共查询到20条相似文献，搜索用时 15 毫秒
1.
S. Y. Wang S. W. Sloan S. G. Fityus D. V. Griffiths C. A. Tang 《Rock Mechanics and Rock Engineering》2013,46(5):1165-1182
Rock is a heterogeneous geological material. When rock is subjected to internal hydraulic pressure and external mechanical loading, the fluid flow properties will be altered by closing, opening, or other interaction of pre-existing weaknesses or by induced new fractures. Meanwhile, the pore pressure can influence the fracture behavior on both a local and global scale. A finite element model that can consider the coupled effects of seepage, damage and stress field in heterogeneous rock is described. First, two series of numerical tests in relatively homogeneous and heterogeneous rocks were performed to investigate the influence of pore pressure magnitude and gradient on initiation and propagation of tensile fractures. Second, to examine the initiation of hydraulic fractures and their subsequent propagation, a series of numerical simulations of the behavior of two injection holes inside a saturated rock mass are carried out. The rock is subjected to different initial in situ stress ratios and to an internal injection (pore) pressure at the two injection holes. Numerically, simulated results indicate that tensile fracture is strongly influenced by both pore pressure magnitude and pore pressure gradient. In addition, the heterogeneity of rock, the initial in situ stress ratio (K), the distance between two injection holes, and the difference of the pore pressure in the two injection holes all play important roles in the initiation and propagation of hydraulic fractures. At relatively close spacing and when the two principal stresses are of similar magnitude, the proximity of adjacent injection holes can cause fracturing to occur in a direction perpendicular to the maximum principal stress. 相似文献
2.
Rock formations in Glutenite reservoirs typically display highly variable lithology and permeability, low and complex porosity, and significant heterogeneity. It is difficult to predict the pathway of hydraulic fractures in such rock formations. To capture the complex hydraulic fractures in rock masses, a numerical code called Rock Failure Process Analysis (RFPA2D) is introduced. Based on the characteristics of a typical Glutenite reservoir in China, a series of 2D numerical simulations on the hydraulic fractures in a small-scale model are conducted. The initiation, propagation and associated stress evolution of the hydraulic fracture during the failure process, which cannot be observed in experimental tests, are numerically simulated. Based on the numerical results, the hydraulic fracturing path and features are illustrated and discussed in detail. The influence of the confining stress ratio, gravel sizes (indicated by the diameter variation), and gravel volume content (VC) on the hydraulic fracturing pattern in a conglomerate specimen are numerically investigated, and the breakdown pressure is quantified as a function of these variables. Five hydraulic fracturing modes are identified: termination, deflection, branching (bifurcation), penetration, and attraction. The propagation trajectory of the primary hydraulic fractures is determined by the maximum and minimum stress ratios, although the fracturing path on local scales is clearly influenced by the presence of gravels in the conglomerate, particularly when the gravels are relatively large. As the stress ratio increases, the fractures typically penetrate through the gravels completely rather than propagating around the gravels, and the breakdown pressure decreases with increasing stress ratio. Furthermore, the breakdown pressure is affected by the size and volume content of the gravel in the conglomerate: as the gravel size and volume content increase, the breakdown pressure increases. 相似文献
3.
砂砾岩水力压裂裂缝扩展规律的数值模拟分析 总被引：1，自引：0，他引：1
砂砾岩储层一般具有岩性和渗透性变化大、孔隙度低、连通性差、孔隙结构复杂和非均匀性严重等特点,因此,在水力压裂过程中,裂缝扩展形态难以控制,大规模改造难度大。针对国内某典型砂砾岩油藏特征,采用数值计算方法对砂砾岩压裂裂缝的扩展规律进行了研究,包括地应力场、砾石含量和粒径等对裂缝扩展形态及压裂压力的影响。研究表明,砾石的存在增加了压裂裂纹扩展的复杂性,裂纹主要有止裂、偏转、穿透和吸附4种表现模式,但主应力差严格控制着裂纹的走向,随着主应力差的增大,裂纹由总体绕砾扩展转变为总体穿砾扩展,失稳压力随着主应力差的增大而明显减小;砾石含量的多少体现了砂砾岩试样宏观的非均匀性,含量越高均匀性越差,随着砾石含量的提高,裂纹与砾石的相互作用占据主导地位,失稳压力随砾石含量的增加而增大;当砾石体积含量一定时,砾石粒径对压裂压力的影响主要取决于砾石排列的随机性,失稳压力随砾石粒径的增大而略有增大。 相似文献
4.
