首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
A fully coupled thermal–hydraulic–mechanical–chemical (THMC) model was proposed to describe the migration of volatile organic contaminations (VOCs) in unsaturated landfill liners. The vertical soil stress, capillary pressure, air pressure, temperature increase, and solute concentration were selected as the primary variables. Finite deformations were described using Lagrangian coordinates. Non-isothermal moisture transport was found to be dependent on both the temperature gradient and the concentration of the VOCs. The VOCs were assumed to exist and be transported in three phases in the soil: solid, liquid, and gas. An illustrative example of an unsaturated landfill with a compacted clay liner was presented. For the case considered, the transport of gas phase VOCs was found to dominate the migration progress. Moreover, the temperature gradient can accelerate the breakthrough of VOCs in an unsaturated liner, while the mechanical consolidation slowed down the motion of the VOCs.  相似文献   

2.
A methodology is used to identify the tradeoffs between costs and exposure risk associated with landfill leachate collection and low permeable systems. The results are useful in demonstrating the point at which additional levels of sophistication in design of a leachate/liner system do not produce significant reductions of exposure risk. The case study application to the Durham Regional landfill demonstrates that clay liner hydraulic conductivity is the parameter with the largest influence on the risk of exceedance at the point of compliance. When the underlying clay is more permeable, there is a significant merit associated with use of a QA/QC program.  相似文献   

3.
Measurement of the saturated hydraulic conductivity of material in the unsaturated zone beneath proposed surface impoundments is important for predicting seepage rates of water and contaminants. Hazardous waste disposal facilities are commonly sited on the basis of the low permeability of the geologic materials beneath the site. Field measurement of the saturated hydraulic conductivity of low-permeability materials may be accomplished using air-entry permeameters and borehole permeameters. The results of a coordinated field and laboratory investigation of low-permeability materials at a hazardous waste facility are presented. The different methods of testing and analysis are compared and discussed. In general, air-entry permeameters and borehole permeameters are useful for measuring the saturated hydraulic conductivity of low-permeability materials.  相似文献   

4.
The HELP model (Version 2.05) was applied to simulate the long-term percolation from a proposed landfill in southern New Mexico. The model predicted percolation would be about 0.0012 in/yr (10-10 cm/s). This result compared very favorably with independent estimates of recharge at the site which used the chloride mass balance method and hydrogeologic properties. The recharge estimates at this site are also quite similar to values obtained at other sites in New Mexico and west Texas. The long-term percolation through a closed landfill at this site is very small and would be nearly 1000-fold smaller than the saturated hydraulic conductivity of a typical clay liner.  相似文献   

5.
Landfill is the most commonly used method for disposal of waste materials since it is one of the least expensive methods. In order to dispose of any hazardous material to a landfill, a liner is used, which protects the underlying land and groundwater since it acts as a barrier to fluid movement. Of the various methods available for providing improved and more effective properties of landfills, methods involving the use of bentonite, cement, lime, gypsum, etc., have been explored in the laboratory. The aim is to overcome the problem and deficiencies of the existing liners. It is observed from the experimental results that the metal concentrations of the input waste solution can be reduced to 80–98% using a soil‐cement admixture, 60–95% using a soil‐gypsum mixture, 45–95% using a soil‐bentonite mixture, 50–90% for soil, 35–80% using a soil‐lime mixture, as liner materials. The permeation rate of different metals through the different soil‐admixture media depends on various factors. A simple mathematical treatment of the phenomenon related to the permeation of liquid through the admixture of the clay and other components has been developed. The experimental results show satisfactory agreement with the predictions.  相似文献   

6.
Macro-pores such as crab burrows are found commonly distributed in salt marsh sediments. Their disturbance on the soil structure is likely to influence both pore water flows and solute transport in salt marshes; however, the effects of crab burrows are not well understood. Here, a three-dimensional model simulated tidally driven pore water flows subject to the influence of crab burrows in a marsh system. The model, based on Richards’ equation, considered variably saturated flow in the marsh with a two-layer soil configuration, as observed at the Chongming Dongtan wetland (Shanghai, China). The simulation results showed that crab burrows distributed in the upper low-permeability soil layer, acting as preferential flow paths, affected pore water flows in the marsh particularly when the contrast of hydraulic conductivity between the lower high-permeability soil layer and the overlying low-permeability soils was high. The burrows were found to increase the volume of tidally driven water exchange between the marsh soil and the tidal creek. The simulations also showed improvement of soil aeration conditions in the presence of crab burrows. These effects may lead to increased productivity of the marsh ecosystem and enhancement of its material exchange with coastal waters.  相似文献   

