首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 250 毫秒
1.
Analysis of till micromorphology represents a relatively new technique that has been used most frequently to infer the importance of subglacial shear in till genesis. This study aims to calibrate the technique by comparing Pleistocene tills from United Kingdom with a modern till (the UpB till) from beneath Ice Stream B, West Antarctica. Despite the fact that all of the tills examined have been interpreted as deforming‐bed deposits, the modern till has significantly less abundant and diverse microstructures than those found in the Pleistocene tills. Seventeen examined thin‐sections of the UpB till contain recognisable microstructures over only 0–30% of individual thin‐section area. The most common microstructures are: (i) birefringent clay patterns that are interpreted as shear zones and (ii) adherent matrix structures, which we interpret as uncomminuted remnants of the parent glacial/glaciomarine diamictons. Fourteen thin‐sections of the Pleistocene tills were covered by microstructures in 10–95% of their area. The Pleistocene microstructures include birefringent clays and adherent matrix structures, as in the UpB till, but also laminations and deformed pods made of chalk and sorted sediments. We conclude that the same till‐forming process, i.e. subglacial deformation, may result in distinctly different till micromorphology. This is a consequence of the fact that microstructural characteristics are strongly influenced by factors other than shear deformation. We identify three controls that may be important for forming contrasting microstructural assemblages: (i) strain magnitude, (ii) the degree of heterogeneity of parent material, and (iii) relative importance of sediment sorting by flowing water in the subglacial environment. Thus till micromorphology is sensitive to multiple factors, which with proper calibration may enhance the existing capability to interpret past subglacial conditions from microstructures. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

2.
This paper presents the first integrated macroscale and microscale examination of subglacial till associated with the last‐glacial (Fraser Glaciation) Cordilleran Ice Sheet (CIS). A new statistical approach to quantifying till micromorphology (multivariate hierarchical cluster analysis for compositional data) is also described and implemented. Till macrostructures, macrofabrics and microstructures support previous assertions that primary till in this region formed through a combination of lodgement and deformation processes in a temperate subglacial environment. Macroscale observations suggest that subglacial environments below the CIS were probably influenced by topography, whereby poor drainage of the substrate in topographically constricted areas, or on slopes adverse to the ice‐flow direction at glacial maximum, facilitated ductile deformation of the glacier bed. Microscale observations suggest that subglacial till below the CIS experienced both ductile and brittle deformation, including grain rotation and squeeze flow of sediment between grains under moist conditions, and microshearing, grain stacking and grain fracturing under well‐drained conditions. Macroscale observations suggest that ductile deformation events were probably followed by brittle deformation events as the substrate subsequently drained. The prevalence of ductile‐type microstructures in most till exposures investigated in this study suggests that ductile deformation signatures can be preserved at the microscale after brittle deformation events that result in larger‐scale fractures and shear structures. It is likely that microscale ductile deformation can also occur within distributed shear zones during lodgement processes. Cluster analysis of microstructure data and qualitative observations made from thin sections suggest that the relative frequency of countable microstructures in this till is influenced by topography in relation to ice‐flow direction (bed drainage conditions) as well as by the frequency and distribution of voids in the till matrix and skeletal grain shapes.  相似文献   

