首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Offset-dependent characteristics of seismic scattering are useful for characterizing fractured reservoirs. We use two models that have different background medium properties and different azimuthal AVO responses to study elastic wave propagation and scattering in gas-saturated, heterogeneously fractured reservoirs. Heterogeneous fracture density distributions are built through stochastic modelling. Synthetic seismograms are generated by 3-D finite difference modelling, and waveforms along crack-normal and strike directions are considered in this paper. The multiple signal classification (MUSIC) frequency estimator is used in waveform estimation to provide frequency-domain attributes related to seismic wave scattering by fracture heterogeneity. Our results indicate that the strength of the scattering field is a function of the background medium. The strength also increases with increasing fracture scatterer density and with decreasing correlation length of spatial variations of fracture density. The scattering field is weak at the top of the fractured reservoir. The first-order results are dominated by velocity anisotropy of the mean fracture density field. However, the base of the fractured reservoir corresponds to a strong scattering field on which fracture heterogeneity has a larger effect and is characterized by the loss of coherence.  相似文献   

2.
Summary. Theoretical developments of Hudson demonstrate how to calculate the variations of velocity and attenuation of seismic waves propagating through solids containing aligned cracks. The analysis can handle a wide variety of crack configurations and crack geometries. Hudson associates the velocity variations with effective elastic constants. In this paper we associate the variation of attenuation with the imaginary parts of complex effective elastic constants. These complex elastic constants permit the simulation of wave propagation through two-phase materials by the calculation of wave propagation through homogeneous anisotropic solids.  相似文献   

3.
We have analysed the fundamental mode of Love and Rayleigh waves generated by 12 earthquakes located in the mid-Atlantic ridge and Jan Mayen fracture zone. Using the multiple filter analysis technique, we isolated the Rayleigh and Love wave group velocities for periods between 10 and 50  s. The surface wave propagation paths were divided into five groups, and average group velocities calculated for each group. The average group velocities were inverted and produced shear wave velocity models that correspond to a quasi-continental oceanic structure in the Greenland–Norwegian Sea region. Although resolution is poor at shallow depth, we obtained crustal thickness values of about 18  km in the Norwegian Sea area and 9  km in the region between Svalbard and Iceland. The abnormally thick crust in the Norwegian Sea area is ascribed to magmatic underplating and the thermal blanketing effect of sedimentary layers. Maximum crustal shear velocities vary between 3.5 and 3.9  km  s−1 for most paths. An average lithospheric thickness of 60  km was observed, which is lower than expected for oceanic-type structure of similar age. We also observed low shear wave velocities in the lower crust and upper mantle. We suggest that high heat flow extending to depths of about 30  km beneath the surface can account for the thin lithosphere and observed low velocities. Anisotropy coefficients of 1–5 per cent in the shallow layers and >7 per cent in the upper mantle point to the existence of polarization anisotropy in the region.  相似文献   

4.
We investigate the sensitivity of finite-frequency body-wave observables to mantle anisotropy based upon kernels calculated by combining adjoint methods and spectral-element modelling of seismic wave propagation. Anisotropy is described by 21 density-normalized elastic parameters naturally involved in asymptotic wave propagation in weakly anisotropic media. In a 1-D reference model, body-wave sensitivity to anisotropy is characterized by 'banana–doughnut' kernels which exhibit large, path-dependent variations and even sign changes. P -wave traveltimes appear much more sensitive to certain azimuthally anisotropic parameters than to the usual isotropic parameters, suggesting that isotropic P -wave tomography could be significantly biased by coherent anisotropic structures, such as slabs. Because of shear-wave splitting, the common cross-correlation traveltime anomaly is not an appropriate observable for S waves propagating in anisotropic media. We propose two new observables for shear waves. The first observable is a generalized cross-correlation traveltime anomaly, and the second a generalized 'splitting intensity'. Like P waves, S waves analysed based upon these observables are generally sensitive to a large number of the 21 anisotropic parameters and show significant path-dependent variations. The specific path-geometry of SKS waves results in favourable properties for imaging based upon the splitting intensity, because it is sensitive to a smaller number of anisotropic parameters, and the region which is sampled is mainly limited to the upper mantle beneath the receiver.  相似文献   

