共查询到20条相似文献，搜索用时 31 毫秒
1.
Stability design of submarine pipelines is a very important procedure in submarine pipeline engineering design. The calculation of hydrodynamic forces caused by waves and currents acting on marine pipelines is an essential step in pipeline design for stability. The hydrodynamic forces-induced instabilities of submarine pipelines should be regarded as a wave/ current-pipeline-seabed interaction problem. This paper presents a review on hydrodynamic forces and stability research of submarine pipelines under waves and currents. The representative progress including the improved design method and guideline has been made for the marine pipelines engineering design through experimental investigations, numerical simulations and analytical models. Finally, further studies on this issue are suggested. 相似文献
2.
地下气库的围岩稳定性关系到地下气库的安全与使用。影响地下洞室稳定的因素很多,解析法虽然可以得到精确解,但是只能针对圆形洞室。而数值计算方法可以计算各种情况下围岩的应力、变形、塑性分布等情况。利用有限元分析软件分析了洞室形状对围岩稳定性的影响,确定了合理的洞形;讨论了围岩应力应变随深度的变化规律,以及不同的支护类型对围岩变形的影响,确定了经济合理的支护类型。最终为该地质条件下的洞室围岩稳定设计提供了依据。 相似文献
3.
An inverse hull design approach in minimizing the ship wave 总被引：1，自引：0，他引：1
The Levenberg–Marquardt Method (LMM) and a panel code for solving the wave-making problem are utilized in an inverse hull design problem for minimizing the wave of ships. A typical catamaran is selected as the example ship for the present study. The hull form of the catamaran is described by the B-spline surface method so that the shape of the hull can be completely specified using only a small number of parameters (i.e. control points). The technique of parameter estimation for the inverse design problem is thus chosen. The LMM of parameter estimation, which is the combination of steepest descent and Newton’s methods, has been proven to be a powerful tool for the inverse shape design problem. For this reason it is adopted in the present study.In the present studies, the inverse hull design method can not only be applied to estimate the hull form based on the known wave data of the target ship but can also be applied to estimate the unknown hull form based on the reduced wave height. The optimal hull forms of minimizing wave for a typical catamaran in deep water at service speed and at the critical speed of shallow water are estimated, respectively. Moreover, a new hull form with the combining feature of the optimal hull forms for deep water and shallow water is performing well under both conditions. The numerical simulation indicates that the hull form designed by inverse hull design method can reduce the ship wave significantly in comparison with the original hull form. 相似文献
4.
From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of pmax/γH0≤18. 相似文献
5.
波浪引起的海床不稳定性是海洋工程中需要考虑的重要问题。在对现有波致海床滑动稳定性计算方法进行分析的基础上,提出了一种波致海床滑动稳定性计算的全应力状态法,将其与现有计算方法进行了对比分析,并进一步研究了波致砂土海床和软土海床的滑动失稳特征。结果分析表明,全应力状态法在波致海床滑动稳定性分析中具有较好的适用性。对于砂土海床,其滑动稳定性受饱和度的影响较大,且当海床计算厚度约为0.2倍波长时对应的滑动深度最大。波浪作用下坡度不超过2°的均质软土海床,其最危险滑动面的位置仅与波长有关,其滑动深度约为0.21倍波长,滑动面半弦长约为0.33倍波长;海床表面的波压力数值只影响其安全系数的大小,而不影响其滑动深度。 相似文献
6.
护面是海堤和护岸的重要结构,直接抵御波浪作用,可采用人工块体、块石等,种类繁多。采用紧密排列方块石作为护面结构是一种景观性较好的型式,依据方块石厚度不同能抵御不同大小的波浪作用。干砌条石及干砌块石护面曾有一些规范给出过计算方法,但现行规范没有相关内容可供设计参考,已有计算方法的理论分析还存在不足。当波浪与斜坡堤相互作用时,方块石护面出现位移或脱落可能发生在波浪回落最低阶段、波浪破碎打击阶段及破后爬高水流作用阶段,通过研究得到了不同阶段波浪对方块石护面作用力的计算方法。在波浪回落最低阶段,考虑了护面及其下方垫层渗透性影响,通过理论分析建立了低渗透护面浮托压强计算模型,采用物模试验将计算结果与试验测量值进行了对比分析,结果表明总体趋势符合,量值接近;在波浪破碎冲击阶段,基于射流冲击作用原理,提出了波浪在斜坡面破碎冲击压强计算方法,通过试验分析了波浪破碎水深波高比与破波相似参数的关系,利用浅水波理论计算了波浪破碎冲击水流流速;在爬高水流作用阶段,提出了水流引起的方块石护面垂直浮托力及水平拖曳力的计算方法,通过试验结果拟合了浮托力系数和拖曳力系数,验证了水流作用下护面的受力特征。最后,针对方块... 相似文献
7.