3.
This study of tills from the Eastern Alps, Austria, illustrates the insights obtained using microsedimentology on subglacial tills in the context of palaeogeographical reconstructions of glacier advances. Investigations of several sites with tills derived from both local glaciers and the ice‐sheet streaming of the Inn Glacier during the Last Glacial Maximum and its termination reveal a detailed picture of subglacial sedimentology that provides evidence of soft sediment subglacial deformation under polythermal conditions. All the tills exhibit microstructures that are proxy evidence of significant changes in till rheology. The tills originate from multiple sources, incorporating older tills and other deposits picked up by the subglacial deformation within a polythermal but dominantly warm temperate subglacial thermal regime. The analyses of till microstructures reveal a direct relationship between basal ice strain conditions and their development. A hypothesis is derived, from the various microstructures observed in these Austrian tills formed under soft sediment deforming basal ice conditions, that suggests that with basal thermal changes and fluctuations in clay content, pore‐water content and pressure, microstructures form in a non‐random manner. It is postulated that in clay‐deficient sediments, edge‐to‐edge events are most likely to occur first; and where clay content increases, grain stacks, rotation structures, deformation bands and, finally, shear zones are likely to evolve in an approximate sequential manner. After repeated transport, emplacement, reworking and, probably, further shearing and deformation events, an emplaced ‘till’, as observed in these Austrian tills, will form that carries most, if not all of these microstructures, in varying percentages. Finally, the impact of the Inn Glacier Ice Stream on these tills is not easily detected and/or differentiated, but indications of high pore water and probable dilatant events leading to reductions in the number of edge‐to‐edge events point to the impact of fast or thick ice upon these subglacial tills.  相似文献   

4.
Sediment from the Attawapiskat area near James Bay, Northern Ontario was sampled for micromorphological analyses. The sediment is a glacial diamicton (till) of subglacial origin. The till contains entrained and scavenged sediments of proglacial and/or subglacial glaciofluvial/glaciolacustrine origin from a subglacial deforming layer that was emplaced due to both stress reduction and/or porewater dissipation. Evidence of porewater escape, clay translocation and other microstructures all point to emplacement under active subglacial bed deformation. The limited number of edge to edge (ee) grain crushing events, however, point to lower stress levels than might anticipated under a thin fast ice lobe of the James Bay during the Middle Pliocene. Microstructures of Pleistocene tills were quantitatively compared with the Attawapiskat till and the limited number of ee events at Attawapiskat further highlighted that grain to grain contact was curtailed possibly due to high till porosity, high porewater pressures and low strain rates or alternatively due to a high clay matrix component reducing grain crushing contact events. It is suggested that this Middle Pliocene till may be indicative of sediments emplaced under ice lobe surging conditions or fast ice stream subglacial environments. This proposal has significant implications for the glaciodynamics of this part of the Middle Pliocene James Bay lobe. This research highlights a crucial link between subglacial conditions, till microstructural analyses and glaciodynamics.  相似文献   

5.
Microstructural analyses were used to investigate the formation of a macroscale‐massive till at Knud Strand in Denmark. More than 100 thin sections were examined and microstructures mapped and counted for quantitative comparison and interpretation. Microstructures indicative of both brittle (grain lineations, edge‐to‐edge crushed grains) and ductile (turbate structures) deformation are evenly distributed in vertical profiles through the till, suggesting that strain contributed to its formation. Discrete shears (grain lineations and plasmic fabric) probably accommodated most deformation, whereas rotational deformation was less prominent. The microshear geometry fits the predicted Coulomb–Mohr failure criterion, indicating that till behaves as a plastic material. Strain estimate of ca. 101 from micromorphological proxies is two–three orders of magnitude lower than expected if the till was subjected to pervasive deformation. A hybrid of lodgement and time‐transgressive deformation is envisaged as the till‐forming processes. Our data suggest that even abundant evidence of microscale deformation at continuing high levels of strain may only record the latest process of deposition and deformation and therefore not fully reflect the complexity of till genesis. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

6.
Subglacial deformation is crucial to reconstructing glacier dynamics. Sediments associated with the Late Ordovician ice sheet in the Djado Basin, Niger, exhibit detailed structures of the subglacial shear zone. Three main types of subglacial shear zones (SSZ) are discriminated. The lowermost SSZ, developed on sandstones, displays Riedel macrostructures and cataclastic microstructures. These resulted from brittle deformation associated with strong glacier/bed coupling and low pore-water pressure. Where they developed on a clay-rich bed, the overlying SSZ display S–C to S–C′ fabrics, sheath folds, and dewatering structures. These features indicate high ductile shear strain and water overpressure. On fine-grained sand beds, the SSZ exhibit homogenized sand units with sand stringers, interpreted as fluidized sliding beds. The succession of subglacial deformation processes depends on fluid-pressure behavior in relation to subglacial sediment permeability. Fluid overpressure allows subglacial sediment shear strength and ice/bed coupling to be lowered, leading to ice streaming.  相似文献   

