共查询到20条相似文献，搜索用时 31 毫秒
1.
Interplate Earthquake Fault Slip During Periodic Earthquake Cycles in a Viscoelastic Medium at a Subduction Zone 总被引：1，自引：0，他引：1
K. Hirahara 《Pure and Applied Geophysics》2002,159(10):2201-2220
--A 2-D finite-element-method (FEM) numerical experiment of earthquake cycles at a subduction zone is performed to investigate the effect of viscoelasticity of the earth on great interplate earthquake fault slip. We construct a 2-D viscoelastic FEM model of northeast Japan, which consists of an elastic upper crust and a viscoelastic mantle wedge under gravitation overlying the subducting elastic Pacific plate. Instead of the dislocation model prescribing an amount of slip on a plate interface, we define an earthquake cycle, in which the plate interface down to a depth is locked during an interseismic period and unlocked during coseismic and postseismic periods by changing the friction on the boundary with the master-slave method. This earthquake cycle with steady plate subduction is periodically repeated to calculate the resultant earthquake fault slip.¶As simulated in a previous study (Wang, 1995), the amount of fault slip at the first earthquake cycle is smaller than the total relative plate motion. This small amount of fault slip in the viscoelastic medium was considered to be one factor explaining the small seismic coupling observed at several subduction zones. Our simulation, however, shows that the fault slip grows with an increasing number of repeated earthquake cycles and reaches an amount comparable to the total relative plate motion after more than ten earthquake cycles. This new finding indicates that the viscoelasticity of the earth is not the main factor in explaining the observed small seismic coupling. In comparison with a simple one-degree-of-freedom experiment, we demonstrate that the increase of the fault slip occurs in the transient state from the relaxed initial state to the stressed equilibrium state due to the intermittent plate loading in a viscoelastic medium. 相似文献
2.
The Variation of Stresses due to Aseismic Sliding and its Effect on Seismic Activity 总被引：2，自引：0，他引：2
— Numerical simulation of recurring large interplate earthquakes in a subduction zone is conducted to explore the effects of aseismic sliding on the variation of stresses and the activity of small earthquakes. The frictional force obeying a rate- and state-dependent friction law is assumed to act on the plate interface in a 2-D model of uniform elastic half-space. The simulation results show that large earthquakes repeatedly occur at a constant time interval on a shallow part of the plate interface and that aseismic sliding migrates from the upper aseismic zone as well as from the lower aseismic zone into the central part of the seismogenic zone before the occurrence of a large interplate earthquake. This spatiotemporal variation of aseismic sliding significantly perturbs the stresses in the overriding plate and in the subducting oceanic plate, leading to the precursory seismic quiescence in the overriding plate and the activation of the intermediate-depth earthquakes of down-dip tension type. After the occurrence of a large interplate earthquake, the activity of the intermediate-depth earthquakes of down-dip compression type in the subducting slab is expected to increase and migrate downward. This is because the downward propagation of postseismic sliding causes the downward migration of compressional-stress increase in the down-dip direction of the plate interface. The simulation result further indicates that episodic events of aseismic sliding may occur when the spatial distributions of friction parameters are significantly nonuniform. The variation of stresses due to episodic sliding is expected to cause seismicity changes. 相似文献
3.
