首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 50 毫秒
1.
The eastern Pontides orogenic belt is one of the most complex geodynamic settings in the Alpine–Himalayan belt due to the lack of systematical geological and geophysical data. In this study, 1D crustal structure and P-wave velocity distribution obtained from gravity modeling and seismological data in the area has been used for the development of the thermal model of the eastern Pontides orogenic belt. The computed temperature-depth profiles suggest a temperature of 590?±?60°C at a Moho depth of 35?km indicates the presence of a brittle-ductile transition zone. This temperature value might be related to water in the subducted crust of the Tethys oceanic lithosphere. The Curie temperature depth value of 29?km, which may correspond to the crustal magma chambers, is found 5–7?km below the Moho depth. Surface heat flow density values vary from 66.5 and 104.7?mW?m?2. High mantle heat flow density value of 48?mW?m?2 is obtained for the area should be related to melting of the lithospheric mantle caused by upwelling of asthenosphere.  相似文献   

2.
The Chinese Continental Scientific Drilling (CCSD) project is located at the Sulu ultrahigh-pressure metamorphic (UHPM) belt. It offers a unique opportunity for studying the radiogenic heat production of both shallower and deeper rocks. Based on the concentrations of radiogenic elements U, Th and K on 349 samples from main hole of CCSD (CCSD MH), pilot holes and exposures, we determined radiogenic heat productions of all major rock types in the Sulu UHPM belt. Results show the mean values of orthogneiss and paragneiss are respectively 1.65 ± 0.81 and 1.24 ± 0.61 µW m? 3. Due to different composition and grade of retrogressive metamorphism, the eclogites display significant scatter in radiogenic heat production, ranging from 0.01 to 2.85 µW m? 3, with a mean of 0.44 ± 0.55 µW m? 3. The radiogenic heat production in ultramafic rocks also varies within a large range of 0.02 to 1.76 µW m? 3, and the average turns out to be 0.18 ± 0.31 µW m? 3. Based on the measurements and crustal petrologic model, the vertical distribution model of heat production in Sulu crust is established. The resulting mean heat production (0.76 µW m? 3) contributes 24 mW m? 2 to the surface heat flow. 1-D thermal model indicates that the temperature at the Moho reaches above 750 °C, and the thermal thickness of the lithosphere is ~ 75 km, in good agreement with the geophysical results. The high teat flow (~ 75 mW m? 2) together with thin lithosphere presents strong support for the extension events during the late Cretaceous and Cenozoic.  相似文献   

3.
A global heat flow map has been derived from existing observations supplemented in areas without data by an empirical predictor based on tectonic setting and age. In continental areas the predictor is based on the observed correlation of heat flow with age of last tectono-thermal event, and in oceanic regions on the observed relation of heat flow to age of ocean floor. The predictor was used to assign mean heat flow values to 5° × 5° grid areas on the globe, weighted according to the relative area of tectonic provinces represented. A spherical harmonic analysis to degree 12 of the heat flow field yields a mean value of 59 mW m?2, a rms residual of 13 mW m?2, and an amplitude spectrum which decreases gradually and almost monotonically fromn = 1. The spherical harmonic representation of the heat flow field is free of the unreal distortions which have characterized earlier analyses based on a geographically sparse data set. Areas with residuals greater than 15 mW m?2 comprise less than 19% of the area of the globe, thus indicating that most heat flow provinces have characteristic dimensions adequately represented in a 12-degree analysis.  相似文献   

4.
A standard core analysis technique has been modified to estimate porosities from measurements on rock fragments. For the range of rocks tested, chip-determined fractional porosities were within ±0.025 of the values measured on solid-core samples. This has enabled thermal conductivity measurements on rock fragments to be corrected for the effect of porosity, yielding agreement with conductivity determinations on solid core generally to better than ± 10%. The application of this is illustrated by the determination of heat flow in a 300-m borehole in western Cyprus (latitude 34°54′N, longitude 32°34′E, elevation 82 m). A decrease in temperature gradient with depth is almost completely compensated for by increasing thermal conductivity, and the best value for heat flow at this site is 23 ± 4 mW m?2.  相似文献   

