首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 562 毫秒
1.
A new petrogenetic grid is presented for the system NCKFMASH (Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O), in which Ca is incorporated in garnet, and CaAlNa−1Si−1 solid solution is considered for both the plagioclase and white-mica structures. A compatibility diagram for plagioclase-bearing metapelitic assemblages within the NCKFMASH system also has been derived. A dominant feature of the NCKFMASH grid is the singularities and associated singular reactions which occur along plagioclase+margarite- and plagioclase+paragonite-bearing univariant equilibria. The singularities represent compositional coplanarities which occur in response to the CaAlNa−1Si−1 substitution occurring at different rates in plagioclase and white-mica. This is controlled by a fundamental difference in the mixing within the two mineral structures. The singularities give rise to a number of intriguing phase diagram features, including azeotropes. From the results presented here, it is predicted that the occurrence of margarite and paragonite in pelitic rocks is controlled by equilibria related to the singularities. The presence of these white-micas is strongly dependent upon bulk composition, and plagioclase-bearing, margarite/paragonite-free assemblages, typical of Barrovian-type terranes, are predicted for bulk compositions of Mg/(Mg+Fe)≈0.4 and Ca/(Ca+Na)≈0.4 at for example 5.5  kbar.  相似文献   

2.
A recent thermodynamic model for the Na–Ca clinoamphiboles in the system Na2O–CaO–FeO–MgO–Al2O3–SiO2–H2O–O (NCFMASHO), is improved, and extended to include cummingtonite–grunerite and the orthoamphiboles, anthophyllite and gedrite. The clinoamphibole model in NCMASH is adopted, but the extension into the FeO- and Fe2O3-bearing systems is revised to provide thermodynamic consistency and better agreement with natural assemblage data. The new model involves order–disorder of Fe–Mg between the M2, M13 and M4 sites in the amphibole structure, calibrated using the experimental data on site distributions in cummingtonite–grunerite. In the independent set of end-members used to represent the thermodynamics, grunerite (rather than ferroactinolite) is used for FeO, with two ordered Fe–Mg end-members, and magnesioriebeckite (rather than ferritschermakite) is used for Fe2O3. Natural assemblage data for coexisting clinoamphiboles are used to constrain the interaction energies between the various amphibole end-members. For orthamphibole, the assumption is made that the site distributions and the non-ideal formulation is the same as for clinoamphibole. The data set end-members anthophyllite, ferroanthophyllite and gedrite, are used; for the others, they are based on the clinoamphibole end-members, with the necessary adjustments to their enthalpies constrained by natural assemblage data for coexisting clino- and orthoamphiboles. The efficacy of the models is illustrated with P – T grids and various pseudosections, with a particular emphasis on the prediction of mineral assemblages in ferric-bearing systems.  相似文献   

3.
The high- P , medium- T  Pouébo terrane of the Pam Peninsula, northern New Caledonia includes barroisite- and glaucophane-bearing eclogite and variably rehydrated equivalents. The metamorphic evolution of the Pouébo terrane is inferred from calculated P–T  and P–T  – X H2O pseudosections for bulk compositions appropriate to these rocks in the model system CaO–Na2O–FeO–MgO–Al2O3–SiO2–H2O. The eclogites experienced a clockwise P–T  path that reached P ≈19  kbar and T  ≈600  °C. The eclogitic mineral assemblages are preserved because reaction consequent upon decompression consumed the rocks' fluid. Extensive reaction occurred only in rocks with fluid influx during decompression of the Pouébo terrane.  相似文献   

4.
The solid-solid reaction magnesiocarpholite = sudoite + quartz has been bracketed between 350 and 500°C, 6.3 and 7.8 kbar. Because it is impossible to synthesize end-member sudoite, all experiments were carried out using natural minerals as starting materials. Although mineral compositions were very close to those of the end-members, the effect of the fluorine content in carpholite was significant. Particularly in those experiments where sudoite grows at the expense of carpholite, electron microprobe analysis of the run products shows that a more stable F-rich carpholite crystallizes too, and consumes the fluorine released in solution by the breakdown of the original carpholite.
Our experimental results are combined, through a thermodynamic analysis, with a previous data set and with previous experimental data concerning the relative stability of chlorite, talc and magnesiocarpholite with excess of quartz and water as a function of P–T and AlAl(SiMg)-1 substitutions in phyllosilicates. This allows us to constrain the feasible thermodynamic parameters (H°f, sud; S ° sud) and (H°f,car; S °car) for the Mg end-members. Using the partition coefficients calculated from natural parageneses, we have computed a petrogenetic grid for the system FeO–MgO–Al2O3–SiO2–H2O. It demonstrates that parageneses involving sudoite and carpholite can be used as indicators of P–T conditions, up to 600° C, 8 kbar for sudoite, and at higher pressure for carpholite.  相似文献   

