共查询到20条相似文献，搜索用时 31 毫秒
1.
C.A. Alfonso P.E. Sacks D.T. Secor J. Rine V. Perez 《Journal of South American Earth Sciences》1994,7(3-4)
Surface geology and heophysical data, supplemented by regional structural interpretations, indicate that the Valle del Cauca basin and adjacent areas in west-central Colombia form a west-vergent, basement-involved fold and thrust belt. This belt is part of a Cenozoic orogen developed along the west side of the Romeral fault system. Structural analysis and geometrical constraints show that the Mesozoic ophiolitic basement and its Cenozoic sedimentary cover are involved in a “thick-skinned” west-vergent foreland style deformation. The rocks are transported and shortened by deeply rooted thrust faults and stacked in imbricate fashion. The faults have a NE---SW regional trend, are listric in shape, developed as splay faults which are interpreted as joining a common detachment at over 10 km depth. The faults carry Paleogene sedimentary strata and Cretaceous basement rocks westward over Miocene strata of the Valle del Cauca Basin. Fold axes trend parallel or sub parallel to the thrust faults. The folds are westwardly asymmetrical with parallel to kink geometry, and are interpreted to be fault-propagation folds stacked in an imbricate thrust system. Stratigraphic evidence suggests that the Valle del Cauca basin was deformed between Oligocene and upper Miocene time. The kinematic history outlined above is consistent with an oblique convergence between the Panama and South American plates during the Cenozoic.A negative residual Bouguer anomaly of 20–70 mgls in the central part of the Valle del Cauca basin indicates that a substantial volume of low density sedimentary rocks is concealed beneath the thrust sheets exposed at the land surface. The hydrocarbon potential of the Valle del Cauca should be reevaluated in light of the structural interpretations presented in this paper. 相似文献
2.
The Somogy hills are located in the Pannonian Basin, south of Lake Balaton, Hungary, above several important tectonic zones. Analysis of industrial seismic lines shows that the pre-Late Miocene substratum is deformed by several thrust faults and a transpressive flower structure. Basement is composed of slices of various Palaeo-Mesozoic rocks, overlain by sometimes preserved Paleogene, thick Early Miocene deposits. Middle Miocene, partly overlying a post-thrusting unconformity, partly affected by the thrusts, is also present. Late Miocene thick basin-fill forms onlapping strata above a gentle paleo-topography, and it is also folded into broad anticlines and synclines. These folds are thought to be born of blind fault reactivation of older thrusts. Topography follows the reactivated fold pattern, especially in the central-western part of the study area.
The map pattern of basement structures shows an eastern area, where NE–SW striking thrusts, folds and steep normal faults dominate, and a western one, where E–W striking thrusts and folds dominate. Folds in Late Neogene are also parallel to these directions. A NE–SW striking linear normal fault and associated N–S faults cut the highest reflectors. The NE–SW fault is probably a left-lateral master fault acting during–after Late Miocene. Gravity anomaly and Pleistocene surface uplift maps show a very good correlation to the mapped structures. All these observations suggest that the main Early Miocene shortening was renewed during the Middle and Late Miocene, and may still persist.
Two types of deformational pattern may explain the structural and topographic features. A NW–SE shortening creates right-lateral slip along E–W faults, and overthrusts on NE–SW striking ones. Another, NNE–SSW shortening creates thrusting and uplift along E–W striking faults and transtensive left-lateral slip along NE–SW striking ones. Traces of both deformation patterns can be found in Quaternary exposures and they seem to be consistent with the present day stress orientations of the Pannonian Basin, too. The alternation of stress fields and multiple reactivation of the older fault sets is thought to be caused by the northwards translation and counter-clockwise rotation of Adria and the continental extrusion generated by this convergence. 相似文献
3.
Structural analysis of the Gachsar sub-zone in central Alborz range; constrain for inversion tectonics followed by the range transverse faulting 总被引：1，自引：0，他引：1
Analysis of the Gachsar structural sub-zone has been carried out to constrain structural evolution of the central Alborz range
situated in the central Alpine Himalayan orogenic system. The sub-zone bounded by the northward-dipping Kandovan Fault to
the north and the southward-dipping Taleghan Fault to the south is transversely cut by several sinistral faults. The Kandovan
Fault that controls development of the Eocene rocks in its footwall from the Paleozoic–Mesozoic units in the fault hanging
wall is interpreted as an inverted basin-bounding fault. Structural evidences include the presence of a thin-skinned imbricate
thrust system propagated from a detachment zone that acts as a footwall shortcut thrust, development of large synclines in
the fault footwall as well as back thrusts and pop-up structures on the fault hanging wall. Kinematics of the inverted Kandovan
Fault and its accompanying structures constrain the N–S shortening direction proposed for the Alborz range until Late Miocene.