5.
The Red Sea is a modern example of continental fragmentation and incipient ocean formation. Heat flow data have been collected from eastern Egypt to provide information relating to the mode and mechanism of Red Sea opening. Preliminary heat flow data, including new data reported here, are now available from twenty-five sites in eastern Egypt and one site in western Sinai. A pattern of low to normal heat flow (35–55 mW m−2) inland with high heat flow (75–100 mW m−2) in a zone within 30 to 40 km of the coast is indicated.Moderately high heat flow (around 70 mW m−2) is indicated for the Gulf of Suez. The coastal zone thermal anomaly appears continuous with high heat flow previously reported for the Red Sea shelf. Heat production data indicate that the coastal thermal anomaly is not primarily related to crustal radiogenic heat production. The effects of rapid erosion may contribute to the anomaly, but are not thought to be the primary cause of the anomaly. If the anomaly is caused by lateral conduction from hot, extended, offshore lithosphere, the extension must have been active for the last 30 Ma or so, and a minimum of 100% extension is indicated. Alternatively, the anomaly is primarily caused by high mantle heat flow causing lithospheric thinning, centred beneath the Red Sea. The Red Sea is probably underlain by dominantly basic crust, formed either by intrusion into attenuated continental crust or sea-floor spreading, and for most purposes the crust formed in these two modes of extension may be essentially indistinguishable. Fission-track ages from eastern Egypt indicate that uplift started prior to, or at latest at the time of initial Red Sea opening, and this result, together with thermo-mechanical considerations, suggests an active asthenospheric upwelling beneath the Red Sea and high temperature in the lithosphere prior to extension.  相似文献   

6.
Heat flow values were calculated from direct measurements of temperature and thermal conductivity at thirteen sites in the Arkansas-Missouri Ozark Plateau region. These thirteen values are augmented by 101 estimates of heat flow, based on thermal conductivity measurements and temperature gradients extrapolated from bottom-hole temperatures. The regional heat flow profile ranges from 9 mW m−2 to over 80 mW m−2, but at least two distinct thermal regimes have been identified. Seven new heat flow determinations are combined with three previously published values for the St. Francois Mountains (SFM), a Precambrian exposure of granitic and rhyolitic basement rocks, average 47 mW m−2. Radioactive heat production of 76 samples of the exposed rocks in the SFM averages 2.4 μW m−2 and a typical continental basement contribution of 14 mW m−2 is implied. Conversely, the sedimentary rock sequence of the plateau is characterized by an anomalously low heat flow, averaging approximately 27 mW m−2. Groundwater transmissivity values that are based on data from 153 wells in deep regional aquifers demonstrate an inverse relationship to the observed heat flow patterns. The areas of high transmissivity that correspond to areas of low total heat flux suggest that the non-conservative vertical heat flow within the Ozark sedimentary sequence can be attributed to the effects of groundwater flow.  相似文献   

7.
The surface heat flow in the interior of Archean cratons is typically about 40 mW m−2 while that in Proterozoic and younger terrains surrounding them is generally considerably higher. The eighty-four heat flow observations from southern Africa provide an excellent example of this contrast in surface heat flow, showing a difference of some 25 mW m−2 between the Archean craton and younger peripheral units. We investigate two possible contributions to this contrast: (1) a shallow mechanism, essentially geochemical, comprising a difference in crustal heat production between the two terrains, and (2) a deeper mechanism, essentially geodynamical, arising from the existence of a lithospheric root beneath the Archean craton which diverts heat away from the craton into the thinner surrounding lithosphere. A finite element numerical model which explores the interplay between these two mechanisms suggests that a range of combinations of differences in crustal heat production and lithospheric thickness can lead to the contrast in surface heat flow observed in southern Africa. Additional constraints derived from seismological observations of cratonic roots, the correlation of surface heat flow and surface heat production, petrological estimates of the mean heat production in continental crust and constraints on upper mantle temperatures help narrow the range of acceptable models. Successful models suggest that a cratonic root beneath southern Africa extends to depths of 200–400 km. A root in this thickness range can divert enough heat to account for 50–100% of the observed contrast in surface heat flow, the remainder being due to a difference in crustal heat production between the craton and the surrounding mobile belts in the range of zero to 0.35 μW m−3.  相似文献   

8.
Sixty new measurements together with published heat flow data in the South Atlantic between 20°S and 35°S latitude have been analyzed. Heat flux is greater through the eastern Mid-Atlantic Ridge flank and basin than their counterparts on the west but the standard deviation or spatial variation is greater on the west, contrary to expectation based on sediment thickness. The variance in the data indicates that this asymmetry in mean heat flux is statistically significant at 87% confidence level. A pair of ridge-flank minima appear in a composite trans-Atlantic profile of heat flux versus sea-floor age, suggesting hydrothermal circulation in the young oceanic crust. The Walvis Ridge has a mean excess heat flux of 28 mW m?2 (0.7 μcal cm?2 sec?1) above the surrounding Cape and Angola Basins, and decreases along the ridge towards the northeast. Consistent with the apparent asymmetric distribution in the South Atlantic, it is also significantly higher than that of the Rio Grande Rise. We hypothesize that the trend and larger mean heat flux of the Walvis Ridge is best explained by a hot-spot origin, perhaps combined with higher radioactivity in the crust. However, the morphologic and heat flow differences between the Walvis Ridge and Rio Grande Rise suggest that these features have different geologic histories.  相似文献   

