共查询到20条相似文献，搜索用时 31 毫秒
1.
Fractures in elastic media add compliance to a rock in the direction normal to the fracture strike. Therefore, elastic wave velocities in a fractured rock will vary as a function of the energy propagation direction relative to the orientation of the aligned fracture set. Anisotropic Thomson–Haskell matrix Rayleigh-wave equations for a vertically transverse isotropic media can be used to model surface-wave dispersion along the principal axes of a vertically fractured and transversely isotropic medium. Furthermore, a workflow combining first-break analysis and azimuthal anisotropic Rayleigh-wave inversion can be used to estimate P-wave and S-wave velocities, Thomsen's ε, and Thomsen's δ along the principal axes of the orthorhombic symmetry. In this work, linear slip theory is used to map our inversion results to the equivalent vertically fractured and transversely isotropic medium coefficients. We carried out this inversion on a synthetic example and a field example. The synthetic data example results show that joint estimation of S-wave velocities with Thomsen's parameters ε and δ along normal and parallel to the vertical fracture set is reliable and, when mapped to the corresponding vertically fractured and transversely isotropic medium, provides insight into the fracture compliances. When the inversion was carried out on the field data, results indicated that the fractured rock is more compliant in the azimuth normal to the visible fracture set orientation and that the in situ normal fracture compliance to tangential fracture compliance ratio is less than half, which implies some cementation may have occurred along the fractures. Such an observation has significant implications when modelling the transport properties of the rock and its strength. Both synthetic and field examples show the potential of azimuthal anisotropic Rayleigh-wave inversion as the method can be further expanded to a more general case where the vertical fracture set orientation is not known a priori. 相似文献
2.
Weak‐anisotropy approximation for P‐wave reflection coefficient at the boundary between two tilted transversely isotropic media 
下载免费PDF全文
下载免费PDF全文 Existing and commonly used in industry nowadays, closed‐form approximations for a P‐wave reflection coefficient in transversely isotropic media are restricted to cases of a vertical and a horizontal transverse isotropy. However, field observations confirm the widespread presence of rock beds and fracture sets tilted with respect to a reflection boundary. These situations can be described by means of the transverse isotropy with an arbitrary orientation of the symmetry axis, known as tilted transversely isotropic media. In order to study the influence of the anisotropy parameters and the orientation of the symmetry axis on P‐wave reflection amplitudes, a linearised 3D P‐wave reflection coefficient at a planar weak‐contrast interface separating two weakly anisotropic tilted tranversely isotropic half‐spaces is derived. The approximation is a function of the incidence phase angle, the anisotropy parameters, and symmetry axes tilt and azimuth angles in both media above and below the interface. The expression takes the form of the well‐known amplitude‐versus‐offset “Shuey‐type” equation and confirms that the influence of the tilt and the azimuth of the symmetry axis on the P‐wave reflection coefficient even for a weakly anisotropic medium is strong and cannot be neglected. There are no assumptions made on the symmetry‐axis orientation angles in both half‐spaces above and below the interface. The proposed approximation can be used for inversion for the model parameters, including the orientation of the symmetry axes. Obtained amplitude‐versus‐offset attributes converge to well‐known approximations for vertical and horizontal transverse isotropic media derived by Rüger in corresponding limits. Comparison with numerical solution demonstrates good accuracy. 相似文献
3.
Pure-mode wave propagation is important for applications ranging from imaging to avoiding parameter tradeoff in waveform inversion. Although seismic anisotropy is an elastic phenomenon, pseudo-acoustic approximations are routinely used to avoid the high computational cost and difficulty in decoupling wave modes to obtain interpretable seismic images. However, such approximations may result in inaccuracies in characterizing anisotropic wave propagation. We propose new pure-mode equations for P- and S-waves resulting in an artefact-free solution in transversely isotropic medium with a vertical symmetry axis. Our approximations are more accurate than other known approximations as they are not based on weak anisotropy assumptions. Therefore, the S-wave approximation can reproduce the group velocity triplications in strongly anisotropic media. The proposed approximations can be used for accurate modelling and imaging of pure P- and S-waves in transversely isotropic media. 相似文献
4.
