共查询到20条相似文献，搜索用时 296 毫秒
1.
Directional‐oriented wavefield imaging: a new wave‐based subsurface illumination imaging condition for reverse time migration 
下载免费PDF全文
下载免费PDF全文 The key objective of an imaging algorithm is to produce accurate and high‐resolution images of the subsurface geology. However, significant wavefield distortions occur due to wave propagation through complex structures and irregular acquisition geometries causing uneven wavefield illumination at the target. Therefore, conventional imaging conditions are unable to correctly compensate for variable illumination effects. We propose a generalised wave‐based imaging condition, which incorporates a weighting function based on energy illumination at each subsurface reflection and azimuth angles. Our proposed imaging kernel, named as the directional‐oriented wavefield imaging, compensates for illumination effects produced by possible surface obstructions during acquisition, sparse geometries employed in the field, and complex velocity models. An integral part of the directional‐oriented wavefield imaging condition is a methodology for applying down‐going/up‐going wavefield decomposition to both source and receiver extrapolated wavefields. This type of wavefield decomposition eliminates low‐frequency artefacts and scattering noise caused by the two‐way wave equation and can facilitate the robust estimation for energy fluxes of wavefields required for the seismic illumination analysis. Then, based on the estimation of the respective wavefield propagation vectors and associated directions, we evaluate the illumination energy for each subsurface location as a function of image depth point and subsurface azimuth and reflection angles. Thus, the final directional‐oriented wavefield imaging kernel is a cross‐correlation of the decomposed source and receiver wavefields weighted by the illuminated energy estimated at each depth location. The application of the directional‐oriented wavefield imaging condition can be employed during the generation of both depth‐stacked images and azimuth–reflection angle‐domain common image gathers. Numerical examples using synthetic and real data demonstrate that the new imaging condition can properly image complex wave paths and produce high‐fidelity depth sections. 相似文献
2.
3.
作为一种特殊的噪声,鬼波对一次波的波形及频带宽度产生极大的影响,鬼波压制是提高海上地震资料分辨率及保真度的重要因素.以格林公式为基础,详细论述了基于格林函数理论的鬼波压制方法,在不需要地下介质信息的条件下,进行地震数据驱动鬼波压制,并根据"Double Dirichlet"(双狄利克雷)边界条件,预测压力波场和垂直速度波场.建立了基于格林函数理论鬼波压制的处理流程,数值模拟和实际资料处理结果表明,基于格林函数理论鬼波压制方法在很好地去除鬼波的同时极大地拓宽了地震资料的频带,尤其提升了低频端能量,有利于后续资料的处理解释. 相似文献
4.
Topography and severe variations of near‐surface layers lead to travel‐time perturbations for the events in seismic exploration. Usually, these perturbations could be estimated and eliminated by refraction technology. The virtual refraction method is a relatively new technique for retrieval of refraction information from seismic records contaminated by noise. Based on the virtual refraction, this paper proposes super‐virtual refraction interferometry by cross‐correlation to retrieve refraction wavefields by summing the cross‐correlation of raw refraction wavefields and virtual refraction wavefields over all receivers located outside the retrieved source and receiver pair. This method can enhance refraction signal gradually as the source–receiver offset decreases. For further enhancement of refracted waves, a scheme of hybrid virtual refraction wavefields is applied by stacking of correlation‐type and convolution‐type super‐virtual refractions. Our new method does not need any information about the near‐surface velocity model, which can solve the problem of directly unmeasured virtual refraction energy from the virtual source at the surface, and extend the acquisition aperture to its maximum extent in raw seismic records. It can also reduce random noise influence in raw seismic records effectively and improve refracted waves’ signal‐to‐noise ratio by a factor proportional to the square root of the number of receivers positioned at stationary‐phase points, based on the improvement of virtual refraction's signal‐to‐noise ratio. Using results from synthetic and field data, we show that our new method is effective to retrieve refraction information from raw seismic records and improve the accuracy of first‐arrival picks. 相似文献
5.
