共查询到20条相似文献，搜索用时 31 毫秒
1.
Three-dimensional liquid sloshing in a tank with baffles 总被引：1，自引：0，他引：1
Dongming Liu 《Ocean Engineering》2009,36(2):202-52
A numerical model has been developed to study three-dimensional (3D) liquid sloshing in a tank with baffles. The numerical model solves the spatially averaged Navier-Stokes equations, which are constructed on a non-inertial reference frame having six degree-of-freedom (DOF) of motions. The large-eddy-simulation (LES) approach is employed to model turbulence by using the Smagorinsky sub-grid scale (SGS) closure model. The two-step projection method is employed in the numerical solutions, aided by the Bi-CGSTAB technique to solve the pressure Poisson equation for the filtered pressure field. The second-order accurate volume-of-fluid (VOF) method is used to track the distorted and broken free surface. The baffles in the tank are modeled by the concept of virtual boundary force (VBF) method. The numerical model is first validated against the available analytical solution and experimental data for two-dimensional (2D) liquid sloshing in a tank without baffles. The 2D liquid sloshing in tanks with baffles is then investigated. The numerical results are compared with other results from available literatures. Good agreement is obtained. Finally, the model is used to study 3D liquid sloshing in a tank with vertical baffles. The effect of the baffle is investigated and discussed. 相似文献
2.
In this work the analysis of sloshing of water in rectangular open tanks has been extensively carried out. Two mathematical models are employed, respectively the Reynolds Averaged Navier Stokes Equations (RANSE) and the Shallow Water Equations (SWE). The RANSE are solved using a modified form of the well established MAC method (SIMAC) able to treat both the free surface motion and the viscous stresses over the rigid walls accurately. The Shallow Water Equations are solved by means of a simple and powerful algorithm (CE-SE) able to deal with large impacting waves over the tank walls.Successively, in order to validate the mentioned algorithms and for a better understanding of the sloshing phenomenon, experimental tests have been carried out using a 0.5 m breadth rectangular tank in periodic roll motion.It has been shown that RANSE provide more accurate solutions than SWE for small or moderate amplitudes of excitation. In particular in this paper it is proved that the shallow water approximation can be efficiently adopted within liquid depth to tank breadth RATIO = 0.15, when examining the sloshing problem. By increasing the water level inside the tank, results by SWE show large qualitative and quantitative disagreement with experiments. Nevertheless, in the case of large amplitude excitation, when sprays and large breaking waves are expected, SWE provide a fairly good estimate of the sloshing induced waves.Finally a simple baffle configuration inside the tank has been considered. By the analysis of numerical results, it has been observed that the presence of a vertical baffle at the middle of the tank dramatically changes the sloshing response compared to the unbaffled configuration. It produces a jump-like effect, resulting in a weak magnification of the dynamic loads on the vertical walls out of resonance, and a strong reduction of the dynamic loads in the resonance condition. 相似文献
3.
We investigated the use of numerical methods to predict liquid sloshing phenomena in a moving tank and compared our results to model test measurements. The numerical techniques for the free surface, based on the so-called finite Volume-of-Fluid (VoF) approach, comprised an incompressible VoF method, an incompressible coupled Level-Set and Volume-of-Fluid (clsVoF) method, and a compressible VoF method. We assessed the capability of these three numerical methods to achieve suitable numerical predictions of sloshing phenomena, specifically, air pockets and bubbles on the free surface inside a test tank. To observe the described sloshing phenomena, we simulated tank motions leading to well defined single impact wave motions. We performed repeated physical tests for validation purposes. Computed velocity and pressure time histories were compared to experimental data we obtained from Particle Image Velocimetry (PIV) and pressure sensor measurement. Grid sensitivity and turbulence model studies were performed. We demonstrated that the compressible VoF method was the most suitable method to obtain accurate predictions of sloshing phenomena. 相似文献
4.
Sloshing, or liquid free surface oscillation, in containers has many important applications in a variety of engineering fields. The modal method can be used to solve linear sloshing problems and is the most efficient reduced order method that has been used during the previous decade. In the present article, the modal method is used to solve a nonlinear sloshing problem. The method is based on a potential flow solution that implements a two-phase analysis on sloshing in a rectangular container. According to this method, the solution to the mass conservation equation, with a nonpenetration condition at the tank walls, results in velocity potential expansion; this is similar to the mode shapes used in modal method. The kinematic and dynamic boundary conditions create a set of two-space-dimensional differential equations with respect to time. The numerical solution of this set of differential equations, in the time domain, predicts the time response of interfacial oscillations. Modal method solutions for the time response of container sloshing due to lateral harmonic oscillations show a good agreement with experimental and numerical results reported in the literature. 相似文献
5.
