首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
P. Thomas  J. Veverka 《Icarus》1977,30(3):595-597
The preliminary conclusion of the Mariner 9 Television Team that the surfaces of Phobos and Deimos are saturated with craters larger than 0.2 km in diameter is reconsidered on the basis of more extensive and uniform crater counts. For Phobos, it is verified that the surface appears saturated with craters larger than 1 km in diameter. For craters smaller than 1 km, the data points fall below the saturation curve, and it is not clear that all the departure can be explained in terms of loss of resolution. For Deimos, because of the paucity of craters visible in the Mariner 9 images, a statistically meaningful crater density curve cannot be constructed. Definitive crater density curves for subkilometer craters can only be established once additional imagery at a resolution of better than 100 m is obtained. Such imagery will be provided by the 1976 Viking Orbiters.  相似文献   

2.
The density of craters larger than 1 km in diameter has been determined for the entire surface of Phobos, and half that of Deimos. Densities of craters as small as 10 m on Phobos and 5 m on Deimos have been measured for small areas of the satellites. On both objects, crater densities are similar and yield plots which have slopes close to -1.9 on both incremental and cumulative log-log graphs. These densities are close to those expected to obtain under equilibrium conditions. They are also near the maximum predicted, based on the fragmentation lifetimes of the two objects: that is, the densities are near to the maximum possible before such objects are likely to suffer an impact severe enough to disrupt them. While the observed crater densities cannot be converted to absolute ages in any rigorous fashion, they can be understood if the flux at Mars has been similar to that at the Moon and if the surfaces that we see today generally date back to the end of the period of heavy bombardment some 4 billion years ago. It is extremely unlikely that the surfaces are younger than 1 billion years. There are no large areas on Phobos for which crater densities differ by more than a factor of 3 from the average.  相似文献   

3.
Abstract— The global high‐resolution imaging of asteroid 433 Eros by the Near‐Earth Asteroid Rendezvous (NEAR) Shoemaker spacecraft has made it possible to develop the first comprehensive picture of the geology of a small S‐type asteroid. Eros displays a variety of surface features, and evidence of a substantial regolith. Large scale facets, grooves, and ridges indicate the presence of at least one global planar structure. Directional and superposition relations of smaller structural features suggest that fracturing has occurred throughout the object. As with other small objects, impact craters dominate the overall shape as well as the small‐scale topography of Eros. Depth/diameter ratios of craters on Eros average ~0.13, but the freshest craters approach lunar values of ~0.2. Ejecta block production from craters is highly variable; the majority of large blocks appear to have originated from one 7.6 km crater (Shoemaker). The interior morphology of craters does not reveal the influence of discrete mechanical boundaries at depth in the manner of craters formed on lunar mare regolith and on some parts of Phobos. This lack of mechanical boundaries, and the abundant evidence of regolith in nearly every high‐resolution image, suggests a gradation in the porosity and fracturing with depth. The density of small craters is deficient at sizes below ~200 m relative to predicted slopes of empirical saturation. This characteristic, which is also found on parts of Phobos and lunar highland areas, probably results from the efficient obliteration of small craters on a body with significant topographic slopes and a thick regolith. Eros displays a variety of regolith features, such as debris aprons, fine‐grained “ponded” deposits, talus cones, and bright and dark streamers on steep slopes indicative of efficient downslope movement of regolith. These processes serve to mix materials in the upper loose fragmental portion of the asteroid (regolith). In the instance of “ponded” materials and crater wall deposits, there is evidence of processes that segregate finer materials into discrete deposits. The NEAR observations have shown us that surface processes on small asteroids can be very complex and result in a wide variety of morphologic features and landforms that today seem exotic. Future missions to comets and asteroids will surely reveal still as yet unseen processes as well as give context to those discovered by the NEAR Shoemaker spacecraft.  相似文献   

4.
Stereogrammetric measurement of the shape of Eros using images obtained by NEAR's Multispectral Imager provides a survey of the major topographic features and slope processes on this asteroid. This curved asteroid has radii ranging from 3.1 to 17.7 km and a volume of 2535±20 km3. The center of figure is within 52 m of the center of mass provided by the Navigation team; this minimal difference suggests that there are only modest variations in density or porosity within the asteroid. Three large depressions 10, 8, and 5.3 km across represent different stages of degradation of large impact craters. Slopes on horizontal scales of ∼300 m are nearly all less than 35°, although locally scarps are much steeper. The area distribution of slopes is similar to those on Ida, Phobos, and Deimos. Regions that have slopes greater than 25° have distinct brighter markings and have fewer large ejecta blocks than do flatter areas. The albedo patterns that suggest downslope transport of regolith have sharper boundaries than those on Phobos, Deimos, and Gaspra. The morphology of the albedo patterns, their lack of discrete sources, and their concentration on steeper slopes suggest transport mechanisms different from those on the previously well-observed small bodies, perhaps due to a reduced relative effectiveness of impact gardening on Eros. Regolith is also transported in talus cones and in connected, sinuous paths extending as much as 2 km, with some evident as relatively darker material. Talus material in at least one area is a discrete superposed unit, a feature not resolved on other small bodies. Flat-floored craters that apparently contain ponded material also suggest discrete units that are not well mixed by impacts.  相似文献   

