共查询到20条相似文献，搜索用时 31 毫秒
1.
Sensitive Ocean Bottom Implanted Tiltmeters (OBITs) with a sophisticated data retrieval system have been developed in order to observe directly the subduction of oceanic lithosphere. The OBIT is the first long-term geophysical instrument which was designed to be deployed by a manned deep-sea submersible. When the OBIT is put on oceanic lithosphere which is bending and is about to subduct under a deep sea trench, the OBIT records the subduction by observing the tilt of the surface of the lithosphere. The OBIT system has a sensitivity of 10-8 radian, which is enough to detect the ongoing subduction in months or years. The OBIT may give an answer to the question whether there are fluctuations in the subduction rate.Two OBITs were successfully deployed on a seaward slope of the Kuril Trench by the newly built French deep submersible, Nautile. The OBITs were installed on the northwest shoulder of Erimo seamount, at a depth of 3930 m, in the Kuril Trench. In order to attain stable long-term observations of crustal deformations, the sensing unit was cemented onto bare rock by mortar. We have not yet had an opportunity to recover the data.The life of the instruments is expected to be more than five years. An acoustic data transmission system has been developed for the OBIT data recovery. The stored data can be retrieved at any moment during the observation period, with no need to retrieve the instruments nor to interrupt the observation, by use of the acoustic system. The acoustic system has a high data transmission rate as well as extremely low power consumption. This will be the first long-term crustal deformation measurement on the sea floor. 相似文献
2.
海底沉积物的声学测量是海底测深的关键技术之一,应用于海底地形地貌测量、海洋矿产资源开采和海底工程建设等。海底沉积物声学测量方法中的原位测量方法可以避免保真采样法的强扰动性和遥测法的准确度、精度及灵敏度的不确定性等缺点,如何改进原位测量系统渐成为海底探测的研究热点。通过分析现有海底沉积物原位测量设备测试换能器的工作原理,针对垂直压入方式换能器测量深度有限,提出了一种通过改变换能器压入沉积物的角度来增加测量深度的方法。在理论上论证出在不低于换能器接收阈值时,测量深度随着掠射角的增加而增加。在不增加压入深度的前提下提供了一种增加测量深度方法。 相似文献
3.
4.
Seafloor acoustic remote sensing with multibeam echo-sounders and bathymetric sidescan sonar systems 总被引：5，自引：0，他引：5
This paper examines the potential for remote classification of seafloor terrains using a combination of quantitative acoustic backscatter measurements and high resolution bathymetry derived from two classes of sonar systems currently used by the marine research community: multibeam echo-sounders and bathymetric sidescans sonar systems. The high-resolution bathymetry is important, not only to determine the topography of the area surveyed, but to provide accurate bottom slope corrections needed to convert the arrival angles of the seafloor echoes received by the sonars into true angles of incidence. An angular dependence of seafloor acoustic backscatter can then be derived for each region surveyed, making it possible to construct maps of acoustic backscattering strength in geographic coordinates over the areas of interest. Such maps, when combined with the high-resolution bathymetric maps normally compiled from the data output by the above sonar systems, could be very effective tools to quantify bottom types on a regional basis, and to develop automatic seafloor classification routines. 相似文献
5.
The GNSS-Acoustics (GNSS-A) method couples acoustics with GNSS to allow the precise localization of a seafloor reference in a global frame. This method can extend on-shore GNSS networks and allows the monitoring of hazardous oceanic tectonic phenomena. The goal of this study is to test the influence of both acoustics ray tracing techniques and spatial heterogeneities of acoustic wave speed on positioning accuracy. We test three different ray tracing methods: the eikonal method (3D sound speed field), the Snell-Descartes method (2D sound speed profile), and an equivalent sound speed method. We also compare the processing execution time. The eikonal method is compatible with the Snell-Descartes method (by up to 10 ppm in term of propagation time difference) but takes approximately a thousand times longer to run. We used the 3D eikonal ray tracing to characterize the influence of a lateral sound speed gradient on acoustic ray propagation and positioning accuracy. For a deep water (? 3,000 m) situation, frequent in subduction zones such as the Lesser Antilles, not accounting for lateral sound speed gradients can induce an error of up to 5 cm in the horizontal positioning of a seafloor transponder, even when the GNSS-A measurements are made over the barycenter of a seafloor transponder array. 相似文献
6.
