共查询到20条相似文献，搜索用时 78 毫秒
1.
2.
从微藻粒径大小、饵料密度以及营养价值角度，选取牟氏角毛藻（Chaetoceros muelleri）、亚心形扁藻（Platymonas subcordiformis）、球等鞭金藻（Isochrysis galbana）分别作为硅藻、绿藻和金藻的代表，开展了不同规格的香港巨牡蛎对3种微藻在同等密度、同等生物量混合条件下的摄食选择性研究。结果显示，香港巨牡蛎在两种不同混合藻条件下对3种不同微藻摄食选择性有显著性差异（P<0.01）。3种藻相同密度混合条件下，大、中、小3种规格香港巨牡蛎更倾向摄食粒径较大的亚心形扁藻，且贝类规格越大选择倾向性越低，摄食选择效率分别为0.32、0.35、0.48，对球等鞭金藻无明显选择性。3种藻等生物量混合条件下，香港巨牡蛎对亚心形扁藻和球等鞭金藻的摄食有选择性，且规格大小对选择效率影响显著（P<0.01），个体越小选择性越强，小规格香港巨牡蛎倾向滤食亚心形扁藻（P<0.01），大、中规格更倾向摄食粒径较小的球等鞭金藻。两种混合条件下，香港巨牡蛎都对牟氏角毛藻都有负的选择效率，而且牟氏角毛藻密度越高负值绝对值越大。微藻的细胞大小、形状、营养价值以及香港巨牡蛎的个体大小都对摄食选择性有着明显的影响，香港巨牡蛎的摄食选择性在现场海区中还明显受到生境及食物条件的限制。 相似文献
3.
饵料浓度、温度对缢蛏能量代谢的影响 总被引：1，自引：0，他引：1
本文以缢蛏（Sinonovacula constricta）为实验对象,使用实验室静水法,研究其在不同饵料浓度、温度梯度下的代谢情况,测定其摄食、呼吸、排粪、排泄等生理参数,并根据能量平衡原理估算了缢蛏的能量收支情况。结果表明:（1）缢蛏的摄食能、呼吸能、排泄能随饵料浓度的上升而增加;随着温度的变化,其摄食能呈峰值性改变,呼吸能和排泄能有缓慢增长趋势;（2）缢蛏从球等鞭金藻（Isochrysis sphaeric）中摄取的有机碳源主要通过呼吸代谢消耗,以粪便的形式排出,少部分随排泄代谢产物流出,余下的碳主要用作贝类自身的生长;（3）单因素方差分析表明,饵料浓度和温度均显著影响缢蛏的摄食率和耗氧率（P<0.05）,温度为23℃时,缢蛏的摄食率和耗氧率在饵料浓度为3.0×105 cells/mL时达到最高;饵料浓度为3.0×105 cells/mL时,缢蛏的摄食率在23℃时达到最大值,而耗氧率和排氨率在31℃时达到最高。 相似文献
4.
香港巨牡蛎对3种浮游植物摄食率和滤清率的研究 总被引：1，自引：1，他引：0
本文在室内条件下研究了大、中、小3种规格的香港巨牡蛎（Crassostrea hongkongensis）对牟氏角毛藻（Chaetoceros muelleri）、亚心形扁藻（Platymonas subcordiformis）、球等鞭藻（Isochrysis galbana）3种浮游植物在同等密度、同等生物量条件下的摄食率和滤清率,探讨了香港巨牡蛎对3种浮游植物的摄食差异及其影响因素。结果表明,在28℃水温条件下,香港巨牡蛎的单位个体滤清率和单位体质量滤清率分别为1.40~8.94 L/（ind·h）和0.86~3.17 L/（g·h）,等密度和等生物量浮游植物条件下香港巨牡蛎均表现出单位个体滤清率由高到低依次为:大规格、中规格、小规格;不同规格香港巨牡蛎的单位体质量滤清率相近。相同藻类密度条件下,香港巨牡蛎的单位体质量滤清率由高到低依次为:亚心形扁藻、球等鞭金藻、牟氏角毛藻;相同生物量条件下,香港巨牡蛎对3种浮游植物单位体质量滤清率由高到低依次为:球等鞭金藻、亚心形扁藻、牟氏角毛藻。香港巨牡蛎对不同浮游植物种类和密度的滤清率、摄食率差异主要是受饵料的大小、营养质量和密度等因素影响。 相似文献
5.
6.
采用实验生态学方法，通过分析摄食喜好系数、平均个体摄食量等参数，研究香螺（Neptunea arthritica cumingii）摄食选择性，以及温度、饵料状态对香螺摄食量的影响。结果表明，香螺成螺对不同的饵料具有明显的摄食选择性，喜食程度的顺序依次为缢蛏（Sinonovacula constricta）、菲律宾蛤仔（Ruditapes philippinarum）和毛蚶（Scapharca subcrenata）。随着温度的升高，不同规格香螺摄食量先升高后降低，摄食高峰出现在15℃，香螺对于已开壳饵料的摄食量显著高于未开壳饵料。 相似文献
7.
