共查询到20条相似文献，搜索用时 31 毫秒
1.
常规陆上VSP(Vertical Seismic Profiling)勘探普遍采用纵波震源激发,三分量检波器接收,主要利用的是纵波和转换横波信息。已有的研究表明,炸药震源在井下激发、可控震源在地面垂向振动,均会产生较强的纯纵波和一定强度的纯横波;泊松比差别较大的分界面有利于形成较强的透射转换横波。本文通过对激发形成的纯横波和下行转换形成的横波进行对比分析,认为纯横波的主频往往低于纯纵波的主频,而下行转换横波的主频通常接近纵波的主频。本文分别对两个陆上纵波源零偏和非零偏VSP资料进行分析,结果表明这些资料中普遍存在纯横波,只是横波的强弱存在不同程度的变化。利用纵波源零偏VSP资料,可以获得横波速度信。最后对VSP纵波和横波联合应用前景进行了分析,应该充分利用纵波源VSP资料中的横波信息。 相似文献
2.
Multiple vertical fracture sets, possibly combined with horizontal fine layering, produce an equivalent medium of monoclinic symmetry with a horizontal symmetry plane. Although monoclinic models may be rather common for fractured formations, they have hardly been used in seismic methods of fracture detection due to the large number of independent elements in the stiffness tensor. Here, we show that multicomponent wide-azimuth reflection data (combined with known vertical velocity or reflector depth) or multi-azimuth walkaway VSP surveys provide enough information to invert for all but one anisotropic parameters of monoclinic media. In order to facilitate the inversion procedure, we introduce a Thomsen-style parametrization for monoclinic media that includes the vertical velocities of the P-wave and one of the split S-waves and a set of dimensionless anisotropic coefficients. Our notation, defined for the coordinate frame associated with the polarization directions of the vertically propagating shear waves, captures the combinations of the stiffnesses responsible for the normal-moveout (NMO) ellipses of all three pure modes. The first group of the anisotropic parameters contains seven coefficients (ε(1,2), δ(1,2,3) and γ(1,2)) analogous to those defined by Tsvankin for the higher-symmetry orthorhombic model. The parameters ε(1,2), δ(1,2) and γ(1,2) are primarily responsible for the pure-mode NMO velocities along the coordinate axes x1 and x2 (i.e. in the shear-wave polarization directions). The remaining coefficient δ(3) is not constrained by conventional-spread reflection traveltimes in a horizontal monoclinic layer. The second parameter group consists of the newly introduced coefficients ζ(1,2,3) which control the rotation of the P-, S1- and S2-wave NMO ellipses with respect to the horizontal coordinate axes. Misalignment of the P-wave NMO ellipse and shear-wave polarization directions was recently observed on field data by Pérez et al. Our parameter-estimation algorithm, based on NMO equations valid for any strength of the anisotropy, is designed to obtain anisotropic parameters of monoclinic media by inverting the vertical velocities and NMO ellipses of the P-, S1- and S2-waves. A Dix-type representation of the NMO velocity of mode-converted waves makes it possible to replace the pure shear modes in reflection surveys with the PS1- and PS2-waves. Numerical tests show that our method yields stable estimates of all relevant parameters for both a single layer and a horizontally stratified monoclinic medium. 相似文献
3.
The seismic motion in sediment-filled valleys due to incident SH-waves has been studied exhaustively. However, the response of such geologic structures to incident SV- and P-waves has not been studied as thoroughly. The response of a 2-D model of the valley of Caracas, Venezuela—a NS cross-section through the Palos Grandes district—to incident plane SV- and P-waves is investigated using the discrete wave number boundary element method. It is observed that the differences in the predictions of the 1-D and 2-D models are more pronounced for SV-waves than for SH-waves, especially when SV-waves are incident at (or near) the critical angle ic. The valley responds very strongly to the horizontally propagating P-wave (SP-wave) which is induced when SV-waves, incident at the critical angle, interact with the free surface of the half-space. However, the SP-wave, being a wave diffracted at a boundary, is likely to be sensitive to impedance contrasts, to the presence of other interfaces in the medium, and to the topography surrounding the valley. These aspects of the problem need further investigation. 相似文献
4.
