共查询到19条相似文献，搜索用时 316 毫秒
1.
<正>本文对北斗/GPS多频实时精密定位理论与算法进行了深入研究,重点研究了三频线性组合观测量理论、周跳实时探测与修复方法、三频无几何模糊度解算方法和多系统多频非组合几何模糊度解算模型及其计算优化算法等内容,并对北斗/GPS多频RTK定位性能进行了初步评估。论文的主要贡献概括如下:(1)提出了一种求解特定波长与电离层延迟影响系数条件下噪声最优三频整系数线性组合的解析方法。通过分析得到了3种适合于周跳探测与模糊度解算的特殊三 相似文献
2.
3.
北斗卫星导航系统双差网络RTK方法 总被引：1，自引：1，他引：0
针对北斗卫星导航系统常规实时动态差分(RTK)定位中,整周模糊度的快速解算和流动站位置信息的解算精度问题,该文研究了一种北斗卫星导航系统双频双差网络RTK方法,首先解算参考站网B1、B2载波相位整周模糊度,利用固定的参考站网载波相位整周模糊度计算参考站的观测误差,使用区域误差内插法计算流动站的综合误差影响,改正流动站的观测误差并进行流动站的整周模糊度解算,最后使用实测数据进行算法实验。实验结果表明,该文的方法可以利用北斗卫星导航系统双频观测数据实现网络RTK流动站的厘米级定位。 相似文献
4.
5.
北斗系统短基线解算数据处理方法 总被引：5，自引：1，他引：4
北斗卫星导航系统基线解算和高精度定位中的关键问题是整周模糊度解算。针对北斗系统的相对定位问题,该文利用B1、B2载波相位观测值组成宽巷双差观测值,利用搜索算法固定宽巷双差整周模糊度,建立宽巷及B1、B2的双差观测方程,并利用搜索算法固定B1的整周模糊度,进而固定B2的整周模糊度。以武汉大学PANDA软件处理结果作为参考值处理16km以下的四段基线进行算法的试验检验,结果表明,四段基线在E方向、N方向、U方向的精度分别为1.5cm、2.0cm、5.0cm,验证了利用宽巷组合观测值进行北斗系统基线解算是可行的,其精度和GPS系统相当。 相似文献
6.
7.
长距离网络RTK是实现GPS/BDS高精度实时定位的主要手段之一,其核心是长距离参考站网GPS/BDS整周模糊度的快速准确确定。本文提出了一种长距离GPS/BDS参考站网载波相位整周模糊度解算方法,首先利用GPS双频观测数据计算和确定宽巷整周模糊度,同时利用BDS的B2、B3频率观测值确定超宽巷整周模糊度。然后建立GPS载波相位整周模糊度和大气延迟误差的参数估计模型,附加双差宽巷整周模糊度的约束,解算双差载波相位整周模糊度,并建立参考站网大气延迟误差的空间相关模型。根据B2、B3频率的超宽巷整周模糊度建立包含大气误差参数的载波相位整周模糊度解算模型,利用大气延迟误差空间相关模型约束BDS双差载波相位整周模糊度的解算。克服了传统的使用无电离层组合值解算整周模糊度的不利影响。采用实测长距离CORS网GPS、BDS多频观测数据进行算法验证,试验结果证明该方法可实现长距离参考站网GPS/BDS载波相位整周模糊度的准确固定。 相似文献
8.
基于小波变换的GPS精密单点定位中的周跳探测 总被引：9，自引：0，他引：9
基于双频观测值的Melbourne-Wübbena组合和Geometry-free组合,提出了利用连续小波变换方法来探测GPS相位观测值中的周跳,论述了GPS精密单点定位中的周跳探测和连续小波变换方法探测周跳的算法,说明利用高斯函数的一阶求导小波变换对周跳的多尺度分解的敏感性,能够提高组合观测信号的信噪比,准确定出1周左右的周跳发生位置,从而可以提高利用非差观测值解算周跳和模糊度的效率,并给出具体算例验证了本方法的可行性和有效性。 相似文献
9.
