共查询到20条相似文献，搜索用时 203 毫秒
1.
The present study is employing the equivalent irregular wave approach to predict the wave loads for a ship encountering the worst sea state with respect to the critical dynamic loading parameter. Two different hydrodynamic numerical models, i.e. 3D pulsating source technique and 3D translating pulsating source technique, are applied to calculate the corresponding RAO of the ship moving in waves. Incorporating the RAO of the related physical properties, we can calculate the extreme value for the corresponding ship loading factor, which can be regarded as the worst sea state in the service lifetime of the ship. With the time and period of the occurrence of the corresponding extreme value, we can simulate the time history of the wave load in this period, which is so-called equivalent irregular wave approach. Comparing with the results calculated by the traditional equivalent regular wave approach, we find that the equivalent irregular wave approach can simulate the corresponding wave load more realistic, especially for dynamic pressure. Using the equivalent irregular wave approach can offer the effective and practical base for the ship structural analysis. 相似文献
2.
Experimental Investigation of Irregular Wave Uplift Force on Deck of Exposed High-Pile Jetties 总被引：1，自引：0，他引：1
A laboratory setup was developed to investigate irregular wave uplift loads on exposed high-pile jetties.It is shown that the dimensionless uplift load increases to the maximum with an increasing relative clearance and then decreases.The relative clearance corresponding to the peak force is linked to a range from 0.4 to 0.8.When the relative clearance exceeds a certain value,the wave can not reach the underside of the deck and the force becomes zero.Distinct trends of dimensionless force with a relative width of deck show that the force tends to decrease as the relative deck width increases,and then the decrease slows down after the relative deck width increases or decreases to a certain value.The pressure distribution length associated with the maximum uplift force is equivalent to the wave contact width x.When x is larger than the width of deck B,it is taken as B.The statistical distribution of loads obeys the Weibull distribution.The results from the analyses of the real data suggest a new dimensionless prediction model on wave-in-deck uplift loads and the conversion ratio between wave loads at different exceedance probabilities.A comparison is made between the new prediction model and the existing widely used three prediction models.These results are used as useful references for structural design of the jetty. 相似文献
3.
基于线性势流假定,对斜向波作用下带横隔板局部开孔沉箱防波堤的水平波浪力进行了理论研究。给出了开孔沉箱法向水平力和横隔板受力的理论计算方法,在极限情况下波浪力的计算结果与文献中的已有结果一致。利用数值算例分析了开孔沉箱总水平力的主要影响因素。开孔沉箱法向总水平力的减小主要集中于结构上半部分波浪影响范围以内。增加单个开孔沉箱的长度有利于减小结构所受总水平波浪力。当波浪入射角或沉箱前开孔墙孔隙影响系数幅值较大时,开孔沉箱横隔板上总水平力的最大值要超过相应的沉箱法向总水平力,此时要注意横隔板的强度问题。 相似文献
4.
人工柔性植被场中波浪衰减特性研究 总被引：2，自引：0，他引：2
通过SWAN-VEG模型对波浪在刚性及柔性植被中传播的模拟计算结果发现,SWAN-VEG模型能较好的模拟刚性植被场对波能衰减的特性,而对于柔性植被场的情况,则缺少合适的对阻力系数的估算方法。因而在传统的植被消浪模型的基础上,通过引入有阻尼的受迫振荡模型,来考虑柔性植被在不同入射波浪作用下的晃动效果,引入柔性植物体在波浪力下的避让因子D(D为植物运动速度与水质点流速的相对值),通过转换关系式来反映植被的柔性对阻力系数CD影响。对未考虑植被晃动的SWAN-VEG模型进行了修改,用于模拟计算波浪在柔性植被场中的衰减,并采用人工柔性材料进行物理模型试验对计算结果进行对比验证。结果表明,考虑植被晃动影响的模拟结果明显好于不计植被晃动影响的情况,验证结果的相关系数从0.68提高至0.83。由此说明在进行柔性植物消浪效果的研究中需考虑柔性植被的晃动效应,同时发现植被晃动效果的强弱与植物材质的固有频率ωn、阻尼比γ、植被高度hv以及入射波要素等因素有关。 相似文献
5.
