东的逆冲推覆体内的一个隐伏断裂上.P轴方位角优势方位与区域应力场及汶川震源区南段的相一致,表明芦山序列地震活动主要受区域应力场控制,且汶川震后该区应该不存在应力场变化.P轴仰角随深度分布则显示了孕震层在浅部为脆性上地壳,而深部已经进入了中地壳低速层.断层面的几何形态简单,倾角均值在不同深度保持稳定在55°左右,与主震倾角接近,这与汶川震源区南段的研究结果明显不同,揭示了龙门山断裂带南段与此次芦山发震断裂在断层面几何形态上的明显差异. 相似文献
11.
2017年8月8日四川省九寨沟县发生了7.0级地震,中国大陆构造环境网络与北斗地基增强系统的GNSS连续观测共同监测到了此次地震的同震位移（坐标：东向为正,北向为正）,结果显示：3个站点记录到了明显的同震位移,距离震中43 km的九寨沟台站（SCJZ）在东西向的位移为-9.8±1.5 mm,在南北向的位移为3.3±0.7 mm;距离震中65 km的松潘站（SCSP）在东西向的位移为-1.8±0.7 mm,在南北向的位移为-7.7±0.6 mm;距离震中77 km的舟曲站（GSZQ）在东西向的位移为0.4±1.2 mm,在南北向的位移为3.6±0.8 mm.通过同震位移分布特征,可以推测此次地震为一次左旋走滑型事件,引起水平向同震位移大致不超过150 km范围,地震对东南侧的龙门山断裂带影响非常小,对北侧的塔藏断裂和西侧的岷江断裂处引起的同震位移为厘米级.同震位移的反演结果显示：断层面上滑动量主要集中在7 km深度,最大量值约为0.4 m,平均滑动角为-15°,利用滑动分布计算的相应矩震级为MW6.4,与地震波反演结果相当.结合同震滑动分布、同震主应变分布、余震分布和震源机制解等特征,推测此次地震破裂极值区累积的能量得到较充分释放,进一步分析得出此次地震在塔藏断裂、岷江断裂和虎牙断裂处产生了一定的应力变化,值得持续关注. 相似文献
12.
采用深地震反射剖面探测,结合地表地质信息,本文对芦山地区的地壳结构、深浅构造和隐伏活动断裂进行了分析.研究结果表明:该区上地壳结构特征清晰,深度约为15km左右;区内断裂由于受青藏高原向东南方向的推挤和坚硬的四川盆地阻挡的联合作用均属逆冲断裂,其中双石—大川断裂以低角度向深部延伸,主要表现为纯逆冲的运动学性质,并与周边小断裂共同组成叠瓦状断层构造.而广元—大邑断裂为上陡下缓式逆冲断裂,与其六条分支断裂共同组成了"正花状"构造,断裂活动是以逆冲为主,并伴随着小的水平滑动,是一条斜向逆冲的断裂.在芦山地震发震断裂的2km范围内推测存在一陡一缓两条断裂,并根据三者形态推测其在18km或以上收敛到一起并向深部延伸,从而使它们在芦山地震中被同时激活.研究结果揭示了研究区近地表活动断裂和地壳深部构造之间的关系,为进一步研究龙门山断裂带的深部构造环境、深浅构造关系以及断裂的活动性提供了有利的依据. 相似文献
13.
