共查询到20条相似文献，搜索用时 62 毫秒
1.
Maaria Nordman Jaakko Kuokkanen Mirjam Bilker-Koivula Hannu Koivula Pasi Häkli Sonja Lahtinen 《Marine Geodesy》2013,36(5):457-476
AbstractWe studied geoid validation using ship-borne global navigation satellite systems (GNSS) on the Baltic Sea. We obtained geoid heights by combining GNSS–inertial measurement unit observations, tide gauge data, and a physical sea model. We used two different geoid models available for the area. The ship route was divided into lines and the lines were processed separately. The GNSS results were reduced to the sea surface using attitude and draft parameters available from the vessel during the campaign. For these lines, the residual errors between ellipsoidal height versus geoid height and absolute dynamic topography varied between 0 and 15?cm, grand mean being 2?cm. The mean standard deviations of the original time series were approximately 11?cm and reduced to below 5?cm for the time series filtered with 10?min moving average. We showed that it is possible to recover geoid heights from the GNSS observations at sea and validate existing geoid models in a well-controlled area. 相似文献
2.
Changes in the height of the ocean can be described through the relative and absolute sea level changes depending on the geodetic reference the sea level records are related to. Satellite altimetry provides absolute sea level (ASL) measurements related to the global geodetic reference, whereas tide gauges provide relative sea level (RSL) measurements related to the adjacent land. This study aims at computing the ASL surfaces for different time epochs from combined satellite altimeter and tide gauge records. A method of sea level data fusion is proposed to enable modeling of the impact of present and future sea level changes on the coast. Sea surface modeling was investigated for ten different gridding methods commonly used for the interpolation of altimeter data over the open ocean and extrapolation over the coastal zones. The performance of gridding methods was assessed based on the comparison of the gridded altimeter data and corrected tide gauge measurements. Finally, the sea level surfaces related to the GRS80 global reference ellipsoid were computed for the Mediterranean Sea over the altimeter period. In addition, the current sea level trends were estimated from both sea level measurements. 相似文献
3.
Robert E. Cheney Bruce C. Douglas David T. Sandwell James G. Marsh Thomas V. Martin John J. McCarthy 《Marine Geophysical Researches》1984,7(1-2):17-32
Satellite-borne altimeters have had a profound impact on geodesy, geophysics, and physical oceanography. To first order approximation,
profiles of sea surface height are equivalent to the geoid and are highly correlated with seafloor topography for wavelengths
less than 1000 km. Using all available Geos-3 and Seasat altimeter data, mean sea surfaces and geoid gradient maps have been
computed for the Bering Sea and the South Pacific. When enhanced using hill-shading techniques, these images reveal in graphic
detail the surface expression of seamounts, ridges, trenches, and fracture zones. Such maps are invaluable in oceanic regions
where bathymetric data are sparse. Superimposed on the static geoid topography is dynamic topography due to ocean circulation.
Temporal variability of dynamic height due to oceanic eddies can be determined from time series of repeated altimeter profiles.
Maps of sea height variability and eddy kinetic energy derived from Geos-3 and Seasat altimetry in some cases represent improvements
over those derived from standard oceanographic observations. Measurement of absolute dynamic height imposes stringent requirements
on geoid and orbit accuracies, although existing models and data have been used to derive surprisingly realistic global circulation
solutions. Further improvement will only be made when advances are made in geoid modeling and precision orbit determination.
In contrast, it appears that use of altimeter data to correct satellite orbits will enable observation of basin-scale sea
level variations of the type associated with climatic phenomena. 相似文献
4.