Reverse-time migration has attracted more and more attention owing to the advantages of high imaging accuracy, no dip restriction, and adaptation to complex velocity models. Cross-correlation imaging method is typically used in conventional reverse-time migration that produces images with strong low-frequency noise. Wavefield decomposition imaging can suppress such noise; however, some residual noise persists in the imaging results. We propose a 2D multidirectional wavefield decomposition method based on the traditional wavefield decomposition method. First, source wavefields and receiver wavefields are separated into eight subwavefields, respectively. Second, cross-correlation imaging is applied to selected subwavefields to produce subimages. Finally, the subimages are stacked to generate the final image. Numerical examples suggest that the proposed method can eliminate the low-frequency noise effectively and produce high-quality imaging profiles. 相似文献
6.
双程波方程逆时深度偏移是复杂介质高精度成像的有效技术,但其结果中通常包含成像方法引起的噪音和假象,一般的滤波方法会破坏成像剖面上的振幅,其中的假象也会给后续地质解释带来困扰.将波场进行方向分解然后实现入射波与反射波的相关成像能够有效地消除这类成像噪音,并提高逆时偏移成像质量.波传播方向的分解通常在频率波数域实现,它会占用大量的存储和计算资源,不便于在沿时间外推的逆时深度偏移中应用.本文提出解析时间波场外推方法,可以在时间外推的每个时间片上实现波传播方向的显式分解,逆时深度偏移中利用分解后的炮检波场进行对应的相关运算,实现成像噪音和成像信号的分离.在模型和实际数据上的测试表明,相比于常规互相关逆时偏移成像结果,本文方法能够有效地消除低频成像噪音和特殊地质构造导致的成像假象. 相似文献
7.
The conventional reverse time migration of ground-penetrating radar data is implemented with the two-way wave equation. The cross-correlation result contains low-frequency noise and false images caused by improper wave paths. To eliminate low-frequency noise and improve the quality of the migration image, we propose to separate the left-up-going, left-down-going, right-up-going and right-down-going wavefield components in the forward- and backward-propagated wavefields based on the Hilbert transform. By applying the reverse time migration of ground-penetrating radar data with full wavefield decomposition based on the Hilbert transform, we obtain the reverse time migration images of different wavefield components and combine correct imaging conditions to generate complete migration images. The proposed method is tested on the synthetic ground-penetrating radar data of a tilt-interface model and a complex model. The migration results show that the imaging condition of different wavefield components can highlight the desired structures. We further discuss the reasons for incomplete images by reverse time migration with partial wavefields. Compared with the conventional reverse time migration methods for ground-penetrating radar data, low-frequency noise can be eliminated in images generated by the reverse time migration method with full wavefield decomposition based on the Hilbert transform. 相似文献
8.
基于Bregman迭代的复杂地震波场稀疏域插值方法 总被引：2，自引：1，他引：1
在地震勘探中,野外施工条件等因素使观测系统很难记录到完整的地震波场,因此,资料处理中的地震数据插值是一个重要的问题。尤其在复杂构造条件下,缺失的叠前地震数据给后续高精度处理带来严重的影响。压缩感知理论源于解决图像采集问题,主要包含信号的稀疏表征以及数学组合优化问题的求解,它为地震数据插值问题的求解提供了有效的解决方案。在应用压缩感知求解复杂地震波场的插值问题中,如何最佳化表征复杂地震波场以及快速准确的迭代算法是该理论应用的关键问题。Seislet变换是一个特殊针对地震波场表征的稀疏多尺度变换,该方法能有效地压缩地震波同相轴。同时,Bregman迭代算法在以稀疏表征为核心的压缩感知理论中,是一种有效的求解算法,通过选取适当的阈值参数,能够开发地震波动力学预测理论、图像处理变换方法和压缩感知反演算法相结合的地震数据插值方法。本文将地震数据插值问题纳入约束最优化问题,选取能够有效压缩复杂地震波场的OC-seislet稀疏变换,应用Bregman迭代方法求解压缩感知理论框架下的混合范数反问题,提出了Bregman迭代方法中固定阈值选取的H曲线方法,实现地震波场的快速、准确重建。理论模型和实际数据的处理结果验证了基于H曲线准则的Bregman迭代稀疏域插值方法可以有效地恢复复杂波场的缺失信息。 相似文献
9.