7.
Remote sensing and geoelectrical methods were used to find water-bearing fractures in the Scituate granite under the Central Landfill of Rhode Island. These studies were necessary to evaluate the integrity of the sanitary landfill and for planning safe landfill extensions. The most useful results were obtained with fracture trace analysis using Landsat and SLAR imagery in combination with ground-based resistivity measurements using Schlumberger vertical electrical soundings based on the assumption of horizontally layered strata. Test borings and packer tests confirmed, in the presence of a lineament and low bedrock resistivity, the probable existence of high bedrock fracture density and high average hydraulic conductivity. However, not every lineament was found to be associated with high fracture density and high hydraulic conductivity. Lineaments alone are not a reliable basis for characterising a landfill site as being affected by fractured bedrock. Horizontal fractures were found in borings located away from lineaments. High values of hydraulic conductivity were correlated with low bedrock resistivities. Bedrock resistivities between 60 and 700 Ω m were associated with average hydraulic conductivities between 4 and 60 cm/day. In some cases very low resistivities were confined to the upper part of the bedrock where the hydraulic conductivity was very large. These types of fractures apparently become narrower in aperture with depth. Bedrock zones having resistivities greater than 1000 Ω m showed, without exception, no flow to the test wells. Plots of bedrock resistivity versus the average hydraulic conductivity indicate that the resistivity decreases with increasing hydraulic conductivity. This relationship is inverse to that found in most unconsolidated sediments and is useful for estimating the hydraulic conductivity in groundwater surveys in fractured bedrock. In appropriate settings such as the Central Landfill site in New England, this electric-hydraulic correlation relationship, supplemented by lineament trace analysis, can be used effectively to estimate the hydraulic conductivity in bedrock from only a limited number of resistivity depth soundings and test wells.  相似文献   

8.
Electrical Leak Detection System for Landfill Liners: A Case History   总被引：9，自引：0，他引：9  
As landfill specifications become more stringent in the United Kingdom, the development of increasingly sophisticated monitoring methods is necessary to meet environmental protection goals. This case history describes the development of a 2-million-cubic-meter-capacity landfill located in a sandstone quarry and 1 km from a public water supply borehole, where the sensitivity of the site to ground water contamination and the proximity to a public water supply borehole are particular issues.
The landfill design incorporated a more sensitive environmental monitoring system, using a geophysical technique. The monitoring system comprises a permanent grid of electrodes installed beneath the landfill, connected by multicore cable to a computer-controlled earth resistance meter and switching unit in the site weighbridge. It was designed to detect holes in the landfill liner prior to and after covering with waste and to monitor the migration of contaminants beneath the landfill before they reach the perimeter observation boreholes, should leakage occur.
Such monitoring can enable the integrity of the landfill to be routinely reviewed; holes can be repaired if they are readily accessible and, if not, monitoring provides an early warning to enable the implementation of any additional monitoring or corrective action, based on the environmental risk posed by the site.
The system was first used as a quality assurance test once the landfill liner, which covered an area of 3 hectares, was installed. The system proved sensitive, detecting a hole consisting of two narrow knife cuts. Such sensitivity allows a high degree of confidence to be placed upon the integrity of the liner resulting in a significant contribution to public reassurance. The landfill is now operational, and monitoring using the geophysical system will be undertaken on a monthly basis for the first year, with the frequency of monitoring reviewed thereafter.  相似文献   