随着薄膜型LNG运输船的需求量不断增加,晃荡载荷已成为船舶安全性研究的重要内容之一。本文结合中国船级社规范所推荐的公式,对薄膜型LNG船晃荡水平的载荷进行研究,提出载荷计算方法和流程,在MSC.patran的基础上结合二次开发语言PCL,设计了一套晃荡载荷计算与校核系统。该系统对有限元模型进行前后处理,设计了舱室识别算法来搜索晃荡载荷的作用域,实现薄膜型LNG船晃荡载荷的自动计算与施加,完成屈服强度评估。通过算例测试证明本系统自动计算结果的有效性和准确性,可以为工程设计人员大大节约工作量,大幅度提高工作效率。 相似文献
6.
Effects of perforated baffle on reducing sloshing in rectangular tank: Experimental and numerical study 总被引：1，自引：1，他引：0
A liquid sloshing experimental rig driven by a wave-maker is designed and built to study liquid sloshing problems in a rectangular liquid tank with perforated baffle. A series of experiments are conducted in this experimental rig to estimate the free surface fluctuation and pressure distribution by changing external excitation frequency of the shaking table. An in-house CFD code is also used in this study to simulate the liquid sloshing in three-dimensional （3D） rectangular tank with perforated baffle. Good agreements of free surface elevation and pressure between the numerical results and the experimental data are obtained and presented. Spectral analysis of the time history of free surface elevation is conducted by using the fast Fourier transformation. 相似文献
7.
Liquid sloshing is a common phenomenon in the liquid tanks transportation. Liquid waves lead to fluctuating forces on the tank wall. Uncontrolled fluctuations lead to large forces and momentums. Baffles can control these fluctuations. A numerical method, which has been widely used to model this phenomenon, is Smoothed Particle Hydrodynamics(SPH). The Lagrangian nature of this method makes it suitable for simulating free surface flows. In the present study, an accurate Incompressible Smoothed Particle Hydrodynamics(ISPH) method is developed and improved using the kernel gradient correction tensors, particle shifting algorithms, k–ε turbulence model, and free surface particle detectors. Comparisons with the experimental data approve the ability of the present algorithm for simulating shallow water sloshing. The main aim of this study is to investigate the effects of the vertical baffle on the damping of liquid sloshing. Results show that baffles number has a major role in sloshing fluctuation damping. 相似文献
8.
B.-H. Lee J.-C. Park M.-H. Kim S.-J. Jung M.-C. Ryu Y.-S. Kim 《Ocean Engineering》2010,37(2-3):164-173
The violent free-surface motions interacting with structures are investigated using the moving particle semi-implicit (MPS) method, which was originally proposed by Koshizuka and Oka (1996) for incompressible flow simulation. In the present numerical method, a more efficient algorithm for Lagrangian moving particles is used for solving various highly nonlinear free-surface problems without using the Eulerian approach or the grid system. Therefore, the convection terms and time derivatives in the Navier–Stokes equation can be calculated more directly without any numerical diffusion, instabilities, or topological failure. In particular, the MPS method is applied to the simulation of liquid-entry and slamming problems, such as wet-drop (liquid–liquid collision) tests in an LNG tank and slamming loads (solid–liquid collision) on rigid plates with various incident angles. The numerical results are in good agreement with available experimental data. 相似文献
9.
This study considers the coupling effects of ship motion and sloshing. The linear ship motion is solved using an impulse-response-function (IRF) method, while the nonlinear sloshing flow is simulated using a finite-difference method. The IRF method requires the frequency-domain solution prior to conversion to time domain, but the computational effort is much less than that of direct time-domain approaches. The developed scheme is verified by comparing the motion RAOs between the frequency-domain solution and the solution obtained by the IRF method. Furthermore, a soft-spring concept and linear roll damping are implemented to predict more realistic motions of surge, sway, yaw, and roll. For the simulation of sloshing flow in liquid tanks, a physics-based numerical approach adopted by Kim [2001. Numerical simulation of sloshing flows with impact load. Applied Ocean Research 23, 53–62] and Kim et al. [2004. Numerical study on slosh-induced impact pressures on three-dimensional prismatic tanks. Applied Ocean Research 26, 213–226] is applied. In particular, the present method focuses on the simulation of the global motion of sloshing flow, ignoring some local phenomena. The sloshing-induced forces and moments are added to wave-excitation forces and moments, and then the corresponding body motion is obtained. The developed schemes are applied for two problems: the sway motion of a box-type barge with rectangular tanks and the roll motion of a modified S175 hull with rectangular anti-rolling tank. Motion RAOs are compared with existing results, showing fair agreement. It is found that the nonlinearity of sloshing flow is very important in coupling analysis. Due to the nonlinearity of sloshing flow, ship motion shows a strong sensitivity to wave slope. 相似文献
10.