采用弹性波全波形反演方法精确重建深部金属矿多参数模型,建模过程采用基于地震照明的反演策略.首先给出基于照明理论的观测系统可视性定义,利用可视性分析构建新的目标函数,对反演目标可视性较高的炮检对接收到的地震记录在波场匹配时占有更高的权重,确保了参与反演计算中的地震数据的有效性;其次将给定观测系统对地下介质的弹性波场照明强度作为优化因子,根据地震波在波阻抗界面处的能量分配特点,自适应补偿波场能量分布和优化速度梯度,以提高弹性波全波形反演过程的稳定性和反演结果的精度.理论模型和金属矿模型反演试验结果表明,基于可视性分析和能量补偿的反演策略可以使弹性波全波形反演更快地收敛到目标函数的全局极小值,获得适用于金属矿高分辨率地震偏移成像的多参数模型. 相似文献
10.
The attenuation of seismic waves propagating in reservoirs can be obtained accurately from the data analysis of vertical seismic profile in terms of the quality-factor Q. The common methods usually use the downgoing wavefields in vertical seismic profile data. However, the downgoing wavefields consist of more than 90% energy of the spectrum of the vertical seismic profile data, making it difficult to estimate the viscoacoustic parameters accurately. Thus, a joint viscoacoustic waveform inversion of velocity and quality-factor is proposed based on the multi-objective functions and analysis of the difference between the results inverted from the separated upgoing and downgoing wavefields. A simple separating step is accomplished by the reflectivity method to obtain the individual wavefields in vertical seismic profile data, and then a joint inversion is carried out to make full use of the information of the individual wavefields and improve the convergence of viscoacoustic full-waveform inversion. The sensitivity analysis of the different wavefields to the velocity and quality-factor shows that the upgoing and downgoing wavefields contribute differently to the viscoacoustic parameters. A numerical example validates our method can improve the accuracy of viscoacoustic parameters compared with the direct inversion using full wavefield and the separate inversion using upgoing or downgoing wavefield. The application on real field data indicates our method can recover a reliable viscoacoustic model, which helps reservoir appraisal. 相似文献
11.
The utilization of the double focal transformation for sparse data representation and data reconstruction 下载免费PDF全文
下载免费PDF全文 In many cases, seismic measurements are coarsely sampled in at least one dimension. This leads to aliasing artefacts and therefore to problems in the subsequent processing steps. To avoid this, seismic data reconstruction can be applied in advance. The success and reliability of reconstruction methods are dependent on the assumptions they make on the data. In many cases, wavefields are assumed to (locally) have a linear space–time behaviour. However, field data are usually complex, with strongly curved events. Therefore, in this paper, we propose the double focal transformation as an efficient way for complex data reconstruction. Hereby, wavefield propagation is formulated as a transformation, where one‐way propagation operators are used as its basis functions. These wavefield operators can be based on a macro velocity model, which allows our method to use prior information in order to make the data decomposition more effective. The basic principle of the double focal transformation is to focus seismic energy along source and receiver coordinates simultaneously. The seismic data are represented by a number of localized events in the focal domain, whereas aliasing noise spreads out. By imposing a sparse solution in the focal domain, aliasing noise is suppressed, and data reconstruction beyond aliasing is achieved. To facilitate the process, only a few effective depth levels need to be included, preferably along the major boundaries in the data, from which the propagation operators can be calculated. Results on 2D and 3D synthetic data illustrate the method's virtues. Furthermore, seismic data reconstruction on a 2D field dataset with gaps and aliased source spacing demonstrates the strength of the double focal transformation, particularly for near‐offset reflections with strong curvature and for diffractions. 相似文献
12.