干热岩水压致裂过程中低温诱导热应力与注入水压共同影响裂缝的萌生与扩展。首先通过THM耦合分析了低温压裂液注入过程中注入水压与热应力的相互作用及其对裂缝萌生的影响,随后建立描述岩石细观结构的THMD耦合模型对热应力影响下高温岩石水压致裂过程进行初探。结果表明：低温压裂液注入高温岩石产生的热应力包括岩石自身温度梯度形成的热应力与岩石颗粒非均匀膨胀导致的热应力,并在井筒周围呈现为拉应力。高注入压力将抑制热应力导致的多裂缝萌生,井筒附近热应力的存在对注入压力也具有削弱作用。基岩温度升高,裂缝萌生阶段更多裂缝在井筒附近起裂,缝网沿最大地应力方向的扩展速度减慢,但改造规模增加,同时多裂缝的存在也使得裂缝延伸压力增加。 相似文献
5.
Onset of Hydraulic Fracture Initiation Monitored by Acoustic Emission and Volumetric Deformation Measurements 总被引：2，自引：1，他引：1
Sergey Stanchits Aniket Surdi Patrick Gathogo Eric Edelman Roberto Suarez-Rivera 《Rock Mechanics and Rock Engineering》2014,47(5):1521-1532
In this paper, the results of laboratory studies of fracture initiation, early propagation and breakdown are reported. Three experiments were conducted on a low permeability sandstone block, loaded in a polyaxial test frame, to representative effective in situ stress conditions. The blocks were instrumented with acoustic emission (AE) and volumetric deformation sensors. In two experiments, fluids of different viscosity were injected into the wellbore, fluid injection was interrupted soon after the breakdown pressure had been reached. This allowed us to investigate hydraulic fracture initiation. In the third test, fracture initiation criteria were applied to stop hydraulic fracture propagation significantly earlier, prior to breakdown, and as it propagated a short distance from the wellbore. The analysis of AE results shows an increase in AE activity and a change in the AE spatial correlation, during the fracture initiation. This early stage of fracturing correlates strongly with the onset of rock volumetric deformation, and is confirmed by the analysis of ultrasonic transmission monitoring. The rock microstructure, after the test, was investigated by analysis of scanning electron microscope images. These indicated the development of leak-off zone near the wellbore and a dry hydraulic fracture at the farther distance from the wellbore. 相似文献
6.
针对高角度天然裂缝发育地层中的水平井水力压裂问题,开展了水力裂缝自天然裂缝处起裂扩展的理论和试验研究。尝试将天然裂缝简化为与井筒轴线垂直的横向裂缝,基于线弹性断裂力学理论和最大拉应力准则,给出了水力裂缝起裂压力和扩展过程中应力强度因子的计算方法。利用预制横缝模拟高角度天然裂缝,开展了室内水力压裂试验,对水力裂缝的扩展形态和起裂压力进行了研究。理论计算表明,（1）水力裂缝自预制横缝端部起裂后,扩展距离超过1倍的预制横缝端部半径时可将预制横缝和水力裂缝合并起来,整体视作一条横向裂缝来计算应力强度因子;（2）水力裂缝尖端距井壁处的距离大于4倍的井筒半径时,应力强度因子的计算可忽略井筒的影响,近似采用硬币形裂缝的计算公式。试验研究发现,（1）水力裂缝在预制横缝端部起裂并扩展,形成与井筒轴线垂直的横向裂缝,裂缝的扩展呈现出Ⅰ型断裂的特点,形态近似呈圆形,未发现与井筒轴线平行的纵向裂缝的起裂和扩展;（2）排量对破裂净压力和起裂净压力有重要影响,大排量会导致较高的破裂净压力和起裂净压力,在大、小两种排量下起裂净压力的离散性均较小,计算得到的KⅠ临界断裂值的离散性也较小。研究结果可为改善裂缝发育储层的近井裂缝形态提供指导,也可为煤矿开采中预制横向切槽的水力压裂设计提供参考。 相似文献
7.
