共查询到20条相似文献，搜索用时 31 毫秒
1.
Design recommendations for steel plate shear wall (SPSW) systems have recently been introduced into seismic provisions for steel buildings. Response modification (R), overstrength (Ωo), and displacement amplification (Cd) factors for SPSW systems presented in design codes were based on professional experience and judgment. A numerical study has been undertaken to evaluate these factors for SPSW systems. Forty‐four unstiffened SPSW possessing different geometrical characteristics were designed based on the recommendations given in the AISC Seismic Provisions. Bay width, number of stories, story mass, and steel plate thickness were considered as the prime variables that influence the response. Twenty records were selected to include the variability in ground motion characteristics. In order to provide a detailed analysis of the post‐buckling response, three‐dimensional finite element analyses were conducted for the 44 structures subjected to the selected suite of earthquake records. For each structure and earthquake record, two analyses were conducted in which the first includes geometrical nonlinearities and the other includes both geometrical and material nonlinearities, resulting in a total of 1760 time history analyses. In this paper, the details of the design and analysis methodology are given. Based on the analysis results, response modification (R), overstrength (Ωo), and displacement amplification (Cd) factors for SPSW systems are evaluated. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
2.
Ho Choi Yasushi Sanada Hisatoshi Kashiwa Yasuhiro Watanabe Jafril Tanjung Huanjun Jiang 《地震工程与结构动力学》2016,45(6):999-1018
This study proposes a procedure for identifying spectral response curves for earthquake‐damaged areas in developing countries without seismic records. An earthquake‐damaged reinforced concrete building located in Padang, Indonesia was selected to illustrate the identification of the maximum seismic response during the 2009 West Sumatra earthquake. This paper summarizes the damage incurred by the building; the majority of the damage was observed in the third story in the span direction. The damage was quantitatively evaluated using the damage index R according to the Japanese guidelines for post‐earthquake damage evaluation. The damage index was also applied to the proposed spectral response identification method. The seismic performance of the building was evaluated by a nonlinear static analysis. The analytical results reproduced a drift concentration in the third story. The R‐index decreased with an increase in the story drift, which provided an estimation of the maximum response of the building during the earthquake. The estimation was verified via an earthquake response analysis of the building using ground acceleration data, which were simulated based on acceleration records of engineering bedrock that considered site amplification. The maximum response estimated by the R‐index was consistent with the maximum response obtained from the earthquake response analysis. Therefore, the proposed method enables the construction of spectral response curves by integrating the identification results for the maximum responses in a number of earthquake‐damaged buildings despite a lack of seismic records. Copyright © 2016 The Authors. Earthquake Engineering & Structural Dynamics published by John Wiley & Sons Ltd. 相似文献
3.
《地震工程与结构动力学》2018,47(5):1250-1269
Reinforced concrete waffle‐flat plate (WFP) structures present 2 important drawbacks for use as a main seismic resisting system: low lateral stiffness and limited ductility. Yet the former can serve a positive purpose when, in parallel, the flexible WFP structure is combined with a stiff system lending high‐energy dissipation capacity, to form a “flexible‐stiff mixed structure.” This paper experimentally investigates the seismic performance of WFP structures (flexible system) equipped with hysteretic dampers (stiff system) through shake‐table tests conducted on a 2/5‐scale test specimen. The WFP structure was designed only for gravitational loads. The lateral strength and stiffness provided by the dampers at each story were, respectively, about 3 and 7 times greater than those of the bare WFP structure. The mixed system was subjected to a sequence of seismic simulations representing frequent to very rare ground motions. Under the seismic simulations associated with earthquakes having return periods ranging from 93 to 1894 years, the WFP structure performed in the level of “immediate occupancy,” with maximum interstory drifts up to about 1%. The dampers dissipated most (75%) of the energy input by the earthquake. 相似文献
4.
