共查询到15条相似文献，搜索用时 312 毫秒
1.
本文系统地研究分析了橡胶隔震支座(以下简称为橡胶座)的界限特性和屈曲特性,界限特性的研究包括橡胶座的界限压缩、界限拉伸、界限剪切等特性,屈曲特性研究包括橡胶座的屈曲应力与界限剪切应变的相关特性。基于橡胶座的压缩刚度因子和拉伸刚度因子,给出了计算橡胶座界限压缩和界限拉伸应力的实用计算理论,同时提出了屈曲应力和界限剪切应变的评价方法。针对橡胶座的界限特性和屈曲特性理论,采用天然橡胶和铅芯橡胶座原型试件进行了试验研究,结果表明本文提出的界限压缩、界限拉伸、屈曲应力等计算理论和评价方法是偏于安全的。文末汇总了本研究涵盖的橡胶座压缩、拉伸、回转、剪切和界限等相关特性的研究成果,初步形成了建筑用橡胶座的基础理论体系。 相似文献
2.
橡胶座非线性弹性拉伸特性的理论和试验研究 总被引：4，自引：0，他引：4
本文系统地研究分析了橡胶隔震支座(简称橡胶座)拉伸相关的基础理论,提出了原点拉伸纵弹性模量、拉伸刚度因子、原点拉伸刚度、偏拉原点刚度等基本概念,还提出了计算橡胶座非线性段拉伸刚度的双刚度和原点拉伸刚度应力应变模型等理论。基于原点拉伸刚度和偏拉原点刚度,提出了预测橡胶座的拉伸变形量计算理论。针对新提出的基本概念和计算理论采用低弹性天然橡胶和铅芯橡胶座原型试件进行了试验研究工作,结果表明本文建立的计算理论能够较理想地定量分析橡胶座拉伸相关的刚度和变形特性。 相似文献
3.
橡胶座非线性弹性压缩特性的理论和试验研究 总被引：1，自引：1，他引：1
本文系统地研究分析了与橡胶隔震支座(以下简称为橡胶座)压缩特性有关的基础理论，提出了原点纵向压缩弹性模量、原点压缩刚度、偏压弹性模量、偏压竖向刚度的基本概念，同时还提出了计算剪切变形状态下橡胶座竖向刚度的计算理论。基于纯压缩原点竖向刚度和偏压原点刚度理论，提出了预测橡胶座压缩变形量的计算理论。文中针对新提出的概念和计算理论采用天然橡胶和铅芯橡胶座共计16个原型试件进行了系统的试验研究工作，试验结果表明本文建立的计算理论能够较理想地定量分析橡胶座的刚度和变形特性。 相似文献
4.
采用定参理想集总参数计算体系，以动力基础非线性动力学模型和非线性广义刚度函数的概念为基础，将动力基础模型从竖向非线性振动推广至水平非线性振动、扭转非线性振动以及水平-回转二自由度耦合非线性振动和竖向-水平-回转三自由度非线性耦合振动，建立了动力基础非线性动力学模型的一般表达式，为动力基础非线性设计提供了理论。 相似文献
5.
6.
低硬度橡胶隔震支座基本力学性能及恢复力特性 总被引：4，自引：2，他引：4
本研究对低硬度橡胶隔震支座的材料性能（主要包括力学性能）进行了系统的试验开发及理论研究。研究用低硬度橡胶隔震支座包括天然橡胶隔震支座及铅芯橡胶隔震支座两大类18种规格总计近30个大直径隔震支座。研究内容涉及橡胶隔震支座竖向刚度、水平刚度及阻尼等基本力学性能；压缩界限，屈曲及极限剪切变形等界限性能；温度、压力、剪切变形、老化和徐变等相关性及长期特性；同时还对橡胶材料其他性能进行了系统的试验研究。本文主要介绍低硬度天然橡胶隔震支座及铅芯橡胶隔震支座的基本力学性能，如竖向、水平刚度和恢复力等特性。 相似文献
7.