The stability of a porous seabed under wave and current loadings is particularly important for engineers to design marine structures such as submarine pipelines, breakwaters, and offshore platform foundations. Most previous investigations of dynamic response of marine structures and seabed have only considered the influence of wave loading, but the important influence of current is ignored. Even if the influence of current is considered, the interaction mechanism of both loadings has not been clearly elaborated. Based on the Biot’s dynamic theory and combined two-dimensional nonlinear progressive wave and uniform current theory, the interaction mechanism of wave and current loadings and the influence of current on wave characteristic are analyzed by numerical computations. The influence of current velocity, different permeability, and stratification in seabed on the effective stresses and pore pressures of seabed is discussed in detail. Further, the stability of seabed is evaluated through the liquefaction analysis of seabed, which will provide important reference frames to improve the design and construction of marine structures. 相似文献
8.
From the laboratory experiments and field studies it has been shown that when a wave breaks directly on a vertical wall, impact pressures of high magnitude and short duration, are produced. Despite the recent advances made in collecting data on impact pressure histories and their spatial distributions, analyses on the structural behaviour of the walls loaded by the impact forces do not seem adequate. In the present study the theoretical analysis of the response characteristics of a caisson plate, having different aspect ratios, under the wave impact loading is investigated. Numerical results for the dynamic values of moments and transverse displacements are obtained by the method of finite elements. Some prerequisite experimental data for wave breaking and resulting impact pressures are provided. The static results for moments and deflections are also computed for comparing them with the dynamic values. The dynamic results are found significantly greater than the static values. The ratio between the dynamic and static values is called “Dynamic magnification factor” that varies with plate aspect ratio. Based on this factor a procedure is proposed which may have practical consequences in the design of caisson plates. 相似文献
9.
Sliding is one of the principal failure types of caisson breakwaters and is an essential content of stability examination in caisson breakwater design. Herein, the mass-spring-dashpot model of caisson-base system is used to simulate the vi-brating-sliding motion of the caisson under various types of breaking wave impact forces, i.e., single peak impact force, double peak impact force, and shock-damping oscillation impact force. The effects of various breaking wave impacts and the sliding motion on the dynamic response behaviors of caisson breakwaters are investigated and the calculation of relevant system parameters is discussed. It is shown that the dynamic responses of the caisson are significantly different under different types of breaking wave impact forces even when the amplitudes of impact forces are equal. The amplitude of dynamic response of the caisson is lower under single peak impact excitation than that under double peak impact or shock-damping oscillation impact excitation. Though the disp 相似文献
10.
Barstow S.F. Ueland G. Krogstad H.E. Fossum B.A. 《Oceanic Engineering, IEEE Journal of》1991,16(3):254-266
The authors describe Wavescan, a multipurpose data buoy specially designed for directional wave measurements and meteorological data collection. Their objective was to produce a second-generation high-capability metocean data buoy, with full in situ processing, real-time telemetry, and onshore result presentation. Emphasis is on the design of a buoy hull with the wave-following capability needed to accurately measure wave slope while at the same time retaining the stability to operate and collect meteorological data under the extreme conditions the buoy is likely to meet. The authors briefly review the advantages and disadvantages of the various buoy hulls that have been employed for collection of metocean data. The stability and dynamic response of the final design are then discussed, and results from a field test intercomparison during which a prototype buoy was deployed for several weeks off the mid-Norway shore are examined. The Wavescan system functions and the directional wave analysis are summarized. It is concluded that Wavescan has reached its design goals 相似文献
11.