9.
This paper presents a new modelling approach to quantify the hydraulic diffusivity of low-permeability unconsolidated porous media under confined saturated-flow conditions in the laboratory. The derived analytical solution for the transient variation of the hydraulic head after flow interruption was applied to experimental data obtained from continuous measurements of the water pressure at two locations in the soil column. Three soil samples made of a mixture of natural bentonite (at different mass fractions) and medium sand were studied during a series of stepwise constant flow rates of water. The numerical results well fit the experimentally measured decrease of the dimensionless hydraulic head. The study shows that the increase of the mass fraction of bentonite in the soil sample from 10 to 30% is accompanied by a strong decrease of the hydraulic diffusivity from 2.4 × 10−2 to 1.1 × 10−3 m2 s−1, which is clearly due to the decrease of the hydraulic conductivity of the soil sample. The specific storages obtained for each of the three samples are in the same order of magnitude and seem to decrease with the increase of mass fraction of bentonite. However, they clearly reflect the predominant portion of the compressibility of the porous medium compared with that of water. Compared with reported literature values for clayey soils, the specific storage values in this study are slightly higher, varying within the range of 2 × 10−3 to 8.1 × 10−3 m−1.. The experimental results also give insight into the limitations of the modelling approach. In the case of low-permeability soils (K < 2 × 10−6 ms−1) and steady-flow conditions with low Reynolds numbers, for example, Re < 0.003, it is recommended to choose a time duration for flow interruption between subsequent flow rate steps of longer than 5 s. For high-permeability porous media, to increase the precision of the quantified hydraulic diffusivity, it might be useful to select a measuring frequency significantly higher than 1 Hz.  相似文献   

10.
Recently, considerable efforts have been devoted to evaluation of seismic dynamic response of a circular tunnel. Conventional approaches have considered integral liners embedded in an elastic medium. In this study, we re-examine the problem with piecewise liners embedded in a porous medium. Surrounding saturated porous medium of tunnels is described by Biot's poroelastic theory, while the liner pieces and the connecting joints are treated as curved beams and characterized by curved beam theories. The scattered wave field in the porous medium is obtained by the wave function expansion method. The differential equations governing the vibration of a curved beam is discretized by the General Differential Quadrature (GDQ) method. The domain decomposition method is used to establish the global discrete dynamic equations for the piecewise tunnel. The surrounding soil and the tunnel are coupled together via the stress and the displacement continuation conditions which are implemented by the boundary collocation method. Numerical results demonstrate that the stiffness difference between the liner piece and the connecting joints has a considerable influence on the internal forces of the liner piece.  相似文献   

11.
In this article, we are concerned with the statistics of steady unsaturated flow in soils with a fractal hydraulic conductivity distribution. It is assumed that the spatial distribution of log hydraulic conductivity can be described as an isotropic stochastic fractal process. The impact of the fractal dimension of this process, the soil pore-size distribution parameter, and the characteristic length scale on the variances of tension head and the effective conductivity is investigated. Results are obtained for one-dimensional and three-dimensional flows. Our results indicate that the tension head variance is scale-dependent for fractal distribution of hydraulic conductivity. Both tension head variance and effective hydraulic conductivity depend strongly on the fractal dimension. The soil pore-size distribution parameter is important in reducing the variability of the unsaturated hydraulic conductivity and of the fluxes.  相似文献   

12.
《Advances in water resources》2007,30(4):1016-1026
We have proved that the Hantush’s model [Hantush MS. Wells near streams with semipervious beds. J Geophys Res 1965;70:2829–38] in a half-domain can be extended to a whole-domain and becomes identical to that of Hunt [Hunt B. Unsteady stream depletion from ground water pumping. Ground Water 1999;37(1):98–102] for a shallow and infinitely narrow stream, provided that the Dupuit assumption is adopted. This proof helps correct a false concept that regards the Hantush’s model as less useful because of its fully penetrating stream assumption. This study deals with interaction of an aquifer with two parallel streams based on the Hantush’s model. Semi-analytical solutions are obtained based on rigorous mass conservation requirement by maintaining continuity of flux and head along the aquifer–streambed boundaries. This study shows that the hydraulic conductivity ratio of the two streambeds appears to be the most important factor controlling the stream–aquifer interaction, followed by a less important role played by the thickness ratio of the two streambeds. When the low-permeability streambeds do not exist, the steady-state stream depletion from one stream is linearly proportional to the ratio of the shortest distance from the pumping well to the other stream over the shortest distance between the two streams. When the low-permeability streambeds are presented, similar conclusion can be drawn except that the stream depletion now also strongly depends on the hydraulic conductivity ratio of the two streambeds. When the values of the hydraulic conductivity of the two streambeds are different by an order of magnitude, the location of the pumping well that receives equal flux from two streams can be off the middle-line between the two streams by nearly 90%.  相似文献   