储层非均质性对水力压裂的影响 总被引：1，自引：0，他引：1
从岩石细观非均质性的特点出发,采用RFPA2D-Flow软件对单孔和双孔数值模型进行压裂计算,研究岩石非均质性对水力压裂的响应,重点探讨双孔模型孔间吸引效应对裂纹演化形态的影响。岩石细观单元的力学、水力学特性由统计分布生成以体现岩石的随机不均质性,水力压裂过程中流体压力传递通过单元渗流-损伤耦合迭代来实现。数值计算结果表明:(1)岩石非均质性影响裂缝的扩展形态,导致水力裂纹尖端微裂纹的分支。随着均质度的增加,水力裂纹的扩展形态变得更加平直光滑,单孔模型两侧裂纹更加对称,双孔间裂纹的连通性变差。(2)岩石的非均匀性对于岩石的起裂压力和地层破裂压力影响较大。随着均质度的增大,起裂应力和地层破裂应力增大,并且两者间的差值逐渐变小,在储层为均质的条件下,两者几乎相等。(3)相同的边界条件下,均质模型的应力分布曲线光滑连续,非均质模型的应力分布曲线呈现出明显波动,井眼对称剖面上的应力分布不尽相同,反映了细观单元强度非均匀性及裂缝扩展形态对应力分布的影响。(4)双孔模型孔间存在孔隙水压力增加带,孔间产生吸引效应,双孔方位影响临界压力。研究结果对水压裂试验设计和现场压裂施工具有一定的参考意义。 相似文献
8.
随着扩展有限元理论的深入研究,利用扩展有限元方法模拟水力压裂具有了一定的可操作性。相比于常规有限元方法,XFEM方法具有计算结果精度高和计算量小的优点。但是,如何模拟射孔孔眼、如何模拟流体与岩石相互作用以及分析水力裂缝的扩展规律仍然是难题。以研究水力压裂裂缝扩展规律为目的,建立了岩石多孔介质应力平衡方程、流体渗流连续性方程和边界条件。通过有限元离散化方法对耦合方程矩阵进行处理。通过富集函数定义初始裂缝（射孔孔眼）,选择最大主应力及损伤变量D分别作为裂缝起裂和扩展判定准则,利用水平集方法模拟水力裂缝扩展过程。数值模拟结果显示：增加射孔方位角、压裂液排量和减小水平地应力差,起裂压力上升;黏度对起裂压力无明显影响。增加射孔方位角、压裂液排量、黏度和减小水平地应力差值有助于裂缝宽度的增加。增加水平地应力差值、压裂液排量和减小射孔方位角以及压裂液黏度有助于裂缝长度增加,反之亦然。基于ABAQUS的水力裂缝扩展有限元法可对不同井型和诸多储层物性参数及压裂施工参数进行分析,且裂缝形态逼真,裂缝面凹凸程度清晰,结果准确。此研究可作为一种简便有效研究水力压裂裂缝扩展规律的方法为油田水力压裂设计与施工提供参考与依据。 相似文献
9.