5.
Two impure ultrahigh-pressure (UHP) marbles, a calcite marble with the peak assemblage Grt + Phe + Cpx + Rt + (Arg) and a dolomite marble with the peak assemblage Crn + Chl + Rt + Dol (±Arg), from the same lens from the polymetamorphic complex of the Brossasco-Isasca Unit (BIU) (southern Dora-Maira Massif) have been petrologically investigated and modelled by calculating P – T phase-diagram projections for H2O–CO2 mixed-volatile systems. Thermobarometric data obtained from the calcite marble suggest Alpine peak conditions in the diamond stability field (4.0 GPa at 730 °C), and allow reconstruction of the earlier portion of the Alpine retrograde P – T path, which is characterized by a significant decompression coupled with a moderate and continuous cooling to 650 °C at 2.50 GPa. The modelled fluid compositions at peak conditions point to 0.025 ≤  X (CO2) ≤ 0.10 and X (CO2) ≤ 0.0012 in the calcite marble and dolomite marble, respectively, suggesting fluid heterogeneity at the local scale and an internally buffered fluid evolution of the studied impure marbles. The lack of micro-diamond in the BIU marbles is explained by the very-low X (CO2) values, which favoured relatively high f O2-conditions, preventing the formation of diamond at the UHP peak metamorphic conditions.  相似文献   

6.
Expanded sedimentary records from the Tethys reveal unique faunal and isotopic changes across the Palaeocene-Eocene (P-E) transition. Unlike in the open oceans, the Tethys exhibits a gradual decrease of 1.5% in δ13C values prior to the rapid δ13C excursion. Associated with the 613C excursion is a decrease in calcite burial, increase in detrital content and appearance of a unique opportunistic planktic foraminifera1 assemblage (e.g. compressed acarininids). The existence of a prelude decrease in δ13C values in the Tethys suggests that the P-E δ13C excursion may have occurred in two steps and over a few hundred thousand years, rather than as one step over a few thousand years as previously suggested. This slower excursion rate is readily explained by changing organic carbon weathering or burial rates and avoids the need of invoking ad hoc scenarios.  相似文献   

7.
Independent lines of geological evidence suggest that fluctuations in the Mg/Ca ratio of seawater between 1.0 and 5.2 have caused the oceans to alternate between favouring the precipitation of the aragonite and high-Mg calcite polymorphs of calcium carbonate ( m Mg/Ca > 2; aragonite seas) and the low-Mg calcite polymorph ( m Mg/Ca < 2; calcite seas) throughout Phanerozoic time. The rise of aragonite-secreting bryopsidalean algae as major producers of carbonate sediments in middle Palaeogene time, a role that they maintained through to the present, has been attributed to a transition from calcite-to-aragonite seas in early Cenozoic time. Recent experiments on the modern, carbonate-sediment-producing bryopsidales Halimeda , Penicillus and Udotea reveal that their rates of calcification, linear extension and primary production decline when reared in experimental calcite seawaters ( m Mg/Ca < 2). These normally aragonite-secreting algae also began producing at least one-quarter of their CaCO3 as calcite under calcite sea conditions, indicating that their biomineralogical control can be partially overridden by ambient seawater chemistry. The observation that primary production and linear extension declined along with calcification in the mineralogically unfavourable seawater suggests that photosynthesis within these algae is enhanced by calcification via liberation of CO2 and/or H+. Thus, the reduced fitness of these algae associated with their low rates of calcification in calcite seas may have been exacerbated by concomitant reductions in tissue mass and algal height.  相似文献   

8.
A petrogenetic grid is presented for the system KFMASH (K2O-FeO-MgO-Al2O3-SiO2-H2O), including biotite, muscovite, K-feldspar, chlorite, chloritoid, staurolite, cordierite, garnet, orthoamphibole, orthopyroxene, spinel, andalusite, sillimanite, kyanite, quartz and corundum with H2O in excess, which was calculated using the computer program THERMOCALC and the Powell and Holland internally consistent thermodynamic dataset. By removing the normal constraint of having quartz in excess, both quartz-bearing and quartz-absent equilibria are shown. Quartz-absent equilibria are particularly relevant at high- T and low- P conditions, because of their common occurrence at these conditions. The calculated mineral assemblage and mineral compositional variations in terms of FeMg-1 and (Fe, Mg)SiAl-2 exchange vectors are broadly compatible with observations on natural rocks, particularly when non-KFMASH components are taken into account.  相似文献   