This article describes an “absolute” calibration of Jason-1 (J-1) altimeter sea surface height bias using a method developed for TOPEX/Poseidon (T/P) bias determination reported previously. The method makes use of U.K. tide gauges equipped with Global Positioning System (GPS) receivers to measure sea surface heights at the same time, and in the same geocentric reference frame, as Jason-1 altimetric heights recorded in the nearby ocean. The main time-dependent components of the observed altimeter-minus-gauge height-difference time series are due to the slightly different ocean tides at the gauge and in the ocean. The main harmonic coefficients of the tide differences are calculated from analysis of the copious TOPEX data set and then applied to the determination of T, P, and J-1 bias in turn. Datum connections between the tide gauge and altimetric sea surface heights are made by means of precise, local geoid differences from the EGG97 model. By these means, we have estimated Jason-1 altimeter bias determined from Geophysical Data Record (GDR) data for cycles 1–61 to be 12.9 cm, with an accuracy estimated to be approximately 3 cm on the basis of our earlier work. This J-1 bias value is in close agreement with those determined by other groups, which provides a further confirmation of the validity of our method and of its potential for application in other parts of the world where suitable tide gauge, GPS, and geoid information exist. 相似文献
5.
This article describes an “absolute” calibration of Jason-1 (J-1) altimeter sea surface height bias using a method developed for TOPEX/Poseidon (T/P) bias determination reported previously. The method makes use of U.K. tide gauges equipped with Global Positioning System (GPS) receivers to measure sea surface heights at the same time, and in the same geocentric reference frame, as Jason-1 altimetric heights recorded in the nearby ocean. The main time-dependent components of the observed altimeter-minus-gauge height-difference time series are due to the slightly different ocean tides at the gauge and in the ocean. The main harmonic coefficients of the tide differences are calculated from analysis of the copious TOPEX data set and then applied to the determination of T, P, and J-1 bias in turn. Datum connections between the tide gauge and altimetric sea surface heights are made by means of precise, local geoid differences from the EGG97 model. By these means, we have estimated Jason-1 altimeter bias determined from Geophysical Data Record (GDR) data for cycles 1-61 to be 12.9 cm, with an accuracy estimated to be approximately 3 cm on the basis of our earlier work. This J-1 bias value is in close agreement with those determined by other groups, which provides a further confirmation of the validity of our method and of its potential for application in other parts of the world where suitable tide gauge, GPS, and geoid information exist. 相似文献
6.
A New Methodology for Incorporating Tide Gauge Data in Sea Surface Topography Models 总被引：1，自引：0，他引：1
As part of the Vertical Offshore Reference Frames (VORF) project sponsored by the U. K. Hydrographic Office, a new model for Sea Surface Topography (SST) around the British Isles has been developed. For offshore areas (greater than 30 km from the coast), this model is largely derived from satellite altimetry. However, its accuracy and level of detail have been enhanced in coastal areas by the inclusion of not only the 60 PSMSL tide gauges with long-term records around the coasts of the United Kingdom and Ireland but also some 385 gauges established at different epochs and for different observation spans by the U. K. Admiralty. All tide gauge data were brought into a common reference frame by a combination of datum models and direct GPS observations, but a more significant challenge was to bring all short-term sea level observations to an unbiased value at a common epoch. This was achieved through developing a spatial-temporal correlation model for the variations in mean sea level around the British Isles, which in turn meant that gauges with long-term observation spans could be used as control points to improve the accuracy of Admiralty gauges. It is demonstrated that the latter can contribute point observations of mean sea level (MSL) with a precision of 0.078 m. A combination of least squares collocation and interpolation was developed to merge the coastal point and offshore gridded data sets, with particular algorithms having to be developed for different configurations of coastal topology. The resulting model of sea surface topography is shown to present a smooth transition from inshore coastal areas to offshore zones. Further benefits of the techniques developed include an enhanced methodology for detecting datum discontinuities at permanent tide gauges. 相似文献
7.