5.
Peter Thomas 《Icarus》1979,40(2):223-243
Viking Orbiter images have provided nearly complete coverage of the two satellites of Mars and have been used to construct maps of the surface features of Phobos and Deimos. The satellites have radically different appearances although nearly all features on both objects were formed directly or indirectly by impact cratering. Phobos has an extensive network of linear depressions (grooves) that probably were formed indirectly by the largest impact recorded on Phobos. Deimos lacks grooves as well as the large number of ridges that occur on Phobos. Craters on Deimos have substantial sediment fill; those on Phobos have none. Evidence of downslope movement of debris is prominent on Deimos but is rare on Phobos. Many of the differences between Phobos and Deimos may be caused by modest differences in mechanical properties. However, the lack of a very large crater on Deimos may be responsible for its lack of grooves.  相似文献   

6.
This paper considers morphologic signatures of mass-wasting processes on the surface of Phobos. Two types of downslope movement of material are distinguished: (i) intracrater volume landslides inside impact craters and (ii) downslope near-surface movement of material. Crater statistics for the Stickney area (based on new images of Phobos) showed that the landslide in the crater Stickney could have been formed after resurfacing of the outer rim of the crater in the process of meteorite bombardment. An estimate of the volume of the landslide in Stickney (1–2 km3) and simulation of its movement allowed us to classify the landslide as a long-runout one. The possibility of forming a hummocky topographic relief to the east of Stickney due to the crater ejecta and the emplacement of the frontal part of the long-runout landslide is discussed.  相似文献   

7.
A polyhedron can model irregularly shaped objects such as asteroids, comet nuclei, and small planetary satellites. With minor effort, such a model can incorporate important surface features such as large craters. Here we develop closed-form expressions for the exterior gravitational potential and acceleration components due to a constant-density polyhedron. An equipotential surface of Phobos is illustrated.  相似文献   

8.
Analysis of disk resolved images of Phobos obtained by the Phobos 2 spacecraft allows us to study the surface scattering law and albedo variations. From low phase angle images we find variations in local geometric albedo approximately 10%, with a correlation length approximately 1km. The scattering law is reasonably well matched by the recent proposed LPI (Lumme et al. 1990a) model, which allows us to deduce a small scale (approximately 1 mm) surface roughness (approximately 0.5), defined here as the rms. tangent of the local surface normal relative to the mean surface normal in the Duxbury (1991) model of Phobos. This value is very close to what has been found for Mercury and the Moon.  相似文献   

9.
J. Goguen  J. Veverka  T. Duxbury 《Icarus》1979,37(2):377-388
The Viking Orbiters have obtained several images of Phobos at large phase angles in which the portion of the satellite not directly illuminated by the Sun is faintly visible. A photometric analysis of one such image is presented to prove that the phenomenon is real and can be explained by Marsshine (i.e., the illumination of Phobos by sunlight reflected from Mars). Such images provide cross sections of Phobos and are useful in determining the true shape and size of the satellite. The cross section observed in Picture 111A03 agrees closely with that predicted by triaxial ellipsoid model of Phobos developed by Duxbury (1974).  相似文献   

10.
The simulation has shown that the regolith layers several hundred meters thick can be formed on the small satellites of planets of Phobos and Deimos type providing that almost all the material lost at meteorite impacts return to the satellite. The existence of a global layer on Deimos that filled the craters for the depth of about 5 m can be explained by the crater presence of diameter of about 4 km and the age of less than 350 Myr on its hemisphere almost unstudied. Dust belts with dust concentration by 3 orders greater than round the Earth can exist in the region of satellite orbits.  相似文献   