—A tectonic state of a locked subduction is considered to be a possible source of a future interplate earthquake. Discriminating an actually locked state to verify its extent is therefore essential in constructing an accurate prospect against the forthcoming earthquake. Micorearthquake seismicity is an effective tool for such an analysis because it is considered to be a faithful indicator of the stress state, and is expected to exhibit a characteristic pattern in the area where the locked state in the subduction appears with a certain stress concentration. Focusing on the microearthquake seismicity around the Tokai district in central Japan, where a large interplate earthquake is feared to occur, we tried to identify such an area of locked subduction on the Philippine Sea plate, possibly related to the future earthquake. We investigated the microearthquake seismicity from various perspectives. First, the hypocenter distribution was analyzed to identify the extent of the locked area. The characteristic profile of the distribution was presumed to represent a stress concentrated area induced from the mechanical contact between both plates. The second approach is to interpret stress patterns reflected in focal mechanisms. The locked state was recognized and verified by a comparison of the P-axis distribution pattern with that expected from a model imaging a partially locked subduction. The third approach is to monitor the temporal change of the seismic wave spectrum. Analyzing predominant frequencies of P and S waves and monitoring their changes for a period of 10 years, we found a trend of gradual increase common to both waves. This means an increase of stress drop in microfracturings, and in its turn implies accumulation of stress around the focus area. The rate of the stress change converted from the frequency change was compared with the result derived from a numerical simulation. The simulation, performed on the basis of a constitutive friction law for a stick sliding on the plate interface, computed a changing rate of the maximum shear stress around the locked zone and showed its spatial variation along the subduction axis. Thus the simulated result indicated a certain compatibility with the observed one. Although ambiguities and uncertainties still exist in the study, all the results derived here seem to indicate an identical conclusion that the plate subduction is actually locked in this region at present. 相似文献
4.
5.
Takeshi Sagiya 《Pure and Applied Geophysics》2004,161(11-12):2327-2342
— I studied crustal deformation in the Kanto district, central Japan, based on continuous GPS data. Horizontal as well as vertical displacement rate demonstrate significant interaction between the landward Kanto block and the Philippine Sea plate. Although the subduction effect of the Pacific plate is not apparent, it is reasonable to consider the entire Kanto district is displaced westward due to the interaction with the Pacific plate. The GPS velocity data were inverted to estimate the slip deficit distribution on the Sagami Trough subduction zone. The result delineates a strongly coupled region on the plate interface, part of which corresponds to the 1923 Kanto earthquake. The strongly coupled region is located shallower than 20 km. In addition, the plate interaction is laterally heterogeneous even in the same depth range, implying thermal structure is not the only factor controlling interplate coupling. The GPS data also detected a silent earthquake event on the interface of the Philippine Sea slab east of the Boso Peninsula in the middle of May, 1996. The silent rupture propagated over a 50 km * 50 km wide area during about a week. The maximum slip was approximately 50 mm and the released seismic moment was 4.7*1018Nm (M w 6.4). There was a small seismicity triggered by this silent event. The silent slip was located in the peripheral of the strongly coupled area, suggesting that frictional properties and/or stress conditions are inhomogeneous on the plate boundary interface. 相似文献
6.
Nonuniform and Unsteady Sliding of a Plate Boundary in a Great Earthquake Cycle: A Numerical Simulation Using a Laboratory-derived Friction Law 总被引：1，自引：0，他引：1
—A numerical study is conducted to simulate complicated sliding behavior and earthquake activity on a subducting plate boundary. A 2-D model of a uniform elastic half-space with a semi-infinite thrust fault is set up, and the frictional stress prescribed by a rate- and state-dependent friction law is assumed to act on the plate boundary fault. Spatial nonuniformity of friction parameters representing rate-dependence of friction and of slip-dependence of friction are introduced in the model to obtain complicated sliding behavior in the numerical simulation. Analogs of great earthquakes that break the entire seismogenic plate boundary repeatedly occur at a constant time interval. Smaller events of seismic or aseismic sliding occur during a great earthquake cycle. Regions of rate-strengthening of friction and of a large characteristic distance in slip-dependence of friction behave as barriers or asperities. Rupture propagation is often arrested in such a region and a great earthquake occurs later when the region is broken. The variety of earthquake activity observed in many regions along real plate boundaries may be explained by similar nonuniformity in friction parameters. Conversely, the friction parameters on plate boundaries might be estimated from comparison of theoretical simulations with observations of earthquake activity. Simulation results indicate that spatiotemporal variation in stress due to aseismic sliding may play an important part in generating earthquakes. 相似文献
7.