This study investigates the coupling effects of six degrees of freedom in ship motion with fluid oscillation inside a three-dimensional rectangular container using a novel time domain simulation scheme. During the time marching, the tank-sloshing algorithm is coupled with the vessel-motion algorithm so that the influence of tank sloshing on vessel motions and vice versa can be assessed. Several factors influencing the dynamic behavior of tank–liquid system due to moving ship are also investigated. These factors include container parameters, environmental settings such as the significant wave height, current velocity as well as the direction of wind, wave and flow current acting on the ship. The nonlinear sloshing is studied using a finite element model whereas nonlinear ship motion is simulated using a hybrid marine control system. Computed roll response is compared with the existing results, showing fair agreement. Although the two hull forms and the sea states are not identical, the numerical result shows the same trend of the roll motion when the anti-rolling tanks are considered. Thus, the numerical approach presented in this paper is expected to be very useful and realistic in evaluating the coupling effects of nonlinear sloshing and 6-DOF ship motion. 相似文献
11.
A set of canonical problems in sloshing, Part I: Pressure field in forced roll—comparison between experimental results and SPH 总被引：1，自引：0，他引：1
In this article, impact pressure in the case of shallow water sloshing is investigated experimentally and numerically for forced rolling motion. The maximum values of impact pressures have been found for a frequency lower than the first sloshing frequency. Experimental results are compared with numerical ones obtained using smoothed particle hydrodynamics (SPH). The influence of viscosity and of density re-initialization on the SPH results are discussed. A new method for calculating the pressure on walls with SPH is presented. 相似文献
12.
13.
Resonant and near-resonant sway-induced sloshing flow in a rectangular container is used to compare various combinations of compressibility models for air and water. The numerical model is implemented in a commercial RANS computational fluid dynamics (CFD) code. A criterion based on wave propagation is developed to assess the importance of including fluid compressibility. For sloshing flows with low levels of fluid impact, this can be simulated with incompressible fluid models for both air and water. When modelling sloshing at low-filling levels with a travelling wave, which generates large air bubble entrainment, the choice of fluid compressibility model is shown to have a significant influence on pressure magnitude and frequency of oscillation required for structural assessment. Further comparisons with theoretical models show that a full thermal energy compressibility model is also required. 相似文献
14.
A 3D time-independent finite difference method is developed to solve for wave sloshing in a three-dimensional tank excited by coupled surge and sway motions. The 3D equations of fluid motion are derived in a moving coordinate system. The three-dimensional tank, with an arbitrary depth and a square base, is subjected to a range of excitation frequencies with motions that exhibit multiple degrees of freedom. For demonstration purposes the numerical scheme is validated by a benchmark study. Five types of sloshing waves were observed when the tank is excited by various excitation frequencies. A spectral analysis identified the resonant frequencies of each type of wave and the results show a strong correlation between resonant modes and the occurrence of the sloshing wave types. The method can be used to simulate fluid sloshing in a 3D tank with six-degrees of freedom. 相似文献
15.
Internal waves driven by external excitation constitute important phenomena that are often encountered in environmental fluid mechanics. In this study, a pseudospectral σ-transformation model is used to simulate parametric excitation of stratified liquid in a two-layer rectangular tank. The σ-transformation maps the physical domain including the liquid free surface, the interface between the liquid layers, and the bed, onto a pair of fixed rectangular computational domains corresponding to the two layers. The governing equation and boundary conditions are discretised using Chebyshev collocation formulae. The numerical model is verified for two analytical sloshing problems: horizontal excitation of constant density liquid in a rectangular tank, and vertical excitation of stratified liquid in a rectangular tank. A detailed analysis is provided of liquid motions in a shallow water tank due to excitations in the horizontal and the vertical directions. Also, the effect of pycnocline on the wave motions and patterns is studied. It is found that wave regimes and patterns are considerably influenced by the pycnocline, especially when the excitation frequency is large. The present study demonstrates that a pseudospectral σ-transformation is capable to model non-linear sloshing waves in a two-layer rectangular tank. 相似文献
16.
In this paper, a numerical model is established for estimating the wave forces on a submerged horizontal circular cylinder. For predicting the wave motion, a set of two-dimensional Navier-Stokes equations is solved numerically with a finite element method. In order to track the moving non-linear wave surface boundary, the Navier-Stokes equations are discretized in a moving mesh system. After each computational time step, the mesh is modified according to the changed wave surface boundary. In order to stabilize the numerical procedure, a three-step finite element method is applied in the time integration. The water sloshing in a tank and wave propagation over a submerged bar are simulated for the first time to validate the present model. The computational results agree well with the analytical solution and the experimental data.Finally, the model is applied to the simulation of interaction between waves and a submerged horizontal circular cylinder.The effects of the KC number and the cylinder depth on the wave forces are studied. 相似文献
17.