Amir Abbas Babasafari Deva Prasad Ghosh Ahmed Mohammed Ahmed Salim Masoumeh Kordi 《Geophysical Prospecting》2020,68(8):2471-2493
Analysis of amplitude variation with offset is an essential step for reservoir characterization. For an accurate reservoir characterization, the amplitude obtained with an isotropic assumption of the reservoir must be corrected for the anisotropic effects. The objective is seismic anisotropic amplitude correction in an effective medium, and, to this end, values and signs of anisotropic parameter differences (Δδ and Δε) across the reflection interfaces are needed. These parameters can be identified by seismic and well log data. A new technique for anisotropic amplitude correction was developed to modify amplitude changes in seismic data in transversely isotropic media with a vertical axis of symmetry. The results show that characteristics of pre-stack seismic data, that is, amplitude variation with offset gradient, can be potentially related to the sign of anisotropic parameter differences (Δδ and Δε) between two layers of the reflection boundary. The proposed methodology is designed to attain a proper fit between modelled and observed amplitude variation with offset responses, after anisotropic correction, for all possible lithofacies at the reservoir boundary. We first estimate anisotropic parameters, that is, δ and ε, away from the wells through Backus averaging of elastic properties resulted from the first pass of isotropic pre-stack seismic inversion, on input data with no amplitude correction. Next, we estimate the anisotropic parameter differences at reflection interfaces (values and signs of Δδ and Δε). We then generate seismic angle gather data after anisotropic amplitude correction using Rüger's equation for the P-P reflection coefficient. The second pass of isotropic pre-stack seismic inversion is then performed on the amplitude-corrected data, and elastic properties are estimated. Final outcome demonstrates how introduced methodology helps to reduce the uncertainty of elastic property prediction. Pre-stack seismic inversion on amplitude-corrected seismic data results in more accurate elastic property prediction than what can be obtained from non-corrected data. Moreover, a new anisotropy attribute (ν) is presented for improvement of lithology identification. 相似文献
5.
Generalized non‐hyperbolic approximation for qP‐wave relative geometrical spreading in a layered transversely isotropic medium with a vertical symmetry axis 下载免费PDF全文
下载免费PDF全文 Compensation for geometrical spreading along the ray‐path is important in amplitude variation with offset analysis especially for not strongly attenuative media since it contributes to the seismic amplitude preservation. The P‐wave geometrical spreading factor is described by a non‐hyperbolic moveout approximation using the traveltime parameters that can be estimated from the velocity analysis. We extend the P‐wave relative geometrical spreading approximation from the rational form to the generalized non‐hyperbolic form in a transversely isotropic medium with a vertical symmetry axis. The acoustic approximation is used to reduce the number of parameters. The proposed generalized non‐hyperbolic approximation is developed with parameters defined by two rays: vertical and a reference rays. For numerical examples, we consider two choices for parameter selection by using two specific orientations for reference ray. We observe from the numerical tests that the proposed generalized non‐hyperbolic approximation gives more accurate results in both homogeneous and multi‐layered models than the rational counterpart. 相似文献
6.