Tilted transversely isotropic formations cause serious imaging distortions in active tectonic areas (e.g., fold‐and‐thrust belts) and in subsalt exploration. Here, we introduce a methodology for P‐wave prestack depth imaging in tilted transversely isotropic media that properly accounts for the tilt of the symmetry axis as well as for spatial velocity variations. For purposes of migration velocity analysis, the model is divided into blocks with constant values of the anisotropy parameters ε and δ and linearly varying symmetry‐direction velocity VP0 controlled by the vertical (kz) and lateral (kx) gradients. Since determination of tilt from P‐wave data is generally unstable, the symmetry axis is kept orthogonal to the reflectors in all trial velocity models. It is also assumed that the velocity VP0 is either known at the top of each block or remains continuous in the vertical direction. The velocity analysis algorithm estimates the velocity gradients kz and kx and the anisotropy parameters ε and δ in the layer‐stripping mode using a generalized version of the method introduced by Sarkar and Tsvankin for factorized transverse isotropy with a vertical symmetry axis. Synthetic tests for several models typical in exploration (a syncline, uptilted shale layers near a salt dome and a bending shale layer) confirm that if the symmetry‐axis direction is fixed and VP0 is known, the parameters kz, kx, ε and δ can be resolved from reflection data. It should be emphasized that estimation of ε in tilted transversely isotropic media requires using nonhyperbolic moveout for long offsets reaching at least twice the reflector depth. We also demonstrate that application of processing algorithms designed for a vertical symmetry axis to data from tilted transversely isotropic media may lead to significant misfocusing of reflectors and errors in parameter estimation, even when the tilt is moderate (30°). The ability of our velocity analysis algorithm to separate the anisotropy parameters from the velocity gradients can be also used in lithology discrimination and geologic interpretation of seismic data in complex areas. 相似文献
5.
The western part of the Bohemian Massif (West Bohemia/Vogtland region) is characteristic in the relatively frequent recurrence
of intraplate earthquake swarms and in other manifestations of past-to-recent geodynamic activity. In this study we derived
1D anisotropic qP-wave model of the upper crust in the seismogenic West Bohemia/Vogtland region by means of joint inversion
of two independent data sets - travel times from controlled shots and arrival times from local earthquakes extracted from
the WEBNET seismograms. We derived also simple 1-D P-wave and S-wave isotropic models. Reasons for deriving these models were:
(a) only simplified crustal velocity models, homogeneous half-space or 1D isotropic layered models of this region, have been
derived up to now and (b) a significant effective anisotropy of the upper crust in the region which was indicated recently
by S-wave splitting. Both our anisotropic qP-wave and isotropic P-and S-wave velocity models are constrained by four layers
with the constant velocity gradient. Weak anisotropy for P-waves is assumed. The isotropic model is represented by 9 parameters
and the anisotropic one is represented by 24 parameters. A new robust and effective optimization algorithm - isometric algorithm
- was used for the joint inversion. A two-step inversion algorithm was used. During the first step the isotropic P- and S-wave
velocity model was derived. In the second step, it was used as a background model and the parameters of anisotropy were sought.
Our 1D models are adequate for the upper crust in the West Bohemia/Vogtland swarm region up to a depth of 15 km. The qP-wave
velocity model shows 5% anisotropy, the minimum velocity in the horizontal direction corresponds to an azimuth of 170°. The
isotropic model indicates the VP/VS ratio variation with depth. The difference between the hypocentre locations based on the derived isotropic and anisotropic
models was found to be several hundreds of meters. 相似文献
6.