5.
Effects of fractures on seismic-wave velocity and attenuation   总被引：1，自引：0，他引：1  
The effects of fractures on the seismic velocity and attenuation of a rock are investigated using theoretical results and experimental data. Fractures in a rock mass influence the traveltimes and amplitudes of seismic waves that have propagated through them. The displacement discontinuity model, recently employed in fracture investigations, is modified to describe the effect of fractures on seismic-wave velocity and attenuation. This new model, the modified displacement discontinuity model (MDD), is formulated in a way analogous to transmission-line analysis. The fractures are treated as transmission lines for the passage of seismic waves. The MDD takes into consideration realistic fracture parameters which include the fracture length, the fractional area of a fracture surface in contact, and the nature of the infilling material. A single fracture of varying geometric and material properties is shown to affect dramatically the transmission properties of a propagating waveform, and hence the seismic velocity and attenuation. These effects have been shown to result in a frequency-dependent velocity and attenuation. The sensitivity of the fracture parameters to seismic-wave velocity and attenuation was investigated and interesting results were obtained. Fracture parameters used in designing experimental models consisting of synthetically manufactured cracks were fed into the MDD and a well-known crack model, Hudson's model, for comparison. Velocities as a function of the incident-wave angle were obtained from both numerical models and were compared with the results from the experimental modelling. For P waves, the MDD model results show better agreement with those of the experimental model for all crack densities investigated than those from Hudson's model.  相似文献   

6.
Numerical simulation of the propagation of P waves in fractured media   总被引：1，自引：0，他引：1  
We study the propagation of P waves through media containing open fractures by performing numerical simulations. The important parameter in such problems is the ratio between crack length and incident wavelength. When the wavelength of the incident wavefield is close to or shorter than the crack length, the scattered waves are efficiently excited and the attenuation of the primary waves can be observed on synthetic seismograms. On the other hand, when the incident wavelength is greater than the crack length, we can simulate the anisotropic behaviour of fractured media resulting from the scattering of seismic waves by the cracks through the time delay of the arrival of the transmitted wave. The method of calculation used is a boundary element method in which the Green's functions are computed by the discrete wavenumber method. For simplicity, the 2-D elastodynamic diffraction problem is considered. The rock matrix is supposed to be elastic, isotropic and homogeneous, while the cracks are all empty and have the same length and strike direction. An iterative method of calculation of the diffracted wavefield is developed in the case where a large number of cracks are present in order to reduce the computation time. The attenuation factor Q −1 of the direct waves passing through a fractured zone is measured in several frequency bands. We observe that the attenuation factor Q −1 of the direct P wave peaks around kd = 2, where k is the incident wavenumber and d the crack length, and decreases proportionally to ( kd ) −1 in the high-wavenumber range. In the long-wavelength domain, the velocity of the direct P wave measured for two different crack realizations is very close to the value predicted by Hudson's theory on the overall elastic properties of fractured materials.  相似文献   

7.
Summary. The response of a stratified elastic medium can be conveniently characterized by the Green's tensor for the medium. For coupled seismic wave propagation ( P—SV or fully anisotropic), the Green's tensor may be constructed directly from two matrices of linearly independent displacement solutions. Rather simple forms for the Green's tensor can be found if each displacement matrix satisfies one of the boundary conditions on the seismic field. This approach relates directly to 'reflection matrix' representations of the seismic field.
For a stratified elastic half space the Green's tensor is used to give a spectral representation for coupled seismic waves. By means of a contour integration a general completeness relation is obtained for the 'body wave' and 'surface wave' parts of the seismic field. This relation is appropriate for SH and P–SV waves in an isotropic medium and also for full anisotropy.  相似文献   