9.
The cathodoluminescence analyses of the trigonal carbonates calcite and dolomite have been applied intensively in sedimentary petrology for a long time and the properties of these minerals are well-known, but much less attention has been paid to aragonite. In this study, the cathodoluminescence behaviour and the trace element composition of natural and synthetic aragonite have been studied employing trace element analyses (proton induced X-ray emission) and luminescence spectroscopy. Aragonite doped with Mn2+ has been synthesized in a NH4+–Mg2+–Ca2+–Cl− solution in contact with a CO2–H2O–NH3 atmosphere. The low effective distribution coefficients indicate a rapid growth of the crystals of millimetre size which occurred within hours or days. The natural aragonite samples contain Mn, Fe and Sr in different concentrations. The Mn-bearing aragonites exhibit a bright green luminescence which is caused by a strong emission band at 575 nm with a half-width of about 84 nm. The luminescence intensity shows a strong positive correlation with Mn in aragonite when Fe and Mn do not exceed 2000 p.p.m. The intensity is depressed if the concentration of these elements exceeds the critical values. In the shell of a recent Unio sp., the luminescence intensity deviates from the linear correlation, although the trace element contents are not too high; this is probably an effect of quenching by organic material between the crystallites of the biogenic aragonite.  相似文献   

10.
The equilibrium constant, K a, of the association reaction to form ion pairs from charged solute species in supercritical solutions can be calculated from a model based on published equations. Log K a at constant pressure is a linear function of the inverse in the dielectric constant of the fluid times temperature. The dielectric properties of H2O and CO2 at supercritical pressures and temperatures can also be evaluated using the Kirkwood equation. Using Looyenga mixing rules, the dielectric constant of H2O–CO2 mixtures can be obtained and the change in log K a with addition of CO2 in aqueous solutions evaluated. These changes in log K a with addition of CO2 are consistent with measured changes of log K a with addition of Ar in supercritical H2O–Ar solutions.
Log K a of KCl and NaCl increase to an increasing extent as the mole fraction of CO2 increases in H2O–CO2 solutions. For instance, at 2 kbar and constant temperature between 400 and 600° C, log K a of KCl increases by about two orders of magnitude whilst that of NaCl increases by over four orders of magnitude as the CO2 mole fraction increases from 0.0 to 0.35. Such changes in log K a will have dramatic effects on the solubility of minerals in CO2-rich environments.  相似文献   

11.
Calcsilicate granulites of probable Middle Proterozoic age ( c .1000–1100  Ma) in the vicinity of Battye Glacier, northern Prince Charles Mountains, East Antarctica, contain prograde metamorphic assemblages comprising various combinations of wollastonite, scapolite, clinopyroxene, An-rich plagioclase, calcite, quartz, titanite and, rarely, orthoclase, ilmenite, phlogopite and graphite. Comparison of the prograde assemblages with calculated and experimentally determined phase relations in the simple CaO–Al2O3–SiO2–CO2–H2O system suggests peak metamorphism at ≥835 °C in the presence (in wollastonite-bearing assemblages at least) of a CO2-bearing fluid ( X CO≥0.3) at a probable pressure of 6–7  kbar.
Well-preserved retrograde reaction textures represent: (1) breakdown of scapolite to anorthite+calcite±quartz; (2) formation of grossular–andradite garnet and, locally, (3) epidote, both principally by reactions involving scapolite breakdown products and clinopyroxene; (4) local coupled replacement of clinopyroxene and ilmenite by hornblende and titanite, respectively; and finally (5) local sericitization of prograde and retrograde plagioclase. These retrograde reactions are interpreted to be the result of cooling and variable infiltration by H2O-rich fluids, possibly derived from crystallizing pegmatitic intrusions and segregations that may be partial melts, which are common throughout the area.  相似文献   