水力压裂作为一种改造储层渗透性、压裂增产的技术,对页岩气开采具有重要意义。为研究射孔附近水力压裂过程中页岩各向异性特征对破裂压力及裂缝扩展的影响规律,开展了单轴试验条件下不同层理角度的页岩水力压裂试验。研究表明:页岩的破裂压力存在明显的各向异性,破裂压力随层理角度的分布曲线呈U型分布,其中0°和90°破裂压力最大,30°最小;页岩的破裂形态主要有两种,一种为沿着最大主应力方向即竖直方向起裂并延伸,另一种模式为裂缝先沿着最大主应力方向起裂并延伸,延伸过程中直接穿过层理面,随后渐渐转向为沿层理面方向扩展;破裂机制则包括拉张破坏和拉张剪切混合破坏。研究结果对于深入了解页岩裂缝起裂和延伸机理、水力压裂施工设计等具有重要的意义。 相似文献
10.
11.
水力压裂扩展特性的数值模拟研究 总被引：7，自引：0，他引：7
采用ABAQUS建立了水力压裂计算模型,模拟了地应力、岩石力学特性、压裂液流体特性等各种复杂因素对水力压裂扩展的影响。通过计算分析得到一些有益结论：（1）在注入压力一定的情况下起裂压力与最小水平地应力、临界应力、初始孔隙压力成正比,而与压裂液黏度、最大水平地应力、弹性模量无关;（2）裂缝扩展长度和最大缝宽与最小水平地应力、初始孔隙压力、弹性模量成反比,而与最大水平地应力无关;（3）水力压裂作业中,缝长的扩展过程可分为无扩展阶段、快速扩展阶段、稳定扩展阶段以及缓慢扩展阶段等4个阶段。研究结论对于水力压裂作业优化具有参考价值。 相似文献
12.
The propagation of hydraulic fracture in elastic rocks has widely been investigated. In the paper, we shall focus on numerical modeling of hydraulic fracturing in a class of porous rocks exhibiting plastic deformation. The plastic strain of porous rocks is described by a non-associated plastic model based on Drucker–Prager criterion. The plastic deformation is coupled with fluid pressure evolution described by the lubrication theory. An extended finite element method is used for modeling the propagation of fracture. The fracture propagation criterion is based on the J-integral. The proposed numerical model is validated by comparisons with numerical and analytical results. The influence of plastic deformation on fracture propagation process is investigated.
相似文献13.
水力压裂是青海共和盆地干热岩地热资源开发的难点技术问题之一。本文基于升级改造的大尺寸真三轴水力压裂物理模拟实验系统模拟干热岩储层高温高压环境,利用青海共和盆地露头岩心进行水力压裂物理模拟实验,揭示干热岩储层水力裂缝的起裂和扩展规律。通过物理模拟实验发现：干热岩储层裂缝起裂可以通过文中提出的起裂模型判断起裂方式和预测起裂压力;水力裂缝在岩石基质中的扩展形态简单,仅沿最大主应力方向延伸;但是水力裂缝会受到岩石中弱面的影响,发生转向沿弱面延伸,形成较复杂的裂缝形态。因此,建议在干热岩储层实际施工中,在天然裂缝发育较丰富的层段开展水力压裂,以实现复杂裂缝网络提取地热能。 相似文献
14.
危岩是三峡库区典型的地质灾害类型之一,而主控结构面受荷断裂扩展是危岩发育成灾的关键核心。将危岩主控结构面类比为宏观裂纹,利用扩展有限元法在模拟裂纹扩展方面的优势,基于考虑裂纹面水压力作用的虚功原理推导出了采用扩展有限元法分析水力劈裂问题的控制方程,给出了危岩主控结构面水力劈裂问题的扩展有限元实现方法,对重庆万州太白岩危岩主控结构面的水力劈裂进行了数值模拟分析。计算结果表明：暴雨是威胁危岩稳定性的最敏感因素,随着裂隙水压力上升,裂端拉应力会急剧升高,危岩的稳定性降低;I型裂纹扩展是危岩主要的结构面扩展形式,结构面一旦发生开裂,将处于非稳定扩展状态。 相似文献
15.