TAI Chang-Kou 《海洋学报(英文版)》2011,30(4):102-106
An attempt is made to infer the global mean sea level(GMSL) from a global tide gauge network and frame the problem in terms of the limitations of the network. The network,owing to its limited number of gauges and poor geographical distribution complicated further by unknown vertical land movements,is ill suited for measuring the GMSL. Yet it remains the only available source for deciphering the sea level rise over the last 100 a. The poor sampling characteristics of the tide gauge network have necessitated the usage of statistical inference. A linear optimal estimator based on the Gauss-Markov theorem seems well suited for the job. This still leaves a great deal of freedom in choosing the estimator. GMSL is poorly correlated with tide gauge measurements because the small uniform rise and fall of sea level are masked by the far larger regional signals. On the other hand,a regional mean sea level(RMSL) is much better correlated with the corresponding regional tide gauge measurements. Since the GMSL is simply the sum of RMSLs,the problem is transformed to one of estimating the RMSLs from regional tide gauge measurements. Specifically for the annual heating and cooling cycle,we separate the global ocean into 10-latitude bands and compute for each 10-latitude band the estimator that predicts its RMSL from tide gauges within. In the future,the statistical correlations are to be computed using satellite altimetry. However,as a first attempt,we have used numerical model outputs instead to isolate the problem so as not to get distracted by altimetry or tide gauge errors. That is,model outputs for sea level at tide gauge locations of the GLOSS network are taken as tide gauge measurements,and the RMSLs are computed from the model outputs. The results show an estimation error of approximately 2 mm versus an error of 2.7 cm if we simply average the tide gauge measurements to estimate the GMSL,caused by the much larger regional seasonal cycle and mesoscale variation plaguing the individual tide gauges. The numerical model,Los Alamos POP model Run 11 lasting 3 1/4 a,is one of the best eddy-resolving models and does a good job simulating the annual heating and cooling cycle,but it has no global or regional trend. Thus it has basically succeeded in estimating the seasonal cycle of the GMSL. This is still going to be the case even if we use the altimetry data because the RMSLs are dominated by the seasonal cycle in relatively short periods. For estimating the GMSL trend,longer records and low-pass filtering to isolate the statistical relations that are of interest. Here we have managed to avoid the much larger regional seasonal cycle plaguing individual tide gauges to get a fairly accurate estimate of the much smaller seasonal cycle in the GMSL so as to enhance the prospect of an accurate estimate of GMSL trend in short periods. One should reasonably expect to be able to do the same for longer periods during which tide gauges are plagued by much larger regional interannual(e. g.,ENSO events) and decadal sea level variations. In the future,with the availability of the satellite altimeter data,we could use the same approach adopted here to estimate the seasonal variations of GMSL and RMSL accurately and remove these seasonal variations accordingly so as to get a more accurate statistical inference between the tide gauge data and the RMSLs(therefore the GMSL) at periods longer than 1 a,i. e.,the long-term trend. 相似文献
8.
The Baltic Sea Level Project is an international scientific observation program to unify the vertical datums of the countries of the Baltic Sea with GPS measurements. In total, 35 tide gauges on shores and islands of the Baltic were occupied with GPS in 1993. After computing a new gravimetric geoid over the Baltic Sea, it was possible to unify the datums as well as to calculate the orthometric heights and the sea surface topography values for the tide gauge stations. The results obtained are shown. 相似文献
9.
Pascal Bonnefond Pierre Exertier Olivier Laurain Amandine Guillot Nicolas Picot Mathilde Cancet 《Marine Geodesy》2015,38(3):171-192
The geodetic Corsica site was set up in 1998 in order to perform altimeter calibration of the TOPEX/Poseidon (T/P) mission and subsequently, Jason-1 and OSTM/Jason-2. The scope of the site was widened in 2005 in order to undertake the calibration of the Envisat mission and most recently of SARAL/AltiKa. Here we present the first results from the latter mission using both indirect and direct calibration/validation approaches. The indirect approach utilizes a coastal tide gauge and, as a consequence, the altimeter derived sea surface height (SSH) needs to be corrected for the geoid slope. The direct approach utilizes a novel GPS-based system deployed offshore under the satellite ground track that permits a direct comparison with the altimeter derived SSH. The advantages and disadvantages of both systems (GPS-based and tide gauges) and methods (direct or indirect) will be described and discussed. Our results for O/IGD-R data show a very good consistency for these three kinds of products: their derived absolute SSH biases are consistent within 17 mm and their associated standard deviation ranges from 31 to 35 mm. The AltiKa absolute SSH bias derived from GPS-zodiac measurement using the direct method is ?54 ±10 mm based on the first 13 cycles. 相似文献
10.