FOCAL MECHANISM AND SEISMOGENIC STRUCTURE OF THE M5.0 YUEXI EARTHQUAKE ON 1 OCT. 2014, SOUTHWESTERN CHINA 
下载免费PDF全文
下载免费PDF全文 The Oct.1,2014 M5.0 Yuexi earthquake occurred on the Daliang Shan fault zone where only several historical moderate earthquakes were recorded.Based on the waveform data from Sichuan regional seismic network,we calculated the focal mechanism solution and centroid depth of the M5.0 Yuexi earthquake by CAP (Cut and Paste) waveform inversion method,and preliminarily analyzed the seismogenic structure.We also calculated the apparent stress values of the M5.0 earthquake and other 14 ML≥4.0 events along the Shimian-Qiaojia fault segment of the eastern boundary of the Sichuan-Yunnan block.The result indicates that the parameters of the focal mechanism solution are with a strike of 256°,dip of 62°,and slip of 167° for the nodal plane Ⅰ,and strike of 352°,dip of 79°,and slip of 29° for the nodal plane Ⅱ.The azimuth of the P axis is 121° with dip angle of 11°,the azimuth of T axis is 217° with dip angle of 28°,and the centroid depth is about 11km,and moment magnitude is MW5.1.According to the focal mechanism solution and the fault geometry near the epicenter,we infer that the seismogenic fault is a branch fault,i.e.,the Puxiong Fault,along the central segment of the Daliang Shan fault zone.Thus,the nodal plane Ⅱ was interpreted as the coseismic rupture plane.The M5.0 Yuexi earthquake is a strike-slip faulting event with an oblique component.The above findings reveal the M5.0 Yuexi earthquake resulted from the left-lateral strike-slip faulting of the NNW Dalang Shan fault zone under the nearly horizontal principal compressive stress regime in an NWW-SEE direction.The apparent stress value of the Yuexi earthquake is 0.99MPa,higher than those of the ML ≥ 4.0 earthquakes along the eastern boundary of the Sichuan-Yunnan block since 2008 Wenchuan M8.0 earthquake,implying a relatively high stress level on the seismogenic area and greater potential for the moderate and strong earthquake occurrence.It may also reflect the current increasing stress level of the entire area along the eastern boundary,and therefore,posing the risk of strong earthquakes there. 相似文献
14.
2021年7月18日—8月7日,宁夏吴忠—灵武地区发生ML3.6显著震群活动。本文利用多阶段定位方法对该震群进行了重新定位,并根据gCAP方法反演了2021年7月20日灵武ML3.6地震的震源机制及震源矩心深度,采用Snoke方法计算了震群中3次ML3.0以上地震的震源机制,测定了同一地震多个震源机制的中心解。结果表明,该震群中最大的地震即7月20日02时40分ML3.6地震的震源机制为节面Ⅰ走向289°,倾角72°,滑动角?22°,节面Ⅱ走向26°,倾角69°,滑动角?161°,震源矩心深度为12 km,初始破裂深度为12.5 km;7月20日03时15分ML3.2地震的震源机制为节面Ⅰ走向290°,倾角82°,滑动角?2°,节面Ⅱ走向20°,倾角88°,滑动角?172°,初始破裂深度为11.9 km;7月21日04时55分ML3.1地震的震源机制为节面Ⅰ走向285°,倾角53°,滑动角2°,节面Ⅱ走向194°,倾角88°,滑动角143°,初始破裂深度为11.6 km,这些地震震源机制的主压应力轴主要为NE向。该震群序列的震源深度主要相对集中在7—15 km之间,其中ML3.0以上地震的震源深度主要介于11—13 km,震源深度剖面显示震群相对集中的区域由深到浅大体呈现近似于陡立的展布。本文进一步研究发现区域应力场在灵武ML3.6地震震源机制NNE向节面产生的相对剪应力为0.393,而在NWW向节面产生的相对剪应力为0.945。结合地质构造和已有断层资料初步分析认为,若NNE向的崇兴隐伏断裂为灵武ML3.6地震的发震断层,则表明崇兴断裂可能是一条断裂薄弱带,地震破裂方式主要为右旋走滑;若NWW向的未知隐伏断裂为发震断层,则表明NWW向断裂可能为该地震在区域应力场下的剪应力相对最大释放节面,其破裂方式为左旋走滑。 相似文献
15.
1303年在山西洪洞附近发生的8级巨大地震, 是中国根据现存较为详细的文献记载史料所确定的最早的一次8级地震。 这次地震距今已有700多年的历史, 而地震所在区域至今仍有持续不断的小地震活动。 本文根据地震破裂区1981年至2013年的中小地震精定位地震目录, 采用震源断层面拟合方法, 反演得到了1303年山西洪洞地震的震源断层面参数: 走向19.3°、 倾角88.5°、 滑动角-170.0°。 断层面长75.5 km, 宽26.2 km, 深度为地下11.12 ～37.35 km。 将地震破裂区的地震精确定位资料以近东西向的洪洞断裂为界划分为地震北段和地震南段, 分段进行地震震源断层拟合, 反演得到洪洞地震北段震源断层面参数: 走向13.7°、 倾角76.6°、 滑动角-157.6°。 断层面长32.7 km, 宽21.7 km, 深度为地下11.97～32.86 km; 南段震源断层面参数: 走向20.3°、 倾角87.1°、 滑动角-154.6°。 断层面长45.9 km, 宽16.6 km, 深度为地下9.32 km～25.50 km。 无论是分段还是不分段, 反演得到的洪洞地震震源断层均是右倾的近直立断层, 属于右旋走向滑动性质。 分段计算得到的地震北段震源断层深度比南段更深, 将反演得到的震源断层与临汾盆地深部构造最新研究成果进行了分析对比, 北段震源断层深度及倾角大小与深地震剖面推测得到的深大断裂几乎相同。 震源断层在地表的投影与洪洞地震的高烈度区能够较好地对应。 相似文献
16.