The transverse sinistral faults that are in acute angle of 15° to a major magnetic lineament, which represents a basement
fault, are interpreted to develop as synthetic Riedel shears on the cover sequences during reactivation of the basement fault.
This overprinting of the transverse faults on the earlier inverted extensional fault occurs since the Late Miocene when the
south Caspian basin block attained a SSW movement relative to the central Iran. Therefore, recent deformation in the range
is a result of the basement transverse-fault reactivation. 相似文献
4.
Records of lithospheric extension and mountain-range uplift are most continuously contained within syntectonic sedimentary rocks in basins adjacent to large structural culminations. In southeastern Arizona, metamorphic core complexes form mountain ranges with the highest elevations in the region, and supposedly much less extended terranes lie at lower elevations. Adjacent to the Santa Catalina-Rincon metamorphic core complex, within the Tucson Basin, stratigraphic-sequence geometries evident in a large suite of 2-D seismic reflection data suggest a two-phase basin-evolution model controlled by the emplacement and subsequent uplift of the core complex. In its earliest stage, Phase I of basin formation was characterized by extensive faults forming relatively small-scale proto-basins, which coalesced with the larger basin-bounding detachment fault system. Synextensional sedimentation within the enlarging basin is evidenced by sediment-growth packages, derived from adjacent footwall material, fanning into brittle hanging-wall faults. During this phase, volcanism was widespread, and growth packages contain interbedded sediments and volcanic products but, paradoxically, no mylonitic clasts from the adjacent metamorphic core complex. Phase II of basin evolution begins after a significant tectonic hiatus and consists of a symmetric deepening of the central basin with the introduction of mylonitic clasts in the basin fill. This is coupled with the activation of a series of high-angle normal faults ringing the core complex. These observations suggest a two-phase model for metamorphic core complex evolution, with an initial stage of isostatic core complex emplacement during detachment faulting that resulted in little topographic expression. This was followed, after a significant tectonic hiatus, by late-stage exhumation and flexural uplift of the Santa Catalina-Rincon metamorphic core complex through younger high-angle faulting. Moreover, the geometry of upper basin fill units suggests an extremely low effective elastic thickness in the region and that flexural uplift of the core complex induced asymmetric transfer of ductile mid-crustal rocks from beneath the subsiding Tucson Basin to the uplifting mountain range. 相似文献
5.
基于重磁场特征的松辽盆地基底岩性研究 总被引：2，自引：0，他引：2
盆地的基底埋藏深度、岩性和断裂分布与地热资源的形成、分布和开发利用密切相关。本文基于重磁方法的特点和松辽盆地的重磁场异常,利用最佳向上延拓的方法进行场源分离,提取了基底重磁异常信息;依据不同岩石物理属性(密度和磁性)和重磁异常对应分析的结果,对松辽盆地的基底岩性分布进行了划分,其结果对盆地地热资源远景评价和开发利用有重要参考价值。 相似文献
6.