13.
Water infiltration rate and hydraulic conductivity in vegetated soil are two vital hydrological parameters for agriculturists to determine availability of soil moisture for assessing crop growths and yields, and also for engineers to carry out stability calculations of vegetated slopes. However, any effects of roots on these two parameters are not well‐understood. This study aims to quantify the effects of a grass species, Cynodon dactylon, and a tree species, Schefflera heptaphylla, on infiltration rate and hydraulic conductivity in relation to their root characteristics and suction responses. The two selected species are commonly used for ecological restoration and rehabilitation in many parts of the world and South China, respectively. A series of in‐situ double‐ring infiltration tests was conducted during a wet summer, while the responses of soil suction were monitored by tensiometers. When compared to bare soil, the vegetated soil has lower infiltration rate and hydraulic conductivity. This results in at least 50% higher suction retained in the vegetated soil. It is revealed that the effects of root‐water uptake by the selected species on suction were insignificant because of the small evapotranspiration (<0.2 mm) when the tests were conducted under the wet climate. There appears to have no significant difference (less than 10%) of infiltration rates, hydraulic conductivity and suction retained between the grass‐covered and the tree‐covered soil. However, the grass and tree species having deeper root depth and greater Root Area Index (RAI) retained higher suction. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

14.
J. Holden  T. P. Burt 《水文研究》2003,17(6):1227-1237
A key parameter used in wetland hydrological and landform development models is hydraulic conductivity. Head recovery tests are often used to measure hydraulic conductivity, but the calculation techniques are usually confined to rigid soil theory. This is despite reports demonstrating the misapplication of rigid soil theory to non‐rigid soils such as peats. Although values of hydraulic conductivity calculated using compressible techniques have been presented for fenland peats, these data have never, to the authors' knowledge, been compared with such calculations in other peat types. Head recovery tests (slug withdrawal) were performed on piezometers at depths ranging from 10 to 80 cm from the surface on north Pennines blanket peats. Results were obtained using both rigid and compressible soil theories, thus allowing comparison of the two techniques. Compressible soil theory gives values for hydraulic conductivity that are typically a factor of five times less than rigid soil calculations. Hydraulic conductivity is often assumed to decrease with depth in upland peats, but at the study site in the northern Pennines it was not found to vary significantly with depth within the range of peat depths sampled. The variance within depth categories was not significantly different to the variance between depth categories showing that individual peat layers did not have characteristic hydraulic conductivity values. Thus, large lateral and vertical differences in hydraulic conductivity over short distances create problems for modelling but may help account for the high frequency of preferential flow pathways within what is otherwise a low matrix hydraulic conductivity peat. Hydraulic conductivity was found to vary significantly between sampling sites, demonstrating that hillslope‐ or catchment‐scale variability may be more important than plot‐scale variability. Values for compressibility of the peats are also reported. These generally decline with depth, and they also vary significantly between sampling sites. There are implications for the way in which measurements of hydraulic conductivity and other properties of blanket peat are interpreted, as the effects of environmental change in one part of a peat catchment may be very different to those in another. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

15.
Infiltration is the primary mechanism in green stormwater infrastructure (GSI) systems to reduce the runoff volume from urbanized areas. Soil hydraulic conductivity is most important in influencing GSI infiltration rates. Saturated hydraulic conductivity (Ksat) is a critical parameter for GSI design and post-construction performance. However, Ksat measurement in the field is problematic due to temporal and spatial variability and measurement errors. This review paper focuses on a comparison of methods for in-situ Ksat measurement and the causes of temporal and spatial variations of Ksat within GSI systems. Automated infiltration testing methods, such as the Modified Philip–Dunne (MPD) and SATURO infiltrometers, show promise for efficient Ksat measurements. Soil Ksat values can change over time and substantially vary throughout a GSI, which can be attributed to multiple factors, including but not limited to temperature changes, soil composition and properties, soil compaction level, plant root morphology and distribution, biological and macrofauna activities in the soil, inflow sediment characteristics, quality of infiltrating water, and measurement errors. There is evidence that infiltration rates in vegetated urban GSI systems are sustained given an appropriate GSI design, reasonable concentration of suspended sediments in the inflow runoff, and routine maintenance procedures. These observations indicate that clogging can be counteracted by processes that tend to increase the soil hydraulic conductivity (e.g., plant root and biological activities). This self-sustainability underlines that infiltration-based GSI systems are a reliable long-term stormwater management solution. Recommendations on how to incorporate the temporal changes of Ksat in GSI design and on obtaining a spatially-representative Ksat for the GSI design are presented.  相似文献   