Xiaoxue Jiang Fan Zheng Haiqing Jia Jun Lin Hongyuan Yang 《Studia Geophysica et Geodaetica》2016,60(1):91-111
A time-domain hyperbolic Radon transform based method for separating multicomponent seismic data into P-P and P-SV wavefields is presented. This wavefield separation method isolates P-P and P-SV wavefields in the Radon panel due to their differences in slowness, and an inverse transform of only part of the data leads to separated wavefields. A problem of hyperbolic Radon transform is that it works in the time domain entailing the inversion of large operators which is prohibitively time-consuming. By applying the conjugate gradient algorithm during the inversion of hyperbolic Radon transform, the computational cost can be kept reasonably low for practical application. Synthetic data examples prove that P-P and P-SV wavefield separation by hyperbolic Radon transform produces more accurate separated wavefields compared with separation by high-resolution parabolic Radon transform, and the feasibility of the proposed separation scheme is also verified by a real field data example. 相似文献
13.
最小二乘逆时偏移(Least-Squares Reverse Time Migration,LSRTM)与常规偏移相比具有更高的成像分辨率、振幅保真性及均衡性等优势,是当前研究的热点之一.震源子波的估计直接影响LSRTM结果的好坏,在实际情况下考虑到震源子波的空变特性,其估计十分困难.为了消除子波对LSRTM结果的影响,本文发展了基于卷积目标泛函的不依赖子波LSRTM算法.目标泛函由观测记录卷积模拟记录的参考道以及模拟记录卷积观测记录的参考道组成,由于观测子波和模拟子波在目标泛函的两项中同时存在,从而消除了子波的影响.此外,常用的基于L2范数拟合的LSRTM算法对噪声非常敏感,尤其是当地震数据中含有异常值时,常规LSRTM无法得到满意的结果.Student′s t分布相比L2范数具有更好的稳健性,本文将其推广到不依赖子波LSRTM中,提升了算法的稳健性,最后通过理论模型及实际资料试算验证了算法的有效性和对复杂模型的适应性. 相似文献
14.
因为在逆时偏移中基于双程波动方程构建震源波场和检波器波场,所以在波场延拓过程中地震波遇到波阻抗界面时,背向发育的反射波会与正常传播的波场互相关产生较强振幅的低频噪声.这一特点使得以逆时偏移为基础的最小二乘偏移方法在梯度计算时同样存在着低频噪声的干扰,从而导致反演收敛的速度减慢.考虑到计算量和存储成本的因素,本文借助Poynting矢量良好的方向指示性实现波场的上下行波分离,并在早期迭代的梯度计算中只保留震源波场和检波器波场沿不同垂直方向传播的组分之间的互相关,有效避免了成像噪声的干扰,提高了算法收敛的速率.数值算例验证了方案的有效性. 相似文献
15.