建筑塔机臂尖GNSS动态监测模型设计 总被引：2，自引：1，他引：1
鉴于传统的人工周期巡检方式存在诸多弊端,本文设计了一种基于卫星定位的建筑塔机臂尖动态监测模型。以GPS为例建立单历元快速定位模型,给出利用DUFCOM和DC算法相组合的整周模糊度快速确定算法（FARSE）的实现流程;提出了一种基于历元位置偏差的臂尖垂向位移监测参数及预警参数构造方法。初步试验结果表明,利用GPS单历元快速定位模型解算获得了平面精度优于2 cm、高程精度优于4 cm的定位结果;基于该定位结果,从监测参数和预警参数两个角度验证了本文模型设计的有效性。 相似文献
10.
未来的GNSS系统将广泛使用三个频点的载波信号,极大地推动了利用载波对用户位置和速度等信息进行高精度解算方法的研究。利用载波进行高精度解算的关键是高成功率的确定载波相位整周模糊度。CIR算法基于整数引导估计准则确定载波相位模糊度整数解,算法实现简单,模糊度解算成功率较高,具有很大的实际应用价值。然而目前CIR法在实际应用中主要针对GPS信号体制,在北斗信号体制下是否具有良好的性能还有待验证。本文将CIR法应用于北斗信号体制下三频载波整周模糊度的解算,利用仿真数据对算法进行验证,并将解算结果与GPS信号体制下解算结果进行对比,验证CIR法在北斗信号体制下的可行性,分析不同信号体制下CIR法的解算性能和适用范围。 相似文献
11.
12.
基于GPS基准网的GPS快速静态定位及动态定位方法 总被引：3，自引：0，他引：3
介绍基于GPS基准网进行GSP快速静态定位和动态定位的原理和方法。通过计算基准网改正数及其空间分布，利用内插方法求出用户站的模型误差改正数，不仅可以提高GPS整周模糊度的可靠性，而且能够大大改善GPS测量的精度。利用香港GPS基准网2001年3月的实测数据进行了解算，发现地区在该时间段内受强电离层活动的影响，采用常规GPS测量方法很难确定整周模糊度。利用传统的快速静态定位方法对香港GPS基准网其中一条边（9.2km）24h的观测数据按每15min计算，模糊度确定的准确率仅为45％。采用基准网内插改正数后，仅利用L1的观测数据模糊度确定的准确率提高到100％。点位精度平面位置由2cm提高到5mm，高程精度由4cm提高到3cm。 相似文献
13.
针对在城市峡谷环境下观测卫星较少、观测质量差和周跳频繁,导致动对动定位过程中双差模糊度不连续的问题,提出了一种GPS/BDS组合系统的单历元模糊度解算方法。通过GPS/BDS组合定位提高了卫星的可用数量,利用单历元模糊度固定减弱了周跳频繁带来的影响。实验采用GPS/BDS组合的7组数据,分析了在不同高度角下动对动定位单历元解的模糊度固定率、解算失败率、粗差率和定位精度。结果表明,GPS/BDS组合动对动定位单历元模糊度解算方法,在高遮挡的城市峡谷环境仍然可以取得较好的定位结果。 相似文献
14.
15.
在对GPS／GLONASS组合定位的周跳探测和修复方法进行深入研究的基础上，论述了适合于两种数据联合解算的GPS／GLONASS模糊度迭代处理方法及相应的基于FARA方法的整周模糊度固定方法。在现有BERNESE Ver4.0GSP数据处理软件的基础上，增加及改进了其中的若干模块，从而研制出组合定位系统高精度数据处理软件，并进行了试验计算。结果表明，所开发的组合定位系统数据处理软件内、外符合精度均达到mm级，证明了这种高精度相对定位理论、方法、软件的正确性和可行性。 相似文献
16.