—We classified tsunamigenic earthquakes in subduction zones into three types earth quakes at the plate interface (typical interplate events), earthquakes at the outer rise, within the subducting slab or overlying crust (intraplate events), and "tsunami earthquakes" that generate considerably larger tsunamis than expected from seismic waves. The depth range of a typical interplate earthquake source is 10–40km, controlled by temperature and other geological parameters. The slip distribution varies both with depth and along-strike. Recent examples show very different temporal change of slip distribution in the Aleutians and the Japan trench. The tsunamigenic coseismic slip of the 1957 Aleutian earthquake was concentrated on an asperity located in the western half of an aftershock zone 1200km long. This asperity ruptured again in the 1986 Andreanof Islands and 1996 Delarof Islands earthquakes. By contrast, the source of the 1994 Sanriku-oki earthquake corresponds to the low slip region of the previous interplate event, the 1968 Tokachi-oki earthquake. Tsunamis from intraplate earthquakes within the subducting slab can be at least as large as those from interplate earthquakes; tsunami hazard assessments must include such events. Similarity in macroseismic data from two southern Kuril earthquakes illustrates difficulty in distinguishing interplate and slab events on the basis of historical data such as felt reports and tsunami heights. Most moment release of tsunami earthquakes occurs in a narrow region near the trench, and the concentrated slip is responsible for the large tsunami. Numerical modeling of the 1996 Peru earthquake confirms this model, which has been proposed for other tsunami earthquakes, including 1896 Sanriku, 1946 Aleutian and 1992 Nicaragua. 相似文献
8.
Mireille Laigle Alfred Hirn Maria Sachpazi Christophe Clment 《Earth and Planetary Science Letters》2002,200(3-4):243-253
The western Hellenic arc has been commonly considered as a largely aseismic subduction zone, from the comparison of a small rate of shortening derived from the seismic moment release, with a large rate of convergence inferred from geology. Complete seismic coupling would instead be expected from models that consider a control by plate tectonic forces, because of the trenchward velocity of the Hellenic–Aegean upper plate now confirmed with GPS measurements. In the region of the Ionian Islands, a subduction interplate boundary has been recently imaged and its seismogenic downdip width suggested to be moderate, from reflection seismic profiling and local earthquake tomography. In the appropriate model for such an earthquake source region, which considers a single interplate fault and takes into account these features, the moderate seismic moment release is found consistent with complete seismic coupling of this subduction. The shallow downdip limit of the seismogenic zone can be interpreted as due to the interplate boundary being overlain there by the ductile deeper crust of the orogenically thickened Hellenides. 相似文献
9.
Chihiro Hashimoto Eiichi Fukuyama Mitsuhiro Matsu’ura 《Pure and Applied Geophysics》2014,171(8):1705-1728
The generation of interplate earthquakes can be regarded as a process of tectonic stress accumulation and release, driven by relative plate motion. We completed a physics-based simulation system for earthquake generation cycles at plate interfaces in the Japan region, where the Pacific plate is descending beneath the North American and Philippine Sea plates, and the Philippine Sea plate is descending beneath the North American and Eurasian plates. The system is composed of a quasi-static tectonic loading model and a dynamic rupture propagation model, developed on a realistic 3-D plate interface model. The driving force of the system is relative plate motion. In the quasi-static tectonic loading model, mechanical interaction at plate interfaces is rationally represented by the increase of tangential displacement discontinuity (fault slip) across them on the basis of dislocation theory for an elastic surface layer overlying Maxwell-type viscoelastic half-space. In the dynamic rupture propagation model, stress changes due to fault slip motion on non-planar plate interfaces are evaluated with the boundary integral equation method. The progress of seismic (dynamic) or aseismic (quasi-static) fault slip on plate interfaces is governed by a slip- and time-dependent fault constitutive law. As an example, we numerically simulated earthquake generation cycles at the source region of the 1968 Tokachi-oki earthquake on the North American-Pacific plate interface. From the numerical simulation, we can see that postseismic stress relaxation in the asthenosphere accelerates stress accumulation in the source region. When the stress state of the source region is close to a critical level, dynamic rupture is rapidly accelerated and develops over the whole source region. When the stress state is much lower than the critical level, the rupture is not accelerated. This means that the stress state realized by interseismic tectonic loading essentially controls the subsequent dynamic rupture process. 相似文献
10.