8.
We describe a method of expressing azimuthally anisotropic surface wave velocities on the Earth using a local and smooth spherical-spline parametrization. Anisotropy in the Earth leads to azimuthally varying Love and Rayleigh wave velocities that can be expressed as (cos 2ζ, sin 2ζ) and (cos 4ζ, sin 4ζ) perturbations to the isotropic velocities, where ζ is the direction of surface-wave propagation. The strength of the perturbations varies laterally, and a current goal of seismic tomography is the detailed global mapping of these variations. Several parametrizations have previously been used to describe azimuthally varying velocities. The representation proposed here uses spherical splines and is designed to describe smooth variations in both the strength and geometry of azimuthal anisotropy. The method builds on a simple geometrical approximation for the local azimuth of propagation expressed at the defining spline knot points. It avoids the singularities at the poles that result when azimuthal variations are parametrized using traditional scalar spherical harmonics. Compared with a generalized spherical-harmonic expansion of the tensor fields that represent 2ζ and 4ζ azimuthal variations smoothly on a sphere, the new method offers the advantages of local geographical support and simplicity of implementation.  相似文献   

9.
Summary Isotropic earth models are unable to provide uniform fits to the gross Earth normal mode data set or, in many cases, to regional Love-and Rayleigh-wave data. Anisotropic inversion provides a good fit to the data and indicates that the upper 200km of the mantle is anisotropic. The nature and magnitude of the required anisotropy, moreover, is similar to that found in body wave studies and in studies of ultramafic samples from the upper mantle. Pronounced upper mantle low-velocity zones are characteristic of models resulting from isotropic inversion of global or regional data sets. Anisotropic models have more nearly constant velocities in the upper mantle.
Normal mode partial (Frediét) derivatives are calculated for a transversely isotropic earth model with a radial axis of symmetry. For this type of anisotropy there are five elastic constant. The two shear-type moduli can be determined from the toroidal modes. Spheroidal and Rayleigh modes are sensitive to all five elastic constants but are mainly controlled by the two compressional-type moduli, one of the shear-type moduli and the remaining, mixed-mode, modulus. The lack of sensitivity of Rayleigh waves to compressional wave velocities is a characteristic only of the isotropic case. The partial derivatives of the horizontal and vertical components of the compressional velocity are nearly equal and opposite in the region of the mantle where the shear velocity sensitivity is the greatest. The net compressional wave partial derivative, at depth, is therefore very small for isotropic perturbations. Compressional wave anisotropy, however, has a significant effect on Rayleigh-wave dispersion. Once it has been established that transverse anisotropy is important it is necessary to invert for all five elastic constants. If the azimuthal effect has not been averaged out a more general anisotropy may have to be allowed for.  相似文献   

10.
It is well established that the Earth's uppermost mantle is anisotropic, but there are no clear observations of anisotropy in the deeper parts of the mantle. Surface waves are well suited to observe anisotropy since they carry information about both radial and azimuthal anisotropy. Fundamental mode surface waves, for commonly used periods up to 200 s, are sensitive to structure in the first few hundred kilometres, and therefore, do not provide information on anisotropy below. Higher mode surface waves have sensitivities that extend to and beyond the transition zone, and should thus give insight about azimuthal anisotropy at greater depths. We have measured higher mode Love and Rayleigh phase velocities using a model space search approach, which provides us with consistent relative uncertainties from measurement to measurement and from mode to mode. From these phase velocity measurements, we constructed global anisotropic phase velocity maps. Prior to inversion, we determine the optimum relative weighting for anisotropy. We present global azimuthal phase velocity maps for higher mode Rayleigh waves (up to the sixth higher mode) and Love waves (up to the fifth higher mode) with corresponding average model uncertainties. The anisotropy we derive is robust within the uncertainties for all modes. Given the ray theoretical sensitivity kernels of Rayleigh and Love wave modes, the source of anisotropy is complex, but mainly located in the asthenosphere and deeper. Our models show a good correspondence with other studies for the fundamental mode, but we have been able to achieve higher resolution.  相似文献   

11.
Summary. This paper reviews recent work, much of it unpublished, on the effects of anisotropy on seismic waves, and lays the theoretical background for some of the other papers in this number of the Geophysical Journal .
The propagation of both body and surface waves in anisotropic media is fundamentally different from their propagation in isotropic media, although the differences in behaviour may be comparatively subtle and difficult to observe. One of the most diagnostic of these anomalies, which has been observed on some surface-wave trains, and should be evident in body-wave arrivals, is generalized, three-dimensional polarization, where the Rayleigh motion is coupled to the Love, and the P and SV motion is coupled to the SH . This coupling introduces polarization anomalies which may be used to investigate anisotropy within the Earth.  相似文献   