7.
Menzies, J. & Ellwanger, D. 2010: Insights into subglacial processes inferred from the micromorphological analyses of complex diamicton stratigraphy near Illmensee‐Lichtenegg, Höchsten, Germany. Boreas, 10.1111/j.1502‐3885.2010.00194.x. ISSN 0300‐9483. Investigations of a 30‐m‐high section of Pleistocene sediments at Illmensee‐Lichtenegg, Höchsten in Baden‐Württemberg provide detailed information on subglacial conditions beneath the Rhine Glacier outlet of the Alpine ice sheet in southern Germany. The sediment exposure extends from an upper cemented sand and gravel (Deckenschotter) into diamictic units that extend down to weathered Molasse bedrock. The exposure reveals sediments symptomatic of active syndepositional stress/strain processes ongoing beneath the ice sheet. Macrosedimentology reveals diamicton subfacies units and a strong uni‐direction of ice motion based on clast fabric analyses. At the microscale level, thin‐section analyses provide a substantially clearer picture of the dynamics of subglacial sediment deformation and till emplacement. Evidence based on detailed micromorphological analyses reveals microstructural strain and depositional markers that indicate a subglacial environment of ongoing soft bed deformation in which the diamictons can be readily identified as subglacial tills. Within this subglacial environment, distinct changes in pore‐water pressure and sediment rheology can be detected. These changes reveal fluctuating conditions of progressive, non‐pervasive deformation associated with rapid changes in effective stress and shear strain leading to till emplacement. This site, through the application of micromorphology, increases our understanding of localized subglacial conditions and till formation.  相似文献   

8.
  相似文献   

9.
《Quaternary Science Reviews》2007,26(19-21):2354-2374
The glacial sediments of north Norfolk are a type site for subglacial deforming bed sediments. This investigation focussed on subglacial shear zone process at the field and thin section scale, in order to understand subglacial processes, as well as considering the implications for regional stratigraphies. The sandy and chalky tills from three sites (within 1 km) at Weybourne, Norfolk, showed evidence for subglacial deformation associated with simple shear, producing extension, compression and rotation. It was demonstrated how these processes interacted to cause chalk fragmentation and predictable fabric strengths (dependant on sorting and grain size). It is suggested that the ‘Marly Drift’ is a diachronous unit, and the resultant stratigraphy at Weybourne reflects one deformation till, resulting from a series of ice advances, but with a lithology derived from the local chalk bed rock (with some far travelled erratics), which have undergone different degrees of chalk fragmentation reflecting the nature and duration of the subglacial deformation.  相似文献   

10.
In this paper, we examine whether till grain size affects the range and occurrence of micromorphological features associated with subglacial shear. Our till samples were collected from two glaciers in Iceland, and varied in texture from a coarse, sandy clast-rich till (Fjallsjökull) to a fine-grained silty-sandy till (Vestari-Hagafellsjökull). We found a wide range of deformational microstructures that included skelsepic plasmic fabric, intraclasts of pre-existing eroded bedrock (basalt) and weathered clay and ‘mini-shear zones’ between clasts. We classified our micromorphological data into three classes; rotational, intermediate and linear. In addition to these observations, we performed extensive microfabric analysis at different scales on all of our samples. We found that the coarse-grained till contained a greater number and variety of microstructures than the fine-grained till. In addition, the fine-grained till showed a distinct lack of rotational structures that we attribute to the lack of significantly sized clasts in the matrix. We argue that the varied texture of the coarse-grained till provides a greater degree of perturbation within the shearing layer and so more distinct microstructures form. In a more fine-grained till, shearing is more homogeneous since there are less perturbations in the matrix and this leads to a more singular kind of microstructure. Our observations suggest that subglacial shear occurs within a multi-layered patchwork of different grain sizes, competence and pore water pressures. It is these factors that are so crucial in determining the occurrence and type of microstructural evidence we see in subglacial tills.  相似文献   