Zheng-Kang Shen 《Pure and Applied Geophysics》1995,145(3-4):561-577
A Newtonian fluid model is proposed to describe the oblique subduction of a planar 2-D slab. The slab is assumed to subduct in response to the ridge push force exerted along the trench, the slab pull force at the downdip of the slab, the gravitational body force within the slab, and the frictional resistance force at the upper surface of the slab. Because the slab motion along strike is being resisted by the frictional resistance at the interplate coupling area while the slab motion along the trench normal is being maintained by the gravitational pulling, the slab turns gradually toward the trench normal direction as it subducts. This model offers an alternative explanation for earthquake slip partitioning, the observation that the earthquake slip vectors deflect away from the relative plate motion direction toward the trench normal direction along most of the oblique subduction zones worldwide. Numerical models suggest that slip partitioning caused by slab deformation could be as much as 30% at 100 km downdip of the slab. The slab viscosity, the plate coupling width, the interplate resistance coefficient, the slab pull force, and the gravitational body force are all important in determining the geometry of the slab subduction. 相似文献
11.
Mitiyasu Ohnaka 《Pure and Applied Geophysics》1984,122(6):848-862
The Kanto earthquake (M=7.9) that occurred along the Sagami Trough in the Sagami Bay on 1 September 1923 was one of the most disastrous earthquakes in Japanese history. The Kanto area includes Metropolitan Tokyo and Yokohama which are densely populated, and hence it has been a matter of great concern, from the viewpoints of earthquake prediction and disaster prevention, whether or not the 1923 Kanto earthquake was preceded by precursory seismicity. A study using the most complete lists of earthquakes catalogued recently by Utsu and the Japan Meteorological Agency reveals that seismic activity in the Kanto area was appreciably higher before and after the Kanto earthquake, and that the Kanto earthquake was preceded by a sequence of anomalous seismic activity, quiescence, and foreshocks. Such higher activity before and after the Kanto earthquake is contrasted with low seismicity during the recent 30-year period. A model is proposed to explain the precursory seismic activity, subsequent quiescence, and foreshocks for the Kanto earthquake. In the model, the transition from precursory seismic activity to quiescence is ascribed to time-dependent fracture due to stress-aided corrosion. Foreshocks are related to an acceleration of premonitory slip shortly before the mainshock slip. 相似文献
12.
The paper discusses model results and then reviews observational data concerning some aspects of the mechanics of mature seismic gaps in coupled subduction zones. The concern is with space-and time-varying stresses, as signalled by the presence and mechanisms of earthquakes in the outer-rise zones adjacent to main thrust areas of large subduction events, and down-dip from such areas, in the downgoing slab. Observations are shown to be consistent with the expectation that in mature seismic gaps, as a result of interplate boundary locking in presence of sustained gravitational driving forces, at least the deeper portions of the ocean plate in the outer-rise zones are under increased compression, and the downgoing slab is under increased tension. The observational data cover two cases of closed seismic gaps, namely the region of the Chilean Valparaiso earthquake of March 3, 1985, and the earthquake of October 4, 1983. Four other cases concern still to-be-closed gaps in northern Chile and along the coast of Guatemala, and also the Kurile Islands Trench gap and the northern New Hebrides gap. It is concluded that the intermediate-term precursor, consisting of a combination of compressional outer-rise earthquake(s) and tensional intermediate-depth, intra-plate events in the downgoing slab, which mechanically signals the latter part of the earthquake cycle, could be useful in evaluating the maturity, and hence great earthquake potential of a seismic gap. 相似文献
13.