11.
P. Thomas  J. Veverka 《Icarus》1979,40(3):394-405
The characteristics of the grooves on Phobos indicate that these features were formed by a large impact—an observation which implies that grooves may occur on other small bodies. Published data on fragmentation experiments suggest that the energy of the impact which produced the grooves on Phobos was in a critical range, strong enough to produce fracturing at large distances from the crater, but too weak to fragment the object. Other small bodies, such as asteroids, which have experienced an impact flux sufficient to include one such critical cratering event should show grooves, unless they have been fragmented subsequently by a more severe impact. We estimate that between 112thand14th of asteroids smaller than 100 km in diameter may have surface features resembling grooves associated with large impact craters. Several morphologically distinct types of grooves can be expected, depending on the thickness and composition of the regolith of the parent body. The full development of Phobos-like grooves seems to require a thick, and possibly volatile-rich, regolith—conditions which might obtain on certain C-asteroids.  相似文献   

12.
We determined the morphologies and dimensions of possible impact craters on the surface of Asteroid 25143 Itokawa from images taken by the Hayabusa spacecraft. Circular depressions, circular features with flat floors or convex floors, and circular features with smooth surfaces were identified as possible craters. The survey identified 38 candidates with widely varying morphologies including rough, smooth and saddle-shaped floors, a lack of raised rims and fresh material exposures. The average depth/diameter ratio was 0.08±0.03: these craters are very shallow relative to craters observed on other asteroids. These shallow craters are a result of (1) target curvature influencing the cratering process, (2) raised rim not being generated by this process, and (3) fines infilling the craters. As many of the crater candidates have an unusual appearance, we used a classification scheme that reflects the likelihood of an observed candidate's formation by a hypervelocity impact. We considered a variety of alternative interpretations while developing this scheme, including inherited features from a proto-Itokawa, spall scars created by the disruption of the proto-Itokawa, spall scars following the formation of a large crater on Itokawa itself, and apparent depressions due to random arrangements of boulders. The size-frequency distribution of the crater candidates was close to the empirical saturation line at the largest diameter, and then decline with decreasing diameter.  相似文献   

13.
A new nomenclature for Martian regions and topographic features uncovered by Mariner 9, as officially adopted by the International Astronomical Union, is described. About 180 craters, generally of diameters >100 km, have been named, as well as 13 classes of topographic features designated catena, chasma, dorsum, fossa, labyrinthus, mensa, mons, patera, planitia, planum, tholus, vallis, and vastitas. In addition seven craters and the Kepler Dorsum are named on Phobos, and two craters on Deimos. Coordinates and maps of each named features are displayed.  相似文献   

14.
Palimpsests are large, circular, low-relief impact scars on Ganymede and Callisto. These structures were poorly understood based on Voyager-era analysis, but high-resolution Galileo images allow more detailed inspection. We analyze images of four Ganymedean palimpsests targeted by Galileo: Memphis and Buto Faculae, Epigeus, and Zakar. Ganymedean craters and Europan ring structures are used as tools to help better understand palimpsests, based on morphologic similarities. From analysis of Galileo images, palimpsests consist of four surface units: central plains, an unoriented massif facies, a concentric massif facies, and outer deposits. Using as a tie point the location in these structures where secondary craters begin to appear, outer deposits of palimpsests are analogous to the outer ejecta facies of craters; the concentric massif facies of palimpsests are analogous to the pedestal facies of craters; and the unoriented massif facies and central plains are analogous to crater interiors. These analogies are supported by the presence of buried preexisting structure beneath the outer two and absence of buried structure beneath the inner two units. Our observations indicate that palimpsest deposits represent fluidized impact ejecta, rather than cryovolcanic deposits or ancient crater interiors.  相似文献   

15.
Material is ejected from impact craters in ballastic trajectories; it impacts first near the crater rim and then at progressively greater ranges. Ejecta from craters smaller than approximately 1 km is laid predominantly on top of the surrounding surface. With increasing crater size, however, more and more surrounding surface will be penetrated by secondary cratering action and these preexisting materials will be mixed with primary crater ejecta. Ejecta from large craters and especially basin forming events not only excavate preexisting, local materials, but also are capable of moving large amounts of material away from the crater. Thus mixing and lateral transport give rise to continuous deposits that contain materials from within and outside the primary crater. As a consequence ejecta of basins and large highland craters have eroded and mixed highland materials throughout geologic time and deposited them in depressions inside and between older crater structures.Because lunar mare surfaces contain few large craters, the mare regolith is built up by successive layers of predominantly primary ejecta. In contrast, the lunar highlands are dominated by the effects of large scale craters formed early in lunar history. These effects lead to thick fragmental deposits which are a mixture of primary crater material and local components. These deposits may also properly be named regolith though the term has been traditionally applied only to the relatively thin fine grained surficial deposit on mare and highland terranes generated during the past few billion year. We believe that the surficial highland regolith - generated over long periods of time - rests on massive fragmental units that have been produced during the early lunar history.  相似文献   