基于重叠面积法与Haringx理论,得到圆形截面金属橡胶桥梁支座剪切屈服后刚度的计算公式,公式中剪切屈服后刚度与压应力及支座直径成正比,与支座高度成反比,并且存在待求系数α与β。通过大尺寸金属橡胶桥梁支座试件的压缩及压剪试验,获得剪切模量与压缩模量之间的关系,求得系数α约为1.3。参考剪切试验中压应力、支座直径、相对密度和形状系数对支座剪切屈服后刚度的影响规律,给出无量纲系数β的计算公式。根据待求系数α与β,对理论计算公式进行实用性简化,并比较屈服后刚度的理论计算结果与试验结果。结果表明：实用计算公式与试验结果吻合较好,且具有较好的精度,可用于金属橡胶支座压剪状态下屈服后刚度的计算。 相似文献
8.
基于OpenSees平台的钢管混凝土结构力学性能数值模拟 总被引：1，自引：0，他引：1
基于非线性纤维梁-柱单元理论,以OpenSees为求解平台分别进行了钢管混凝土结构滞回曲线计算和弹塑性动力时程分析等数值模拟,计算结果与试验吻合良好。钢管内核心混凝土采用考虑钢管约束效应的应力—应变关系,钢材采用随动强化本构模型。在传统纤维模型法的基础上,通过直接在截面层次定义非线性剪切恢复力的方法建立了考虑非线性剪切效应的剪力墙结构数值模型,结果表明该模型能较好地模拟组合剪力墙的抗剪承载力、捏缩效应以及刚度退化等力学性能。对输入不同地震波下钢管混凝土框架体系的动力时程分析表明,基于OpenSees求解平台的非线性纤维模型法能够较好地模拟钢管混凝土框架结构的非线性动力特性。 相似文献
9.
本研究系统地对低硬度橡胶隔震支座的材料及力学性能进行了试验研究。研究用低硬度橡胶天然及铅芯橡胶隔震支座18种规格总计近30个大直径隔震支座。研究内容涉及低硬度橡胶隔震支座的基本力学性能，温度、压力、剪切变形、老化及徐变等相关性能，压缩界限、拉伸界限、极限剪切变形等界限性能和屈曲特性，以及橡胶材料性能和隔震工程应用等方面。本文主要介绍低硬度橡胶天然及铅芯隔震支座的压缩、拉伸、剪切等界限性能和屈曲应力与剪切应变的相关特性，文中提出了基于刚度因子建立的橡胶支座的界限压缩和界限拉伸应力评价方程，同时还给出了剪切变形状态下的屈曲应力评价方法。 相似文献
10.
方形多铅芯橡胶支座力学性能研究 总被引：7，自引：0，他引：7
本文通过对方形多铅芯橡胶支座竖向压缩性能试验,水平剪切性能试验以及其等效刚度、屈服强度、屈服后刚度、等效阻尼比等水平特征参数与水平剪切应变和竖向压应力的关系,特别是对其在不同方向上压缩剪切变形状态下的性能试验,分析了这种隔震支座各种水平特征参数在不同方向上变化的相关规律。得出在这种类型橡胶隔震支座在双向水平荷载同时作用下,竖向性能和水平性能较为稳定,是较为理想的桥梁结构的减隔震装置。 相似文献
11.
12.
低硬度橡胶隔震支座各种相关性及老化徐变特性 总被引：4，自引：1，他引：4
作者系统地对低硬度橡胶隔震支座的材料和力学性能进行了试验研究。研究使用的低硬度橡胶隔震支座分18种规格，总计近30个大直径隔震支座。研究内容涉及低硬度橡胶隔震支座的基本力学性能；温度、压力、剪切变形、老化和徐变等相关性；压缩界限，屈曲及极限剪切变形等界限性能以及橡胶材料性能和隔震工程应用等方面。本文主要介绍低硬度橡胶隔震支座的压力、剪切变形、温度对支座刚度、阻尼等力学性能的影响，同时还对隔震支座的老化及徐变特性进行了试验研究，确定低硬度橡胶使用60年后的力学性能变化率。文中同时提出了低硬度橡胶支座的温度修正方程，并提出了隔震结构地震反应分析时支座刚度和屈服荷载变化的取值范围。 相似文献
13.