Interplate coupling plays an important role in the seismogenesis of great interplate earthquakes at subduction zones. The spatial and temporal variations of such coupling control the patterns of subduction zone seismicity. We calculate stresses in the outer rise based on a model of oceanic plate bending and coupling at the interplate contact, to quantitatively estimate the degree of interplate coupling for the Tonga, New Hebrides, Kurile, Kamchatka, and Marianas subduction zones. Depths and focal mechanisms of outer rise earthquakes are used to constrain the stress models. We perform waveform modeling of body waves from the GDSN network to obtain reliable focal depth estimates for 24 outer rise earthquakes. A propagator matrix technique is used to calculate outer rise stresses in a bending 2-D elastic plate floating on a weak mantle. The modeling of normal and tangential loads simulates the total vertical and shear forces acting on the subducting plate. We estimate the interplate coupling by searching for an optimal tangential load at the plate interface that causes the corresponding stress regime within the plate to best fit the earthquake mechanisms in depth and location.We find the estimated mean tangential load
over 125–200 km width ranging between 166 and 671 bars for Tonga, the New Hebrides, the Kuriles, and Kamchatka. This magnitude of the coupling stress is generally compatible with the predicted shear stress at the plate contact from thermal-mechanical plate models byMolnar andEngland (1990), andVan den Buekel andWortel (1988). The estimated tectonic coupling,F
tc
, is on the order of 1012–1013 N/m for all the subduction zones.F
tc
for Tonga and New Hebrides is about twice as high as in the Kurile and Kamchatka arcs. The corresponding earthquake coupling forceF
ec
appears to be 1–10% of the tectonic coupling from our estimates. There seems to be no definitive correlation of the degree of seismic coupling with the estimated tectonic coupling. We find that outer rise earthquakes in the Marianas can be modeled using zero tangential load. 相似文献
14.
Recent observations made by Kanamori and Allen about earthquake recurrence time and average stress drop revealed a very interesting relation: earthquakes with longer recurrence times have higher average stress drops. They attributed the difference in stress drop to the difference in long-term average slip rate. To interpret their result in terms of the healing effect, we simulated earthquake recurrence with a one-dimensional mass-spring model, incorporating a recently developed rate-and-state dependent friction law for different loading rates and heterogeneous strength distributions. We first calculated the stress drop and recurrence time as functions of loading rate for a homogenous fault model. We found that the stress drop increases up to 30% when the loading rate decreases from 10 cm/yr to 0.01 mm/yr. Thus, the observed great variability of stress drop, from a few bars to a few hundred bars, which is obtained by replotting the data of Kanamori and Allen in the form of stress drop versus long-term slip rate, may not be attributable to the healing effect alone. Our numerical simulation shows that the variability may be due primarily to the spatial heterogeneity of strength on the fault. Our simulation also suggests that of the two empirical laws that were inferred from the same laboratory friction data, called the power law and the logarithmic law by Shimamoto and Logan, the former can explain the observed relation between stress drop and slip rate better than can the latter, at least for strike-slip fault. The logarithmic law is an earlier and simpler version of the rate-state-dependent friction law. 相似文献
15.
THE SOURCE PARAMETERS AND RUPTURE PROCESS OF THE MW7.0 EARTHQUAKE IN ALASKA,USA ON DECEMBER 1, 2018 
下载免费PDF全文
下载免费PDF全文 XU Zhi-guo ZHANG Huai ZHOU Yuan-ze LIANG Shan-shan SU Zhe SHI Jian-yu ZHAO-Bo 《地震地质》2019,41(5):1223-1238
A magnitude MW7.0 earthquake struck north of Anchorage, Alaska, USA on 1 December 2018. This earthquake occurred in the Alaska-Aleutian subduction zone, on a fault within the subducting Pacific slab rather than on the shallower boundary between the Pacific and North American plates. In order to better understand the earthquake source characteristics and slip distribution of source rupture process as well as to explore the effect of tectonic environment on dynamic triggering of earthquake, the faulting geometry, slip distribution, seismic moment, source time function are estimated from broadband waveforms downloaded from IRIS Data Management Center. We use the regional broadband waveforms to infer the source parameters with ISOLA package and the teleseismic body wave recorded by stations of the Global