《Geodinamica Acta》2001,14(1-3):147-158
Central Anatolia has undergone complex Neotectonic deformation since Late Miocene–Pliocene times. Many faults and intracontinental basins in this region were either formed, or have been reactivated, during this period. The eastern part of central Anatolia is dominated by a NE–SW-trending, left lateral transcurrent structure named the Central Anatolian fault zone located between Sivas in the northeast and west of Mersin in the southwest. Around the central part, it is characterized by transtensional depressions formed by left stepping and southward bending of the fault zone.Pre-Upper Miocene basement rocks of the region consist of the central Anatolian crystalline complex and a sedimentary cover of Tertiary age. These rock units were strongly deformed by N–S convergence. The entire area emerged to become the site of erosion and formed a vast plateau before the Late Miocene. A NE–SW-trending extensional basin developed on this plateau in Late Miocene–Early Pliocene times. Rock units of this basin are characterized by a thick succession of pyroclastic rocks intercalated with calcalkaline–alkaline volcanics. The volcanic sequence is unconformably overlain by Pliocene lacustrine–fluviatile deposits intercalated with ignimbrites and tuffs. Thick, coarse grained alluvial/colluvial fan deposits of marginal facies and fine grained clastics and carbonates of central facies display characteristic synsedimentary structures with volcanic intercalations. These are the main lines of evidence for development of a new transtensional Hırka–Kızılırmak basin in Pliocene times. Reactivation of the main segment of the Central Anatolian fault zone has triggered development of depressions around the left stepping and southward bending of the central part of this sinistral fault zone in the ignimbritic plateau during Late Pliocene–Quaternary time. These transtensional basins are named the Tuzla Gölü and Sultansazlığı pull-apart basins. The Sultansazlığı basin has a lazy S to rhomboidal shape and displays characteristic morphologic features including a steep and stepped western margin, large alluvial and colluvial fans, and a huge composite volcano (the Erciyes Dağı).The geometry of faulting and formation of pull-apart basins can be explained within the framework of tectonic escape of the wedge-like Anatolian block, bounded by sinistral East Anatolian fault zone and dextral North Anatolian transform fault zone. This escape may have been accomplished as lateral continental extrusion of the Anatolian Plate caused by final collision of the Arabian Plate with the Eurasian Plate. 相似文献
7.
A system of left-lateral faults that separates the South American and Scotia plates, known as the Magallanes-Fagnano fault system, defines the modern tectonic setting of the southernmost Andes and is superimposed on the Late Cretaceous – Paleogene Patagonian fold-thrust belt. Fault kinematic data and crosscutting relationships from populations of thrust, strike-slip and normal faults from Peninsula Brunswick adjacent to the Magallanes-Fagnano fault system, presented herein, show kinematic and temporal relationships between thrust faults and sets of younger strike-slip and normal faults. Thrust fault kinematics are homogeneous in the study area and record subhorizontal northeast-directed shortening. Strike-slip faults record east—northeast-directed horizontal shortening, west—northwest-directed horizontal extension and form Riedel and P-shear geometries compatible with left-lateral slip on the main splay of the Magallanes-Fagnano fault system. Normal faults record north-south trending extension that is compatible with the strike-slip faults. The study area occurs in a releasing step-over between overlapping segments of the Magallanes-Fagnano fault system, which localized on antecedent sutures between basement terranes with differing geological origin. Results are consistent with regional tectonic models that suggest sinistral shearing and transtension in the southernmost Andes was contemporaneous with the onset of seafloor spreading in the Western Scotia Sea during the Early Miocene. 相似文献
8.
《Geodinamica Acta》2002,15(5-6):277-288
A close relationship between formation of approximately upright folds with axes normal to the extension direction and ramp/flat extensional geometries is established for well exposed Neogene syn-extensional rocks on the presently low-angle Gediz detachment fault, along the southern margin of the Gediz Graben region of western Anatolia, Turkey. Three unconformity-bounded sedimentary sequences and several metamorphic extensional allochthons were mapped in the upper-plate of the Gediz detachment. The oldest sedimentary sequence consists of deformed and folded strata of sandstones and conglomerates that are regarded as being deposited in a supra-detachment basin during the Miocene–Early Pliocene. This unit rests unconformably on the extensional allochthonous, but directly in fault contact with the lower-plate mylonitic rocks. The younger slightly tilted Late Pliocene–Pleistocene sedimentary sequences are post-detachment units that are controlled by EW-trending high-angle normal faults. The youngest alluvium comprises the undeformed present-day basin fill of the Gediz Graben. The supra-detachment sedimentary rocks contain a number of kilometric-scale longitudinal folds that are nearly parallel to the east-west-trending fault system of the Gediz Graben. The folds have a steeply inclined bisecting surface, an interlimb angle of 130–150°, and a plunge of <10°. These folds may be interpreted to form as a result of bending in the underlying Gediz detachment fault. The bending may have an alternation of ramp and flat geometries on which a hanging-wall syncline and rollover anticline formed, respectively. This study again shows the importance of local geology in understanding of some spectacular structures of the extensional basins. 相似文献
9.