12.
  相似文献   

13.
A crack model in antiplane shear configuration is shown representing creep processes interpreted in terms of 'viscous' deformation of a narrow plastic layer, characterized by inhomogeneous rheological properties, embedded within a homogeneous elastic medium. The evolution in time of slip and stress over the crack plane is studied through a truncated expansion in Chebyshev polynomials, and convergence is proved to be fast in the simple examples considered. Finite-stress solutions are found which are compatible with constitutive relations of elasto-plastic materials and furthermore these allow us to simulate creep propagation and stress transfer between locked and unlocked fault segments. This model provides a simple interpretation of the shallow depth of the seismogenic layer observed in several areas of the world and lends itself to modelling creep processes during either post-seismic rebound or pre-seismic stress buildup. Stress transfer is accomplished mostly by the slow extension of the creeping section. During a seismic cycle it is envisaged that different regimes dominate over deep, intermediate and shallow sections of faults: (i) slow pre-seismic stress build-up accompanied by creep and stress migration toward intermediate depths; (ii) brittle fracture over shallow and intermediate sections of faults; (iii) post-seismic rebound over intermediate and deep sections of faults. The present crack model, while providing finite-stress solutions, allows a better understanding of how stress may accommodate at different depths over a fault plane during a seismic cycle.  相似文献   

14.
A large data set of amplitude measurements of minor and major arc Rayleigh waves in the period range 73–171 s is collected. By comparing these amplitudes with the amplitudes of synthetic waveforms calculated by mode summation, maps of lateral variations in the apparent attenuation structure of the Earth are constructed. An existing formalism for predicting the effects of focusing is employed to calculate amplitude perturbations for the same data set. These perturbations are used to construct 'pseudo‐attenuation' maps and these results are compared with the apparent attenuation maps calculated from the data. It is shown that variations in Rayleigh wave amplitude perturbations in the Earth are dominated by attenuation at long wavelengths (below about degree 8) and by elastic structure at shorter wavelengths. It is also shown that the linear approximation for focusing is successful at predicting Rayleigh wave amplitudes using existing phase velocity maps. These results indicate that future attempts to model the velocity structure of the Earth would be assisted by incorporating amplitude data and by jointly inverting for Q structure.  相似文献   

15.
Large scale seismic anisotropy in the Earth's mantle is likely dynamically supported by the mantle's deformation; therefore, tomographic imaging of 3-D anisotropic mantle seismic velocity structure is an important tool to understand the dynamics of the mantle. While many previous studies have focused on special cases of symmetry of the elastic properties, it would be desirable for evaluation of dynamic models to allow more general axis orientation. In this study, we derive 3-D finite-frequency surface wave sensitivity kernels based on the Born approximation using a general expression for a hexagonal medium with an arbitrarily oriented symmetry axis. This results in kernels for two isotropic elastic coefficients, three coefficients that define the strength of anisotropy, and two angles that define the symmetry axis. The particular parametrization is chosen to allow for a physically meaningful method for reducing the number of parameters considered in an inversion, while allowing for straightforward integration with existing approaches for modelling body wave splitting intensity measurements. Example kernels calculated with this method reveal physical interpretations of how surface waveforms are affected by 3-D velocity perturbations, while also demonstrating the non-linearity of the problem as a function of symmetry axis orientation. The expressions are numerically validated using the spectral element method. While challenges remain in determining the best inversion scheme to appropriately handle the non-linearity, the approach derived here has great promise in allowing large scale models with resolution of both the strength and orientation of anisotropy.  相似文献   