Rafael Riddell 《地震工程与结构动力学》1995,24(11):1491-1510
This paper is concerned with the effect of soil conditions on the response of single-degree-of-freedom inelastic systems subjected to earthquake motions. The ground motions considered are 72 horizontal components of motion, most of them recorded during the 3 March, 1985 Chile earthquake (Ms = 7·8) and two main aftershocks; among these records are some of the strongest and longer duration earthquake motions ever recorded. The recording station sites were classified in one of three soil types, which can be generically referred to as rock, firm ground, and medium stiffness soil. Response results for each group were analysed statistically to obtain factors for deriving inelastic design spectra of the Newmark-Hall type, as well as alternative simplified spectral shapes suitable for code formulation. Particular attention was given to the response modification factors (R) that are commonly used in seismic codes to reduce the ordinates of the elastic spectrum to account for the energy dissipation capacity of the structure. The response modification factors, known to be function of both the natural period of vibration and the ductility factor, are found to be dependent on soil conditions, particularly in the case of medium stiffness soils. It is also shown that the indirect procedure of applying R to the elastic design spectrum is less accurate than directly using functions that represent the inelastic design spectrum. 相似文献
5.
The bidirectional response of a portion of a reinforced concrete (RC) waffle-flat plate (WFP) structure subjected to far-field ground motions is studied through shake table tests. The test specimen is a scaled portion of a prototype structure designed under current building codes and located in a region of moderate seismicity of the Mediterranean area. The specimen was subjected to a sequence of tests of increasing acceleration amplitude that respectively represented very frequent, frequent, design, and very rare earthquakes at the site. The test structure performed well (basically in the elastic domain) under very frequent and frequent earthquakes, approached the boundary between the performance levels of life safety and near collapse under the design earthquake, and collapsed under the very rare earthquake. Damage concentrated at column bases and at the transverse beams of the exterior plate-to-column connection. Columns dissipated about 10% of the total energy that contributes to damage, and the rest was dissipated by the exterior plate-column connection. The total energy input on the structure until collapse under the bidirectional seismic action was very close to the value obtained in previous studies on a similar specimen tested under unidirectional ground motions. The capacity curve estimated from the experimental base shear vs top displacement relationship suggests it is best to use a behavior factor of at most q = 2 when designing WFP structures with the reduced-spectrum force-based approach. 相似文献
6.
Evaluation of seismic displacement demands from the September 19, 2017 Puebla‐Morelos (Mw = 7.1) earthquake in Mexico City 
下载免费PDF全文
下载免费PDF全文 This short communication presents the assessment of seismic inelastic and elastic displacement demands computed from earthquake ground motions (EQGMs) recorded in Mexico City during the intermediate‐depth intraslab Puebla‐Morelos earthquake on 19 September 2017 (Mw = 7.1). Evaluation is conducted by means of peak elastic and inelastic displacement demand spectra, inelastic displacement ratio, CR, spectra, and generalized interstory drift spectra computed for selected recording stations located in different soil sites of Mexico City, including those located in areas of reported collapsed buildings. Results of this study confirm previous observations made from interplate (subduction) EQGMs that peak inelastic displacement demands are greater than corresponding elastic counterparts for short‐to‐medium period structures, while the opposite is true for medium‐to‐long period structures. Possible basin site effects were identified from generalized interstory drift spectra. It is also shown that an equation introduced in the literature to obtain estimates of CR developed from interplate EQGMs provides also a good estimate for mean CR computed from the intermediate‐depth intraslab EQGMs. 相似文献
7.
Previous studies have suggested that rocking vibration accompanied by uplift motion might reduce the seismic damage to buildings subjected to severe earthquake motions. This paper reports on the use of shaking table tests and numerical analyses to evaluate and compare the seismic response of base‐plate‐yielding rocking systems with columns allowed to uplift with that of fixed‐base systems. The study is performed using half‐scale three‐storey, 1 × 2 bay braced steel frames with a total height of 5.3 m. Base plates that yield due to column tension were installed at the base of each column. Two types of base plates with different thicknesses are investigated. The earthquake ground motion used for the tests and analyses is the record of the 1940 El Centro NS component with the time scale shortened by a factor of 1/√2. The maximum input acceleration is scaled to examine the structural response at various earthquake intensities. The column base shears in the rocking frames with column uplift are reduced by up to 52% as compared to the fixed‐base frames. Conversely, the maximum roof displacements of the fixed and rocking frames are about the same. It is also noted that the effect of the vertical impact on the column associated with touchdown of the base plate is small because the difference in tensile and compressive forces is primarily due to the self‐limiting tensile force in the column caused by yielding of the base plate. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
8.