16.
The High-Resolution Imaging Science Experiment (HiRISE) onboard Mars Reconnaissance Orbiter (MRO) has been used to observe Phobos and Deimos at spatial scales of around 6 and 20 m/px, respectively. HiRISE (McEwen et al., JGR, 112, CiteID E05S02, DOI: 10.1029/2005JE002605, 2007) has provided, for the first time, high-resolution colour images of the surfaces of the Martian moons. When processed, by the production of colour ratio images for example, the data show considerable small-scale heterogeneity, which might be attributable to fresh impacts exposing different materials otherwise largely hidden by a homogenous regolith. The bluer material that is draped over the south-eastern rim of the largest crater on Phobos, Stickney, has been perforated by an impact to reveal redder material and must therefore be relatively thin. A fresh impact with dark crater rays has been identified. Previously identified mass-wasting features in Stickney and Limtoc craters stand out strongly in colour. The interior deposits in Stickney appear more inhomogeneous than previously suspected. Several other local colour variations are also evident.Deimos is more uniform in colour but does show some small-scale inhomogeneity. The bright “streamers” (Thomas et al., Icarus, 123, 536–556,1996) are relatively blue. One crater to the south-west of Voltaire and its surroundings appear quite strongly reddened with respect to the rest of the surface. The reddening of the surroundings may be the result of ejecta from this impact.The spectral gradients at optical wavelengths observed for both Phobos and Deimos are quantitatively in good agreement with those found by unresolved photometric observations made by the Imager for Mars Pathfinder (IMP; Thomas et al., JGR, 104, 9055–9068, 1999). The spectral gradients of the blue and red units on Phobos bracket the results from IMP.  相似文献   

17.
18.
Observations of high resolution photographs of part of one of the prominent rays of the lunar crater Copernicus show that there is a concentration of small bright rayed and haloed craters within the ray. These craters contribute to the overall ray brightness; they have been measured and their surface distribution has been mapped. Sixty-two percent of the bright craters can be identified from study of high resolution photographs as concentric impact craters. These craters contain in their ejecta blankets, rocks from the lunar substrate that are brighter than the adjacent mare surface. It is concluded that the brightness of the large ray from the crater Copernicus is due to the composite effect of many small concentric impact craters with rocky ejecta blankets. If this is the dominant mechanism for the production of other rays from Copernicus and other large lunar craters, then rays may not contain significant amounts of ejecta from the central crater or from large secondary craters. They may in fact only reflect local excavation of mare substrate material by myriads of small secondary or tertiary impact craters.  相似文献   

19.
M. Noland  J. Veverka 《Icarus》1977,30(1):212-223
At least three large areas on the surface of Phobos are covered by a dark material of complex texture which scatters light according to the Hapke-Irvine Law. The average 20° to 80° intrinsic and disc-integrated phase coefficients of this material are βi = 0.020 ± 0.001 mag/deg and β = 0.033 mag/deg, respectively. These values are slightly greater than the values found for Deimos in Paper II (preceding article). On the largest scale the surface of Phobos is rougher than the surface of Deimos, perhaps accounting for the slightly greater phase coefficients. Contrary to the situation on Deimos, no definite regions of intrinsically brighter material are apparent on Phobos. This difference could account for the slightly lower average reflectance of Phobos relative to Deimos. No evidence for large exposures of solid rock has been found in the three areas studied.  相似文献   

20.
Automatic detection of sub-km craters in high resolution planetary images   总被引:4,自引:0,他引:4  
Impact craters are among the most studied geomorphic planetary features because they yield information about the past geological processes and provide a tool for measuring relative ages of observed geologic formations. Surveying impact craters is an important task which traditionally has been achieved by means of visual inspection of images. The shear number of smaller craters present in high resolution images makes visual counting of such craters impractical. In this paper we present a method that brings together a novel, efficient crater identification algorithm with a data processing pipeline; together they enable a fully automatic detection of sub-km craters in large panchromatic images. The technical details of the method are described and its performance is evaluated using a large, 12.5 m/pixel image centered on the Nanedi Valles on Mars. The detection percentage of the method is ∼70%. The system detects over 35,000 craters in this image; average crater density is , but localized spots of much higher crater density are present. The method is designed to produce “million craters” global catalogs of sub-km craters on Mars and other planets wherever high resolution images are available. Such catalogs could be utilized for deriving high spatial resolution and high temporal precision stratigraphy on regional or even planetary scale.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号