海底沉积物纵波波速与物理-力学性质的理论关系和比较 总被引：3，自引：1，他引：2
本文提出以密度变化比和等效弹性模量变化比为参数描述海底沉积物纵波波速,得到密度变化比是由孔隙率、海水密度和海底沉积物固相密度构成的复合参数,建立了以复合参数和等效弹性模量变化比为变量的泰勒多项式海底沉积物纵波波速公式。基于单因素分析法得出纵波波速可表示为参考声速与调制函数的乘积,沉积物的参考声速由海底底质物理性质确定,建立了复合参数-声速的近似理论模型。对该理论模型与现有的主要纵波波速经验公式的分析结果表明,孔隙率-纵波波速经验公式只是参考声速不同,但调制函数是互相等效的,验证了本文海底沉积物纵波波速理论关系的有效性。 相似文献
6.
基于物理模型试验,考虑畸形波参数、相对板宽、相对波高等影响因素,就畸形波对平顶双层水平板防波堤作用进行研究。首先对畸形波作用下双层水平板的波浪力分布特征进行了讨论,然后就最大波动压强、结构最大总垂向力与不规则波作用进行了对比分析。结果表明,畸形波作用下,双层水平板最大波动压力出现在前端迎浪区域附近,向尾端逐渐递减。双层水平板4个受力面的压力分布不同且有相位差,4个受力面的最大波动压力时间差约在0.1Tp~0.4Tp范围内变化。与不规则波作用比较,畸形波作用没有显著改变波压包络分布特征,但增大了波压包络强度值。试验范围内,就最大总力而言,两者最大总浮托力比值在1.06~2.45间变化;向下的最大总垂向力比值在1.22~2.07之间变化;就波动压力而言,其增大的幅度与畸形波参数α1相关性最强,随α1的增大而增大,在α1=2.04~3.1试验范围内,畸形波作用时的最大压强比不规则波作用时可约增大20%~80%。就最大波吸力而言,两者的比值与畸形波参数α4相关性最强,随α4的增大而减小。在α4=0.62~0.75试验范围内,最大波吸力强度的比值在1.61~0.87范围内变化。当α4≤0.72时,畸形波作用时的最大波吸力大于不规则波作用时的最大波吸力;当α4 > 0.72时则刚好相反。 相似文献
7.
海浪对ASCAT散射计反演风场的影响研究 总被引：1，自引：1，他引：0
To improve retrieval accuracy, this paper studies wave effects on retrieved wind field from a scatterometer. First, the advanced scatterometer(ASCAT) data and buoy data of the National Data Buoy Center(NDBC) are collocated. Buoy wind speed is converted into neutral wind at 10 m height. Then, ASCAT data are compared with the buoy data for the wind speed and direction. Subsequently, the errors between the ASCAT and the buoy wind as a function of each wave parameter are used to analyze the wave effects. Wave parameters include dominant wave period(dpd), significant wave height(swh), average wave period(apd) and the angle between the dominant wave direction(dwd) and the wind direction. Collocated data are divided into sub-datasets according to the different intervals of each wave parameter. A root mean square error(RMSE) for the wind speed and a mean absolute error(MAE) for the wind direction are calculated from the sub-datasets, which are considered as the function of wave parameters. Finally, optimal wave conditions on wind retrieved from the ASCAT are determined based on the error analyses. The results show the ocean wave parameters have correlative relationships with the RMSE of the retrieved wind speed and the MAE of the retrieved wind direction. The optimal wave conditions are presented in terms of dpd, swh, apd and angle. 相似文献
8.
Kern E. Kenyon 《Journal of Oceanography》2004,60(6):1045-1052
Freely propagating surface gravity waves are observed to slow down and to stop at a beach when the bottom has a relatively gentle upward slope toward the shore and the frequency range of the waves covers the most energetic wind waves (sea and swell). Essentially no wave reflection can be seen and the measured reflected energy is very small compared to that transmitted shoreward. One consequence of this is that the flux of the wave’s linear momentum decreases in the direction of wave propagation, which is equivalent to a time rate of change of the momentum. It takes a force to cause the time rate of change of the momentum. Therefore, the bottom exerts a force on the waves in order to decrease the momentum flux. By Newton’s third law (action equals reaction) the waves then impart an equal but opposite force to the bottom. In shallow (but finite) water depths the wave force per unit bottom area is calculated, for normal angle of incidence to the beach, to be directly proportional to the square of the wave amplitude and to the bottom slope and inversely proportional to the mean depth; it is independent of the wave frequency. Constants of proportionality are: 1/4, the fluid density and the acceleration of gravity. Swell attenuation near coasts and some characteristics of sand movement in the near-shore region are not inconsistent with the algebraic structure of the wave force formula. Since the force has a depth variation which is significantly faster than that of the dimensions of the particle orbits in the vertical direction, the bottom induces a torque on the fluid particles that decreases the angular momentum flux of the waves. By an extension of Newton’s third law, the waves also exert an equal but opposite torque on the bottom. And because the bottom force on the waves exists over a horizontal distance, it does work on the waves and decreases their energy flux. Thus, theoretically, the fluxes of energy, angular and linear momentum are not conserved for shoaling surface gravity waves. Mass flux, associated with the Stokes drift, is assumed to be conserved, and the wave frequency is constant for a steady medium. 相似文献
9.