Impact Analysis of Air Gap Motion with Respect to Parameters of Mooring System for Floating Platform
In this paper, the impact analysis of air gap concerning the parameters of mooring system for the semi-submersible platform is conducted. It is challenging to simulate the wave, current and wind loads of a platform based on a model test simultaneously. Furthermore, the dynamic equivalence between the truncated and full-depth mooring system is still a tuff work. However, the wind and current loads can be tested accurately in wind tunnel model. Furthermore, the wave can be simulated accurately in wave tank test. The full-scale mooring system and the all environment loads can be simulated accurately by using the numerical model based on the model tests simultaneously. In this paper, the air gap response of a floating platform is calculated based on the results of tunnel test and wave tank. Meanwhile, full-scale mooring system, the wind, wave and current load can be considered simultaneously. In addition, a numerical model of the platform is tuned and validated by ANSYS AQWA according to the model test results. With the support of the tuned numerical model, seventeen simulation cases about the presented platform are considered to study the wave, wind, and current loads simultaneously. Then, the impact analysis studies of air gap motion regarding the length, elasticity, and type of the mooring line are performed in the time domain under the beam wave, head wave, and oblique wave conditions. 相似文献
12.
It has been known that the axisymmetric Cauchy–Poisson problem for dispersive water waves is well posed in the sense of stability. Thereby time evolution solutions of wave propagation depend continuously on initial conditions. However, in this paper, it is demonstrated that the axisymmetric Cauchy–Poisson problem is ill posed in the sense of stability for a certain class of initial conditions, so that the propagating solutions do not depend continuously on the initial conditions. In order to overcome the difficulty of the discontinuity, Landweber–Fridman's regularization, famous and well known in applied mathematics, are introduced and investigated to learn whether it is applicable to the present axisymmetric wave propagation problem. From the numerical experiments, it is shown that stable and accurate solutions are realized by the regularization, so that it can be applicable to the determination of the ill-posed Cauchy–Poisson problem. 相似文献
13.
The interaction between solid structures and free-surface flows is investigated in this study. A Smoothed Particle Hydrodynamics (SPH) model is used in the investigation and is verified against analytical solutions and experimental observations. The main aim is to examine the effectiveness of a tsunami-resistant house design by predicting the wave loads on it. To achieve this, the solitary wave generation and run-up are studied first. The solitary wave is generated by allowing a heavily weighted block to penetrate into a tank of water at one end, and the near-shore seabed is modelled by an inclined section with a constant slope. Then, the SPH model is applied to simulate the three-dimensional flows around different types of houses under the action of a solitary wave. It has been found that the tsunami-resistant house design reduces the impact force by a factor of three. 相似文献
14.
When waves impact a seawall, a vertical breakwater, an exposed jetty, a pier or a coastal bridge, they abruptly transfer their momentum into the structure. This energy transfer can be very violent and its duration exceptionally short. In the case of coastal bridges, whose spans are designed to have very short vibration period, wave impacts might have duration comparable to the natural period of oscillation of the structure, which therefore becomes prone to damage and failure. Previous forensic studies have documented the relative importance of impulsive loads on deck suspended structure, demonstrating the need to assess the effect of wave impacts on both the stability and the integrity of structural members since the early stages of the design. This requires the estimation of the dynamic characteristics of the loading pattern, and in particular the wave impulse and corresponding impact maxima and rise times. Based on the conservation of momentum, functional relationships between these parameters have been identified since pioneering work dating back to the late '30s of the 20th century. The complexity of the loading process, however, results in a significantly large variability of wave impact maxima and rise times even under similar conditions, suggesting the need for a probabilistic approach to the definition of the relationship between these two variables, to be applied when estimating the dynamic properties of wave for use in structural analysis of coastal structures. In the recent past, some effort has been made to identify functional relationships between such quantities; these require the assessment of the conditional quantiles (or similarly the conditional distribution) of wave impact maxima given the rise times. In this paper, we compare three different statistical methods proposed in the literature to accomplish this task, in order to assess the reliability of the approach and suggest guidelines for practical applications. A copula-based method, Generalized Additive Models for Location, Scale and Shape (GAMLSS), and quantile regression are applied to measurements from large-scale 3-dimensional physical model tests. The investigation suggests that quantile regression gives the simplest results to be used in practice; copula approach and GAMLSS are possible alternative when semi-parametric or fully parametric modeling is needed. 相似文献
15.