Geodesists around the world have begun installing continuous GPS (CGPS) stations at tide gauges in order to determine the exact position of these tide gauges and, in particular, the vertical velocity of the land or the seafloor underlying each tide gauge. The goal is to make these measurements in a well-defined global reference frame. The scientific applications of these measurements include the calibration of satellite altimeters and the removal of crustal motion signals from long time series of sea level change. In this article we focus on the technical issues associated with this agenda, including site selection, instrumentation, monumentation, ancillary measurements, and the tide gauge leveling program. There is no universally best approach to building CGPS stations at tide gauges. Therefore we emphasize the various trade-offs that typically occur, and give general recommendations and rules of thumb based on recent installations and experience. Additional information can be found at the CGPS@TG website. 相似文献
11.
Technical Issues and Recommendations Related to the Installation of Continuous GPS Stations at Tide Gauges 总被引：1，自引：0，他引：1
Geodesists around the world have begun installing continuous GPS (CGPS) stations at tide gauges in order to determine the exact position of these tide gauges and, in particular, the vertical velocity of the land or the seafloor underlying each tide gauge. The goal is to make these measurements in a well-defined global reference frame. The scientific applications of these measurements include the calibration of satellite altimeters and the removal of crustal motion signals from long time series of sea level change. In this article we focus on the technical issues associated with this agenda, including site selection, instrumentation, monumentation, ancillary measurements, and the tide gauge leveling program. There is no universally best approach to building CGPS stations at tide gauges. Therefore we emphasize the various trade-offs that typically occur, and give general recommendations and rules of thumb based on recent installations and experience. Additional information can be found at the CGPS@TG website. 相似文献
12.
The response of an eddy-permitting ocean model to changes imposed by the use of different mean dynamic topographies (MDT) is analyzed in a multivariate assimilation context, allowing the evaluation of this impact, not only on the surface circulation, but also on the interior ocean representation. The assimilation scheme is a reduced-order sequential Kalman filter (SEEK). In a first set of experiments, high resolution sea surface temperature, along-track sea surface height and sea surface salinity from climatology are assimilated into a 1/3° resolution North and Tropical Atlantic version of the HYCOM model. In a second experiment, in situ profile data are assimilated in addition to the surface measurements. The first set of experiments illustrates that important differences in the representation of the horizontal model circulation pattern are related to differences in the MDT used. The objective of assimilation is to improve the representation of the 3D ocean state. However, the imperfect representation of the mean dynamic topography appears to be an important limiting factor with regard to the degree of realism obtained in the simulated flow. Vertical temperature and salinity profiles are key observations to drive a general circulation ocean model toward a more realistic state. The second set of experiments shows that assimilating them in addition to sea surface measurements is a far from trivial exercise. A specific difficulty is due to inconsistencies between the dynamic topography diagnosed from in situ observations and that diagnosed from sea surface height. These two fields obtained from different data sources do not contain exactly the same information. In order to overcome this difficulty, a strategy is proposed and validated. 相似文献
13.
Andreas Richter Marta Marcos Sebastià Monserrat Damià Gomis Simon Ruiz Gunter Liebsch 《Marine Geodesy》2013,36(4):271-289
Two sea-level records, spanning eight months of simultaneous data in 2002, have been derived from pressure tide gauge measurements at Sant Antoni harbor (Eivissa Island, Western Mediterranean) and off Es Vedrà island, 15 km SW from Sant Antoni. The two time series are compared and used to characterize the sea-level variability in the Balearic Sea. The main forcings for the observed variations, astronomic tides, and meteorologic forcing by the inverse barometer effect are quantified. In a further step, an amplitude transfer function is determined, reflecting the frequency dependent amplification or damping of the nontidal sea-level residuals between both locations due to their local topography. The interpretation of the obtained transfer function indicates sea-level modulating topographic specifics not only for the coastal record at Sant Antoni, but also at the Es Vedrà site. In general, the application of such a transfer function allows the prediction of off-shore sea-level variations from coastal tide gauge measurements. In the present study, ellipsoidal sea-surface heights for Es Vedrà are inferred from Sant Antoni tide gauge data with an accuracy of about 1.5 cm by applying the determined transfer function and a geoid model. 相似文献
14.