Ilya Tsvankin 《Geophysical Prospecting》1997,45(3):479-512
The transversely isotropic (TI) model with a tilted axis of symmetry may be typical, for instance, for sediments near the flanks of salt domes. This work is devoted to an analysis of reflection moveout from horizontal and dipping reflectors in the symmetry plane of TI media that contains the symmetry axis. While for vertical and horizontal transverse isotropy zero-offset reflections exist for the full range of dips up to 90°, this is no longer the case for intermediate axis orientations. For typical homogeneous models with a symmetry axis tilted towards the reflector, wavefront distortions make it impossible to generate specular zero-offset reflected rays from steep interfaces. The ‘missing’ dipping planes can be imaged only in vertically inhomogeneous media by using turning waves. These unusual phenomena may have serious implications in salt imaging. In non-elliptical TI media, the tilt of the symmetry axis may have a drastic influence on normal-moveout (NMO) velocity from horizontal reflectors, as well as on the dependence of NMO velocity on the ray parameter p (the ‘dip-moveout (DMO) signature’). The DMO signature retains the same character as for vertical transverse isotropy only for near-vertical and near-horizontal orientation of the symmetry axis. The behaviour of NMO velocity rapidly changes if the symmetry axis is tilted away from the vertical, with a tilt of ±20° being almost sufficient to eliminate the influence of the anisotropy on the DMO signature. For larger tilt angles and typical positive values of the difference between the anisotropic parameters ε and δ, the NMO velocity increases with p more slowly than in homogeneous isotropic media; a dependence usually caused by a vertical velocity gradient. Dip-moveout processing for a wide range of tilt angles requires application of anisotropic DMO algorithms. The strong influence of the tilt angle on P-wave moveout can be used to constrain the tilt using P-wave NMO velocity in the plane that includes the symmetry axis. However, if the azimuth of the axis is unknown, the inversion for the axis orientation cannot be performed without a 3D analysis of reflection traveltimes on lines with different azimuthal directions. 相似文献
7.
Tilted transversely isotropic formations cause serious imaging distortions in active tectonic areas (e.g., fold‐and‐thrust belts) and in subsalt exploration. Here, we introduce a methodology for P‐wave prestack depth imaging in tilted transversely isotropic media that properly accounts for the tilt of the symmetry axis as well as for spatial velocity variations. For purposes of migration velocity analysis, the model is divided into blocks with constant values of the anisotropy parameters ε and δ and linearly varying symmetry‐direction velocity VP0 controlled by the vertical (kz) and lateral (kx) gradients. Since determination of tilt from P‐wave data is generally unstable, the symmetry axis is kept orthogonal to the reflectors in all trial velocity models. It is also assumed that the velocity VP0 is either known at the top of each block or remains continuous in the vertical direction. The velocity analysis algorithm estimates the velocity gradients kz and kx and the anisotropy parameters ε and δ in the layer‐stripping mode using a generalized version of the method introduced by Sarkar and Tsvankin for factorized transverse isotropy with a vertical symmetry axis. Synthetic tests for several models typical in exploration (a syncline, uptilted shale layers near a salt dome and a bending shale layer) confirm that if the symmetry‐axis direction is fixed and VP0 is known, the parameters kz, kx, ε and δ can be resolved from reflection data. It should be emphasized that estimation of ε in tilted transversely isotropic media requires using nonhyperbolic moveout for long offsets reaching at least twice the reflector depth. We also demonstrate that application of processing algorithms designed for a vertical symmetry axis to data from tilted transversely isotropic media may lead to significant misfocusing of reflectors and errors in parameter estimation, even when the tilt is moderate (30°). The ability of our velocity analysis algorithm to separate the anisotropy parameters from the velocity gradients can be also used in lithology discrimination and geologic interpretation of seismic data in complex areas. 相似文献
8.
9.
Characterizing the expressions of seismic waves in elastic anisotropic media depends on multiparameters. To reduce the complexity, decomposing the P-mode wave from elastic seismic data is an effective way to describe the considerably accurate kinematics with fewer parameters. The acoustic approximation for transversely isotropic media is widely used to obtain P-mode wave by setting the axial S-wave phase velocity to zero. However, the separated pure P-wave of this approach is coupled with undesired S-wave in anisotropic media called S-wave artefacts. To eliminate the S-wave artefacts in acoustic waves for anisotropic media, we set the vertical S-wave phase velocity as a function related to propagation directions. Then, we derive a pure P-wave equation in transversely isotropic media with a horizontal symmetry axis by introducing the expression of vertical S-wave phase velocity. The differential form of new expression for pure P-wave is reduced to second-order by inserting the expression of S-wave phase velocity as an auxiliary operator. The results of numerical simulation examples by finite difference illustrate the stability and accuracy of the derived pure P-wave equation. 相似文献
10.