9.
Five new heat flow values obtained in deep boreholes in the Western Carpathians are presented. Three holes were located in pre-Neogene folded units, the other two holes in Tertiary volcanites. The heat flow values range from 50.7 to 73.3 mW m?2 with an average value of 65.9 mW m?2 and they represent very needed information on the geothermal field in an area where heat flow values are still scarce.  相似文献   

10.
We present the results of twenty heat flow stations in the Gulf of Oman which are used to infer the first reliable age estimates for the basin. A mean surface heat flux of 42.6±3.6 mW m?2 exhibits no significant regional variation. After correction for thick and rapidly deposited sediments this yields an age of 70 to 100 Ma according to oceanic thermal models. This age is also consistent with the sediment corrected basement depths of 5.5–6.0 km and with formation during the Cretaceous quiet zone. The latter can explain the absence of magnetic sea-floor spreading lineations. Heat flow measurements are also used to confirm the presence of gas hyrdate layers. The measured thermal gradient yields a depth for the solid to free gas phase transition which is the same as that deduced from “bright spots” seen on seismic reflection profiles.  相似文献   

11.
Heat flow data from the eastern Mediterranean region indicates an extensive area of low heat flow, spreading over the whole basin of the Mediterranean east of Crete (Levantine Sea), Cyprus, and northern Egypt. The average of the marine heat flow measurements in the Levantine Sea is 25.7±8.4 mW/m2, and the heat flow on Cyprus is 28.0±8.0 mW/m2. The estimated values of heat flow in northern Egypt range from 38.3±7.0 to 49.9±9.3 mW/m2, apparently with no consistent trend. To the east, on the coast of Israel, the heat flow values increase, ranging from 36.6±22.4 to 56.7±14.2 mW/m2 along a SSE trend. The trend apparently correlates with an increase in crustal thickness, which is about 23 km at the north-west base of the Nile-Delta-cone, and close to 40 km beneath Israel.Contribution No. 157, Department of Geology, Kent State University, Kent, Ohio, USA.  相似文献   

12.
Based on the data of geo-temperature and thermophysical parameters of rocks in the Kuqa Depression and the Tabei Uplift, northern flank of the Tarim Basin, in terms of the analytical solution of 1-D heat transfer equation, the thermal structure of the lithosphere under this region is determined. Our results show that the average surface heat flow of the northern flank of the Tarim Basin is 45 mW/m2, and the mantle heat flow is between 20 and 23 mW/m2; the temperature at crust-mantle boundary (Moho) ranges from 514℃ to 603℃ and the thermal lithosphere where the heat conduction dominates is 138-182 km thick. Furthermore, in combination with the P wave velocity structure resulting from the deep seismic sounding profile across this region and rheological modeling, we have studied the local composition of the lithosphere and its rheological profile, as well as the strength distribution. We find that the rheological stratification of the lithosphere in this region is apparent. The lowermost of the lower crust is ductile; however,the uppermost of the mantle and the upper and middle parts of the crust are both brittle layers,which is typically the so-called sandwich-like structure. Lithospheric strength is also characterized by the lateral variation, and the uplift region is stronger than the depression region. The lithospheric strength of the northem flank of the Tarim Basin decreases gradually from south to north; the Kuqa Depression has the lowest strength and the south of the Tabei Uplift is strongest.The total lithospheric strength of this region is 4.77× 1012-5.03 × 1013 N/m under extension, and 6.5 × 1012-9.4× 1013 N/m under compression. The lithospheric brittle-ductile transition depth is between 20 km and 33 km. In conclusion, the lithosphere of the northern flank of the Tarim Basin is relatively cold with higher strength, so it behaves rigidly and deforms as a whole, which is also supported by the seismic activity in this region. This rigidity of the Tarim lithosphere makes it little deform interior, but only into flexure under the sedimentation and tectonic loading associated with the rapid uplift of the Tianshan at its northern margin during the Indian-Eurasian continental collision following the Late Eocene. Finally, the influences of factors, such as heat flow, temperature,crustal thickness, and especially basin sediment thickness, on the lithospheric strength are discussed here.  相似文献   