7.
Jingqiang Wang Baohua Liu Guangming Kan Zhiwen Sun Xiangmei Meng 《Marine Georesources & Geotechnology》2018,36(5):515-521
The mechanical structure, the function modules, the working principles, and a sea trial of the newly developed ballast in situ sediment acoustic measurement system are reported in this study. The system relies on its own weight to insert transducers into seafloor sediments and can accurately measure the penetration depth using a specially designed mechanism. The system comprises of an underwater position monitoring and working status judgment module and has two operation modes: self-contained measurement and real-time visualization. The designed maximum working water depth of the system is 3,000?m, and the maximum measured depth of seafloor sediment is 0.8?m. The system has one transmitting transducer with the transmitting frequency band of 20–35?kHz and three receiving transducers. The in situ acoustic measurement system was tested at 15 stations in the northern South China Sea, and repeated measurements in seawater demonstrated good working performance. Comparison with predictions from empirical equations indicated that the measured speed of sound and attenuation fell within the predicted range and that the in situ measured data were reliable. 相似文献
8.
Liang Yuanbo Lu Bo Huang Shaojian Li Tinghuan Yang Weiguang Wen Yaolin 《Marine Georesources & Geotechnology》2013,31(3-4):189-201
Abstract The possibility of seafloor failure under external loadings on a gently sloping continental shelf is controlled, to a large extent, by the geotechnical characters of subbottom sediments (e.g., shear strength, compressibility, and liquefaction potential) and structural factors (e.g., sedimentary stratification). By means of undis‐turbing coring, in‐situ acoustic measurement, and subbottom profiling, the authors conducted an investigation into the seafloor instabilities and possibilities of sediment slope failure within the continental shelf off the Pearl River mouth, which is one of the most important areas for offshore development in the northern South China Sea. Based on in‐situ and laboratory measurements and tests for sediment physical properties, static and dynamic behavior, and acoustic characteristics, the analyses indicate: (1) subbottom sediments that originated from terrigenous clay during the Pleistocene are compact and overconsolidated, and the mean sound velocity in such sediments is relatively high; (2) the maximum vertical bearing capacity of subbottom sediments is efficiently conservative on the safe side for dead loads of light structures, and the trench walls are stable enough while trenching to a depth of about 2 m below the seafloor under still water; and (3) it is quite improbable that the subbottom sediments liquefy under earthquake (M ≤ 6) or storm wave loading. 相似文献
9.
G. H. Purcell Jr. L. E. Young S. Kornreich Wolf T. K. Meehan C. B. Duncan S. S. Fisher 《Marine Geodesy》2013,36(3-4):255-264
Abstract This article describes the design and initial tests of the GPS portion of a system for making seafloor geodesy measurements. In the planned system, GPS antennas on a floating platform will be used to measure the location of an acoustic transducer, attached below the platform, which interrogates an array of transponders on the seafloor. Since the GPS antennas are necessarily some distance above the transducer, a short‐baseline GPS interferometer consisting of three antennas is used to measure the platform's orientation. A preliminary test of several crucial elements of the system was performed at the Scripps Institution of Oceanography (SIO) in December 1989. The test involved a fixed antenna on the pier and a second antenna floating on a buoy about 80 m away. GPS measurements of the vertical component of this baseline, analyzed independently by two groups using different software, agree with each other and with an independent measurement within a centimeter. The first test of an integrated GPS/acoustic system took place in the Santa Cruz Basin off the coast of southern California in May 1990. In this test a much larger buoy, designed and built at SIO, was equipped with three GPS antennas and an acoustic transducer that interrogated a transponder on the ocean floor. Preliminary analysis indicates that the horizontal position of the transponder can be determined with a precision of about a centimeter. Further analysis will be required to investigate the magnitude of systematic errors. 相似文献
10.
11.