MPS方法数值模拟液舱晃荡问题 总被引：1，自引：0，他引：1
基于无网格粒子法MPS方法(moving particle semi-implicit method)研究了液舱晃荡问题。针对二维矩形液舱晃荡问题进行了数值验证,结果表明MPS方法能够很好地计算晃荡产生的拍击压力。同时将MPS方法应用到带隔板的液舱晃荡问题计算中,分析了二维和三维带隔板液舱晃荡问题。计算结果表明:隔板的存在很大程度地限制了流体的水平运动,隔板附近出现了自由面的翻卷、破碎和融合现象,MPS方法能够很好地模拟这些流动现象。计算得到的波高与实验测得的波高吻合较好,表明MPS方法模拟带隔板的晃荡问题具有一定的可靠性。 相似文献
18.
This paper aims to investigate the effects of the porous baffles on the suppression of sloshing for the tanks with axisymmetric geometries under lateral excitation. Based on the assumptions of inviscid, irrotational, incompressible liquid and small amplitude sloshing, an axisymmetric boundary element method (BEM) for 3D Laplace equation is derived by using the Green's theorem together with the weighted residual method. And a zoning method is employed to model fluid domain in the tanks with complex porous baffles. Meanwhile, the porous baffles are treated motioning together with the tanks, and the velocity across the porous baffle is assumed to be linearly proportional to the pressure gradient between each side of the porous baffle. And the mechanism of suppressing the sloshing response is mainly the energy dissipation of the fluid passing through the porous baffle. Moreover, the linear free surface boundary conditions are also used to solve the governing equations. Compared with other numerical methods, the most prominent advantage of the BEM in solving axisymmetric potential problem is that only the boundaries of half the cross-section instead of the entire problem domain should be discretized, which can cut down large amount of memory and time costs. The present method is verified by comparing the numerical results with the existing literatures, and excellent agreements are obtained. Meanwhile, the proposed models are applied to investigate the effects of the porous baffles on sloshing response in circular cylindrical, annular cylindrical and conical tanks. The effects of the porous baffle length, porous-effect parameter, installation angle and baffle height on the sloshing force, natural frequency and surface elevation are studied. Additionally, some typical sloshing pressure distributions, velocity potential contours and velocity fields are plotted. The results show that swirls at the tips of the baffles can be observed in many cases, and the top-mounted porous baffle makes more significant suppression effects on sloshing response than that of bottom-mounted porous baffle, while increasing the number of ring porous baffles can achieve better restraint effects on sloshing response. And increasing the baffle length of the horizontal wall-mounted ring porous baffle can significantly decrease the sloshing frequencies, as well as the first non-dimensional natural frequency decreases with decrease in porous-effect parameter of the coaxial porous baffle. In addition, remarkable effects on sloshing can be obtained when reasonable designed by selecting the optimal porous-effect parameter, installation angle and baffle height. And this paper can be a useful guide for the seismic design and analysis of many actual liquid storage tanks (such as the Advanced Passive PWR, large water cooling tower, etc.). 相似文献
19.
YAN Chenghua 《中国海洋工程》2001,(2):291-300
A two-dimensional nonlinear sloshing problem is analyzed by means of the fully nonlinear theory and time domain second order theory of water waves. Liquid sloshing in a rectangular container subjected to a horizontal excitation is sim-ulated by the finite element method. Comparisons between the two theories are made based on their numerical results, It is found that good agreement is obtained for the case of small amplitude oscillation and obvious differences occur for large amplitude excitation. Even though, the second order solution can still exhibit typical nonlinear features of nonlinear wave and can be used instead of the fully nonlinear theory. 相似文献
20.
A series of parametric sensitivity studies on unmatched dimensionless scale parameters is carried out on the liquified natural gas (LNG) tank sloshing loads by using a computational fluid dynamics (CFD) program. First, a brief dimensional analysis is conducted to identify the governing and non-matched non-dimensional parameters, assuming that Froude scaling law is adopted. Then the sensitivity of impact pressure is checked through numerical simulations against non-matched parameters, such as fluid viscosity, liquid-gas density ratio, and ullage pressure and compressibility. The CFD simulations are also verified against experimental results. It is concluded that the effects of viscosity and density ratio are insignificant, while the compressibility of ullage space plays an appreciable role, as was pointed out by Bass et al. [Bass, R.L., Bowles, E.B., Trudell, R.W., Navickas, J., Peck, J.C., Yoshimura, N., Endo, S., Pots, B.F.M., 1985. Modeling criteria for scaled LNG sloshing experiments. Transactions of the ASME 107, 272-280]. 相似文献