The moveout approximations play an important role in seismic data processing. The standard hyperbolic moveout approximation is based on an elliptical background model with two velocities: vertical and normal moveout. We propose a new set of moveout approximations based on a perturbation series in terms of anellipticity parameters using the alternative elliptical background model defined by vertical and horizontal velocities. We start with a transversely isotropic medium with a vertical symmetry axis. Then, we extend this approach to a homogeneous orthorhombic medium. To define the perturbation coefficients for a new background, we solve the eikonal equation with horizontal velocities in transversely isotropic medium with a vertical symmetry axis and orthorhombic media. To stabilise the perturbation series and improve the accuracy, the Shanks transform is applied for all the cases. We select different parameterisations for both velocities and anellipticity parameters for an orthorhombic model. From the comparison in traveltime error, the new moveout approximations result in better accuracy comparing with the standard perturbation‐based methods and other approximations. 相似文献
11.
12.
In multi-parameter ray-based anisotropic migration/inversion, it is essential that we have an understanding of the scattering mechanism corresponding to parameter perturbations. Because the complex nonlinearity in the anisotropic inversion problem is intractable, the construction of true-amplitude linearized migration/inversion procedures is needed and important. By using the acoustic medium assumption for transversely isotropic media with a vertical axis of symmetry and representing the anisotropy with P-wave normal moveout velocity, Thomsen parameter δ and anelliptic parameter η, we formalize the linearized inverse scattering problem for three-dimensional pseudo-acoustic equations. Deploying the single-scattering approximation and an elliptically anisotropic background introduces a new linear integral operator that connects the discontinuous perturbation parameters with the multi-shot/multi-offset P-wave scattered data. We further apply the high-frequency asymptotic Green's function and its derivatives to the integral operator, and then the scattering pattern of each perturbation parameter can be explicitly presented. By naturally establishing a connection to generalized Radon transform, the pseudo-inverse of the integral operator can be solved by the generalized Radon transform inversion. In consideration of the structure of this pseudo-inverse operator, the computational implementation is done pointwise by shooting a fan of rays from the target imaging area towards the acquisition system. Results from two-dimensional numerical tests show amplitude-preserving images with high quality. 相似文献
13.
Anisotropy is often observed due to the thin layering or aligned micro‐structures, like small fractures. At the scale of cross‐well tomography, the anisotropic effects cannot be neglected. In this paper, we propose a method of full‐wave inversion for transversely isotropic media and we test its robustness against structured noisy data. Optimization inversion techniques based on a least‐square formalism are used. In this framework, analytical expressions of the misfit function gradient, based on the adjoint technique in the time domain, allow one to solve the inverse problem with a high number of parameters and for a completely heterogeneous medium. The wave propagation equation for transversely isotropic media with vertical symmetry axis is solved using the finite difference method on the cylindrical system of coordinates. This system allows one to model the 3D propagation in a 2D medium with a revolution symmetry. In case of approximately horizontal layering, this approximation is sufficient. The full‐wave inversion method is applied to a crosswell synthetic 2‐component (radial and vertical) dataset generated using a 2D model with three different anisotropic regions. Complex noise has been added to these synthetic observed data. This noise is Gaussian and has the same amplitude f?k spectrum as the data. Part of the noise is localized as a coda of arrivals, the other part is not localized. Five parameter fields are estimated, (vertical) P‐wave velocity, (vertical) S‐wave velocity, volumetric mass and the Thomsen anisotropic parameters epsilon and delta. Horizontal exponential correlations have been used. The results show that the full‐wave inversion of cross‐well data is relatively robust for high‐level noise even for second‐order parameters such as Thomsen epsilon and delta anisotropic parameters. 相似文献
14.