藻类浓度对海湾扇贝和太平洋牡蛎滤除率的影响 总被引：10，自引：1，他引：9
滤除率(单位时间水中食物颗粒完全被滤食的这些过滤的水的体积)不仅能够表示滤食性动物的摄食量,还是反映滤食性动物生理生态学状况的动态指标,它的大小受诸多因子的影响,其中藻类浓度是一个重要的影响因子。关于藻类浓度对贝类滤除率的影响,国外Beiras,R.等(1993)已有报道。本文着重研究了藻类浓度对我国大规模养殖的滤食性贝类——海湾扇贝(Argopectenirradians)和太平洋牡蛎(Cras-sostreagigas)滤除率的影响。1 材料和方法海湾扇贝取自青岛海洋大学太平角实验基地,太平洋牡蛎取自胶南市水产养殖研究所。随贝生长的不同时期取回后放玻… 相似文献
8.
菲律宾蛤仔稚贝摄食、呼吸和排泄率的研究 总被引：5，自引：0，他引：5
本文利用实验生态学的方法研究了不同温度对菲律宾蛤仔稚贝的呼吸、排泄的影响以及在25℃下菲律宾蛤仔稚贝对4种单细胞藻类的滤食率．实验结果表明，温度对菲律宾蛤仔稚贝耗氧率、排氨率有显著影响，菲律宾蛤仔稚贝在12-32℃范围内，排氨率随温度的升高呈峰值变化，在26℃排氨率达到最大值然后开始下降，耗氧率随温度的升高而增大，耗氧率（OR）和温度（t）的回归方程为：OR=0．0155e^0.696t，R^2=0．9291．O：N也随着温度的升高而升高，菲律宾蛤仔稚贝呼吸Q10平均3．8，排泄Q10平均是1．88．菲律宾蛤仔稚贝在单位时问内（g／h）对4种藻类的滤食率高低依次为扁藻〉小球藻〉金藻〉角毛藻，差异极显著（P〈0．01）。 相似文献
9.
在室内可控条件下,比较和分析了青岛大扁藻Tetrasemis helgolandica、球等鞭金藻Isochrysis galbana、角毛藻Chaetoceros calcitrans、微绿球藻Nannochloropsis oculata和绿色巴夫藻Pavlovaviridis5种微藻对泥蚶Tegillarca granosa、缢蛏Sinonovacula constricta、青蛤Cyclina sinensis和彩虹明樱蛤Moerella iridescens4种滩涂贝类稚贝生长的影响。结果显示,在培养初期(5~6 d),投喂不同微藻的稚贝实验样品生长速度差异并不明显,但培养9~10 d后,各实验组稚贝实验样品的生长速度开始出现明显差异:投喂角毛藻、球等鞭金藻的泥蚶和缢蛏稚贝实验样品及投喂角毛藻、青岛大扁藻的青蛤和彩虹明樱蛤稚贝实验样品,运动能力强,生长迅速、整齐,经过15~18 d的培养,成活率达85%以上;投喂微绿球藻的4种稚贝实验样品,运动能力弱,生长缓慢、不整齐,成活率低于20%。投喂角毛藻的泥蚶、缢蛏和青蛤稚贝实验样品的生长速度最快;投喂青岛大扁藻的彩虹明樱蛤稚贝实验样品的生长速度最快,而投喂角毛藻的彩虹明樱蛤稚贝实验样品的生长速度与之非常接近。角毛藻对泥蚶、缢蛏和彩虹明樱蛤稚贝实验样品的饵料效果最好,球等鞭金藻次之;青岛大扁藻对青蛤和彩虹明樱蛤稚贝实验样品的饵料效果与角毛藻非常接近,而青岛大扁藻对泥蚶和缢蛏稚贝实验样品的饵料效果较差;绿色巴夫藻的饵料效果与球等鞭金藻类似但均比球等鞭金藻差;微绿球藻的饵料效果最差。用颗粒粒度计数分析仪分析泥蚶和青蛤稚贝实验样品对5种微藻的选择性滤食后发现,最先被泥蚶稚贝实验样品滤食干净的是角毛藻,其后是球等鞭金藻;泥蚶稚贝实验样品开始滤食青岛大扁藻时的速度较慢,但当角毛藻和球等鞭金藻被滤尽后,青岛大扁藻也被迅速滤食,泥蚶稚贝实验样品滤食微绿球藻的速度最慢;最先被青蛤稚贝实验样品滤净的也是角毛藻,其后是青岛大扁藻,在角毛藻和青岛大扁藻被滤尽后,球等鞭金藻也迅速被滤食干净,微绿球藻同样是最慢被滤食的。可见,贝类稚贝总是优先滤食饵料效果好的微藻,饵料效果最差的微藻被贝类稚贝滤食的速度最慢。 相似文献
10.
本文在室内条件（水温２４－２８℃，盐度２８－３３。５）下以缢蛏鲜肉为饵料，对不同体长组斑节对虾的摄食量，生产速率问题进行研究，得出斑节对虾体长，体重与摄食量，摄食率，生长率和增重量的关系如下Ｗ 相似文献
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
13.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
14.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
15.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
16.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
17.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
18.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
19.
The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics. 相似文献
20.