2017年8月8日的九寨沟MS7.0地震发生在岷江断裂、塔藏断裂及虎牙断裂交汇地区,地处青藏高原东北部的川甘交界地区,位于巴颜喀拉地块的东缘,地质构造复杂,对于九寨沟地震震中位置和发震断层的确定,存在不同意见.本文利用GNSS及升降轨InSAR观测,在获取九寨沟地震同震形变场的基础上,基于均匀弹性半无限位错模型,联合反演了发震断层的滑动分布模型,并计算了同震库仑应力变化.InSAR同震形变场显示,视线向最大沉降量和抬升量分别为0.21 m和0.16 m,形变场长轴为NW向,形变主要集中在断层西侧.距震中40 km和65 km的九寨和松潘两县,水平向的GNSS同震位移分别达14.31 mm和8.22 mm.联合GNSS和InSAR同震形变场反演得到的滑动分布主要集中在沿走向5~33 km,倾向2~20 km的范围内,平均滑动量为0.18 m,最大滑动量为0.91 m.发震断层长40 km,宽30 km,走向155°,倾角81°,滑动角-9.56°.同震位移场及滑移分布模型表明此次地震为一次左旋走滑为主的地震事件,地震破裂并未完全到达地表,与虎牙断裂北段的几何产状和运动学性质更为接近,结合精定位余震的分布,我们确定虎牙断裂北段为此次地震的发震断层,震中位于北纬33.25°,东经103.82°,震源深度10.86 km,矩震量为7.754×1018 Nm,相应的矩震级为MW6.5,与美国地调局和哈佛大学给出的震源机制解基本一致.同震库仑应力导致了虎牙断裂北段延长线的东北和西南两端应力增强,其中塔藏断裂的罗叉段和马磨段未来强震的危险性值得关注. 相似文献
17.
MECHANISM OF THE 2015 PISHAN,XINJIANG, MS6.5 MAINSHOCK AND RELOCATION OF ITS AFTERSHOCK SEQUENCES 下载免费PDF全文
下载免费PDF全文 Using the digital broadband seismic data recorded by Xinjiang network stations, we obtained focal mechanism of the July 3 Pishan, Xinjiang, MS6.5 earthquake with generalized Cut and Paste(gCAP)inversion method. The strike, dip and rake of first nodal plane are 97°, 27°, 51°, and the second nodal plane are 318°, 70°, 107°. The centroid depth and moment magnitude are calculated to be 12km and 6.4. Combining with the distribution of aftershocks, we conclude that the first nodal plane is the seismogenic fault, and the main shock presents a thrust earthquake at low angle. We relocated 1014 earthquakes using the double-difference algorithm, and finally obtained 937 relocated events. Our results show that the earthquake sequences clearly demonstrate a unilateral extension about 50km nearly in NWW direction, and are mainly located above 25km depth, especially the small earthquakes are predominately located at the shallow parts. Furthermore, the focal depth profile shows a southwestward dipping fault plane at the main shock position, suggesting listric thrust faulting, which is consistent with the dip of the mainshock rupture plane. The spatial distribution of aftershocks represents that the Tarim block was thrust under the West Kunlun orogenic belt. In addition, the dip angle of the fault plane gradually increases along the NWW direction, possibly suggesting a gradual increase of strike-slip component during the NWW rupturing process. From above, we conclude that the Pishan MS6.5 earthquake is the result of Tibet plateau pushing onto the Tarim block from south to north, which further confirms that the continuous collision of India plate and Eurasia plate has strong influence on the seismic activity in and around the Tibet plateau. 相似文献
18.