Abstract A project was initiated in 1986 to investigate an apparent significant discrepancy between geodetic and oceanographic leveling determinations of mean sea level around the coast of Great Britain. In oceanographic terms this discrepancy is equivalent to a sea slope in a North‐South direction. The project, which lasted for 3 years, has been carried out in conjunction with research groups at the University of Edinburgh, the Proudman Oceanographic Laboratory, and the Ordnance Survey of Great Britain. It has involved combining Global Positioning System (GPS)‐derived ellipsoidal height differences with a high‐precision geoid, leading to an independent determination of the orthometric heights of tide gauges along the east coast of Great Britain. A major GPS campaign was observed in May 1988. Measurements were made at time gauges between Leith and Lowestoft while simultaneously making measurements at fiducial sites. The results of the 1988 and subsequent campaigns are presented and discussed, and details are given of further observation campaigns to monitor the vertical movement of tide gauges around the coast of Britain by GPS. 相似文献
15.
Arctic absolute sea level variations were analyzed based on multi-mission satellite altimetry data and tide gauge observations for the period of 1993–2018. The range of linear absolute sea level trends were found ?2.00 mm/a to 6.88 mm/a excluding the central Arctic, positive trend rates were predominantly located in shallow water and coastal areas, and negative rates were located in high-latitude areas and Baffin Bay. Satellite-derived results show that the average secular absolute sea level trend was (2.53±0.42) mm/a in the Arctic region. Large differences were presented between satellite-derived and tide gauge results, which are mainly due to low satellite data coverage, uncertainties in tidal height processing and vertical land movement (VLM). The VLM rates at 11 global navigation satellite system stations around the Arctic Ocean were analyzed, among which 6 stations were tide gauge co-located, the results indicate that the absolute sea level trends after VLM corrected were of the same magnitude as satellite altimetry results. Accurately calculating VLM is the primary uncertainty in interpreting tide gauge measurements such that differences between tide gauge and satellite altimetry data are attributable generally to VLM. 相似文献
16.
17.
The sea surface dynamic topography (the sea surface height relative to the geoid; hereafter abbreviated SSDT) can be divided into the temporal mean SSDT and the fluctuation SSDT around the mean. We use the optimal interpolation method to reduce the satellite radial orbit error and estimate the fluctuation SSDT southeast of Japan from Seasat altimetry data during the 17-day near-repeat mission. The fluctuation SSDT is further combined with the mean geopotential anomalies estimated from hydrographic data during the Seasat mission in order to give the approximated total SSDT, called here the composite SSDT (the approximated mean plus fluctuation SSDT's). The fluctuation SSDT is in accord with the low-frequency sea-level fluctuation recorded at tide gauge stations in the Japanese islands. The composite SSDT describes thoroughly variations of the location of the Kuroshio axis south of Japan determined on the basis of the GEK (Geomagnetic Electro-Kinematograph) surface velocities and the horizontal temperature distribution. The composite SSDT also agrees with oceanic variations east of Japan found in the temperature distribution at the depth of 200 m. These results confirm that the SSDT derived from altimetry data can provide fairly precise synoptic views of low-frequency oceanic phenomena. 相似文献
18.
The response of an eddy-permitting ocean model to changes imposed by the use of different mean dynamic topographies (MDT) is analyzed in a multivariate assimilation context, allowing the evaluation of this impact, not only on the surface circulation, but also on the interior ocean representation. The assimilation scheme is a reduced-order sequential Kalman filter (SEEK). In a first set of experiments, high resolution sea surface temperature, along-track sea surface height and sea surface salinity from climatology are assimilated into a 1/3° resolution North and Tropical Atlantic version of the HYCOM model. In a second experiment, in situ profile data are assimilated in addition to the surface measurements.