Tomoyoshi Takeuchi 《Marine Geodesy》2013,36(3-4):225-231
Abstract It is desired to track the location of an underwater data collecting platform using acoustic range data. A long‐range and high‐resolution acoustic system for underwater locating has been investigated. The system provides continuous and highly accurate tracking of a platform referenced to bottom‐mounted buoys. Each reference buoy contains an acoustic transponder, which is used to obtain ranging data from the transponder to the platform. The transponder has a signal source that is phase‐modulated by a maximal‐length binary sequence and a correlation processing unit to be capable of detecting received acoustic signals with high SNR in a noisy environment or in attenuation due to long‐range propagation, and to identify multipath acoustic signals. The acoustic system has been designed and sea tests tried. The results of that experiment have yielded capability of a submeter underwater acoustic positioning system. 相似文献
12.
Lei Sun Xiangmei Meng Guanbao Li Guangming Kan Baohua Liu 《Marine Georesources & Geotechnology》2020,38(5):595-603
AbstractThe high-frequency acoustic properties of seafloor sediments are very significant in seafloor study and underwater acoustic study field. In order to measure the sound speed and the attenuation for the small-scale sediment cores more accurately, this study developed a water coupled acoustic laboratory measurement system based on Richardson-Briggs technique. This method used the correlation comparison of waveforms received in sediment core and in identical reference tubes filled with water to measure sound speed and attenuation. The sound speed and attenuation of a clayey silt sediment sample were measured using the water coupled acoustic laboratory measurement system. This frequency dependence of the sound speed and attenuation showed that the clayey silt sediment has a weak positive sound speed dispersion, while the attenuation increases with a strong positive gradient within the measurement frequency range. This study also noted that the measured sound speed ratio match well with the empirical equations from literature. The measured attenuation factor data can fall in the Hamilton’s empirical prediction range. 相似文献
13.
Angus I. Best William Powrie Toby Hayward Max Barton 《Marine Georesources & Geotechnology》2013,31(4):315-331
Abstract Recent marine forensic investigations have largely unravelled the sequence of events concerning the sinking of the R.M.S. Titanic and its descent through nearly 3800 m of water to the seafloor on the morning of 15 April 1912. In particular, the velocity and attitude of the Titanic's bow section (at present lying upright, reasonably intact, and embedded by ～12 m at the prow) as it hit the bottom are of general interest to marine accident investigators. During the 1998 Titanic Science Expedition, a single sediment sample was retrieved from the seafloor (depth 20–30 cm) near the wreck by the deep water submersible, Nautile. Published geological studies suggest the seafloor in this area has remained largely undisturbed since 1912. Geotechnical analysis of the sediment sample reveals that the impact was probably a substantially undrained event and that the characteristic undrained shear strength of the sediment is ～25kPa within 10–16 m below the seafloor. A simple analytical model was used to calculate the embedment of a cuboid with dimensions and mass of the water-filled bow as a function of impact velocity, impact angle, and the undrained shear strength of the sediment. The results indicate the impossibility of a steep angle of impact and fast velocity. The most likely scenario is an impact velocity of 5–10 m/s at a fairly shallow angle (<40°), which corroborates the results of hydrodynamic investigations. 相似文献
14.
Abstract The fourth in a series of biennial national Exclusive Economic Zone symposia was held on November 14–16, 1989. The purpose of the meeting was to examine ongoing and planned mapping and research activities in the ocean waters of the United States. Approximately 220 individuals attended the meeting. Issues discussed related to digital seafloor mapping projects, cooperative federal‐state programs, and requirements for additional data and information. Symposium recommendations included the need for increased surveying in coastal waters, development of standards for digital data dissemination, increased coordination with coastal states and federal agencies, and additional geophysical measurement systems abroad all mapping ships. 相似文献
15.
16.
