首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 773 毫秒
1.
利用叠前地震数据预测裂缝储层的应用研究   总被引:1,自引:6,他引:1       下载免费PDF全文
叠前地震资料储层预测技术是在Zoeppritz方程基础上发展起来的,通过处理地震数据随着不同入射角地震反射属性,得到地震属性随着入射角变化而改变,研究分析得到反映岩性变化的纵波速度、横波速度、泊松比和截距与梯度剖面,预测裂缝储层的发育及分布.同时根据不同方位角地震资料属性,计算得到不同方位角目的层的属性差异,使用各向异性椭圆公式作拟合,求出背景趋势A和各向异性因子B,利用最大振幅包络方位和对应θ,求出裂缝发育优势方向,及B/A各向异性因子,实现对裂缝储层预测.  相似文献   

2.
利用地震数据较为准确地预测地下介质的裂缝发育信息,是裂缝型储层预测的关键手段,也是非常规页岩油气储层压裂改造的关键参数.方位AVO(AVAZ)在描述HTI介质的裂缝分布及发育方向等方面有重要应用,本文提供一种基于全方位地震数据的方位AVO(AVAZ)反演方法,为裂缝预测提供参考资料.首先利用Ruger近似方程正演计算不同方位角及入射角下的反射系数,继而与方位角度道集中地震反射振幅建立目标函数,然后基于正演方程及目标函数采用最小二乘法进行AVAZ反演.实现了从全方位地震资料中同步反演纵波反射系数、各向同性梯度、各向异性梯度及裂缝发育方向.模型数据和实际地震资料应用表明该方法能够有效的预测HTI介质的裂缝分布及方向.  相似文献   

3.
常用的叠前裂缝预测方法并不能明确区分不同尺度的裂缝,本文研究并提出基于裂缝密度的大、中尺度裂缝定量预测方法。该方法通过基于Curvelet变换的多方向相干分析技术进行大尺度裂缝(大于1/4波长)预测,通过地震方位各向异性方法和叠前衰减地震属性(如频率衰减梯度)进行中尺度裂缝(1/4~1/100波长)预测,然后将得到的两种不同尺度裂缝的发育强度以裂缝密度为基准进行融合,综合地评价不同尺度裂缝。将该方法运用到裂缝储层地震物理模型中,结果表明,该方法不但克服了叠前衰减属性的方位各向异性预测中尺度裂缝的同时,预测出断层和大尺度裂缝的密度分布不连续的问题,还能对裂缝的尺度进行区分,较准确的定量预测裂缝发育带。  相似文献   

4.
塔中北坡顺南地区奥陶系碳酸盐岩具有良好的勘探开发前景,近期在多个层系钻遇了储层和油气.研究显示该地区裂缝比较发育,并对储层的形成和改造起到了非常关键的作用,但目前针对该区的裂缝预测技术研究成果较少,以叠后属性评价为主.因此,本文从裂缝实际地质特征观察出发,基于叠前地震资料,综合多种方法进行裂缝预测.首先利用叠前构造应力场反演间接评价裂缝的发育密度和方向,基于评价结果对地震叠前数据进行不同方位划分方案的资料处理并对比,使用纵波方位各向异性方法预测储层裂缝发育方向与相对密度.多方法结合的预测结果符合研究区裂缝发育规律并与地质模式相吻合,通过与岩心及成像测井资料对比,验证了该地区使用较窄方位采集的地震数据进行裂缝预测结果的有效性.  相似文献   

5.
裂缝作为油气的重要运移通道,同时可以显著改善致密储层的孔渗特性,因此预测裂缝的发育对于寻找天然气聚集的地质甜点及致密储层压裂施工改造的工程甜点具有非常关键的指导作用.基于叠前纵波地震资料的方位各向异性特性进行裂缝预测技术,由于受多种因素影响裂缝方位与纵波反射系数的关系异常复杂,因此需要通过岩石物理正演模拟实验以及成像测井资料来确定二者之间关系.在此基础上针对鄂尔多斯盆地X区块的致密砂岩储层,利用裂缝相对密度半定量化研究技术,成功预测了X区块的致密砂岩储层的裂缝发育的密度.通过电阻率成像测井、钻井岩心资料及后续压裂试采情况验证表明:高角度高导裂缝与叠前裂缝预测成果吻合度较高,预测精度能够满足勘探开发生产需求,证明该技术在X区块具有实际的应用价值.  相似文献   