Tariq Alkhalifah 《Geophysical Prospecting》2016,64(2):505-513
While velocity contrasts are responsible for most of the events recorded in our data, the long wavelength behavior of the velocity model is responsible for the geometrical shape of these events. For isotropic acoustic materials, the wave dependency on the long (wave propagation) and short (scattering) wavelength velocity components is stationary with the propagation angle. On the other hand, in representing a transversely isotropic with a vertical symmetry axis medium with the normal moveout velocity, the anellepticity parameter η, the vertical scaling parameter δ, and the sensitivity of waves vary with the polar angle for both the long and short wavelength features of the anisotropic dimensionless medium parameters (δ and η). For horizontal reflectors at reasonable depths, the long wavelength features of the η model is reasonably constrained by the long offsets, whereas the short wavelength features produce very week reflections at even reasonable offsets. Thus, for surface acquired seismic data, we could mainly invert for smooth η responsible for the geometrical shape of reflections. On the other hand, while the δ long wavelength components mildly affects the recorded data, its short wavelength variations can produce reflections at even zero offset, with a behavior pattern synonymous to density. The lack of the long wavelength δ information will mildly effect focusing but will cause misplacement of events in depth. With low enough frequencies (very low), we may be able to recover the long wavelength δ using full waveform inversion. However, unlike velocity, the frequencies needed for that should be ultra‐low to produce long‐wavelength scattering‐based model information as δ perturbations do not exert scattering at large offsets. For a combination given by the horizontal velocity, η, and ε, the diving wave influence of η is absorbed by the horizontal velocity, severely limiting the η influence on the data and full waveform inversion. As a result, with a good smooth η estimation, for example, from tomography, we can focus the full waveform inversion to invert for only the horizontal velocity and maybe ε as a parameter to fit the amplitude. This is possibly the most practical parametrization for inversion of surface seismic data in transversely isotropic with vertical symmetry axis media. 相似文献
15.
In an acoustic transversely isotropic medium, there are two waves that propagate. One is the P-wave and another one is the S-wave (also known as S-wave artefact). This paper is devoted to analyse the S-wave in two-dimensional acoustic transversely isotropic media with a tilted symmetry axis. We derive the S-wave slowness surface and traveltime function in a homogeneous acoustic transversely isotropic medium with a tilted symmetry axis. The S-wave traveltime approximations in acoustic transversely isotropic media with a tilted symmetry axis can be mapped from the counterparts for acoustic transversely isotropic media with a vertical symmetry axis. We consider a layered two-dimensional acoustic transversely isotropic medium with a tilted symmetry axis to analyse the S-wave moveout. We also illustrate the behaviour of the moveout for reflected S-wave and converted waves. 相似文献
16.
On shear-wave triplication in transversely isotropic media 总被引：1，自引：0，他引：1
The exact solution to the problem of qSV triplication in homogenous transversely isotropic media has been long known, but the result is algebraically complex and is seldom applied in practice. We present an appropriate approximation (not assuming weak qSV-anisotropy) that simplifies the conditions for the onset of off-axis triplication as anisotropy is increased, identifying the anisotropy parameter σ as the controlling parameter. It follows that commonly reported surface-seismic P-wave move-out measurements imply that many formations in the earth's sedimentary crust support off-axis qSV triplications. For typical Vp/Vs velocity ratios and a horizontally stratified earth, however, off-axis qSV triplications appear to only occur for shear-wave incidence angles too far from the vertical to be sampled by surface-seismic converted-wave survey geometries. 相似文献
17.
James Gaiser 《Geophysical Prospecting》2019,67(9):2414-2431
Utilizing shear-wave (S-wave) data acquired with compressional waves (P-waves) is becoming more common as joint imaging and inversion techniques improve. Interest in S-waves radiated from vertical sources and buried explosives exploits conversion to P-waves as primary reflections (SP-waves) for reducing acquisition costs and for application to legacy data. However, recent investigations overstate the extent of SP-wave illumination and show isotropic processing results with narrow bandwidth frequency and wavenumber data. I demonstrate that illumination with SP-waves is limited in general to near vertical polar angles up to around 30° or 35° for VP/VS of 2 or 3, respectively. At greater angles, S-waves are typically in the P-wave evanescent range and cannot excite SP-wave reflections. Contrary to recent claims, these sources for P-wave do not radiate SH-waves polarized in horizontal planes in all azimuths. I show these properties for isotropic media with radiation expressions for amplitude derived in vector slowness coordinates. Also, I extend these expressions to transversely isotropic media with a vertical symmetry axis to show agreement with synthetic seismic data that only quasi SV-waves are radiated and become more narrowly focused towards 45°. Furthermore, in orthorhombic media, synthetic data show that fast S1- and slow S2-waves polarized parallel and perpendicular to fractures may appear as SV- and SH-waves. For the partially saturated fracture model studied here, S1-wave radiation has broader azimuthal illumination than slow S2-waves, which are more narrowly focused in azimuth. These produce SP-wave splitting signatures on vertical component reflection data that are nearly identical to PS-wave signatures on radial horizontal component data. Separating these fast and slow SP-waves is an additional processing challenge. 相似文献
18.