A new method of treating maximum wave height as a random variable in reliability analysis of breakwater caissons is proposed. The maximum wave height is expressed as the significant wave height multiplied by the so-called wave height ratio. The proposed wave height ratio is a type of transfer function from the significant wave height to the maximum wave height. Under the condition of a breaking wave, the ratio is intrinsically nonlinear. Therefore, the probability density function for the variable cannot be easily defined. In this study, however, it can be derived from the relationship between the maximum and significant waves in a nonbreaking environment. Some examples are shown to validate the derived probability density function for the wave ratio parameter. By introducing the wave height ratio into reliability analysis of caisson breakwater, the maximum wave height can be used as an independent and primary random variable, which means that the risk of caisson failure during its lifetime can be evaluated realistically. 相似文献
10.
Dong Hyawn KIM Taerim KIM 《中国海洋工程》2014,28(5):579-586
A new method of treating maximum wave height as a random variable in reliability analysis of breakwater caissons is proposed. The maximum wave height is expressed as the significant wave height multiplied by the so-called wave height ratio.The proposed wave height ratio is a type of transfer function from the significant wave height to the maximum wave height.Under the condition of a breaking wave, the ratio is intrinsically nonlinear. Therefore, the probability density function for the 相似文献
11.
基于拟层流风波生成机制的海浪谱模型 总被引：1，自引：0，他引：1
海浪谱的能量可以视为由具有不同相速度的谐波携带的能量所组成。基于对风波形成、发展过程的认识,认为各组成谐波的能量由谐波自平均风摄取而来,由此根据拟层流模型推导出谐波能量密度的计算公式,建立以等效风速和峰值频率等为基本参数的海浪谱模型——随机Fourier函数模型,并给出了确定谐波频率、波长、相速度、振幅以及等效风速等模型参数的原则和计算方法。在59个实测样本谱基础上,采用随机建模方法确定模型参数的取值及其概率分布。结果表明,海浪谱模型可以很好地预测谱能,所计算的物理谱与实测谱均值吻合良好。 相似文献
12.
底部透空不透水建筑物是近海工程中的一种新型结构,与传统水工建筑物相比,其能灵活适应基床不发生变形、阻止波浪进入后方造成破坏。本文通过构建物理模型,在波浪水槽中进行试验,测试了底部透空不透水直立建筑物不规则波作用,得到了不同水深、相同波浪要素时,该型直立建筑物迎浪面和底面的水平总力最大时各测点正向波压力和负向波压力数据。对比分析了不同水深下底部透空不透水直立建筑物的水平总力及垂直力,总结了波峰和波谷作用下波浪力沿建筑物表面的分布规律,可为海岸工程结构设计提供依据。 相似文献
13.
Cheng-Han Tsai Min-Chih Huang Fu-Ji Young Yin-Chern Lin Hsien-Wen Li 《Ocean Engineering》2005,32(10):4936-1259
Except the commonly selected pressure transfer function derived from the linear wave theory, a previous study on the pressure transfer function for recovering surface wave from underwater pressure transducer suggested that the pressure transfer function is a function of frequency parameter only. With careful analysis, this study showed that the pressure transfer function should include a transducer submergence parameter as that given by the linear theory. It was found that the previously suggested empirical formula should be restricted to measurements with the pressure transducer close to the surface; otherwise overestimation of wave height would result. Field measurements were carried out with an acoustic wave gauge and a synchronized pressure transducer located at various depths with submergence parameter close to 1 (near the sea floor). It was shown that the previous one-parameter empirical formula might overestimate the significant wave height by more than 30%. This study found that with deep-water wave bursts excluded, the transfer function based on the linear wave theory provided a fairly good estimation on the significant wave heights, with an average deviation of 3.6%. 相似文献
14.