Seismic Network is employed to conduct slip distribution inversion with iterative deconvolution method. The focal mechanism solution indicates that the Alaska earthquake occurred as the result of tensile-type normal faulting, the estimated centroid depth from waveform inversion shows that the earthquake occurred at the depth of 56.5km, and the centroid location is 10km far away in northeast direction relative to the location of initial epicenter. We use the aftershock distribution to constrain the fault-plane strike of a normal fault to set up the finite fault model, the finite fault inversion shows that the earthquake slip distribution is concentrated mainly on a rectangular area with 30km×20km, and the maximum slip is up to 3.6m. In addition, the slip distribution shows an asymmetrical distribution and the range of possible rupture direction, the direction of rupture extends to the northeast direction, which is same as that of aftershock distribution for a period of ten days after the mainshock. It is interesting to note that a seismic gap appears in the southwest of the seismogenic fault, we initially determined that the earthquake was a typical normal fault-type earthquake that occurred in the back-arc extensional environment of the subduction collision zone between the Pacific plate and the North American plate, this earthquake was not related to tectonic movement of faults near the Earth's surface. Due to the influence of high temperature and pressure during the subduction of the Pacific plate toward to the north, the subduction angle of the Pacific plate becomes steep, causing consequently the backward bending deformation, thus forming to a tensile environment at the trailing edge of the collision zone and generating the MW7.0 earthquake in Alaska. 相似文献
16.
Hidekuni Kuroki Hidemi M ItoAkio Yoshida 《Physics of the Earth and Planetary Interiors》2003,135(4):231-252
Using a 3D simulation model with a rate- and state-dependent friction law, Kuroki et al. (2002) discussed a process of a hypothetical great earthquake in the Tokai region, where the Philippine Sea plate subducts beneath the Eurasian plate. One of the main concerns was characteristic changes in volumetric strain and displacement on the ground surface which are caused by the evolution of the coupling between the two plates, i.e. evolution of a strongly coupled region between the plates which results in a preslip of the earthquake.In the present paper we discuss other observable phenomena which might help us to identify the stage of the coupling. The preslip of the earthquake could be more effectively detected by using full information about the change of strain rather than volumetric strain alone; the change in rotation angle of principal strain axes should amount to several tens of degrees while the order of the change in volumetric strain is 10−8 to 10−7 for 1 day before the earthquake. The spatial pattern of the displacement field on the ground surface provides us with information on the intermediate-term precursory changes in the plate coupling. Information given by micro-earthquakes is less direct. The seismicity should change considerably when a highly shear-stressed ring on the plate interface passes nearby, and ups and downs of seismicity rate will be estimated by Coulomb failure stress. On the other hand, focal mechanisms are rather insensitive to the progress of plate subduction. The changes may be not significant even at the time of the preslip. The interplate coupling yields a stress field that should produce reverse fault type mechanisms, but the stress field is modulated by a curved shape of the plate interface. Superposition of a regional tectonic stress to this field explains observed spatial distribution of focal mechanisms in the Tokai region which involve large strike-slip components. 相似文献
17.
—Spatial variations in mechanical properties of the interplate thrust faults along the Japan and Middle America subduction zones are examined using teleseismic broadband earthquake recordings. Moment-normalized source duration is used to probe rigidity variations along the interface. We invert body waves to estimate source depth and source duration for 40 events in the Japan subduction zone and 38 events in the Middle America subduction zone. For both areas, there is a systematic decrease in source duration with increasing depth along the subduction zone interface. This is most likely a result of variation in properties of sediments on the plate contact. Variations in source duration are greatly reduced at depths greater than 18 km in both regions. Enhanced spatial heterogeneity at shallow depth may reflect variations in plate roughness, sediment distribution, permeability of the fault zone, and stress. 相似文献
18.