海底表层沉积物具有多相、多颗粒、多形态的组成结构，导致其声学特性复杂多样。通过分析压缩波速度和切变波速度特性的研究现状，指出有待于解决的科学问题和关键技术问题。在分析国内外有关海底沉积层声速特性研究基础上，提出采取系统、可控的实验测量手段解决当前测量存在的4点问题。综合分析了压缩波速度和切变波速度存在的统计回归关系和理论分析关系，探讨了当前地声反演、采样样品声学测量、原位声学测量3种方法存在的测量尺度、测量频率、测量状态等的差异，探讨建立不同测量方法和测量技术对测量结果进行统一性解释的方法，从而获得不同类型、不同区域的海底表层沉积物真实的声速特性。最后，从实验室声学测量、物理力学参数测量、流固耦合特性分析、原位测量及海底监测、采样测量与原位测量的误差分析及校正、海底大纵深声学测量6个方面提出技术需求，为提高声学探测海洋和海底的精度服务，推动海洋声学探测和海洋工程发展。 相似文献
17.
为研究小尺度海底沉积物样品的声衰减特性,作者提出了用声学探针测量海底沉积物声波幅值的新方法,对沉积物样品扰动小,两个测量点的距离可小于波长,为海底沉积物微观声衰减测量提供了新手段。作者用小于波长的间隔逐点测量了沉积物的压缩波幅值,数据分析表明沿沉积物柱状样全长的声衰减满足指数衰减模型。目前主要用同轴差距衰减测量法获得海底沉积物声衰减数据,但该方法不能辨识声衰减模型,因此不同海区的测量结果难以建立联系。对此作者又提出用声吸收系数反演的幅值比与声衰减系数反演的R值(两种幅值比的比值)作评价依据,分析了垂直轴差距衰减测量法获得的南海海底沉积物声衰减测量数据,发现部分沉积物样品声衰减的R值远大于1,其声衰减不满足指数衰减模型。在声衰减满足指数衰减模型的条件下,用Hamilton的声衰减和频率经验公式预报的南海沉积物声衰减比与作者用声学探针测量海底沉积物所得的声衰减比对比,通过对R值分析得出Hamilton的声衰减和频率经验公式可以预报南海沉积物声衰减比的范围。作者提出的声学探针测量海底沉积物声衰减的方法的优点是既能获得声衰减数据又能辨识声衰减模型,不同海区测量的沉积物声衰减比可用R值建立联系。 相似文献
18.
Hirata K. Aoyagi M. Mikada H. Kawaguchi K. Kaiho Y. Iwase R. Morita S. Fujisawa I. Sugioka H. Mitsuzawa K. Suyehiro K. Kinoshita H. Fujiwara N. 《Oceanic Engineering, IEEE Journal of》2002,27(2):170-181
A permanent real-time geophysical observatory using a submarine cable was developed and deployed to monitor seismicity, tsunamis, and other geophysical phenomena in the southern Kurile subduction zone. The geophysical observatory comprises six bottom sensor units, two branching units, a main electro-optical cable with a length of 240 km and two land stations. The bottom sensor units are: 1) three ocean bottom broadband seismometers with hydrophone; 2) two pressure gauges (PGs); 3) a cable end station with environmental measurement sensors. Real-time data from all the undersea sensors are transmitted through the main electro-optical cable to the land station. The geophysical observatory was installed on the continental slope of the southern Kurile trench, southeast Hokkaido, Japan in July 1999. Examples of observed data are presented. Sensor noises and resolution are mentioned for the ocean bottom broadband seismometers and the PGs, respectively. An adaptable observation system including very broadband seismometers is scheduled to be connected to the branching unit in late 2001. The real-time geophysical observatory is expected to greatly advance the understanding of geophysical phenomena in the southern Kurile subduction zone 相似文献
19.
20.
介绍了最新研制的基于液压驱动贯入的自容式海底沉积声学原位测量系统及其在南黄海中部海底沉积声学调查中的应用。该系统可以实现对海底沉积物声速和声衰减系数进行原位测量,通过液压驱动装置将四根声学探杆匀速贯入到海底沉积物中,减少了对沉积物的扰动,可按照预设的工作参数在海底全自动工作,无需甲板上人员实时控制,采集的声波信号自容式存储于存储单元。系统工作水深为500 m,测量深度为1 m,测量频率为30 kHz,采样频率为10 MHz。使用该系统在南黄海中部获得了40个站位不同类型沉积物的声学特性原位测量数据,并使用CTD剖面仪对该系统声速测量进行了标定,相对误差均小于0.5%,表明该系统测量数据准确、可靠。 相似文献