为研究水压致裂过程中水力裂缝的起裂、扩展规律及机制,研制了一种新型水压供给控制装置。该装置由水泵、增压泵、空气压缩机和导水钢垫板等组成。该装置的主要特点是易于与目前广泛存在的压力伺服机相配合,共同完成水压致裂试验,具有操作简便、效率高、成本低、组装方便等优点,使水压致裂试验更易大面积推广。利用该试验装置对类岩石试块进行了水压致裂试验,研究了不同围压下含预置裂隙试件的水力裂缝扩展规律,并与无预置裂隙试件水力裂缝扩展规律进行了对比。试验结果表明,对于含预置裂隙试块,当水平应力差较小时,预置裂隙裂尖对水力裂缝扩展影响较大,水力裂缝起裂后向预置裂隙裂尖方向扩展;随着水平应力差的增大,水力裂缝向最大水平应力方向偏转。试验证明该装置可靠性高,试验过程稳定。该研究对水压致裂试验具有促进意义。 相似文献
16.
In order to better understand opening-mode fracture initiation and propagation perpendicular to the bedding plane at depth in sedimentary rocks, a series of two-dimensional (2D) numerical simulations is conducted. First, the stress states between two adjacent fractures for a typical three-layer model with pre-assigned fractures are simulated. Second, the same three-layer model without pre-assigned fractures is adopted to study the initiation and propagation of fractures in layered rocks. Numerical results show that infilling fractures grow more easily from flaws located near the interface than from those in the middle of the fractured layer. Flaws can begin to propagate to form a complete infilling fracture when the size of the flaws exceeds half of the thickness of the central layer. Under different overburden stress conditions and internal fluid pressure, the numerically obtained ratio of the critical fracture spacing to layer thickness varies between 0.465 and 0.833. This range encompasses the often-cited ratios of spacing to layer thickness in the literature for well-developed fracture sets. In addition, both the fracture pattern and the critical value of the fracture spacing to layer thickness ratio are strongly dependent on the heterogeneous characteristics of the central layer. In cases with a relatively homogeneous central layer, more interface fractures occur, and the interface delamination evidently influences the fracture saturation. 相似文献
17.
Alastair Beach 《Journal of Structural Geology》1980,2(4):425-438
The hydraulic fracture is modelled as an ellipse in an infinite elastic medium with an internal fluid pressure and loaded under biaxial stresses at infinity. The available stress function for this model has been evaluated numerically, and the magnitudes of the stresses generated around the crack calculated for a variety of loading conditions and crack orientations. Fracture initiation is predicted from the Griffith maximum tensile stress criterion. The location of the maximum tensile stress around the crack is recorded and it is found that for many conditions of applied stresses and crack fluid pressure, the hydraulic shear fracture has a symmetrically developed maximum tensile stress and fracture initiation will occur by growth along the direction of the crack. It is also predicted that fracture initiation will occur when the ratio of fluid pressure to applied least principal stress is considerably less than one. The elastic strain energy fields around elliptical hydraulic flaws have been calculated, and in particular, the change in strain energy upon introduction of a small flaw, and the change in strain energy upon growth of this flaw, have been investigated. The results allow an evaluation of the second part of the Griffith criterion-that fracture growth is accompanied by a decrease in strain energy-for hydraulic fractures. Changes in strain energy with small increases in fluid pressure provide a physical basis for dilatancy hardening and fracture instability. Quasi-static growth from a flaw is modelled by calculating changes in strain energy for unit increases in half length. The distinction between fractures which show an increasing and a decreasing rate of change in strain energy with increasing length, and between fractures which may only extend spontaneously for short distances and those which may show extensive spontaneous growth on the basis of the rate of change of strain energy with length, is made. A gradual drop in crack fluid pressure once the threshold for fracture initiation has been passed may promote the extent to which spontaneous crack growth occurs.The formation of syntectonic veins, particularly in rocks being deformed under low grade metamorphic conditions, is often the most abundant evidence of natural hydraulic fracturing in rocks. Commonly observed geometric features of syntectonic veins-length, simple tapering, symmetric and asymmetric forking, branching, irregular zig-zag traces, en échelon patterns—are discussed primarily with reference to the strain energy model for growth established, and the geometric variation is interpreted in terms of variation in applied stress and fluid pressure conditions and the rate of change of stored strain energy with crack growth. In particular, terminal branching arises when the minimum stress changes from a symmetric to an asymmetric location at the tip of a growing shear fracture, and terminal forking results when there is an increase in the energy release rate during crack growth, and may be symmetric or asymmetric depending on the location of the minimum stress at the crack tip at the time of forking. 相似文献
18.