A new wave equation is derived for modelling viscoacoustic wave propagation in transversely isotropic media under acoustic transverse isotropy approximation. The formulas expressed by fractional Laplacian operators can well model the constant-Q (i.e. frequency-independent quality factor) attenuation, anisotropic attenuation, decoupled amplitude loss and velocity dispersion behaviours. The proposed viscoacoustic anisotropic equation can keep consistent velocity and attenuation anisotropy effects with that of qP-wave in the constant-Q viscoelastic anisotropic theory. For numerical simulations, the staggered-grid pseudo-spectral method is implemented to solve the velocity–stress formulation of wave equation in the time domain. The constant fractional-order Laplacian approximation method is used to cope with spatial variable-order fractional Laplacians for efficient modelling in heterogeneous velocity and Q media. Simulation results for a homogeneous model show the decoupling of velocity dispersion and amplitude loss effects of the constant-Q equation, and illustrate the influence of anisotropic attenuation on seismic wavefields. The modelling example of a layered model illustrates the accuracy of the constant fractional-order Laplacian approximation method. Finally, the Hess vertical transversely isotropic model is used to validate the applicability of the formulation and algorithm for heterogeneous media. 相似文献
19.
Simultaneous estimation of velocity gradients and anisotropic parameters from seismic reflection data is one of the main challenges in transversely isotropic media with a vertical symmetry axis migration velocity analysis. In migration velocity analysis, we usually construct the objective function using the l2 norm along with a linear conjugate gradient scheme to solve the inversion problem. Nevertheless, for seismic data this inversion scheme is not stable and may not converge in finite time. In order to ensure the uniform convergence of parameter inversion and improve the efficiency of migration velocity analysis, this paper develops a double parameterized regularization model and gives the corresponding algorithms. The model is based on the combination of the l2 norm and the non‐smooth l1 norm. For solving such an inversion problem, the quasi‐Newton method is utilized to make the iterative process stable, which can ensure the positive definiteness of the Hessian matrix. Numerical simulation indicates that this method allows fast convergence to the true model and simultaneously generates inversion results with a higher accuracy. Therefore, our proposed method is very promising for practical migration velocity analysis in anisotropic media. 相似文献
20.
Tariq Alkhalifah 《Geophysical Prospecting》2004,52(1):39-48
The azimuth moveout (AMO) operator in homogeneous transversely isotropic media with a vertical symmetry axis (VTI), as in isotropic media, has an overall skewed saddle shape. However, the AMO operator in anisotropic media is complicated; it includes, among other things, triplications at low angles. Even in weaker anisotropies, with the anisotropy parameter η= 0.1 (10% anisotropy), the AMO operator is considerably different from the isotropic operator, although free of triplications. The structure of the operator in VTI media (positive η) is stretched (has a wider aperture) compared with operators in isotropic media, with the amount of stretch being dependent on the strength of anisotropy. If the medium is both vertically inhomogeneous, i.e. the vertical velocity is a function of depth (v(z)), and anisotropic, which is a common combination in practical problems, the shape of the operator again differs from that for isotropic media. However, the difference in the AMO operator between the homogeneous and the v(z) cases, even for anisotropic media, is small. Stated simply, anisotropy influences the shape and aperture of the AMO operator far more than vertical inhomogeneity does. 相似文献