13.
The results of seismic measurements along the deep seismic sounding profile VII and terrestrial heat flow measurements used for construction of heat generation models for the crust in the Paleozoic Platform region, the Sudetic Mountains (Variscan Internides) and the European Precambrian Platform show considerable differences in mantle heat flow and temperatures. At the base of the crust variations from 440–510°C in the models of Precambrian Platform to 700–820°C for the Paleozoic Platform and the Variscan Internides (Sudets) are found. These differences are associated with considerable mantle heat flow variations.The calculated models show mantle heat flow of about 8.4–12.6 mW m–2 for the Precambrian Platform and 31 mW m–2 to 40.2 mW m–2 for Paleozoic orogenic areas. The heat flow contribution originating from crustal radioactivity is almost the same for the different tectonic units (from 33.5 mW m–2 to 37.6 mW m–2). Considerable physical differences in the lower crust and upper mantle between the Precambrian Platform and the adjacent areas, produced by lateral temperature variations, could be expected. On the basis of carbon ratio data it can be concluded that the Carboniferous paleogeothermal gradient was much lower in the Precambrian Platform area than in the Paleozoic Platform region.  相似文献   

14.
The content of K, Th and U in the continental crust is estimated based on the assumption that the concentration of these elements decreases with depth asAx = A0e?x/D [11], withAx andA0 the heat production rates at depthx and at the surface, respectively. Taking the weighted mean heat production rate of the intrusive rocks of the upper crust asA0 = 2.33 μWm?3, that of the granulites representing the lower crust asAx = 0.72 μWm?3, and the mean scale heightD= 9.5km [1] the average vertical distancex = b between these intrusives and granulites is 11.2 km. Withb known and the average concentrations of K, Th and U in granulites and intrusive rocks of the upper crust the scale heights of the vertical distribution of these elements areDK = 71km,DTh = 9.5km,DU = 5.8km. The knowledge of these parameters permits to calculate the average concentrations of these elements in a 33.3 km thick crust:K= 2.19%,Th= 4.43ppm,U= 0.66ppm; Th/U = 6.7 and K/U = 3.3 × 104. The resulting heat flow is 23.0 mW m?2 which is practically identical with the value deduced from heat flow measurements. Assuming that the Th/U ratio of the entire crust—including the sediments—is 3.9, the high ratio of 6.7 in the crystalline crust indicates that about 7.2 × 1012 t U were extracted from it. All rocks with Th/U ratios <3.9 are possible sinks of this U. About half that amount is deposited in sedimentary rocks, mainly in black shales. The second important sink are the volcanic rocks of the continental margins.  相似文献   

15.
We present a set of 39 new determinations of heat flow and radiogenic heat production for several different geological environments in the State of New Hampshire (U.S.A.). With the extensive data set now available for the state, the linear relation of heat flow and heat production appears as a very useful generalization for the study of the heat flow field of a geological province. Our measurements indicate that the vertical distribution of radiogenic heat production is similar in plutonic and metasedimentary rocks. Our data are compatible with the linear relationship established earlier by F. Birch and his co-workers in 1968. Young granites are markedly enriched in radioactive elements and those which do not outcrop are revealed by anomalies in the general relation of heat flow versus radioactivity.Heat flow is high for plutons by low elsewhere. The mean heat flow through metasedimentary formations is 1.15 μcal/cm2 s (48 mW/m2), a value near the mean heat flow for old cratons. The lowest heat flow measured is 0.76 μcal/cm2 s (32 mW/m2) for a unit poor in radioactivity. The heat flow field grades smoothly into the low heat flow regions of the Canadian Shield.The New Hampshire region is in thermal equilibrium: its heat flow is in secular equilibrium with the heat generated by crustal sources and that supplied from the mantle. In this area, the thermal perturbations due to orogenic events decrease below the detection level in less than 200–275 Ma. The thickness of the layer which is thermally affected during continent-continent collision-type orogenies cannot be greater than about 190 km.  相似文献   

16.
Xun Zhou 《水文研究》2008,22(16):3176-3180
Measurements of the tide and groundwater levels in coastal zones are of importance in determining the properties of coastal aquifers. The solution to a one‐dimensional unsteady groundwater flow model in a coastal confined aquifer with sinusoidal fluctuation of the tide shows that the tidal efficiency decreases exponentially with distance and the time lag increases linearly with distance from the coast. The aquifer property described by the ratio of storage coefficient to transmissivity is determined if the damping constant of the tidal efficiency or the slope of the time lag with distance are obtained on the basis of tidal measurements. Hourly observations of the tide and groundwater levels at 10 wells on the northern coast near Beihai, China show that with distance from the coast, tidal efficiency decreases roughly exponentially and the time lag increases roughly linearly. The estimated ratio of storage coefficient to transmissivity of the confined aquifer ranges from 1·169 × 10?6 d m?2 to 1·83 × 10?7 d m?2. For a given transmissivity of 750 m2 d?1, the storage coefficient of the aquifer is 8·7675 × 10?4 with the tidal efficiency method and 1·3725 × 10?4 with the time lag method. The damping constant of the tidal efficiency with distance can be defined as the tidal propagation coefficient. The value of the confined aquifer is determined as 0·0018892 m?1. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