Reliable single-epoch ambiguity resolution for short baselines using combined GPS/BeiDou system 总被引：2，自引：1，他引：1
GNSS single-epoch real-time kinematic (RTK) positioning depends on correct ambiguity resolution. If the number of observed satellites in a single epoch is insufficient, which often happens with a standalone GNSS system, the ambiguity resolution is difficult to achieve. China’s BeiDou Navigation Satellite System has been providing continuous passive positioning, navigation and timing services since December 27, 2012, covering China and the surrounding area. This new system will increase the number of satellites in view and will have a significant effect on successful ambiguity resolution. Since the BeiDou system is similar to GPS, the procedure of data processing is easier than that for the Russian GLONASS system. We briefly introduce the time and the coordinate system of BeiDou and also the BeiDou satellite visibility in China, followed by the discussion on the combined GPS/BeiDou single-epoch algorithm. Experiments were conducted and are presented here, in which the GPS/BeiDou dual-frequency static data were collected in Wuhan with the baseline distance varying from 5 to 13 km, and processed in separate and combined modes. The results indicate that, compared to a standalone GPS or BeiDou system, the combined GNSS system can increase the successful ambiguity fixing rate for single epochs and can also improve the precision of short baselines determination. 相似文献
17.
This paper presents a new strategy for GPS carrier phase data processing. The classic approach generally consists of three steps: a float solution, a search for integer ambiguities, and a fixed solution. The new approach is based on certain properties of ambiguity function method and ensures the condition of integer ambiguities without the necessity of the additional step of the integer search. The ambiguities are not computed explicitly, although the condition of “integerness” of the ambiguities is ensured in the results through the least squares adjustment with condition equations in the functional model. An appropriate function for the condition equations is proposed and presented. The presented methodology, modified ambiguity function approach, currently uses a cascade adjustment with successive linear combinations of L1 and L2 carrier phase observations to ensure a correct solution. This paper presents the new methodology and compares it to the three-stage classic approach which includes ambiguity search. A numerical example is provided for 25 km baseline surveyed with dual-frequency receivers. All tests were performed using an in-house developed GINPOS software and it has been shown that the positioning results from both approaches are equivalent. It has also been proved that the new approach is robust to adverse effects of cycle slips. In our opinion, the proposed approach may be successfully used for carrier phase GPS data processing in geodetic applications. 相似文献
18.
19.
Ambiguity resolution for triple-frequency geometry-free and ionosphere-free combination tested with real data 总被引：5，自引：3，他引：2
The recent GPS Block IIF satellites SVN62 and SVN63 and the Galileo satellites GIOVE-A, GIOVE-B, PFM and FM2 already send signals on more than two frequencies, and more GNSS satellites will provide tracking data on at least three frequencies in the near future. In this paper, a simplified general method for ambiguity resolution minimizing the noise level for the triple-frequency geometry-free (GF) and ionosphere-free (IF) linear combinations is presented, where differently scaled code noise on the three frequencies was introduced. For the third of three required linear combinations, the most demanding one in triple-frequency ambiguity resolution, we developed a general method using the ambiguity-corrected phase observations without any constraints to search for the optimal GF and IF linear combination. We analytically demonstrate that the noise level of this third linear combination only depends on the three frequencies. The investigation concerning this frequency-dependent noise factor was performed for GPS, Galileo and Compass frequency triplets. We verified the theoretical derivations with real triple-frequency GPS and Galileo data from the Multi-GNSS Experiment (M–GEX) of the International GNSS Service (IGS). The data of about 30 M–GEX stations around the world over 11 days from 29 April 2012 to 9 May 2012 were used for the test. For the third linear combinaton using Galileo E1, E5b and E5a, which is expected to have the worst performance among all the GNSS frequency triplets in our investigation, the formal errors of the estimated ambiguities are in most cases below 0.2 cycles after 400 observation epochs. If more GPS satellites sending signals on three frequencies or more stations tracking Galileo E6 signal are available in the future, an improvement by a factor of two to three can be expected. 相似文献