6.
转换波方位各向异性裂缝检测技术研究及应用   总被引:1,自引:0,他引:1  
HTI裂缝各向异性介质中,转换波随方位角的变化比较复杂,目前还没有解析公式可以表达其变化特征,只能通过物理实验或数值模拟来分析其应用的可能性.数值模拟结果表明,转换波在裂缝各向异性介质中传播时,其R分量和T分量的振幅属性都具有明显的方位各向异性特征,R分量振幅方位各向异性拟合椭圆的长轴方向指示裂缝方位,这与纵波方位各向异性特征相似;根据P波AVAZ方位各向异性分析原理,对转换波R分量振幅方位各向异性曲线进行方位椭圆拟合,寻找椭圆的长轴方向,即裂缝主方位,再由P波AVAZ技术中振幅响应与炮检方向和裂缝走向之间的夹角关系式得到裂缝的发育密度,从而构建转换波方位各向异性AVAZ裂缝检测技术.该技术已用于川西新场气田某区块的裂缝储层预测,取得了较好的应用效果.  相似文献   

7.
对于裂缝型油气藏,基于叠前方位角地震数据体,利用AVAZ方法进行裂缝属性预测是目前较为有效的裂缝描述手段,然而,由于地震数据通常为窄方位采集,使得不同方位角数据覆盖次数差异较大,导致各方位振幅能量分布不均,最终造成裂缝属性预测中产生趋势性误差。振幅归一化处理技术应用到现有的AVAZ方法中,该方法能够有效地降低因数据采集所造成的趋势性误差,预测结果会更为真实、可靠。在实际油田的应用中,振幅归一化技术显著改善了AVAZ方法对裂缝属性预测的准确性,取得了较好的效果。   相似文献   

8.
裂缝油气藏在油气勘探开发中占有重要地位,准确地预测储层中的裂缝发育程度等参数是勘探开发中的难点.本文采用叠后多属性分析技术对哈山西地区的石炭系火山岩裂缝密度进行了定量预测:在储层特征分析的基础上,首先提取了对裂缝发育反映较好的多种地震属性,包括相干体、倾角方位角、曲率、蚂蚁体、弧长、瞬时频率、均方根振幅、反射强度、道微分、吸收衰减属性,并对提取的属性进行了敏感性分析.在此基础上,利用BP神经网络的方法,对裂缝密度进行了定量预测,预测结果与工区钻井资料吻合,为下步的勘探开发提供了依据.  相似文献   

9.
杨税务潜山位于廊固凹陷北部,为一呈北东向展布多断块构成的潜山带,油气资源丰富,由于其埋藏深、裂缝-孔隙-岩溶储层交织,各向异性、非均质性较强,使得有效储层难以分辨识别、油藏分布复杂,选点部井较难.本文在充分分析沉积储层特征及油藏主控因素等基础上,选择有利岩性储层发育段,利用叠前逆时偏移和井控拓频等技术,进行高分辨率及内幕信息丰富剖面处理;利用叠前方位道集属性、分频相干和体曲率属性等技术方法,进行裂缝+孔洞复合型储层识别预测;利用AVO属性及地震频率梯度等组合技术进行储层含油气检测,实现了研究区有效储层油气甜点分布预测,其预测成果有效指导了安探1X、安探3X等工业油流井的部署,实践证明,该套组合技术方法简单、有效实用,适用于深潜山及内幕的有效储层地震预测,对类似区带或构造的有效储层地震预测具有指导意义.  相似文献   

10.
由于裂缝及所含流体的综合作用,含裂缝介质不仅具有速度各向异性,还具有显著的衰减各向异性。衰减各向异性分析可应用于裂缝产状、裂缝密度和尺度等的估计,为储层识别提供重要信息。本文从理论上推导了ATI介质(对称轴沿任意方向的横向各向同性介质)中P波衰减各向异性关系,并据此改进了ATI介质中P波衰减各向异性的测量方法,避免了现有的基于泰勒展开改进的谱比法在应用于宽方位或全方位数据时误差较大的问题,同时基于P波衰减各向异性分析可对裂缝倾角和方位角进行初步估计。结合P波衰减各向异性分析和S波速度各向异性分析,可实现小尺度裂缝的裂缝密度和裂缝尺度联合反演,相比于单独使用横波速度各向异性分析方法或单独使用P波衰减各向异性分析方法,其反演结果更准确、收敛性更好。本文将衰减各向异性分析应用于中国东部某油田的微地震数据,通过衰减倾向各向异性分析提取的裂缝倾角,与微地震监测结果相符。  相似文献   