A strong earthquake with magnitude MS6.2 hit Hutubi, Xinjiang at 13:15:03 on December 8th, 2016(Beijing Time). In order to better understand its mechanism, we performed centroid moment tensor inversion using the broadband waveform data recorded at stations from the Xinjiang regional seismic network by employing gCAP method. The best double couple solution of the MS6.2 mainshock on December 8th, 2016 estimated from local and near-regional waveforms is strike:271°, dip:64ånd rake:90° for nodal plane I, and strike:91°, dip:26ånd rake:90°for nodal plane Ⅱ; the centroid depth is about 21km and the moment magnitude(MW)is 5.9. ISO, CLVD and DC, the full moment tensor, of the earthquake accounted for 0.049%, 0.156% and 99.795%, respectively. The share of non-double couple component is merely 0.205%. This indicates that the earthquake is of double-couple fault mode, a typical tectonic earthquake featuring a thrust-type earthquake of squeezing property.The double difference(HypoDD)technique provided good opportunities for a comparative study of spatio-temporal properties and evolution of the aftershock sequences, and the earthquake relocation was done using HypoDD method. 486 aftershocks are relocated accurately and 327 events are obtained, whose residual of the RMS is 0.19, and the standard deviations along the direction of longitude, latitude and depth are 0.57km, 0.6km and 1.07km respectively. The result reveals that the aftershocks sequence is mainly distributed along the southern marginal fault of the Junggar Basin, extending about 35km to the NWW direction as a whole; the focal depths are above 20km for most of earthquakes, while the main shock and the biggest aftershock are deeper than others. The depth profile shows a relatively steep dip angle of the seismogenic fault plane, and the aftershocks dipping northward. Based on the spatial and temporal distribution features of the aftershocks, it is considered that the seismogenic fault plane may be the nodal plane I and the dip angle is about 271°. The structure of the Hutubi earthquake area is extremely complicated. The existing geological structure research results show that the combination zone between the northern Tianshan and the Junggar Basin presents typical intracontinental active tectonic features. There are numerous thrust fold structures, which are characterized by anticlines and reverse faults parallel to the mountains formed during the multi-stage Cenozoic period. The structural deformation shows the deformation characteristics of longitudinal zoning, lateral segmentation and vertical stratification. The ground geological survey and the tectonic interpretation of the seismic data show that the recoil faults are developed near the source area of the Hutubi earthquake, and the recoil faults related to the anticline are all blind thrust faults. The deep reflection seismic profile shows that there are several listric reverse faults dipping southward near the study area, corresponding to the active hidden reverse faults; At the leading edge of the nappe, there are complex fault and fold structures, which, in this area, are the compressional triangular zone, tilted structure and northward bedding backthrust formation. Integrating with geological survey and seismic deep soundings, the seismogenic fault of the MS6.2 earthquake is classified as a typical blind reverse fault with the opposite direction close to the southern marginal fault of the Junggar Basin, which is caused by the fact that the main fault is reversed by a strong push to the front during the process of thrust slip. Moreover, the Manas earthquake in 1906 also occurred near the southern marginal fault in Junggar, and the seismogenic mechanism was a blind fault. This suggests that there are some hidden thrust fault systems in the piedmont area of the northern Tianshan Mountains. These faults are controlled by active faults in the deep and contain multiple sets of active faults. 相似文献
19.
利用ISC及中国台网的资料,研究了琉球岛弧及冲绳海槽的地震分布及震源机制解,讨论了Benioff带的形态及应力状态.mb4.0的地震主要分布于琉球海沟西侧的弧形带,并形成明显的Benioff带.吐噶喇海峡以北俯冲带弯曲明显,深部倾角大,约92,70km以下张应力轴沿俯冲方向;吐噶喇海峡以南,俯冲带较平直,深部倾角较小,约55,压应力轴基本沿俯冲方向。冲绳海槽内处于NNW向近水平的拉伸,华北应力场与之类似,没有受到菲律宾海块挤压作用的影响. 相似文献
20.
通过地震分布及地震机制解所反映的日本海-鄂霍次克海俯冲带的形态及应力状态,研究了俯冲带深部形变及650km间断面的穿透问题.日本海Benioff带较直,连续性较好;鄂霍次克海Benioff带弯度稍大,220-320km深度之间地震很少.两俯冲带在浅部及深部地震密集,100-200km深度之间有双地震层.应力状态随深度变化,200km深度以下P,T轴方向相对集中,P轴接近俯冲方向,在约100-200km深度附近,P,T轴均接近俯冲方向.观测和理论地震图拟合分析表明,地震断层面走向接近俯冲带走向,断裂的结果使俯冲带在深部倾角变小. 相似文献