11.
Deciphering the relationships between streamlined subglacial landforms and deposits therein helps to constrain the dynamics of past ice sheets. Here we present microstructural analyses of till from the largest drumlin field in the North European Lowland generated by a major palaeo-ice stream of the Scandinavian Ice Sheet. Data derived from thin sections and X-ray microtomography (μCT) reveal multiple microstructures including microshears, circular structures, grain stacks and crushed grains. Long axes of micro-clasts measured in thin sections are directionally clustered and have low, down-ice-oriented dip angles. Some samples reveal subordinate clustering oriented at high angles to the main direction. The μCT data show low clustering strengths of clasts and no systematic fabric pattern in the entire set of samples. There is no correspondence between the clast orientations and the directions of drumlin long axes, suggesting that the till is antecedent in relation to the drumlin-shaping process. The observations indicate spatially and temporally variable, shallow-seated brittle and ductile deformation controlled by porewater pressure fluctuations and generated time-transgressively parallel to till accretion. Consistently with previous studies, the data suggest that the Stargard drumlins are erosional remnants of a pre-existing terrain shaped by material removal from the inter-drumlin areas.  相似文献   

12.
JANE K. HART 《Sedimentology》2006,53(1):125-146
The subglacial processes at Briksdalsbreen, Norway, are examined by a combination of sedimentology, thin section and scanning electron microscope (SEM) analysis of till samples from an exposed subglacial surface and from beneath the glacier. Studies of a fluted surface indicate that subglacial deformation is occurring on a field scale with flutes forming behind most clasts 0·6 m high. At the thin section scale (0·014–2·0 mm) it is seen that deformation is by rotation and attenuation and is dependent on till texture. At the SEM scale (0·1–0·4 mm) it is seen that erosion is controlled by abrasion and percussion which produces distinct grain ‘styles’ as part of an erosional continuum. Overall it is shown that rotation and attenuation is a dominant process at all scales and that the clast interactions associated with different scale perturbations within the shear zone control erosion and deposition, as well as landform and fabric production.  相似文献   

13.
冰岩界面的冰川动力学是冰川系统的重要组成部分, 海螺沟冰川地处温暖湿润的海洋环境, 冰川运动速度较快, 冰川底部接近压融点, 是研究冰下过程的较理想地点. 在海螺沟冰川大型磨光面上浅显侵蚀坑内发现了碎屑物质. 对碎屑物质理化特征研究表明: 粒度特征、地球化学与石英砂SEM 分析表明沉积在冰岩界面上的物质来自于冰川底部的底碛层, 而不是冰上环境的产物. 偏光显微镜下观察到的冰下沉积物呈现出一系列塑性变形(微旋转、褶皱)和脆性变形(线性结构、支撑结构、断层)微观结构和构造. 两种变形结构的存在是碎屑物质在形成过程中其含水量波动情况的反映. 冰下碎屑物质是冰下融出、滞碛作用的共同产物. 在整个冰下碎屑物质形成与变形过程中, 由于冰下水系季节性变化带来的冰岩界面上冰川融水含量的波动起了决定性作用.  相似文献   

14.
A two‐part basal till at Knud Strand, Denmark reveals a uniform fabric pattern and strength, petrographical composition and clay mineralogy. The nature of the contact with the underlying sediments, ductile deformation structures, partly intact soft sediment clasts, small meltwater channels and thin horizontal outwash stringers dispersed in the till indicate both bed deformation and basal decoupling by pressurised subglacial water. A time‐transgressive model is suggested to explain the lack of vertical gradation in till properties in which debris released from the active ice sole is sheared in a thin zone moving upward as till accretion proceeds. It is suggested that, although strain indicators occur throughout the entire till thickness, the deformation at any point of time encompassed the uppermost part of the till only, allowing preservation of fragile clasts below. The substantial thickness of the till (up to 6 m) coupled with a much smaller (by more than one order of magnitude) inferred thickness of the deforming bed suggests that the bulk of till material was transported englacially prior to deposition. The lack of petrographical gradation in the till is attributed to effective mixing and homogenisation of material along the ice flow path. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