近岸植物带能有效削弱波浪作用,植物带消浪影响因素分析对布置护岸工程、维护岸线稳定有重要意义。在模型实验基础上,探究相对波高、模型相对宽度、模型相对高度和体积分数对透射系数的影响。设置波浪水槽试验,研究孤立波在不同水深、入射波高及植物排布方式等组合条件下对植物消浪效果的影响。采用遗传编程法得出各复杂度下的透射系数计算公式,并分析各参数在方程中的表现情况,发现遗传编程能定性给出参数的敏感度。相比于非线性回归拟合结果,遗传编程方法得到的函数关系更加精确。采用人工神经网络方法进一步分析与验证各影响因素对植物消浪效果的影响程度,结果表明人工神经网络得出的结果与遗传编程方法相近,体积分数对消浪效果起主导作用。 相似文献
15.
Analysis of Wave Loads on A Semi-Submersible Platform 总被引：10，自引：0，他引：10
For the global and structural fatigue strength analysis of a semi-submersible platform, wave loads under design conditions are calculated by use of the three-dimensional boundary element method. Methods for calculating the forward-speed free-surface Green function are discussed and a computer program with this Green function is developed. According to the special rules, the wave loads under several typical design conditions of the platform are calculated. The maximum vertical bending moment, torsion moment and horizontal split force are determined from a series of contour maps of wave loads for the wave period of 5 to 18 seconds at a certain interval and the wave phase of 0°to 360°at a certain interval. The wave height is determined by the function of wave period with a given exceedance probability. The maximum wave loads under the combination of wave parameters are used as the input of hydrodynamic pressure in the three-dimensional finite element analysis process. The transfer functions of wave loads 相似文献
16.
圆柱形沉浮式深海养殖网箱的受力分析 总被引：9，自引：0，他引：9
应用一系列力学关系，研究了深海圆柱形沉浮式养殖网箱所承受的波浪力情况。导出深海沉浮式养殖网箱的运动方程，并给出数值计算。在网箱波浪力的研究中采用绕射理论和Morison方程，讨论了在波高、波长及周期变化下水动力的变化趋势，得出网箱所受到的水平波浪力远大于竖直波浪力，波高的变化对波浪力的影响最大的结论，为深海网箱的设计校核提供1种参考方法。 相似文献
17.
以方形立柱作为研究对象，对其在聚焦波作用下的波浪力特性进行研究。研究主要基于计算流体力学数值方法，对聚焦波作用下方形立柱在固定、单自由度纵荡、单自由度垂荡三种运动状态下所受波浪力进行研究。利用phase-inversion逆相位分解方法对其高阶力特性进行分析。首先对聚焦波生成方法、数值计算方法与参数设置进行简要介绍，其次展示了三种运动状态下立柱在聚焦波作用下所受波浪力，并对其进行分析，最后利用phase-inversion逆相位分解方法获得高阶波浪力成分并对其载荷特性进行分析讨论。研究发现逆相位分解方法可以有效分离波浪力高阶成分，不同运动状态下立柱所受波浪力会有显著不同。 相似文献
18.
Surface waves are the roughness element of the ocean surface. The parameterization of the drag coefficient of the ocean surface is simplified by referencing to wind speed at an elevation proportional to the characteristic wavelength. The dynamic roughness is analytically related to the drag coefficient. Under the assumption of fetch limited wave growth condition, various empirical functions of the dynamic roughness can be converted to equivalent expressions for comparison. For datasets covering a wide range of the dimensionless frequency (inverse wave age), it is important to account for the variable rate of wave development at different wave ages. As a result, the dependence of the Charnock parameter on wave age is nonmonotonic. Finally, the analysis presented here suggests that the significant wave steepness is a sensitive property of the ocean surface and a single variable normalization of the dynamic roughness using a wavelength or wave height parameter actually produces more robust functions than bi-variable normalizations using wave height and wave slope. 相似文献
19.
20.
The paper considers the effects of sea roughness and atmospheric stability on the wind wave growth by using the logarithmic boundary layer profile including a stability function, as well as adopting Toba et al.'s [J. Phys. Ocean. 34 (1990) 705] significant wave height formula combined with some commonly used sea surface roughness formulations. The wind wave growth is represented by the non-dimensional total wave energy relative to that for neutral stability used by Young [Coast. Engng 34 (1998) 23]. For a given velocity at the 10 m elevation, spectral peak period and stability parameter, the wind wave growth is determined. 相似文献