12.
A method for the selective separation of Ag, Cd, Cr, Cu, Ni, Pb and Zn in traces from solutions of calcite (CaCO3), dolomite (CaMg(CO3)2) and gypsum (CaSO4.2H2O) before their determination by inductively coupled plasma-atomic emission spectrometry (ICP-AES) is presented. The expected interferences of Ca and Mg on intensities of trace analytes were removed by collecting the elements of interest with cobalt(III) hexamethylenedithiocar-bamate, Co(HMDTC)3. The flotation of aqueous solutions (1 l) of calcite, dolomite and gypsum was performed at pH 6.0, by 1.5 mg l−1 Co and 0.6 mmol l−1 HMDTC−. To minimise the effect of the reaction between Ca/Mg, which restrains the function of the surfactant, careful selection of the most suitable foaming reagent was necessary. The accuracy of the method was established by analysing natural alkaline-earth minerals by the standard addition method as well as using the dolomite reference materials GBW 07114 and GSJ JDo-1. The ICP-AES limits of detection following flotation on different minerals were found to be 0.080 μg g−1 for Cd, 0.105 μg g−1 for Ag, 0.142 μg g−1 for Cu, 0.195 μg g−1 for Cr, 0.212 μg g−1 for Ni, 0.235 μg g−1 for Zn and 0.450 μg g−1 for Pb.  相似文献   

13.
ABSTRACT
The mineralogy and isotope geochemistry of carbonate minerals in the Coorong area are determined by the water chemistry of different depositional environments ranging from seawater to evaporitically modified continental water. The different isotopic compositions of coexisting calcite and dolomite suggest that each of the above two minerals was formed from water of composition and origin unique to that specific mineral. In addition, the dolomite was not formed by simple solid state cation exchange.
The occurrence of two types of dolomite was shown by isotope analysis and SEM observations. The dolomite, which is isotopically light (δ13C = -1 to -2% 0 ; δ18O=+3 to +5%0) and of fine grain size (˜ 0·5 μm) probably precipitated under the influence of evaporitically modified continental water. Coarser grained dolomite (up to 4 μm) is isotopically heavier (δ13C=+3 to +4%0; δ18O=+5 to + 6%0) contains Mg in excess of Ca and was formed in or close to equilibrium with atmospheric CO2 probably by the dolomitization of aragonite.  相似文献   

14.
A thermodynamic model for titanium and ferric iron solution in biotite   总被引：6，自引：1，他引：5  
Recent crystallographic data indicate that in biotite Ti orders preferentially onto the M2 octahedral site rather than onto the M1 site as assumed in previous solution models for K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O2 (KFMASHTO) biotite. In view of these data, we reformulate and reparameterize former biotite solution models. Our reparameterization takes into account Fe–Mg order–disorder and ferric iron contents of natural biotite as well as both natural and experimental observations on biotite Ti-content over a wide range of physicochemical conditions. In comparison with previous biotite models, the new model reproduces the Ti-content and stability field of biotite as constrained by experiments with significantly better accuracy. The predictive power of the model is tested by comparison with petrologically well-characterized natural samples of SiO2-saturated and SiO2-undersaturated rocks that were not used in the parameterization. In all these tests, the reformulated model performs well.  相似文献   

15.
Zachariah 《地学学报》1998,10(6):312-316
A marble band in the ≈ 2.75 Gyr old Ramagiri schist belt in the Dharwar craton of south India gave a Pb–Pb age of 3.075 ± 0.095 Gyr. The geochemical data, including high Sr and low Ba and Mn indicate seawater origin for the parent rock, and that there was insignificant geochemical exchange between the marble and the surrounding rocks. The calculated initial Nd isotopic composition and μ1 indicate an older continental crustal source for the Nd and Pb. The initial 87Sr/86Sr of the marble is 0.70128, which is higher than the calculated mantle value at ≈ 3 Ga. Although pre-3 Gyr old marine carbonate rocks are thought to be buffered by mantle Sr, the Ramagiri marble contains evolved, crustal Sr. Despite this, the marble has the lowest measured 87Sr/86Sr among carbonates and represents one of the least radiogenic periods in seawater Sr isotope composition.  相似文献   

16.
Low-pressure granulite facies metasedimentary gneisses exposed in MacRobertson Land, east Antarctica, include hercynitic spinel-bearing metapelitic gneisses. Peak metamorphic mineral assemblages include spinel + rutile + ilmenite + sillimanite + garnet, spinel + ilmenite + sillimanite + garnet + cordierite, ortho-pyroxene + magnetite + ilmenite + garnet, spinel + cordierite + biotite + ilmenite and orthopyroxene + cordierite + biotite, each with quartz, K-feldspar and melt. The presence of garnet + biotite- and cordierite + orthopyroxene-bearing assemblages implies crossing tie-lines in AFM projection for the K2O-FeO-MgO-Al2O3-SiO2-H2O (KFMASH) system. This apparent contradiction, and the presence of spinel, rutile and ilmenite in the assemblages, is acounted for by using the KFMASH-TiO2-O2 system, i.e. AFM + TiO2+ Fe2O3. We derive a petrogenetic grid for this system, applicable to low-pressure granulite facies metamorphic conditions. Retrograde assemblages are interpreted from corona textures on hercynitic spinel and Fe-Ti oxides. The relative positions of the peak and retrograde metamorphic assemblages on the petrogenetic grid suggest that corona development occurred during essentially isobaric cooling.  相似文献   