15.
王学滨  马剑  刘杰  潘一山 《岩土力学》2004,25(6):904-908
研究了岩样在单轴压缩条件下轴向应力．侧向或环向变形的全程曲线特征。基于考虑峰值剪切强度后微小结构之间相互影响和作用的梯度塑性理论，得到了由于剪切局部化而引起的侧向塑性变形。利用虎克定律描述了试件的弹性变形，得到了轴向应力．侧向变形全程曲线的解析解。在软化阶段，试件中部侧向变形及对靠近试件上端或下端部位的侧向变形并不相同。与轴向应力．应变曲线可能出现的回跳现象类似。试件中部轴向应力．侧向应变曲线也可能出现回跳现象。在应变软化阶段，与应力．侧向应变曲线相比，应力．环向应变曲线不容易发生回跳现象。若在试件内部出现多条剪切带，则应该以等效剪切带宽度替代本文中的剪切带宽度。随着剪切带倾角、内部长度参数的降低、剪切模量的增加及弹性模量的降低，轴向应力．侧向应变曲线越陡；甚至能出现弹性回跳。  相似文献   

16.
Oil sands are dense granular materials with interlocked structure and clay shales are heavily overconsolidated clays. They are classified as structured soil or weak rock, exhibiting high peak strength with severe softening and dilation, particularly at low confining stress. The triaxial compression test results indicate that both materials yield linear Mohr–Coulomb envelopes with an apparent cohesion for peak and residual strengths. However, the strength components mobilized from these two materials are very different. This paper investigates if these strength parameters are intrinsic properties or responses derived in triaxial compression conditions. Computer tomography scanning technique is used to aid in examining the micro‐structural features of the sheared specimens such as shear banding pattern, shear band thickness, spatial porosity distributions inside and outside shear bands. These micro‐structural features are used to explain the macro‐deformation response observed in the triaxial compression tests. Mobilization of strength components derived from interlocked structure, cementation, dilation, rolling and critical state are analysed for pre‐, post‐peak softening and residual stages. It is found that the empirical correlation such as Mohr–Coulomb failure criterion based on triaxial compression test results does not necessarily reflect the intrinsic properties of the test materials. Testing conditions are embedded in the empirical correlation. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

17.
The general subject of this paper is subglacial deformation beneath Breiðamerkurjökull, a surging Icelandic glacier. More specifically it discusses the evolution and the role of fluid pressure on the behaviour of subglacial sediments during deformation. During Little Ice Age maximum, the two outcrops studied, North Jökulsarlon (N-Jk) and Brennhola-Alda (BA), were located at 2550 m and 550 m respectively from the front of the Breiðamerkurjökull. Sedimentological analysis at the forefield of the glacier shows thick, coarse glaciofluvial deposits interbedded with thin, fine-grained shallow lacustrine/swamp deposits, overlain by a deformed till unit at N-Jk. BA outcrop shows fine-grained shallow lacustrine/swamp deposits overlain by a deformed till unit. The sequence of deformation events from one outcrop to the other is similar. First, major thrust planes, which were rooted in shallow lacustrine/swamp deposits developed by glacially induced simple shear. Next, the thrusts were folded, indicating the deformation of hydroplastic sediment assisted by moderate fluid pressure. Then clastic dyke swarms crosscut the sedimentary succession, proving that fluid overpressure caused hydrofracturing associated with fluidisation. Finally, as water escaped from the glacier bed, fluid pressure dropped, and normal faulting occurred in brittle-state subglacial sediments. Fluid-pressure variations are related to glacier dynamics. They control the deformation sequence by modifying subglacial rheological behaviour and the nature of the subglacial tectonism.  相似文献   