We reformulate the original model of Hatchell and Bourne and Røste, Stovas and Landrø that couples fractional velocity change to subsurface strain via a fundamental constant R. The new model combines elastic compressibility of a dual‐porosity system for a sand–shale mixture with horizontal planes of inter‐granular weakness. The majority of observed R‐factor magnitudes from post‐stack 4D seismic data in both the reservoir and overburden can thus be explained. R is predicted to depend strongly on lithology and also initial strain state. The model is also extended to predict the observed angle‐dependence of time‐lapse time‐shifts from pre‐stack data. An expression for the gradient of time‐shift with incidence angle is obtained in terms of the background VP/VS, and also the ratio of tangential to normal compliances BT/BN representing loss or creation of inter‐granular coupling. If accurately estimated from data, this compliance ratio can be used as an additional parameter to assess the post‐production state of the overburden. It is concluded that whilst R remains the over‐arching parameter controlling the magnitude of time‐shifts measured from 4D seismic data, BT/BN is a subtler parameter that may also prove of future value. 相似文献
9.
Intensity measures for probabilistic assessment of non‐structural components acceleration demand 下载免费PDF全文
下载免费PDF全文 Marco De Biasio Stephane Grange Frederic Dufour Frederic Allain Ilie Petre‐Lazar 《地震工程与结构动力学》2015,44(13):2261-2280
A fundamental issue in the framework of seismic probabilistic risk analysis is the choice of ground motion intensity measures (IMs). Based on the floor response spectrum method, the present contribution focuses on the ability of IMs to predict non‐structural components (NSCs) horizontal acceleration demand. A large panel of IMs is examined and a new IM, namely equipment relative average spectral acceleration (E‐ASAR), is proposed for the purpose of NSCs acceleration demand prediction. The IMs efficiency and sufficiency comparisons are based on (i) the use of a large dataset of recorded earthquake ground motions; (ii) numerical analyses performed on three‐dimensional numerical models, representing actual structural wall and frame buildings; and (iii) systematic statistical analysis of the results. From the comparative study, the herein introduced E‐ASAR shows high efficiency with respect to the estimation of maximum floor response spectra ordinates. Such efficiency is particularly remarkable in the case of structural wall buildings. Besides, the sufficiency and the simple formulation allowing the use of existing ground motion prediction models make the E‐ASAR a promising IMs for seismic probabilistic risk assessment. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
10.
11.
Heavily populated by Beijing and Tianjin cities, Bohai basin is a seismically active Cenozoic basin suffering from huge lost by devastating earthquakes, such as Tangshan earthquake. The attenuation (QP and QS) of the surficial Quaternary sediment has not been studied at natural seismic frequency (1?10 Hz), which is crucial to earthquake hazards study. Borehole seismic records of micro earthquake provide us a good way to study the velocity and attenuation of the surficial structure (0?500 m). We found that there are two pulses well separated with simple waveforms on borehole seismic records from the 2006 MW4.9 Wen'an earthquake sequence. Then we performed waveform modeling with generalized ray theory (GRT) to confirm that the two pulses are direct wave and surface reflected wave, and found that the average vP and vS of the top 300 m in this region are about 1.8 km/s and 0.42 km/s, leading to high vP/vS ratio of 4.3. We also modeled surface reflected wave with propagating matrix method to constrain QS and the near surface velocity structure. Our modeling indicates that QS is at least 30, or probably up to 100, much larger than the typically assumed extremely low Q (~10), but consistent with QS modeling in Mississippi embayment. Also, the velocity gradient just beneath the free surface (0?50 m) is very large and velocity increases gradually at larger depth. Our modeling demonstrates the importance of borehole seismic records in resolving shallow velocity and attenuation structure, and hence may help in earthquake hazard simulation. 相似文献
12.