16.
To quantify the seismic properties of lower crustal rocks and to better constrain the origin of the lower crustal seismic reflectivity, we determined the complete 3-D seismic properties of a lower crustal section. Eight representative samples of the main lithologic and structural units outcropping in the Val Sesia (Ivrea zone) were studied in detail. The seismic velocities were calculated using the single crystal stiffness coefficients and the lattice preferred orientation (LPO) of each mineral in all samples. The 21 stiffness coefficients characterizing the elastic behaviour of each rock are determined. Mafic and ultramafic rocks such as pyroxenite and pyroxene-bearing gabbros display complex shear wave properties. These rocks are weakly birefringent (maximum 0.1 kms−1) and it is difficult to find consistent relationships between the seismic properties and the rock structure. On the other hand, seismic properties of deformed felsic rocks are essentially controlled by mica. They display strong S -wave birefringence (0.3 km s−1) and relatively high V p anisotropy (7.6 per cent). Amphibole also strongly influences the rock birefringence patterns. For both kind of rocks, the foliation is highly birefringent and the fast polarized shear wave is systematically oriented parallel to the foliation. We show that the number of mineral phases in the rock strongly controls the anisotropy. The seismic anisotropy has a complex role in the P -wave reflectivity. Compared to the isotropic case, anisotropy enhances the reflection coefficient for about 60 per cent of the possible lithological interfaces. For 40 per cent of the interfaces, the reflection coefficient is much lower when one considers the medium as anisotropic.  相似文献   

17.
Summary. Analysis of NORSAR records and a number of Soviet microfilms reveals second-mode surface Caves propagating along paths covering a large part of Eurasia. These second modes in the 6–15-s period band are frequently disturbed by other surface-wave modes and by body-wave arrivals. However, in all cases, where the modes appear to be undisturbed and show normal dispersion, the Second Rayleigh modes have a slowly varying phase difference with the Second Love modes. This coupling has the particle motion of Inclined Rayleigh waves characteristic of surface-wave propagation in anisotropic media, where the anisotropy possesses a horizontal plane of symmetry. Numerical examination of surface wave propagating in Earth models, with an anisotropic layer in the upper mantle, demonstrate that comparatively small thicknesses of material with weak velocity anisotropy can produce large deviations in the polarizations of Inclined Rayleigh Second modes. In many structures, these inclinations are very sensitive to small changes in anisotropic orientation and to small changes in the surrounding isotropic structure. It is suggested that examination of second mode inclination anomalies of second mode surface waves may be a powerful technique for examining the detailed anisotropic structure of the upper mantle.  相似文献   

18.
Seismic tomography has been one of the primary tools to image the interior of the earth and other elastic structures. To date the inversions of compressional ( P ) and shear ( S ) wave speeds have been carried out separately under the assumption that P traveltimes are affected only by the P wave speed of the elastic media and S traveltimes by the S wave speed. Using numerical and analytical solutions, we show that for finite-frequency seismic waves, S wave speed perturbations may have significant effects on P waveforms. This suggests that when waveform-derived traveltime and amplitude anomalies are used in tomographic inversions, the P -wave measurements should be related to not only P wave speed perturbations but also S wave speed perturbations.  相似文献   

19.
The dynamic coalescence of two mode II cracks on a planar fault is simulated here using the elastodynamic boundary integral equation method. We focus on the complexity of the resultant slip rate and seismic radiation in the crack coalescence model (CCM) and on the reconstruction of a single crack model (SCM) that can reproduce the CCM waveforms from heterogeneous source parameters rather than coalescence. Simulation results reveal that localized higher slip rates are generated by coalescence as a result of stress interaction between the approaching crack tips. The synthesized seismic radiation exhibits a distinct coalescence phase that has striking similarities to stopping phases in the radiation and propagation properties. The corresponding SCM yields a singular increase in the stress drop distribution, which is accompanied by a sudden decrease in it across the point of coalescence in the CCM. This implies that the generation of high-frequency radiation is more efficient from coalescence than from stopping, although both phenomena exhibit the same strong  ω−2  -type displacement spectra.  相似文献   

20.
Summary. Seismic anisotropy has been previously studied at depths usually not exceeding 100 or 150 km. In this paper we present a method of analysis of seismic records which is very sensitive to azimuthal anisotropy and is applicable at almost any depth range. The idea of the method is to detect and analyse the SH -component of the waves, converted from P to S in the mantle. The procedure of record processing includes frequency filtering, axis rotation, transformation of the record to a standard form, stacking the standardized SH -component records of many seismic events, and the harmonic analysis of amplitude as a function of the direction of wave propagation. When applied to the long-period records of NORSAR the procedure detected a converted wave with the properties implying the possibility of its propagation in a transversely isotropic medium with a horizontal axis of symmetry . Our preferred model postulates anisotropy of ∼ 1 per cent in a layer 50 km thick at the base of the upper mantle.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号