概念性地设计了一种新型半潜式海上风力机基础,确定了结构的型式和尺寸,对风浪联合作用下不同工况的风力机基础稳性进行了校核.考虑黏性阻尼和二阶波浪力的作用,计算分析了风力机基础的水动力系数、幅频运动以及动力响应特性.结果表明,经过改进的新型风力机基础具有良好的稳性和水动力性能,特别是在垂荡性能上有大幅的提升.波浪入射角度对垂荡的影响不大,但对其他自由度RAOs影响较大.垂荡、横摇和纵摇RAOs均存在一个主峰值和次峰值,但峰值周期均远离波能集中区.此外还发现,不同工况下风浪入射角对风机系统的动力响应和系泊力均有较大影响,相对于工作工况,极端工况下所受风荷载较小,但是系泊力更大. 相似文献
16.
水位波动对临海重力式挡墙基坑稳定性的影响 总被引：1，自引：0，他引：1
近年来临海(江)建设的地下工程逐渐增多,与常规静水补给条件下的基坑工程相比,受波浪、潮汐等动水作用影响的基坑可能展现出不同的性状,对该类水力条件下基坑响应问题的研究具有重要的工程意义。依托港珠澳大桥珠海连接线拱北隧道海域段基坑工程,采用PLAXIS软件对波浪、潮汐作用下重力式挡墙两侧的水土压力、基坑的稳定性进行了探讨分析。结果表明,对于均质砂质地基上的重力式挡墙,当基坑距防波堤一定距离时,波浪对其稳定性的影响可以忽略不计;潮汐在海床和基坑中的传播有滞后效应,当潮汐为最高潮位时,基坑并非处于最危险状态;潮汐作用下临海重力式挡墙基坑的稳定性可以通过拟静水位法近似分析。 相似文献
17.
Together with new opportunities, offshore wind farms raise new engineering challenges. An important aspect relates to the erosion of bottom material around the foundation of the wind turbines, caused by the local increase of the wave and current induced flow velocities by the pile's presence. Typically, the expected scour has a considerable impact on the stability and dynamic behavior of the wind turbine and a scour protection is placed to avoid erosion of the soil close to the foundation. Although much experience exists on the design of scour protections around bridge piers (which are placed in a current alone situation), at present, little design guidelines exist for the specific case of a scour protection around a monopile foundation subjected to a combined wave and current loading. 相似文献
18.
19.
Sensitivity Analysis of Air Gap Motion with Respect to Wind Load and Mooring System for Semi-Submersible Platform Design 总被引：1，自引：1，他引：0
A design of semi-submersible platform is mainly based on the extreme response analysis due to the forces experienced by the components during lifetime. The external loads can induce the extreme air gap response and potential deck impact to the semi-submersible platform. It is important to predict air gap response of platforms accurately in order to check the strength of local structures which withstand the wave slamming due to negative air gap. The wind load cannot be simulated easily by model test in towing tank whereas it can be simulated accurately in wind tunnel test. Furthermore, full scale simulation of the mooring system in model test is still a tuff work especially the stiffness of the mooring system. Owing to the above mentioned problem, the model test results are not accurate enough for air gap evaluation. The aim of this paper is to present sensitivity analysis results of air gap motion with respect to the mooring system and wind load for the design of semi-submersible platform. Though the model test results are not suitable for the direct evaluation of air gap, they can be used as a good basis for tuning the radiation damping and viscous drag in numerical simulation. In the presented design example, a numerical model is tuned and validated by ANSYS AQWA based on the model test results with a simple 4 line symmetrical horizontal soft mooring system. According to the tuned numerical model, sensitivity analysis studies of air gap motion with respect to the mooring system and wind load are performed in time domain. Three mooring systems and five simulation cases about the presented platform are simulated based on the results of wind tunnel tests and sea-keeping tests. The sensitivity analysis results are valuable for the floating platform design. 相似文献