The design of a three‐story buckling‐restrained braced frame (BRBF) with a single‐diagonal sandwiched BRB and corner gusset was evaluated in cyclic tests of a one‐story, one‐bay BRBF subassembly and dynamic analyses of the frame subjected to earthquakes. The test focused on evaluating (1) the seismic performance of a sandwiched BRB installed in a frame, (2) the effects of free‐edge stiffeners and dual gusset configurations on the corner gusset behavior, (3) the frame and brace action forces in the corner gusset, and (4) the failure mode of the BRBF under the maximum considerable earthquake level. The subassembly frame performed well up to a drift of 2.5% with a maximum axial strain of 1.7% in the BRB. Without free‐edge stiffeners, the single corner gusset plate buckled at a significantly lower strength than that predicted by the specificationof American Institute of Steel Construction (2005). The buckling could be eliminated by using dual corner gusset plates similar in size to the single gusset plate. At low drifts, the frame action force on the corner gusset was of the same magnitude as the brace force. At high drifts, however, the frame action force significantly increased and caused weld fractures at column‐to‐gusset edges. Nonlinear time history analyses were performed on the three‐story BRBF to obtain seismic demands under both design and maximum considerable levels of earthquake loading. The analytical results confirmed that the BRB and corner gusset plate achieved peak drift under cyclic loading test. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
13.
Earthquake‐induced loss assessment of steel frame buildings with special moment frames designed in highly seismic regions 下载免费PDF全文
下载免费PDF全文 This paper discusses an analytical study that quantifies the expected earthquake‐induced losses in typical office steel frame buildings designed with perimeter special moment frames in highly seismic regions. It is shown that for seismic events associated with low probabilities of occurrence, losses due to demolition and collapse may be significantly overestimated when the expected loss computations are based on analytical models that ignore the composite beam effects and the interior gravity framing system of a steel frame building. For frequently occurring seismic events building losses are dominated by non‐structural content repairs. In this case, the choice of the analytical model representation of the steel frame building becomes less important. Losses due to demolition and collapse in steel frame buildings with special moment frames designed with strong‐column/weak‐beam ratio larger than 2.0 are reduced by a factor of two compared with those in the same frames designed with a strong‐column/weak‐beam ratio larger than 1.0 as recommended in ANSI/AISC‐341‐10. The expected annual losses (EALs) of steel frame buildings with SMFs vary from 0.38% to 0.74% over the building life expectancy. The EALs are dominated by repairs of acceleration‐sensitive non‐structural content followed by repairs of drift‐sensitive non‐structural components. It is found that the effect of strong‐column/weak‐beam ratio on EALs is negligible. This is not the case when the present value of life‐cycle costs is selected as a loss‐metric. It is advisable to employ a combination of loss‐metrics to assess the earthquake‐induced losses in steel frame buildings with special moment frames depending on the seismic performance level of interest. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
14.
利用山东台网记录的长岛震群2017年2月14日—9月1日期间的波形与震相资料研究长岛地区非弹性衰减系数,得到该地区介质平均Q值与频率f的关系式为Q(f)=363.9f1.374 1。采用Moya等[1]提出的利用遗传算法联合反演得到长岛周边台站的场地响应,根据Brune模型震源参数计算公式求解长岛震群序列地震震源参数。结果显示,各个震源参数之间均存在一定的相关关系,地震矩随ML震级的增大而增加,地震矩与破裂半径R之间存在半对数关系,拐角频率fc随地震矩的增大而减少;长岛地震序列的应力降数值普遍偏小,最大不超过0.9MPa,这意味着长岛震源区整体构造应力较低,也可能指示长岛震群为低摩擦应力的断层作用;震源参数随时间的变化方面,整体而言,长岛震群地震应力降变化起伏很大,在M4.1地震发生前,拐角频率与应力降均发生快速下降后随即翻转上升的现象,证明在M4.1地震发生前震源区整体应力的挤压逐渐增强。 相似文献
15.