16.
Estimates of soil hydraulic properties using pedotransfer functions (PTF) are useful in many studies such as hydrochemical modelling and soil mapping. The objective of this study was to calibrate and test parametric PTFs that predict soil water retention and unsaturated hydraulic conductivity parameters. The PTFs are based on neural networks and the Bootstrap method using different sets of predictors and predict the van Genuchten/Mualem parameters. A Danish soil data set (152 horizons) dominated by sandy and sandy loamy soils was used in the development of PTFs to predict the Mualem hydraulic conductivity parameters. A larger data set (1618 horizons) with a broader textural range was used in the development of PTFs to predict the van Genuchten parameters. The PTFs using either three or seven textural classes combined with soil organic mater and bulk density gave the most reliable predictions of the hydraulic properties of the studied soils. We found that introducing measured water content as a predictor generally gave lower errors for water retention predictions and higher errors for conductivity predictions. The best of the developed PTFs for predicting hydraulic conductivity was tested against PTFs from the literature using a subdata set of the data used in the calibration. The test showed that the developed PTFs gave better predictions (lower errors) than the PTFs from the literature. This is not surprising since the developed PTFs are based mainly on hydraulic conductivity data near saturation and sandier soils than the PTFs from the literature. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

17.
The mining industry has grown strongly in China in recent decades, resulting in large amounts of coal gangues, which cause water and soil pollution, soil erosion, and various other environmental problems. They are often used in reclamation projects in attempts to restore land damaged by mining, hence they are frequently present (in widely varying proportions) in the topsoil in areas around mines. Their presence can strongly affect key soil variables, including its bulk density, structure, water retention, water movement, and solute transport rates. In the study presented here, the effects of gangue contents on infiltration, saturated hydraulic conductivity, and solute transport parameters of a Chinese Loess plateau soil were examined. The results show that infiltration rates and saturated hydraulic conductivity decreased with increasing gangue content. The Peck–Watson equation modeled these relationships well, but Bouwer–Rice equations provided poorer matches with the acquired data. Cumulative infiltration over time was described well by both the Philip equation and Kostiakov equation. Both the simplified convection–dispersion equation and a two‐region model described the solute transport processes well. In addition, the dispersion increased, while both the Peclet number and mobile water fraction decreased, with increases in gangue contents.  相似文献   

18.
  相似文献   

19.
Modeling unsaturated flow in porous media requires constitutive relations that describe the soil water retention and soil hydraulic conductivity as a function of either potential or water content. Often, the hydraulic parameters that describe these relations are directly measured on small soil cores, and many cores are needed to upscale to the entire heterogeneous flow field. An alternative to the forward upscaling method using small samples are inverse upscaling methods that incorporate soft data from geophysical measurements observed directly on the larger flow field. In this paper, we demonstrate that the hydraulic parameters can be obtained from cross borehole ground penetrating radar by measuring the first arrival travel time of electromagnetic waves (represented by raypaths) from stationary antennae during a constant flux infiltration experiment. The formulation and coupling of the hydrological and geophysical models rely on a constant velocity wetting front that causes critical refraction at the edge of the front as it passes by the antennae. During this critical refraction period, the slope of the first arrival data can be used to calculate (1) the wetting velocity and (2) the hydraulic conductivity of the wet (or saturated) soil. If the soil is undersaturated during infiltration, then an estimate of the saturated water content is needed before calculating the saturated hydraulic conductivity. The hydraulic conductivity value is then used in a nonlinear global optimization scheme to estimate the remaining two parameters of a Broadbridge and White soil.  相似文献   

20.
Contaminant transport in a strongly heterogeneous stratified formation whose log hydraulic conductivity distribution has a variance greater than unity is investigated. Four kinds of waste leakage scenario are studied. They are: (1) continuous waste leakage from landfills; (2) temporal waste leakage from landfills; (3) continuous deep-well injection wastes; and (4) temporal deep-well injection wastes. Ensemble average concentrations and variances of concentration distributions are calculated for the four scenarios. The results in this paper show that when heterogeneity of a formation increases, transport in this formation differs significantly from the linear solutions which assume that the variances of log hydraulic conductivity are less than unity.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号