18.
A pit located near Ballyhorsey, 28 km south of Dublin (eastern Ireland), displays subglacially deposited glaciofluvial sediments passing upwards into proglacial subaqueous ice‐contact fan deposits. The coexistence of these two different depositional environments at the same location will help with differentiation between two very similar and easily confused glacial lithofacies. The lowermost sediments show aggrading subglacial deposits indicating a constrained accommodation space, mainly controlled by the position of an overlying ice roof during ice‐bed decoupling. These sediments are characterized by vertically stacked tills with large lenses of tabular to channelized sorted sediments. The sorted sediments consist of fine‐grained laminated facies, cross‐laminated sand and channelized gravels, and are interpreted as subglaciofluvial sediments deposited within a subglacial de‐coupled space. The subglaciofluvial sequence is characterized by glaciotectonic deformation structures within discrete beds, triggered by fluid overpressure and shear stress during episodes of ice/bed recoupling (clastic dykes and folds). The upper deposits correspond to the deposition of successive hyperpycnal flows in a proximal proglacial lake, forming a thick sedimentary wedge erosively overlying the subglacial deposits. Gravel facies and large‐scale trough bedding sand are observed within this proximal wedge, while normally graded sand beds with developed bedforms are observed further downflow. The building of the prograding ice‐contact subaqueous fan implies an unrestricted accommodation space and is associated with deformation structures related to gravity destabilization during fan spreading (normal faults). This study facilitates the recognition of subglacial/submarginal depositional environments formed, in part, during localized ice/bed coupling episodes in the sedimentary record. The sedimentary sequence exposed in Ballyhorsey permits characterization of the temporal framework of meltwater production during deglaciation, the impact on the subglacial drainage system and the consequences on the Irish Sea Ice Stream flow mechanisms.  相似文献   

19.
开展了不同剪应力水平下土体剪切位移的时间效应特征分析,提出了随剪应力水平增加,土体变形状态对应呈现快速稳定、缓慢稳定、缓慢破坏和快速破坏4种演化类别。通过粉质黏土蠕变直剪试验,对不同压实度下与剪应力水平相对应的土体剪切位移时间效应的4种状态类别进行了研究。采用幂函数拟合剪切位移时间历程试验数据,将幂次值作为划分变形状态类别的理论判据,基于幂次值与剪应力水平对应关系的曲线形态特征,得到了土体4种变形状态对应的3个剪应力水平阈值,提出了基于Coulomb强度公式表达的相应变形状态强度参数及其与极限状态强度参数的关系式。针对高速铁路无砟轨道路基工后沉降控制须满足毫米级变形的特殊要求,明确了应将土体变形时间效应控制于快速稳定状态作为路堤填料选择及压实标准的设计原则和技术条件。所得成果对构建高速铁路路基土工结构变形状态控制设计技术提供了理论和试验依据。  相似文献   

20.
The microstructures of cm-scale displacement faults offsetting unlithified sequences of finely interbedded sands, silts and clays from outcrops in Denmark have been examined. A variety of shear band types are recognised based on their grain-scale deformation mechanism and internal structure. Shear bands in a Jurassic sequence exposed along the coastline of Bornholm are characterised by intense cataclasis of both sand and clay layers. This deformation mechanism is accompanied by extensive grain scale mixing along discrete shear bands to give a fault rock composition that reflects the relative amount of sand and clay within the faulted sequence. In contrast, shear bands at Nr. Lyngby and Jensgaard, both on the Jutland coast, are characterised by granular flow within the sand units. Grain scale mixing is subdued at these locations so that layers maintain their integrity across the shear band to form a layered internal structure of sand, silt and clay smears. In some instances, particularly at Nr. Lyngby, clays have deformed in a brittle manner so that they do not contribute material to the shear band, which is then comprised exclusively of coarser-grained components. The different deformation mechanisms and internal structures of shear bands are thought to be controlled by burial depth at the time of faulting.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号