Philipp Strauss Michael Wagreich Kurt Decker Reinhard F. Sachsenhofer 《International Journal of Earth Sciences》2001,90(3):549-559
The Miocene intramontane Fohnsdorf-Seckau Basin is situated at the junction of the sinistral Mur-Mürz-fault system and the dextral Pöls-Lavanttal fault system. The basin comprises a 2,400-m-thick coal-bearing fluviodeltaic-lacustrine succession (Lower to Middle Miocene, Upper Karpatian?/Lower Badenian) which is overlain by a 1,000-m-thick alluvio-deltaic conglomeratic succession (Apfelberg Formation, ?Middle/Upper Badenian) in the south. A three-stage model for the basin evolution has been reconstructed from structural analysis and basin fill geometries. During a first pull-apart phase, subsidence occurred along ENE-trending, sinistral strike-slip faults of the Mur-Mürz fault system and NE-SW to N-S-trending normal faults, forming a composite pull-apart basin between overstepping en-echelon strike-slip faults. The Seckau and Fohnsdorf sub-basins are considered as two adjacent pull-aparts which merged into one basin. During the second phase, N-S to NNW-SSE extension and normal faulting along the southern basin margin fault formed a half-graben, filled by wedge-shaped alluvial strata (Apfelberg Formation). During the third phase, after the end of basin sedimentation, the dextral Pöls-Lavanttal fault system reshaped the western basin margin into a positive flower structure. 相似文献
10.
In the area around Delgo in north-east Sudan a narrow NNE-trending Neoproterozoic belt of low grade volcanosedimentary rocks is fringed by high grade migmatitic basement blocks. The volcanosedimentary sequence is structurally overlain by a rock body of several kilometres length, which is composed of metamorphosed ultramafic and mafic rocks. This sequence is interpreted as an island arc-ophiolite association representing a suture zone.With respect to their degrees of metamorphism and their structural characteristics, the lithological units of the Delgo area are significantly different from the adjacent basement rocks in the east and west. The lithological contacts of the metavolcanic-metasedimentary rocks with the basement rocks are often marked by intermediate-dipping mylonites which are locally overprinted by ductile to brittle-ductile strike-slip faults.The Delgo suture evolved through the subduction-related closure of an oceanic basin and final collision of the island arc with the migmatitic basement blocks on either side of the oceanic basin. Peak metamorphism of deeply buried back-arc basin sequences occurred at around 700 Ma ago. During the collision stage, island arc rocks, passive margin sequences and ophiolitic rocks were thrust to the east and west over the basement blocks, causing limited crustal thickening and a minor isostatic rebound.Lithospheric extension associated with increasing heat flow caused migmatization in the basement between ca. 580 and 540 Ma ago. The development of numerous intermediate-dipping mylonitic shear zones at decreasing temperatures post-dates the migmatization. Lithospheric extension may explain the juxtaposition of rocks which were formed and/or metamorphosed at significantly different crustal levels. 相似文献
11.
The Shortland Islands lie in a northeast-southwest line across the western end of Solomon Islands, immediately adjacent to Bougainville. Three major islands dominate the group.Fauro and surrounding islands, in the northeast, have an altered basement suite comprising tholeiite, icelandite and tholeiitic dacite. This is intruded by a high-level calc-alkaline assemblage of microdiorite, hornblende andesite and rhyodacite and overlain by volcanogenic sandstones derived from an andesitic to dacitic volcano. Pyroclastics comprising high-alumina basalt and pyroxene andesite overlie the volcanogenic sandstones. The tholeiitic basement lavas may be of Late Oligocene to Early Miocene age, and the calc-alkaline rocks are probably also pre-Pliocene in age.Alu, in the centre of the group, also has an altered tholeiitic lava basement, which is intruded by a quartz diorite body and overlain by hypersthene-augite basaltic andesite. Pliocene siltstone and Quaternary shallow marine carbonates cover these igneous rocks over much of the island.Mono, in the southwest, has a small basement exposure of altered pillowed hawaiite, overlain by Miocene pelagic limestone, Pliocene siltstone and Quaternary reef limestone. Isolated clasts of pyroxene andesite and ?benmoreite occur in streams and on beaches.The younger, calc-alkaline suites on all islands were formed in an island arc environment, possibly related to subduction from the southwest beneath the New Britain Trench. The basement lavas on Alu are probably early island arc tholeiites, and both these lavas and the calc-alkaline rocks of Alu share a common trend on variation diagrams. The two igneous suites of Fauro, however, have distinctly different trends. The basement lavas have some chemical similarities with oceanic tholeiites, but an early island arc origin for these lavas cannot be ruled out. The altered hawaiite and benmoreite on Mono probably originated in an oceanic island environment. 相似文献
12.