Seismic performance and damage evaluation of a reinforced concrete frame with hysteretic dampers through shake‐table tests 下载免费PDF全文
下载免费PDF全文 Passive energy dissipation devices are increasingly implemented in frame structures to improve their performance under seismic loading. Most guidelines for designing this type of system retain the requirements applicable to frames without dampers, and this hinders taking full advantage of the benefits of implementing dampers. Further, assessing the extent of damage suffered by the frame and by the dampers for different levels of seismic hazard is of paramount importance in the framework of performance‐based design. This paper presents an experimental investigation whose objectives are to provide empirical data on the response of reinforced concrete (RC) frames equipped with hysteretic dampers (dynamic response and damage) and to evaluate the need for the frame to form a strong column‐weak beam mechanism and dissipate large amounts of plastic strain energy. To this end, shake‐table tests were conducted on a 2/5‐scale RC frame with hysteretic dampers. The frame was designed only for gravitational loads. The dampers provided lateral strength and stiffness, respectively, three and 12 times greater than those of the frame. The test structure was subjected to a sequence of seismic simulations that represented different levels of seismic hazard. The RC frame showed a performance level of ‘immediate occupancy’, with maximum rotation demands below 20% of the ultimate capacity. The dampers dissipated most of the energy input by the earthquake. It is shown that combining hysteretic dampers with flexible reinforced concrete frames leads to structures with improved seismic performance and that requirements of conventional RC frames (without dampers) can be relieved. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
16.
17.
A full‐scale shake table test on a six‐story reinforced concrete wall frame structure was carried out at E‐Defense, the world's largest three‐dimensional earthquake simulation facility, in January 2006. Story collapse induced from shear failure of shear critical members (e.g., short columns and shear walls) was successfully produced in the test. Insights gained into the seismic behavior of a full‐scale specimen subjected to severe earthquake loads are presented in this paper. To reproduce the collapse process of the specimen and evaluate the ability of analytical tools to predict post‐peak behavior, numerical simulation was also conducted, modeling the seismic behavior of each member with different kinds of models, which differ primarily in their ability to simulate strength decay. Simulated results showed good agreement with the strength‐degrading features observed in post‐peak regions where shear failure of members and concentrated deformation occurred in the first story. The simulated results tended to underestimate observed values such as maximum base shear and maximum displacement. The effects of member model characteristics, torsional response, and earthquake load dimensions (i.e., three‐dimensional effects) on the collapse process of the specimen were also investigated through comprehensive dynamic analyses, which highlighted the following seismic characteristics of the full‐scale specimen: (i) a model that is incapable of simulating a specimen's strength deterioration is inadequate to simulate the post‐peak behavior of the specimen; (ii) the torsional response generated from uniaxial eccentricity in the longitudinal direction was more significant in the elastic range than in the inelastic range; and (iii) three‐dimensional earthquake loads (X–Y–Z axes) generated larger maximum displacement than any other loading cases such as two‐dimensional (X–Y or Y–Z axes) or one‐dimensional (Y axis only) excitation. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
18.
ＴｈｅｒｅｇｉｏｎａｌｃｈａｒａｃｔｅｒｉｓｔｉｃｓｏｆｓｅｉｓｍｉｃａｃｔｉｖｉｔｙｉｎＣｈｉｎａＺｈｅｎ－ＬｉａｎｇＳＨＩ，ＪｉａｎＷＡＮＧａｎｄＸｉａｏ－ＤｏｎｇＺＨＡＮＧ（时振梁，王健，张晓东）（ＩｎｓｔｉｔｕｔｅｏｆＧｅｏｐｈｙｓｉｃｓ，Ｓ... 相似文献
19.
20.
A series of Hokkaido events, recorded by the FBV Broadband Seismograph System at the KHC Seismic Station, is used to study the structure of the earthquake magnitude scale on the basis of maximum velocity amplitudesA
vmax of teleseismicPwaves in different period bands. Amplitude-periodband (APB) diagrams are constructed for each event. According to the shape of the APB diagrams the events investigated can be divided into three types: (a) events with largestA
vmax values in the intermediate period range (periods ofA
vmax from 2.2 to 23 sec), (b) events with largestA
vmax values in the short-period range (periods ofA
vmax from 1 to 2 sec), (c) events exhibiting anomalous APB diagrams. Type (a) events seem to represent the process of wave generation that prevails for shallow earthquakes. Type (b) events approach to explosive-like generation of seismic waves. The nature of the exceptionally occurring type (c) events must be clarified in further investigations. The influence of the type of earthquake on the magnitude values estimated on the basis of standard class A and B (short-period and intermediate-band) seismograms is demonstrated. It appears that for estimating correct values of earthquake magnitudes complementary information on the process of seismic wave generation in the focus is necessary. At teleseismic distances this information can be obtained from either APB diagrams or amplitude spectra ofP waves recorded, e.g., by broadband velocity sensing instruments. 相似文献