17.
We have obtained a suite of 42 closely spaced, acoustically navigated, heat flow measurements on well-sedimented crust of anomaly M0 age (109 Ma) in the northwest Atlantic Ocean (25°N, 68°W; 950 km south of Bermuda). The mean and standard deviation of the values obtained are 1.13 HFU (μcal/cm2 s) (47.3 mW/m2) and 0.05 HFU (2.1 mW/m2), respectively. Some of the variability is accounted for by refractive effects of the basement topography. Drill core data and our modelling suggest that the thermal conductivity contrast between sediments and basement rocks in this region is less than a factor of 1.6. The mean heat flow is close to the 1.1 HFU (46 mW/m2) predicted by both the plate and boundary layer cooling models of the oceanic lithosphere. This is the first detailed comparison with theoretical cooling models on old Atlantic Ocean crust. Since the difference in surface heat flow (0.15 HFU) predicted by the two cooling models for the oldest observed oceanic lithosphere (180 Ma) is also not much larger than the range of uncertainty in our observations, discrimination between the two models on the basis of surface heat flow data alone may prove difficult.  相似文献   

18.
More than fifty heat flow measurements in Italy are examined. The values, corrected only for local influences (when present), are related to the main geological features with the following results: foreland areas, 55±19 mW m–2, foredeep areas, 45±21 mW m–2; folded regions and intermountain depressions, 76±29 mW m–2. In volcanic areas the heat flow rises to in excess of 600 mW m–2. From a tectonic point of view, these values are consistent with the hypothesis that the Apennine chain is intersected by two arcuate structures: the first from Liguria to Latium is very probably a continental arc, that is an are which occurs within a continent, and the second from Campania to Calabria is very similar from geophysical evidence to the classic island arcs.  相似文献   

19.
We report the first detailed study of spatial variations on the diffuse emission of carbon dioxide (CO2) and hydrogen sulfide (H2S) from Hengill volcanic system, Iceland. Soil CO2 and H2S efflux measurements were performed at 752 sampling sites and ranged from nondetectable to 17,666 and 722?g?m?2?day?1, respectively. The soil temperature was measured at each sampling site and used to evaluate the heat flow. The chemical composition of soil gases sampled at selected sampling sites during this study shows they result from a mixing process between deep volcanic/hydrothermal component and air. Most of the diffuse CO2 degassing is observed close to areas where active thermal manifestations occur, northeast flank of the Hengill central volcano close to the Nesjavellir power plant, suggesting a diffuse degassing structure with a SSW?CNNE trend, overlapping main fissure zone and indicating a structural control of the degassing process. On the other hand, H2S efflux values are in general very low or negligible along the study area, except those observed at the northeast flank of the Hengill central volcano, where anomalously high CO2 efflux and soil temperatures were also measured. The total diffuse CO2 emission estimated for this volcanic system was about 1,526?±?160?t?day?1 of which 453?t?day?1 (29.7?%) are of volcanic/hydrothermal origin. To calculate the steam discharge associated with the volcanic/hydrothermal CO2 output, we used the average H2O/CO2 mass ratio from 12 fumarole samples equal to 88.6 (range, 9.4?C240.2) as a representative value of the H2O/CO2 mass ratios for Hengill fumarole steam. The resulting estimate of the steam flow associated with the gas flux is equal to 40,154?t?day?1. The condensation of this steam results in thermal energy release for Helgill volcanic system of 1.07?×?1014?J?day?1 or to a total heat flow of 1,237?MWt.  相似文献   

20.
Application of the silica geothermometer to over 70,000 non-thermal groundwaters from the United States has shown that there is a correlation between the average silica geotemperatures for a region (T SiO2 in °C) and the known regional heat flow (q in mW m?2) of the form: 1 $$TSiO_2 = mq + b$$ wherem andb are constants determined to be 0.67°C m2 mW?1 and 13.2°C respectively. The physical significance of ‘b’ is the mean annual air temperature. The slope ‘m’ is related to the minimum average depth to which the groundwaters may circulate. This minimum depth is estimated to be between 1.4 and 2.0 km depending on the rock type. A preliminary heat flow map based on equation (1) is presented using theT SiO2 for new estimates of regional heat flow where conventional data are lacking. Anomalously high localT SiO2 values indicate potential geothermal areas.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号