Xiang-Yang Li 《Geophysical Prospecting》1997,45(1):39-64
The characteristic seismic response to an aligned-fracture system is shear-wave splitting, where the polarizations, time-delays and amplitudes of the split shear waves are related to the orientation and intensity of the fracture system. This offers the possibility of delineating fractured reservoirs and optimizing the development of the reservoirs using shear-wave data. However, such applications require carefully controlled amplitude processing to recover properly and preserve the reflections from the target zone. Here, an approach to this problem is suggested and is illustrated with field data. The proposed amplitude processing sequence contains a combination of conventional and specific shear-wave processing procedures. Assuming a four-component recording (two orthogonal horizontal sources recorded by two orthogonal horizontal receivers), the split shear waves can be simulated by an effective eigensystem, and a linear-transform technique (LTT) can be used to separate the recorded vector wavefield into two principal scalar wavefields representing the fast and slow split shear waves. Conventional scalar processing methods, designed for processing P-waves, including noise reduction and stacking procedures may be adapted to process the separated scalar wavefields. An overburden operator is then derived from and applied to the post-stacked scalar wavefields. A four-component seismic survey with three horizontal wells drilled nearby was selected to illustrate the processing sequence. The field data show that vector wavefield decomposition and overburden correction are essential for recovering the reflection amplitude information in the target zone. The variations in oil production in the three horizontal wells can be correlated with the variations in shear-wave time-delays and amplitudes, and with the variations in the azimuth angle between the horizontal well and the shear-wave polarization. Dim spots in amplitude variations can be correlated with local fracture swarms encountered by the horizontal wells. This reveals the potential of shear waves for fractured reservoir delineation. 相似文献
16.
逆时偏移方法利用双程波算子模拟波场的正向和反向传播,通常采用互相关成像条件获得偏移剖面,是一种高精度的成像方法.但是传统的互相关成像条件会在偏移结果中产生低频噪声;此外,如果偏移速度中存在剧烈速度变化还可能进一步产生偏移假象.为了提高逆时偏移的成像质量,可在成像过程中先对震源波场和检波点波场分别进行波场分离,然后选择合适的波场成分进行互相关成像.本文基于Hilbert变换,推导了可在偏移过程中进行上下行和左右行波场分离的高效波场分离公式以及相应的成像条件,结合Sigsbee 2B合成数据,给出了不同波场成分的互相关成像结果.数值算例结果表明,采用本文提出的高效波场分离算法以及合理的波场成分互相关成像条件可以获得高信噪比的成像结果. 相似文献
17.
在常规地震采集中,被动源地震波场往往被视为噪声而去除,这就造成了部分有用信息的丢失.在目标区进行主动源和被动源弹性波地震数据的多分量混合采集,并对两种数据进行联合应用,使其在照明和频带上优势互补,能显著提高成像和反演的质量.本文针对两种不同类型的主被动源混采地震数据,分别提出了相应的联合全波形反演方法.首先,针对主动源与瞬态被动源弹性波混采地震数据,为充分利用被动源对深部照明的优势,同时有效压制被动震源点附近的成像异常值,提出了基于动态随机组合的弹性波被动源照明补偿反演策略.然后,针对低频缺失主动源与背景噪声型被动源弹性波混采地震数据,为充分利用被动源波场携带的低频信息,并避免对被动源的定位和子波估计,提出了基于地震干涉与不依赖子波算法的弹性波主被动源串联反演策略.最后,分别将两种方法在Marmousi模型上进行反演测试.结果说明,综合利用主动源和被动源弹性波混采地震数据,不仅能增强深部弹性参数反演效果,还能更好地构建弹性参数模型的宏观结构,并有助于缓解常规弹性波全波形反演的跳周问题. 相似文献
18.
A marine source generates both a direct wavefield and a ghost wavefield. This is caused by the strong surface reflectivity, resulting in a blended source array, the blending process being natural. The two unblended response wavefields correspond to the real source at the actual location below the water level and to the ghost source at the mirrored location above the water level. As a consequence, deghosting becomes deblending (‘echo‐deblending’) and can be carried out with a deblending algorithm. In this paper we present source deghosting by an iterative deblending algorithm that properly includes the angle dependence of the ghost: It represents a closed‐loop, non‐causal solution. The proposed echo‐deblending algorithm is also applied to the detector deghosting problem. The detector cable may be slanted, and shot records may be generated by blended source arrays, the blending being created by simultaneous sources. Similar to surface‐related multiple elimination the method is independent of the complexity of the subsurface; only what happens at and near the surface is relevant. This means that the actual sea state may cause the reflection coefficient to become frequency dependent, and the water velocity may not be constant due to temporal and lateral variations in the pressure, temperature, and salinity. As a consequence, we propose that estimation of the actual ghost model should be part of the echo‐deblending algorithm. This is particularly true for source deghosting, where interaction of the source wavefield with the surface may be far from linear. The echo‐deblending theory also shows how multi‐level source acquisition and multi‐level streamer acquisition can be numerically simulated from standard acquisition data. The simulated multi‐level measurements increase the performance of the echo‐deblending process. The output of the echo‐deblending algorithm on the source side consists of two ghost‐free records: one generated by the real source at the actual location below the water level and one generated by the ghost source at the mirrored location above the water level. If we apply our algorithm at the detector side as well, we end up with four ghost‐free shot records. All these records are input to migration. Finally, we demonstrate that the proposed echo‐deblending algorithm is robust for background noise. 相似文献
19.