11.
Knowledge about the spatial distribution of the fracture density and the azimuthal fracture orientation can greatly help in optimizing production from fractured reservoirs. Frequency-dependent seismic velocity and attenuation anisotropy data contain information about the fractures present in the reservoir. In this study, we use the measurements of velocity and attenuation anisotropy data corresponding to different seismic frequencies and azimuths to infer information about the multiple fracture sets present in the reservoir. We consider a reservoir model with two sets of vertical fractures characterized by unknown azimuthal fracture orientations and fracture densities. Frequency-dependent seismic velocity and attenuation anisotropy data is computed using the effective viscoelastic stiffness tensor and solving the Christoffel equation. A Bayesian inversion method is then applied to measurements of velocity and attenuation anisotropy data corresponding to different seismic frequencies and azimuth to estimate the azimuthal fracture orientations and the fracture densities, as well as their uncertainties. Our numerical examples suggest that velocity anisotropy data alone cannot recover the unknown fracture parameters. However, an improved estimation of the unknown fracture parameters can be obtained by joint inversion of velocity and attenuation anisotropy data.  相似文献   

12.
Common prestack fracture prediction methods cannot clearly distinguish multiplescale fractures. In this study, we propose a prediction method for macro- and mesoscale fractures based on fracture density distribution in reservoirs. First, we detect the macroscale fractures (larger than 1/4 wavelength) using the multidirectional coherence technique that is based on the curvelet transform and the mesoscale fractures (1/4–1/100 wavelength) using the seismic azimuthal anisotropy technique and prestack attenuation attributes, e.g., frequency attenuation gradient. Then, we combine the obtained fracture density distributions into a map and evaluate the variably scaled fractures. Application of the method to a seismic physical model of a fractured reservoir shows that the method overcomes the problem of discontinuous fracture density distribution generated by the prestack seismic azimuthal anisotropy method, distinguishes the fracture scales, and identifies the fractured zones accurately.  相似文献   

13.
The propagation of seismic waves through a saturated reservoir compresses the fluid in the pore spaces. During this transition, parts of seismic energy would be attenuated because of intrinsic absorption. Rock physics models make the bridge between the seismic properties and petrophysical reality in the earth. Attenuation is one of the significant seismic attributes used to describe the fluid behaviour in the reservoirs. We examined the core samples using ultrasonic experiments at the reservoir conditions. Given the rock properties of the carbonate reservoir and experiment results, the patchy saturation mechanism was solved for substituted fluid using the theory of modulus frequency. The extracted relationship between the seismic attenuation and water saturation was used in time–frequency analysis. We performed the peak frequency method to estimate the Q factor in the Gabor domain and determined the water saturation based on the computed rock physics model. The results showed how the probable fault in the reservoir has stopped the fluid movement in the reservoir and caused touching the water‐bearing zone through drilling.  相似文献   

14.
Understanding fracture orientations is important for optimal field development of fractured reservoirs because fractures can act as conduits for fluid flow. This is especially true for unconventional reservoirs (e.g., tight gas sands and shale gas). Using walkaround Vertical Seismic Profiling (VSP) technology presents a unique opportunity to identify seismic azimuthal anisotropy for use in mapping potential fracture zones and their orientation around a borehole. Saudi Aramco recently completed the acquisition, processing and analysis of a walkaround VSP survey through an unconventional tight gas sand reservoir to help characterize fractures. In this paper, we present the results of the seismic azimuthal anisotropy analysis using seismic traveltime, shear‐wave splitting and amplitude attenuation. The azimuthal anisotropy results are compared to the fracture orientations derived from dipole sonic and image logs. The image log interpretation suggests that an orthorhombic fracture system is present. VSP data show that the P‐wave traveltime anisotropy direction is NE to SW. This is consistent with the cemented fractures from the image log interpretation. The seismic amplitude attenuation anisotropy direction is NW to SE. This is consistent with one of the two orientations obtained using transverse to radial amplitude ratio analysis, with the dipole sonic and with open fracture directions interpreted from image log data.  相似文献   