为了探究应力阴影效应对交替压裂中压裂间距选取的影响,基于优化后的颗粒流离散元流固耦合计算模型,模拟并分析了双初始水力裂缝下因应力阴影效应产生的诱导应力的分布情况,并与理论解析解进行对比,证明了该数值方法的合理性。在此基础上,分析了应力阴影效应在不同各向异性地应力场及初始压裂间距条件下对新水力裂缝的起裂压力及扩展形态的影响,研究结果表明：初始各向异性应力场不改变裂缝周边的应力场,不影响新水力裂缝的起裂压力;随着初始压裂间距的减小,应力阴影效应增强,新水力裂缝的起裂压力逐渐增加。初始水力裂缝间距与初始各向异性应力场共同影响新水力裂缝的扩展形态,随着初始水力裂缝间距或初始水平地应力场差异系数的增大,应力阴影对新水力裂缝的扩展方向的影响逐步减弱;初始水力裂缝对新水力裂缝的扩展有一定的限制作用,在一定程度上不利于形成复杂的裂缝网络。根据以上分析结果,对交替压裂中压裂间距的优化进行了定性的探讨。 相似文献
19.
超深储层地层起裂压力较高,水力压裂受现场泵注设备的限制严重,文中重点研究了大尺度水力压裂物模实验水泥样品尺寸（762 mm×762 mm×914 mm）在循环和常规两种泵注条件下的起裂扩展和声发射规律。实验结果显示,（1）相对于普通泵注,采用循环泵注方式进行水力压裂可以有效降低起裂压力,类似于单轴和三轴循环加载岩石力学行为,都是由于循环加载引起疲劳损伤;（2）对于螺旋射孔完井方式,水力压裂裂缝只从最薄弱射孔处起裂,一旦起裂后其他射孔孔眼很难再开启,水力压裂现场应合理选择分段距离和簇间距,实现储层改造效率最优化;（3）循环泵注水力压裂存在Kaiser效应（当加载应力到前次加载最高应力值时出现的声发射信息）。因孔隙流体扩散到岩石并导致孔隙压力的局部上升,破坏模式仍然可以由摩尔圆表示。研究成果对循环泵注条件的裂缝扩展规律研究以及发展新型压裂改造技术具有重要意义。 相似文献
20.
为了研究煤岩水力压裂的起裂压力和水力压裂裂缝扩展规律,采用型煤试样,利用自主研发的水力压裂实验系统,参照现场压裂施工制定了“施加三向应力-顶部注水”的煤岩水力压裂物理模拟实验方案并开展了水力压裂实验,分析了不同条件下泵注压力和水力压裂裂缝。实验结果表明:压裂液泵注排量越大,起裂压力越大。三向应力满足最大水平主应力σH > 垂向应力σv > 最小水平主应力σh,水力压裂裂缝沿着垂直于σh的方向扩展。σv和σh一定,随着σH的增大,煤岩起裂压力先增大后减小,水力压裂裂缝扩展路径越平直。当σH远大于σv和σh时,水力压裂裂缝扩展路径越复杂,分叉缝角度越大。研究结果可为煤岩水力压裂理论的完善提供一定的参考和借鉴。 相似文献