尽管叠前逆时偏移成像精度高,但仅针对单一纵波的成像也可能形成地下介质成像盲区,由于基于弹性波方程的逆时偏移成像可形成多波模式的成像数据,因此弹性波逆时偏移成像可提供更为丰富的地下构造信息.本文依据各向同性介质的一阶速度-应力方程组构建震源和检波点矢量波场,再利用Helmholtz分解提取纯纵波和纯横波波场,使用震源归一化的互相关成像条件获得纯波成像,避免了直接使用坐标分量成像而引起的纵横波串扰问题.针对转换波成像的极性反转问题,文中提出一种共炮域极性校正方法.为有效节约存储成本,也提出一种适用于弹性波逆时偏移的震源波场逆时重建方法,在震源波场正传过程中,仅保存PML边界内若干层的速度分量波场,进而逆时重建出所有分量的震源波场.本文分别对地堑模型和Marmousi2模型进行了弹性波逆时偏移成像测试,结果表明:所提出的共炮域极性校正方法正确有效,基于波场分离的弹性波逆时偏移成像的纯波数据能够对复杂地下构造准确成像. 相似文献
20.
A commercial marine seismic survey has been completed with the wavefield from the n-element (single guns and clusters) airgun array measured for every shot using an array of n + 2 near-field hydrophones, n of which were required to determine the source wavefield, the remaining two providing a check on the computation. The source wavefield is critical to the determination of the seismic wavelet for the extraction of reflection coefficients from seismic reflection data and for tying the data to wells. The wavefield generated by the full array of interacting airguns can be considered to be the superposition of n spherical pressure waves, or notional source signatures, the n hydrophone measurements providing a set of n simultaneous equations for each shot. The solution of the equations for the notional source signatures requires three ingredients: the geometry of the gun ports and near-field hydrophones; the sensitivity of each hydrophone recording channel; and the relative motion between the near-field hydrophones and the bubbles emitted by the guns. The geometry was measured on the back deck using a tape measure. A calibration data set was obtained at the approach to each line, in which each gun was fired on its own and the resulting wavefield was measured with the near-field hydrophones and recorded. The channel sensitivities, or conversion from pressure at the hydrophones to numbers on the tape, were found for each near-field hydrophone channel using the single gun calibration data, the measured geometry, and the peak pressure from each gun, known from the manufacturer’s calibration. The relative motion between the guns and hydrophones was obtained from the same calibration data set by minimizing the energy in the computed notional source signatures at the guns which did not fire. The full array data were then solved for the notional source signatures, and the pressure was computed at the two spare hydrophones and compared with the actual recordings. The rms errors were 5.3% and 2.8% and would have been smaller if the hydrophone channel sensitivities had been properly calibrated beforehand and if the movement of the guns with respect to the hydrophones had been more restricted. This comparison of the predicted and measured signatures at spare hydrophones can, in principle, be done on every shot and we recommend that this be implemented as a standard quality control procedure whenever it is desired to measure the wavefield of a marine seismic source. 相似文献