15.
16.
裂隙型单斜介质中多方位地面三分量记录模拟   总被引:23,自引:3,他引:20       下载免费PDF全文
针对裂隙型储集层中更具代表性的各向异性介质模型,即在各向同性背景介质中含有两组斜交的垂直裂隙所构成的单斜各向异性介质模型,利用时间和空间上可达任意阶的高阶交错网格有限差分技术,对具有不同裂隙填充物性质的单斜介质中波的传播快照进行了模拟.结果证实各向异性介质中波的传播速度随传播方向的不同而产生明显的差异;裂隙填充物的性质对于速度各向异性具有很大的影响.另外,利用坐标旋转法,对水平层状各向异性介质中多方位地面三分量记录进行了模拟,结果表明了方位各向异性介质中,波的传播速度不仅随入射角的变化而变化,同时也随观测方位的不同而产生差异.数值模拟结果为进一步利用地面多方位地震属性进行各向异性参数的反演及裂隙参数的描述提供理论基础.  相似文献   

17.
Seismic data with high signal-to-noise ratios (SNRs) are useful in reservoirexploration. To obtain high SNR seismic data, significant effort is required to achieve noiseattenuation in seismic data processing, which is costly in materials, and human and financialresources. We introduce a method for improving the SNR of seismic data. The SNR iscalculated by using the frequency domain method. Furthermore, we optimize and discussthe critical parameters and calculation procedure. We applied the proposed method on realdata and found that the SNR is high in the seismic marker and low in the fracture zone.Consequently, this can be used to extract detailed information about fracture zones that areinferred bv structural analysis but not observed in conventional seismic data.  相似文献   

18.
碳酸盐岩储集层已成为世界石油新发现储量的重要组成部分,识别该类储层对地震数据的信噪比、分辨率以及成像精度提出了更高的要求.本文从地震低频信号缺失的问题出发,首先研究了低频信号缺失对子波、合成地震记录和波阻抗反演的影响,其次分析了深层碳酸盐岩裂缝储层中弱信号低频缺失的特征.针对低频信号缺失问题,本文利用压缩感知理论,并结合反射系数的稀疏特性,提出了自适应计算L1范数权重因子的方法,同时构建了改进的宽带俞式低通整形滤波器,在不影响地震高频信号的同时对地震弱信号进行低频补偿.结果表明,缺失低频信号,会使子波旁瓣变大,合成记录出现假同相轴,厚层波阻抗反演畸变,深层碳酸盐岩裂缝储层弱信号难以识别;而本文方法有效地补偿了深层碳酸盐岩裂缝储层弱信号10Hz以下的频率成分,使得波组反射特征更加清晰,深层弱信号成像质量得到改善,为进一步有效识别深层碳酸盐岩裂缝储层建立了基础.  相似文献   

19.
The main issue of seismic attenuation characterizing method based on time–frequency analyzing method is the time–frequency resolution. The adaptive optimal-kernel time–frequency representation, which has high time–frequency resolution comparing with commonly used time–frequency analyzing method, is investigated. The seismic attenuation qualitative characterizing method based on adaptive optimal-kernel time–frequency representation is proposed. The synthetic data example and 3D field-data example reveal that the proposed method can qualitatively characterize seismic attenuation, and the attenuated anomaly of this field-data example coincides with gas reservoir well.  相似文献   

20.
为了检测定向裂隙介质中横波分裂的方位属性特征,分析地震属性随裂隙密度和方位变化,采用人工吸收边界和反周期扩展边界,用伪谱法获得不同裂隙密度和不同方位地质模型三分量地面记录;应用时频分析和剪切波偏振分析研究由于裂隙方位和密度引起的横波分裂.结果显示,裂隙密度和方位决定着横波分裂的时差和偏振.快慢横波的延迟时间随裂隙密度增大而增加,不同方位相同裂隙密度的横波分裂时差有微小的变化.在45°方位检测时间延迟时间最大.通过时频分析,可以看到不同方位的瞬时主频有显著的变化,在横波分裂处瞬时主频有明显变化.因此,瞬时主频和快横波的偏振以及延迟时间可以作为裂隙方位和密度的指示.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号