A layeredP- andS-wave velocity model is obtained for the Friuli seismic area using the arrival time data ofP- andS-waves from local earthquakes. A damped least-squares method is applied in the inversion.The data used are 994P-wave arrival times for 177 events which have epicenters in the region covered by the Friuli seismic network operated by Osservatorio Geofisico sperimentale (OGS) di Trieste, which are jointly inverted for the earthquake hypocenters andP-wave velocity model. TheS-wave velocity model is estimated on the basis of 978S-wave arrival times and the hypocenters obtained from theP-wave arrival time inversion. We also applied an approach thatP- andS-wave arrival time data are jointly used in the inversion (Roecker, 1982). The results show thatS-wave velocity structures obtained from the two methods are quite consistent, butP-wave velocity structures have obvious differences. This is apparent becauseP-waves are more sensitive to the hypocentral location thanS-waves, and the reading errors ofS-wave arrival times, which are much larger than those ofP-waves, bring large location errors in the joint inversion ofP- andS-wave arrival time. The synthetic data tests indicated that when the reading errors ofS-wave arrivals are larger than four times that ofP-wave arrivals, the method proposed in this paper seems more valid thanP- andS-wave data joint inversion. Most of the relocated events occurred in the depth range between 7 and 11 km, just above the biggest jump in velocity. This jump might be related to the detachment line hypothesized byCarulli et al. (1982). From the invertedP- andS-wave velocities, we obtain an average value 1.82 forV
p
/V
s
in the first 16 km depth. 相似文献
7.
8.
根据Chapman理论模型,在各向异性介质(如HTI介质)中,当入射角在0-45。范围内,慢横波会发生较大的衰减和频散,且对流体粘度敏感,而P波和快横波则比较小。对于沿裂隙法向传播的慢横波,其振幅受流体影响很大。因此,在P波响应对流体不敏感的情况下,可利用慢横波来获得裂隙型油气藏的流体信息。本文分析了胜利油田垦71地区三维三分量地震数据,检测出的慢横波振幅和旅行时异常与该区的测井资料十分吻合。分析结果还发现,与含油区相比,含水区会产生更高的横波分裂。在含水区,慢横波振幅会产生明显变化,而在含油区则几乎没有变化。 相似文献
9.
Michinori Asaka 《Geophysical Prospecting》2023,71(1):17-28
Pore-pressure depletion causes changes in the triaxial stress state. Pore-pressure depletion in a flat reservoir, for example, can be reasonably approximated as uniaxial compaction, in which the horizontal effective stress change is smaller than the vertical effective stress. Furthermore, the stress sensitivity of velocities can be angle-dependent. Therefore, time-lapse changes in reservoir elastic anisotropy are expected as a consequence of production, which can complicate the interpretation of the 4D seismic response. The anisotropic 4D seismic response caused by pore-pressure depletion was investigated using existing core velocity measurements. To make a direct comparison between the anisotropic 4D seismic response and the isotropic response based only on vertical velocities, pseudoisotropic elastic properties were utilized, and the two responses were compared in terms of a dynamic rock physics template. A comparison of the dynamic rock physics templates indicates that time-lapse changes in reservoir elastic anisotropy have a noticeable impact on the interpretation of 4D seismic data. Changes in anisotropy as a result of pore-pressure depletion cause a time-lapse amplitude variation with offset response as if there is a reduction in VP/VS (i.e., pseudoisotropic VP/VS decreases), although the vertical VP/VS increases. The impact of time-lapse changes in anisotropy on the amplitude variation with offset gradient was also investigated, and the time-lapse anisotropy was found to enhance changes in the amplitude variation with offset gradient for a given case. 相似文献
10.
纵横波波场分离是弹性波偏移方法的必要条件,通过纵横波成像的差异可以获取更多地下介质的信息.目前所用的纵横波波场分离方法多采用Helmholtz分解,这样得到的波场不仅物理意义发生了变化,振幅和相位也会发生改变.本文采用纵横波解耦的弹性波方程,将其应用于三维介质,对比分析了纵横波解耦方法相对传统Helmholtz分解方法在相位、振幅上的优势.将该解耦的波场分离方法应用于弹性波逆时偏移,能得到相位、振幅和物理意义不受改变的偏移结果.但是该解耦方法分离得到的纵横波波场均为矢量场,将该波场分离方法用于弹性波逆时偏移,还需要解决矢量场如何得到标量成像结果的问题.本文引入了Poynting矢量,通过Poynting矢量对矢量波场进行标量化,这样就能得到保振幅、相位,且无极性反转的标量PP和PS成像结果.同时针对S波Poynting矢量求取不准确的问题,采用拟S波应力场和S波速度场得到了更加准确的S波Poynting矢量.理论计算证明了本文采用的3D波场解耦的矢量波场分离方法的正确性和引入Poynting矢量对矢量波场进行标量成像的有效性. 相似文献
11.