Comparison of fundamental properties of new types of fiber‐mesh‐reinforced seismic isolators with conventional isolators 
下载免费PDF全文
下载免费PDF全文 New types of fiber‐reinforced rubber‐based seismic isolators have been a research interest for a number of engineers in the past decade. These new types of isolators can have similar seismic performances compared with the conventional ones. In most of the previous researches, the fiber‐reinforced rubber‐based isolators is usually manufactured with placing fiber sheets between precut rubber layers with the use of a bonding agent. This research differs from the previous researches in terms of manufacturing process, use of fiber mesh instead of fiber sheets, and use of lead in the core for some of the bearings. The aim of this research is to provide comparisons in fundamental seismic response properties of the new type of fiber mesh reinforced isolators and conventional isolators. In this scope, four pairs of fiber mesh reinforced elastomeric bearings and four pairs of steel‐reinforced elastomeric bearings are subjected to various levels of compression stresses and cyclic shear strains under constant vertical pressure. The tested types of isolators are fiber mesh reinforced elastomeric bearing, fiber mesh reinforced elastomeric bearing with lead core, steel‐reinforced elastomeric bearings, and steel‐reinforced elastomeric bearings with lead core. In this research, steel‐reinforced bearings are called conventional isolators. The major advantage for fiber mesh reinforced bearings observed during the tests is that these isolators can develop a considerable low horizontal stiffness compared with the conventional isolators. The damping characteristics of the new and conventional types are similar to each other. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
14.
The effects of damping in various laminated rubber bearings (LRB) on the seismic response of a ?‐scale isolated test structure are investigated by shaking table tests and seismic response analyses. A series of shaking table tests of the structure were performed for a fixed base design and for a base isolation design. Two different types of LRB were used: natural rubber bearings (NRB) and lead rubber bearings (LLRB). Three different designs for the LLRB were tested; each design had a different diameter of lead plug, and thus, different damping values. Artificial time histories of peak ground acceleration 0.4g were used in both the tests and the analyses. In both shaking table tests and analyses, as expected, the acceleration responses of the seismically isolated test structure were considerably reduced. However, the shear displacement at the isolators was increased. To reduce the shear displacement in the isolators, the diameter of the lead plug in the LLRB had to be enlarged to increase isolator damping by more than 24%. This caused the isolator stiffness to increase, and resulted in amplifying the floor acceleration response spectra of the isolated test structure in the higher frequency ranges with a monotonic reduction of isolator shear displacement. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
15.
Huma Kanta Mishra Akira Igarashi Hiroshi Matsushima 《Bulletin of Earthquake Engineering》2013,11(2):687-707
A new base isolation system using scrap tire rubber pads (STRP) has been introduced for seismic mitigation of ordinary residential buildings. The rubber and the steel reinforcing cords used in manufacturing the tire are the alternative materials of the proposed base isolation system. The steel reinforcing cords represent the steel plates used in conventional laminated rubber bearings. These steel reinforcing cords shall prevent the lateral bulging of the rubber bearing. The proposed base isolation system has no bonding between the superstructure and the foundation beam which allows for rollover deformation. In the first part of the study, the STRP layers were just stacked one on top of another without applying the adhesive. This paper presents loading test as well as finite element analysis (FE analysis) of strip STRP isolators that are subjected to any given combination of static vertical and lateral loads. The results of the static vertical and horizontal loading test conducted on STRP isolators were used to calculate the mechanical properties of the isolators, including stiffness and damping values. The load–displacement relationship of STRP isolators were compared between experimental and FE analysis results and the results were found to be in close agreement. The stress state within the STRP isolators was also analyzed in order to estimate the maximum stress demand in the rubber and steel reinforcing cords. These STRP isolators have several advantages over conventional laminated rubber bearings including superior damping properties, lower incurred cost, light weight and easily available material. This study suggests that using the STRP as low cost base isolation device for ordinary residential buildings is feasible. 相似文献