The first set of experiments illustrates that important differences in the representation of the horizontal model circulation pattern are related to differences in the MDT used. The objective of assimilation is to improve the representation of the 3D ocean state. However, the imperfect representation of the mean dynamic topography appears to be an important limiting factor with regard to the degree of realism obtained in the simulated flow.
Vertical temperature and salinity profiles are key observations to drive a general circulation ocean model toward a more realistic state. The second set of experiments shows that assimilating them in addition to sea surface measurements is a far from trivial exercise. A specific difficulty is due to inconsistencies between the dynamic topography diagnosed from in situ observations and that diagnosed from sea surface height. These two fields obtained from different data sources do not contain exactly the same information. In order to overcome this difficulty, a strategy is proposed and validated. 相似文献
The first set of experiments illustrates that important differences in the representation of the horizontal model circulation pattern are related to differences in the MDT used. The objective of assimilation is to improve the representation of the 3D ocean state. However, the imperfect representation of the mean dynamic topography appears to be an important limiting factor with regard to the degree of realism obtained in the simulated flow.
Vertical temperature and salinity profiles are key observations to drive a general circulation ocean model toward a more realistic state. The second set of experiments shows that assimilating them in addition to sea surface measurements is a far from trivial exercise. A specific difficulty is due to inconsistencies between the dynamic topography diagnosed from in situ observations and that diagnosed from sea surface height. These two fields obtained from different data sources do not contain exactly the same information. In order to overcome this difficulty, a strategy is proposed and validated. 相似文献
19.
Validation of a decadal OGCM simulation for the tropical Pacific 总被引：2，自引：0，他引：2
An ocean general circulation model is forced with NCEP reanalysis over the 1948–1999 period. The simulated dynamic height and sea level are compared respectively to the dynamic height computed from hydrological data and to the sea level measured by tide gauges in the tropical Pacific. The model is shown to capture important features of the temporal structure of variability in the tide gauge data over the last several decades. However, the comparison reveals a largely artificial trend in the simulation, which consists of a decreasing dynamic height and sea level in the southwest and northwest of the tropical Pacific. Model sensitivity experiments show this trend is controlled by the NCEP surface wind stresses and more precisely by a weakening in the trade winds and a trend in the off-equatorial wind curl, with this trend existing mainly before the mid 1970s. For studies of decadal variability, the simple removal of a linear trend is an inadequate way to solve the problem, due to the inhomogeneities in the data used in reanalysis products and the non-linearity of models. 相似文献
20.
Surface manifestation of internal tides in the deep ocean: observations from altimetry and island gauges 总被引：3，自引：0，他引：3
The sea-surface height signatures of internal tides in the deep ocean, amounting to a few centimeters or less, are studied using two complementary measurement types: satellite altimetry and island tide gauges. Altimetry can detect internal tides that maintain coherence with the astronomical forcing; island gauges can monitor temporal variability which, in some circumstances, is due to internal tides varying in response to changes in the oceanic medium. This latter mechanism is at work at Hilo and other stations on the northern coasts of the Hawaiian Islands. By detecting spatially coherent low-frequency internal-tide modulations, the tide gauges, along with inverted echo sounders at sea, suggest that the mean internal tide is also spatially coherent; satellite altimetry confirms this. At Hawaii and in many other places, Topex/Poseidon altimetry detects mean surface waves, spatially coherent and propagating great distances (> 1000 km) before decaying below background noise. When temporal variability is small, the altimetry (plus information on ocean density) sets useful constraints on energy fluxes into internal tides. At the Hawaiian Ridge, 15 GW of tidal power is being converted from barotropic to first-mode baroclinic motion. Examples elsewhere warn that a simplistic interpretation of the altimetry, without regard to variability, noise, or in situ information, may be highly misleading. With such uncertainties, extension of the Hawaiian results into a usefully realistic estimate of the global internal-tide energy balance appears premature at this time. 相似文献