The Chauki, Mandi, Manil colony, Changpur, Khawas and Naghal areas are situated in between the limbs of Hazara Kashmir Syntaxis (HKS). HKS is the part of Himalayan fold and thrust belt that lies in sub-Himalayan domain. Seismically, this is an active zone. Early Miocene to Recent sedimentary rocks are exposed in the area. The stratigraphic units in Kashmir basin are the cover sequence of the Indian plate. These non-marine lithostratigraphic units are molasse deposits formed by the deposition of sediments coming from north carried by the rivers originated from higher Himalayas. Murree Formation of early Miocene age is the oldest rock unit in the studied area. Siwalik Group; Chinji, Nagri, Dhok Pathan and Soan formations of early Miocene to Pliocene and Mirpur Formation of Pleistocene age is exposed. The area is structurally deformed into folds and faults. The Sarda Sarhota syncline, Mandi syncline and Fagosh anticline are major folds in the area. These folds are isoclinal to open in nature, southwest or northeast verging and thrust direction is southwest or northeast. Major reverse faults are Riasi fault and Fagosh fault. The Changpur fault is a normal fault. Primary sedimentary structures present in the area are load cast, ripups and cross bedding. The facing of beds have been marked on the basis of these sedimentary structures. 相似文献
13.
Kadir Dirik 《Geodinamica Acta》2013,26(1-3):147-158
AbstractCentral Anatolia has undergone complex Neotectonic deformation since Late Miocene-Pliocene times. Many faults and intracontinental basins in this region were either formed, or have been reactivated, during this period. The eastern part of central Anatolia is dominated by a NE-SW-trending, left lateral transcurrent structure named the Central Anatolian fault zone located between Sivas in the northeast and west of Mersin in the southwest. Around the central part, it is characterized by transtensional depressions formed by left stepping and southward bending of the fault zone. Pre-Upper Miocene basement rocks of the region consist of the central Anatolian crystalline complex and a sedimentary cover of Tertiary age. These rock units were strongly deformed by N-S con- vergence. The entire area emerged to become the site of erosion and formed a vast plateau before the Late Miocene. A NE-SW- trending extensional basin developed on this plateau in Late Miocene-Early Pliocene times. Rock units of this basin are characterized by a thick succession of pyroclastic rocks intercalated with calcalkaline-alkaline volcanics. The volcanic sequence is uncon- formably overlain by Pliocene lacustrine-fluviatile deposits interrelated with ignimbrites and tuffs. Thick, coarse grained alluvial/colluvial fan deposits of marginal facies and fine grained elastics and carbonates of central facies display characteristic synsedimentary structures with volcanic intercalations. These are the main lines of evidence for development of a new transtensional H?rka— k?zd?rmak basin in Pliocene times. Reactivation of the main segment of the Central Anatolian fault zone has triggered development of depressions around the left stepping and southward bending of the central part of this sinistral fault zone in the ignimbritic plateau during Late Pliocene-Quaternary time. These transtensional basins are named the Tuzla Gölü and Sultansazl??? pull-apart basins. The Sultansazl??? basin has a lazy S to rhomboidal shape and displays characteristic morphologic features including a steep and stepped western margin, large alluvial and colluvial fans, and a huge composite volcano (the Erciyes Da??).The geometry of faulting and formation of pull-apart basins can be explained within the framework of tectonic escape of the wedgelike Anatolian block, bounded by sinistral East Anatolian fault zone and dextral North Anatolian transform fault zone. This escape may have been accomplished as lateral continental extrusion of the Anatolian Plate caused by final collision of the Arabian Plate with the Eurasian Plate. © 2001 Éditions scientifiques et médicales Elsevier SAS 相似文献
14.