Several parameters are needed to describe the converted-wave （C-wave） moveout in processing multi-component seismic data, because of asymmetric raypaths and anisotropy. As the number of parameters increases, the converted wave data processing and analysis becomes more complex. This paper develops a new moveout equation with two parameters for C-waves in vertical transverse isotropy （VTI） media. The two parameters are the C-wave stacking velocity （Vc2） and the squared velocity ratio （7v,i） between the horizontal P-wave velocity and C-wave stacking velocity. The new equation has fewer parameters, but retains the same applicability as previous ones. The applicability of the new equation and the accuracy of the parameter estimation are checked using model and real data. The form of the new equation is the same as that for layered isotropic media. The new equation can simplify the procedure for C-wave processing and parameter estimation in VTI media, and can be applied to real C-wave processing and interpretation. Accurate Vc2 and Yvti can be deduced from C-wave data alone using the double-scanning method, and the velocity ratio model is suitable for event matching between P- and C-wave data. 相似文献
12.
ＩｎｖｅｒｓｉｏｎｏｆｂｒｅａｋｏｕｔｄａｔａｆｒｏｍｉｎｃｌｉｎｅｄｂｏｒｅｈｏｌｅｓｆｏｒｓｔｒｅｓｓｓｔａｔｅｏｆｔｈｅｕｐｐｅｒｃｒｕｓｔｉｎＪｉｚｈｏｎｇ ｄｅｐｒｅｓｓｉｏｎＹＡＮ－ＸＩＡＮＧＹＵ（俞言祥）ａｎｄＺＨＯＮＧ－ＨＵＡＩＸＵ（... 相似文献
13.
Transverse isotropy with a vertical axis of symmetry is a common form of anisotropy in sedimentary basins, and it has a significant influence on the seismic amplitude variation with offset. Although exact solutions and approximations of the PP-wave reflection coefficient for the transversely isotropic media with vertical axis of symmetry have been explicitly studied, it is difficult to apply these equations to amplitude inversion, because more than three parameters need to be estimated, and such an inverse problem is highly ill-posed. In this paper, we propose a seismic amplitude inversion method for the transversely isotropic media with a vertical axis of symmetry based on a modified approximation of the reflection coefficient. This new approximation consists of only three model parameters: attribute A, the impedance (vertical phase velocity multiplied by bulk density); attribute B, shear modulus proportional to an anellipticity parameter (Thomsen's parameter ε−δ); and attribute C, the approximate horizontal P-wave phase velocity, which can be well estimated by using a Bayesian-framework-based inversion method. Using numerical tests we show that the derived approximation has similar accuracy to the existing linear approximation and much higher accuracy than isotropic approximations, especially at large angles of incidence and for strong anisotropy. The new inversion method is validated by using both synthetic data and field seismic data. We show that the inverted attributes are robust for shale-gas reservoir characterization: the shale formation can be discriminated from surrounding formations by using the crossplot of the attributes A and C, and then the gas-bearing shale can be identified through the combination of the attributes A and B. We then propose a rock-physics-based method and a stepwise-inversion-based method to estimate the P-wave anisotropy parameter (Thomsen's parameter ε). The latter is more suitable when subsurface media are strongly heterogeneous. The stepwise inversion produces a stable and accurate Thomsen's parameter ε, which is proved by using both synthetic and field data. 相似文献
14.