17.
Abstract This, the first two papers, sets out the philosophy and methods of determining an internally consistent thermodynamic dataset for minerals using the least squares method. The applicability of the least squares method is discussed, and it is applied to a small set of experimental equilibria in the system Na2O–Al2O3–SiO2–H2O. The importance is stressed of defining not only the enthalpies of formation of minerals, but also the uncertainties and the correlations among them. The system which has been used as an illustration for this paper serves as a visual guide to the method, as it is small enough to represent graphically in two dimensions. In the paper which follows, we extend the method to a system of 60 equations (experimentally determined equilibria) involving 34 unknowns (enthalpies of formation of mineral end-members).  相似文献   

18.
ABSTRACT Calcites and dolomites from the late Precambrian Bonahaven Formation of Scotland exhibit luminescence when MnCO3>0.03 wt % (dolomite) or >0.06 wt % (calcite) and FeCO3<2-2-5 wt % (dolomite). Comparison with other published data shows close similarity in the position of Fe-quenching in dolomite, but more variability in the position of Mn-activation in calcites and dolomites and the onset of Fe-quenching in calcites. These anomalies are thought to relate to chemical controls subsidiary to the dominant factors of Fe and Mn concentration. It is not practical to make a useful comparison between operating conditions of different luminescence instruments because of differences in design and an inability to measure routinely the current actually on the specimen surface.  相似文献   

19.
Refinements have been made to achieve over 99% yield in the conversion of CO to CO2 in order to improve the reproducibility and accuracy of δ18 O measurements in sulfates. BaSO4 (10-15 mg) was mixed with an identical amount of spectrographic-grade graphite and loaded into a Pt boat. The mixture was gradually heated to 1100 °C to reduce sulfate to CO and CO2; the former gas was simultaneously converted to CO2 by a glow discharge between Pt electrodes immersed in a magnetic field (produced by a pair of external neodymium magnets). A small memory effect was noticed during the analysis (less than 0.3‰ per 10‰ difference in δ18 O between two subsequently analysed samples). The memory effect, however, was suppressed by repetitive preparation of the same specimen. CO2 produced in this way from sulfate reference samples was analysed on a dual inlet and triple collector mass spectrometer along with CO2 equilibrated with VSMOW, GISP and SLAP water reference samples. To avoid large departures of measured isotope ratios from 18O/16O of the working calibrator we used CO2 gas prepared from ocean water sulfate for this purpose. The calibrated δ18 O values (in ‰) obtained in this way for NBS-127, IAEA SO-5 and IAEA SO-6 reference materials were 8.73 ± 0.05, 12.20 ± 0.07 and -10.43 ± 0.12, respectively.  相似文献   

20.
Determinations of the absolute age of cleavage formation can provide fundamental information about the evolution of orogenic belts. However, when applied to cleavages in slates and phyllites, conventional dating methods are complicated by problems related to mineral separation and the presence of multiple cleavage generations. In situ high-spatial-resolution 40Ar/39Ar laser microprobe geochronology and microstructural observations indicate that the age of cleavage formation in slates and phyllites can be constrained by analysing zones of tightly packed cleavage domains. Three regionally developed cleavages (S2, S3, and S4) are present in the northern Taconic Allochthon of Vermont and New York. Representative samples were studied from a variety of localities where these cleavages, which are defined by white micas, are well developed. In the suite of samples, only S3 and S4 are expressed as domains that are sufficiently wide and spatially isolated in thin section to permit quantitative 40Ar/39Ar geochronology. Mean 40Ar/39Ar laser microprobe ages for these domains are 370.7 ± 1.0 Myr for S3 and 345.5 ± 1.7 Myr for S4. Because estimates of the Ar closure temperature for white micas are substantially higher than the inferred growth temperatures of the micas defining S3 and S4, these values are interpreted as periods since cleavage formation. This interpretation is consistent with independent geochronological constraints on the age of the Acadian orogeny in the region.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号