Folds in the Huasna area of the southern Coast Ranges of California provide an opportunity to study different fold forms and to estimate dimensional and relative rheological properties of rocks at the time of folding. Plunging, concentric-like and chevron-like folds with wavelengths ranging from about 0.1 to 1 km are clearly visible in natural exposures at the south end of the Huasna syncline, which has a wavelength of 12–16 km. Examination of two fresh roadcut exposures in the Miocene Monterey Formation suggests that folding within part of the Monterey was accommodated primarily by layer-parallel slip between structural layers with thicknesses ranging from 30 to 43 m, even though lithologic layers range from a few mm to a few dm in thickness. This part of the Monterey is folded into a series of concentric-like folds, with chevron-like folds at their cores and with a ratio of wavelength to total thickness of layers of about
. Theoretical analysis of multilayers, comprised of identical, elastic or elastic—plastic layers with frictionless contacts, indicates that the effective, or weighted-average thickness of structural layers corresponding with an
ratio of 0.42 is about 41 m. Thus, the theoretical predictions are roughly in agreement with available data concerning these folds.Thicknesses of structural units in other folds of this area are inadequately known to closely check theoretical predictions, but most of the data are consistent with predictions. An exception is the Huasna syncline which has a larger wavelength than we would predict. There are several likely explanations for this discrepancy. Layers in the underlying Franciscan complex may have taken part in the folding, making our estimates of total thickness too small. The basement rocks may have been much softer, relative to the overlying sedimentary rocks, than we assumed. The Huasna syncline could be partly a result of gravitational instability of relatively low density, Miocene siliceous and porcelaneous shales, overlain by relatively high density, Pliocene sandstones.The Huasna syncline and some of the smaller folds in the Miocene rocks are doubly in the northwest—southeast direction. Further, the maximum compression was approximately normal to the traces of the large faults in this part of California. 相似文献
15.
晋东北地区燕山运动的基本特征——来自1:25万应县幅区域地质调查的总结 总被引：2，自引：0，他引：2
晋东北地区燕山期地壳活动剧烈而频繁, 经历了3次由伸展→挤压转换→隆升和岩浆活动过程。燕山运动早期形成早侏罗世断陷盆地和中侏罗世挤压坳陷型聚煤构造盆地; 中期中晚侏罗世形成被NW、NE向深大断裂围限的火山断陷盆地, 中基性-酸性火山喷发和浅成、超浅成中酸性岩浆侵入, 晚侏罗世末形成了一系列NNE向褶皱和逆冲推覆构造带; 晚期早白垩世再次形成断陷盆地和开阔平缓褶皱, 义县组不整合在火山岩之上, 晚白垩世处于挤压造山后的山体隆升阶段, 左云组不整合在义县组之上, 伴随有壳源型花岗岩侵入, NW、NE向断裂复活, 形成地堑、地垒式断裂组合, 导致山体隆升。 相似文献
16.
对鄂尔多斯盆地基底断裂特征及其活动性作了总结、归纳与分析。结果表明,鄂尔多斯盆地不仅是一个四周被活动断裂或深大断裂围限的块体,其内部还存在大量规模不等的基底断裂,并具有明显的分区特征。盆地内基底断裂带可分成4组：几乎贯穿整个盆地的华池-米脂-大同北东向断裂带;盆地北部的多条东西向断裂带和中部的定边-绥德、南部的庆阳-富县-宜川等东西向断裂带;中部发育的定边-吴起、乌审旗-榆林北西向断裂带与盆地东西两侧的近南北向巨型断裂带。鄂尔多斯盆地内存在的现代构造地貌以及普遍发育的雁行状、X共轭状节理等现象,是新构造运动的直接表现;盆地内存在的深部流体活动信息、现代地球化学景观特征以及众多的小地震、微地震活动及其与基底构造的密切关系,反映了这些断裂的现代活动性。 相似文献
17.
Jordi Pujadas Josep Maria Casas Josep Anton Muñoz Francese Sabat 《Geodinamica Acta》2013,26(3):195-206
AbstractThe structure of the southern Pyrenees, east of the Albanyà fault (Empordà area), consists of several Alpine thrust sheets. From bottom upwards three main structural units can be distinguished : the Roc de Frausa, the Biure-Bac Grillera and the Figueres units. The former involves basement and Paleogene cover rocks. This unit is deformed by E-W trending kilometric-scale folds, its north dipping floor thrust represents the sole thrust in this area. The middle unit is formed by an incomplete Mesozoic succession overlain by Garumnian and Eocene sediments. Mesozoic rocks internal structure consists of an imbricate stack. The floor thrust dips to the south and climbs up section southwards. The upper unit exibits the most complete Mesozoic sequence. Its floor thrust is subhorizontal. The lower and middle units thrust in a piggy-back sequence. The upper unit was emplaced out of sequence.Lower Eocene sedimentation in the Biure-Bac Grillera unit was controlled by emergent imbricate thrusts and synchronic extensional faults. One of these faults (La Salut fault) represents the boundary between a platform domain in the footwall and a subsident trough in the hangingwall. Southward thrust propagation produces the inversion of these faults and the development of cleavage-related folds in their hangingwalls (buttressing effect). This inversion is also recorded by syntectonic deposits, which have been grouped in four depositional sequences. The lower sequences represent the filling on the hangingwall trough and the upper sequences the spreading of clastics to the south once the extensional movement ends. 相似文献
18.