J. W. M. DANKBAAR 《Geophysical Prospecting》1983,31(6):873-887
A theoretical study is presented of the effect of source/receiver patterns with fixed phase difference on the radiation/receiving characteristics of the single elements of the pattern in linear elastic media. The radiation characteristic of two vertical vibrators in phase and in counterphase is investigated in detail. By introducing source/receiver patterns the characteristics become dependent on dimension of the pattern, frequency and angle of observation in the horizontal plane. The types of waves generated by source patterns are, independent of phase differences, equal to those generated by single sources. With two vertical vibrators in phase radiation of P-waves can be improved relative to that of SV-waves. With two vibrators in counterphase radiation of SV-waves in vertical directions is enhanced relative to that of P-waves; this may be a valuable method of SV-shear wave generation in exploration seismics. SV-wave amplitudes larger than P-wave amplitudes can be expected at angles larger than 5°–10° with the vertical. 相似文献
15.
High-frequency (≥2 Hz) Rayleigh wave phase velocities can be inverted to shear (S)-wave velocities for a layered earth model up to 30 m below the ground surface in many settings. Given S-wave velocity (VS), compressional (P)-wave velocity (VP), and Rayleigh wave phase velocities, it is feasible to solve for P-wave quality factor QP and S-wave quality factor QS in a layered earth model by inverting Rayleigh wave attenuation coefficients. Model results demonstrate the plausibility of inverting QS from Rayleigh wave attenuation coefficients. Contributions to the Rayleigh wave attenuation coefficients from QP cannot be ignored when Vs/VP reaches 0.45, which is not uncommon in near-surface settings. It is possible to invert QP from Rayleigh wave attenuation coefficients in some geological setting, a concept that differs from the common perception that Rayleigh wave attenuation coefficients are always far less sensitive to QP than to QS. Sixty-channel surface wave data were acquired in an Arizona desert. For a 10-layer model with a thickness of over 20 m, the data were first inverted to obtain S-wave velocities by the multichannel analysis of surface waves (MASW) method and then quality factors were determined by inverting attenuation coefficients. 相似文献
16.
A practical method is presented for determining three‐dimensional S‐wave velocity (VS) profile from microtremor measurements. Frequency–wave number (f–k) spectral analyses of microtremor array records are combined, for this purpose, with microtremor horizontal‐to‐vertical (H/V) spectral ratio techniques. To demonstrate the effectiveness of the proposed method, microtremor measurements using arrays of sensors were conducted at six sites in the city of Kushiro, Japan. The spectral analyses of the array records yield dispersion characteristics of Rayleigh waves and H/V spectra of surface waves, and joint inversion of these data results in VS profiles down to bedrock at the sites. Conventional microtremor measurements were performed at 230 stations within Kushiro city, resulting in the H/V spectra within the city. Three‐dimensional VS structure is then estimated from inversion of the H/V spectra with the VS values determined from the microtremor array data. This reveals three‐dimensional VS profile of Kushiro city, together with an unknown hidden valley that crosses the central part of the city. The estimated VS profile is consistent with available velocity logs and results of subsequent borings, indicating the effectiveness of the proposed method. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
17.
Jia-Jia Yang Xi-Wu Luan Bing-Shou He Gang Fang Jun Pan Wei-Min Ran Tao Jiang 《应用地球物理》2017,14(4):492-504
Angle-domain common-image gathers (ADCIGs) transformed from the shotdomain common-offset gathers are input to migration velocity analysis (MVA) and prestack inversion. ADCIGs are non-illusion prestack inversion gathers, and thus, accurate. We studied the extraction of elastic-wave ADCIGs based on amplitude-preserving elastic-wave reversetime migration for calculating the incidence angle of P-and S-waves at each image point and for different source locations. The P-and S-waves share the same incident angle, namely the incident angle of the source P-waves. The angle of incidence of the source P-wavefield was the difference between the source P-wave propagation angle and the reflector dips. The propagation angle of the source P-waves was obtained from the polarization vector of the decomposed P-waves. The reflectors’ normal direction angle was obtained using the complex wavenumber of the stacked reverse-time migration (RTM) images. The ADCIGs of P-and S-waves were obtained by rearranging the common-shot migration gathers based on the incident angle. We used a horizontally layered model, the graben medium model, and part of the Marmousi-II elastic model and field data to test the proposed algorithm. The results suggested that the proposed method can efficiently extract the P-and S-wave ADCIGs of the elastic-wave reverse-time migration, the P-and S-wave incident angle, and the angle-gather amplitude fidelity, and improve the MVA and prestack inversion. 相似文献
18.