Robert McCaffrey 《Pure and Applied Geophysics》1994,142(1):173-224
Deviations of slip vector azimuths of interplate thrust earthquakes from expected plate convergence directions at oblique subduction zones provide kinematic information about the deformation of forearcs and indirect evidence on the dynamics of the plate boundary. A global survey of slip vectors at major trenches of the world reveals a large variability in the kinematic response of forearcs to shear produced by oblique convergence. The variability in forearc deformation inferred from slip vector deflections is suggested to be caused by variations in forearc rheology rather than in the stresses acting on subduction zone thrust faults. Estimated apparent macroscopic rheologies range from elastic to perfectly plastic (or viscous). Forearc rheologies inferred from slip vectors do not correlate with age of the subducting lithosphere, but continental forearcs or old arcs appear to deform less than oceanic or young arcs. The inferred absence of forearc deformation at continental arcs from this study is counter to inferences drawn from compiled geologic information on forearc faults. Correlations of the apparent forearc rheology with backarc spreading, convergence rate, slab dip, arc curvature, and downdip length of the thrust contact are poor. However, great subduction zone earthquakes occur where forearcs are apparently more elastic (i.e., less deformed by oblique convergence), which suggests that the mechanical properties of forearcs rather than stress magnitude on thrust faults control both the kinematic behavior of forearcs and where great subduction zone earthquakes occur. 相似文献
19.
Kelin Wang 《Pure and Applied Geophysics》1995,145(3-4):537-559
Because of the viscoelastic behaviour of the earth, accumulation of elastic strain energy by tectonic loading and release of such energy by earthquake fault slips at subduction zones may take place on different spatial scales. If the lithospheric plate is acted upon by distant tectonic forces, strain accumulation must occur in a broad region. However, an earthquake releases strain only in a region comparable to the size of the rupture area. A two-dimensional finite-element model of a subduction zone with viscoelastic rheology has been used to investigate the coupling of tectonic loading and earthquake fault slips. A fault lock-and-unlock technique is employed so that the amount of fault slip in an earthquake is not prescribed, but determined by the accumulated stress. The amount of earthquake fault slip as a fraction of the total relative plate motion depends on the relative sizes of the earthquake rupture area and the region of tectonic strain accumulation, as well as the rheology of the rock material. The larger the region of strain accumulation is compared to the earthquake rupture, the smaller is the earthquake fault slip. The reason for the limited earthquake fault slip is that the elastic shear stress in the asthenosphere induced by the earthquake resists the elastic rebound of the overlying plate. Since rapid permanent plate shortening is not observed at subduction zones, there must be either strain release over a large region or strain accumulation over a small region over earthquake cycles. The former can be achieved only by significant aseismic fault slip between large subduction earthquakes. The most likely mechanism for the latter is the accumulation of elastic strain around isolated locked asperities of the fault, which requires significant aseismic fault slip between asperities. 相似文献
20.
在断层面上引入速率-状态相依摩擦本构关系、考虑铲形逆冲断层几何结构特征、断层下盘和上盘中下地壳及上地幔为黏弹性介质、上盘上地壳为弹塑性介质,本文用二维有限元动力学模型模拟了龙门山断层上大震准周期复发行为、分析了断层上地震孕育位置、地震周期不同阶段的应力/应变场演化特征.不同于近垂直走滑断层上的地震周期行为,大陆铲形逆冲断层上的构造应力的积累和释放过程更复杂、有其独特性.我们得到如下认识：（1）铲形逆冲断层上的地震复发是准周期行为.（2）龙门山断层最大库仑应力位于断层17~20 km深处,应力长期积累和同震释放都在此深度最大,说明地震会在此处孕育、发动.（3）在断层破裂的深部和浅部,同震滑动大小和构造应力释放大小并非同步,而是差异悬殊.（4）地震仅部分释放区域积累的应变能,断层上盘上地壳顶部和底部的褶皱、破裂等永久变形形式也是释放应变能的重要形式.（5）应变能密度增量的演化图像分为：震间、同震、震后期,清晰反应了龙门山断层附近的地震动力学过程.（6）地震发生除释放能量外,同时也对近断层的中地壳和断层底部有很大的应变能加载;这些加载,在震后期可能通过震后滑移、余震或中下地壳乃至上地幔的驰豫形变用几十年时间释放.以上对大陆内铲形逆冲断层上变形特征的了解,有助于我们在其地震周期行为中评估地震危险性. 相似文献