The Cappadocian Volcanic Province (CVP) comprises predominantly of a thick succession of volcanogenic rocks and interbedded siliciclastic sediments of Middle Miocene to Recent age in Central Anatolia, Turkey. The conditions of basin development in the eastern part of the CVP have been elucidated by using sedimentological and geomorphological approaches. The prevailing tectonic regime, its extent and causes are also discussed. Sedimentological analysis supported by geomorphological observations revealed a major NE-trending probably normal, border fault and its several synthetics. This tectonic element constitutes the SE margin of the basin and divided the CVP from the Tauride range during Middle Miocene to Pliocene. The basin fill in the study area comprises gravelly alluvial fans near the border fault, while fluvial clastics and lacustrine carbonates dominate towards the centre. Some pyroclastic rocks and lava flows are also made part of the fill. The southeastern basin margin is characterized morphologically by a number of uplifted basement blocks, probably associated with synthetic faults, and some deeply incised canyons in the footwall. These canyons were subsequently filled with a Mid-Pliocene ignimbrite sheet, and represent the sediment supply conduits to the basin. The cessation of filling in the basin was determined by strike-slip faults that uplifted and detached the basin about 2.6 Ma. This date also marks the onset of the neotectonic period in the region. The overall extensional tectonic regime inferred for the eastern CVP appears coeval with events recognised in the southern basins, i.e. Adana and Mut Basins and the eastern Mediterranean. Some physical connections between these basins also have been demonstrated. It is suggested that the CVP and the southern basins were all created during a phase of extension resulting from continued northward subduction of the African plate beneath the Eurasia during the Late Cenozoic. 相似文献
19.
Paleomagnetism together with an analysis of the internal structure of the Bicorb-Quesa and northern Navarrés salt-wall segments (Prebetic Zone in SE Iberia) were used to constrain their kinematics and driving mechanisms. Paleomagnetic data from Upper Triassic red beds of the selected salt-related structures and from the Miocene rocks belonging to adjacent syn-diapiric half-grabens reveal 15–30° counter-clockwise vertical-axis rotations of the salt-wall rocks and a 20° clockwise rotation of the Jurassic-Miocene cover block located south of the salt-wall. This, together with the salt-wall structure, indicates that the origin of the salt-wall was linked to the motion of a late Miocene thin-skinned extensional fault system, which detached on the Upper Triassic evaporites. Specifically, the salt-wall formed by the south-southwest displacement with a 20° clockwise rotation component of a cover block bounded northwards by the detachment disruptions generated by the motion of pre-existent basement faults. The Upper Triassic detachment level was first affected by a counter-clockwise vertical axis rotation and, during the Paleogene-earliest Miocene building of the Iberian Chain, by tight WNW-trending folds and SSE-directed minor thrusts. This study also shows that Paleomagnetism together with the analysis of the internal structure can successfully depict the geometry and kinematic evolution of complex salt-wall structures. 相似文献
20.
The evolution of the Main Cordillera of Central Chile is characterized by the formation and subsequent inversion of an intra-arc volcano-tectonic basin. The world’s largest porphyry Cu-Mo deposits were emplaced during basin inversion. Statistically, the area is dominated by NE- and NW-striking faults, oblique to the N-striking inverted basin-margin faults and to the axis of Cenozoic magmatism. This structural pattern is interpreted to reflect the architecture of the pre-Andean basement. Stratigraphic correlations, syn-extensional deposits and kinematic criteria on fault surfaces show several arc-oblique structures were active as normal faults at different stages of basin evolution. The geometry of syn-tectonic hydrothermal mineral fibers, in turn, demonstrates that most of these structures were reactivated as strike-slip ± reverse faults during the middle Miocene – early Pliocene. Fault reactivation age is constrained by 40Ar/39Ar dating of hydrothermal minerals deposited during fault slip. The abundance and distribution of these minerals indicates fault-controlled hydrothermal fluid flow was widespread during basin inversion. Fault reactivation occurred under a transpressive regime with E- to ENE-directed shortening, and was concentrated around major plutons and hydrothermal centers. At the margins of the former intra-arc basin, deformation was largely accommodated by reverse faulting, whereas in its central part strike-slip faulting was predominant. 相似文献