本文研究了纵波垂直入射情况下两种介质分界面处的纵波反射和透射系数的频散特性,分界面上下两侧分别为层状双孔页岩介质和层状双孔砂岩介质.当纵波沿垂直于分界面的方向传播至分界面处时,会在上层双孔介质中产生三类反射纵波,在下层双孔介质中产生三类透射纵波.基于层状双孔介质的特性,给出了分界面处的六个边界条件.根据层状双孔介质的波动方程,利用平面波分析得到了纵波的反射和透射系数.结果表明：当多孔介质中存在流体时,纵波的反射和透射系数与频率相关,即存在频散现象.波致流体流动是造成纵波反射和透射系数频散的主要原因.此外,结果还表明局部流体流动引起地震频带内反射和透射系数的频散,宏观Biot流引起超声频带内反射和透射系数的频散.本文同时对岩石参数对反射和透射系数频散曲线的影响进行了研究. 相似文献
19.
It has been shown in the past that the interval-NMO velocity and the non-ellipticity parameter largely control the P-wave reflection time moveout of VTI media. To invert for these two parameters, one needs either reasonably large offsets, or some structure in the subsurface in combination with relatively mild lateral velocity variation.This paper deals with a simulation of an inversion approach, building on the assumption that accurately measured V
NMO, as defined by small offset asymptotics for a particular reflector, were available. Instead of such measurements we take synthetically computed data. First, an isotropic model is constructed which explains these V
NMO. Subsequently, residual moveout in common image gathers is modelled by ray tracing (replacing real data), along with its sensitivity for changes in the interval-NMO velocity and the non-ellipticity parameter under the constraint that V
NMO is preserved. This enables iterative updating of the non-ellipticity parameter and the interval-NMO velocity in a layer that can be laterally inhomogeneous.This approach is successfully applied for a mildly dipping reflector at the bottom of a layer with laterally varying medium parameters. With the exact V
NMO assumed to be given, lateral inhomogeneity and anisotropy can be distinguished for such a situation. However, for another example with a homogeneous VTI layer overlying a curved reflector with dip up to 30°, there appears to be an ambiguity which can be understood by theoretical analysis. Consistently with existing theory using the NMO-ellipse, the presented approach is successfully applied to the latter example if V
NMO in the strike direction is combined with residual moveout in dip direction. 相似文献
20.
利用基于Biot理论的孔隙弹性介质的高阶交错网格有限差分算法,模拟了具有随机分布特征的多种流体饱和岩石中声波在中心频率分别为25,50,75,100kHz时的声场特点. 对于一个由两种成分（气和水）饱和的岩石模型, 假设含不同流体的孔隙介质随机分布在不同的宏观区域,该区域尺度远小于计算的声波波长;组成模型的两种随机分布介质具有相同的固体骨架参数、渗透率和孔隙度,但分别被具有不同压缩性、密度和黏滞系数特性的水和气饱和. 计算和统计分析结果表明,在两种孔隙成分随机分布的部分饱和条件下纵波速度比较复杂,除骨架参数外,其变化主要依赖于中心频率、各种孔隙成分饱和度及饱和介质的速度. 比较该随机分布模型、Gassmann理论模型和White的“气包”模型,发现三种模型得到的纵波速度和衰减规律有较好的定性对应关系. 其次,按照这种随机计算模型的处理方法,本文还首次计算了一个三种流体成分充填饱和的例子,即岩石模型中的孔隙被水、油和气部分饱和,计算时保持模型含水饱和度不变而只改变含油和含气饱和度. 在这种计算条件下,纵波速度随中心频率呈增大的趋势但有起伏变化. 声场快照显示了各种转换波在多种孔隙成分充填（两种和三种孔隙成分）岩石中的声场特征,复杂的水-油-气界面的非均匀分布对声场有重要影响,纵波能量主要转换形成了较为复杂的多种慢纵波和横波. 相似文献