共查询到20条相似文献，搜索用时 93 毫秒
1.
Three-dimensional hydroelasticity theory is used to predict the hydroelastic response of flexible floating interconnected structures. The theory is extended to take into account hinge rigid modes, which are calculated from a numerical analysis of the structure based on the finite element method. The modules and connectors are all considered to be flexible, with variable translational and rotational connector stiffness. As a special case, the response of a two-module interconnected structure with very high connector stiffness is found to compare well to experimental results for an otherwise equivalent continuous structure. This model is used to study the general characteristics of hydroelastic response in flexible floating interconnected structures, including their displacement and bending moments under various conditions. The effects of connector and module stiffness on the hydroelastic response are also studied, to provide information regarding the optimal design of such structures. 相似文献
2.
在工程设计中,通常采用模块化方式制造超大型浮式结构物,将巨大的单体结构分割成多个较小模块,后期通过合适的连接器拼装形成。为了明确多模块超大浮体在波浪作用下的水弹性响应,以两个相邻层合浮体（高刚度面板和低密度芯材）为研究对象,建立波浪作用下铰接层合浮体水弹性响应的高阶势流模型。采用匹配特征函数展开法求解流体运动的速度势,探讨了铰接处弹簧刚度对浮体的反射系数、透射系数、挠度、弯矩和剪力的影响规律。研究结果表明：迎浪侧浮体的存在可以有效降低背浪侧浮体的挠度、弯矩和剪力幅值;与垂直弹簧相比,扭转弹簧刚度的增加可以更加有效抑制铰接层合浮体的水弹性响应;当扭转弹簧刚度大于一定值时,继续增大弹簧刚度对浮体的动力响应不产生影响。 相似文献
3.
The eigenfrequency of offshore wind turbine structures is a crucial design parameter, since it determines the dynamic behavior of the structure and with that the fatigue loads for the structural design. For offshore wind turbines founded on monopiles, the rotational stiffness of the monopile-soil system for un- and reloading states strongly affects the eigenfrequency. A numerical model for the calculation of the monopile’s behavior under un- and reloading is established and validated by back-calculation of model and field tests. With this model, a parametric study is conducted in which pile geometry, soil parameters and load conditions are varied. It is shown that of course the rotational stiffness varies with mean load and magnitude of the considered un- and reloading span, but that for most relevant load situations the initial rotational stiffness of the monopile system, i.e. the initial slope of the moment-rotation curve for monotonic loading, gives a good estimate of the actual stiffness. Comparisons of different p–y approaches show that the ordinary API approach considerably underestimates the initial stiffness, whereas the recently developed ‘Thieken’ approach and also the ‘Kallehave’ approach give a much better prediction and thus might be used in the design of monopiles in sand. 相似文献
4.
《Applied Ocean Research》2005,27(4-5):187-208
In the present paper, the performance of a moored floating breakwater under the action of normal incident waves is investigated in the frequency domain. A three-dimensional hydrodynamic model of the floating body is coupled with a static and dynamic model of the mooring lines, using an iterative procedure. The stiffness coefficients of the mooring lines in six degrees of freedom of the floating breakwater are derived based on the differential changes of mooring lines' tensions caused by the static motions of the floating body. The model of the moored floating system is compared with experimental and numerical results of other investigators. An extensive parametric study is performed to investigate the effect of different configurations (length of mooring lines and draft) on the performance of the moored floating breakwater. The draft of the floating breakwater is changed through the appropriate modification of mooring lines' length. Numerical results demonstrate the effects of the wave characteristics and mooring lines' conditions (slack-taut). The existence of ‘optimum’ configuration of the moored floating breakwater in terms of wave elevation coefficients and mooring lines' forces is clearly demonstrated, through a decision framework. 相似文献
5.
In this study, we develop a numerical method for a 3D linear hydroelastic analysis of floating structures with liquid tanks subjected to surface regular water waves and compare the numerical results with experimental tests. Considering direct couplings among structural motion, sloshing, and water waves, a mathematical formulation and a numerical method extended from a recent work [1] are developed. The finite element method is employed for the floating structure and internal fluid in tanks, and the boundary element method is used for the external fluid. The resulting formulation completely incorporates all the interaction terms including hydrostatic stiffness and the irregular frequency effect is removed by introducing the extended boundary integral equations. Through various numerical tests, we verify the proposed numerical method. We also performed 3D hydroelastic experimental tests of a floating production unit (FPU) model in an ocean basin. The measured dynamic motions are compared with the numerical results obtained using the proposed method. 相似文献
6.
Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses 总被引：1，自引：0，他引：1
Byoung Wan Kim Sa Young Hong Jo Hyun Kyoung Seok Kyu Cho 《Ocean Engineering》2007,34(11-12):1668-1679
This paper investigates the characteristics of bending moments, shear forces and stresses at unit connections of very large floating structures (VLFS) under wave loads. The responses of VLFS are calculated by solving multi-body motion equation considering hydroelasticity and connection stiffness. Hydroelastic responses are calculated by the direct method. Higher-order boundary element method (HOBEM) is used for fluid analysis and finite element method (FEM) is introduced for structural analysis. The equation of motion is modified to describe the unit connections by employing spring elements. Bending moments and shear forces at the connections are obtained from the dynamic equilibrium condition for pressures and inertia forces. Two types of VLFS units such as tandem arranged units and side-by-side arranged units are considered in the numerical examples. The influences of connection stiffness, wave frequency and heading angle on responses of VLFS are investigated through the numerical examples. Rigid body analysis along with hydroelastic analysis is also carried out in the numerical analysis and comparison of those two approaches is discussed. 相似文献
7.
The importance of hydroelastic analysis of large and flexible container ships of today is pointed out. A methodology for investigation of this challenging phenomenon is drawn up and a mathematical model is worked out. It includes definition of ship geometry, mass distribution, structure stiffness, and combines ship hydrostatics, hydrodynamics, wave load, ship motion and vibrations. Based on the presented theory, a computer program is developed and applied for hydroelastic analysis of a flexible segmented barge for which model test results of motion and distortion in waves have been available. A correlation analysis of numerical simulation and measured response shows quite good agreement of the transfer functions for heave, pitch, roll, vertical and horizontal bending and torsion. The tool checked in such a way can be further used for reliable hydroelastic analysis of ship-like structures. 相似文献
8.
A three-dimensional general mathematical hydroelastic model dealing with the problem of wave interaction with a floating and a submerged flexible structure is developed based on small amplitude wave theory and linear structural response. The horizontal floating and submerged flexible structures are modelled with a thin plate theory. The linearized long wave equations based on shallow water approximations are derived and results are compared. Three-dimensional Green’s functions are derived using fundamental source potentials in water of finite and infinite depths. The expansion formulae associated with orthogonal mode-coupling relations are derived based on the application of Fourier transform in finite and infinite depths in case of finite width in three-dimensions. The usefulness of the expansion formula is demonstrated by analysing a physical problem of surface gravity wave interaction with a moored finite floating elastic plate in the presence of a finite submerged flexible membrane in three-dimensions. The numerical accuracy of the method is demonstrated by computing the complex values of reflected wave amplitudes for different modes of oscillation and mooring stiffness. Further, the effect of compressive force and modes of oscillations on a free oscillation hydroelastic waves in a closed channel of finite width and length for floating and submerged elastic plate system is analysed. 相似文献
9.
The purpose of this paper is to optimise the hydroelastic performance of a composite marine propeller to reduce vibration and dynamic stress. A hydroelasticity method based on the finite element method (FEM) coupled with computational fluid dynamics (CFD) is used to simulate the composite marine propeller in a non-uniform wake. Composite blades can be considered as a cantilever-like laminated structure experiencing an unsteady hydrodynamic load and centrifugal force. The objective of the improved design is to minimise the vibratory hub loads. The ply angle and stacking sequence are considered as the design variables. The nonlinear periodic transient responses and vibration hub loads of the composite blade are obtained by solving coupled equations using the Newton–Raphson numerical procedure. Compared to the starting design of the propeller, the optimum solution results in a 49.6–70.6% reduction of the 7/rev hub loads. 相似文献
10.
Lin-jian Wu Yuan-zhan Wang Yu-chi Wang Jia-yu Chen Yi Li Qing-mei Li Tao Xie 《中国海洋工程》2018,32(6):683-695
This paper investigates a simplified method to determine the optimal stiffness of flexible connectors on a mobile offshore base (MOB) during the preliminary design stage. A three-module numerical model of an MOB was used as a case study. Numerous constraint forces and relative displacements for the connectors at rough sea states with different wave angles were utilized to determine the optimized stiffness of the flexible connectors. The range of optimal stiffnesses for the connectors was obtained based on the combination and intersection of the optimized stiffness results, and the implementation steps were elaborated in detail. The percentage reductions of the optimized and optimal stiffness of the flexible connector were determined to quantitatively evaluate the decreases of the constraint force and relative displacement of the connectors compared with those calculated by using the original range of the connector stiffnesses. The results indicate the accuracy and feasibility of this method for determining the optimal stiffness of the flexible connectors and demonstrate the rationality and practicability of the optimal stiffness results. The research ideas, calculation process, and solutions for the optimal stiffness of the flexible connectors of an MOB in this paper can provide valuable technical support for the design of the connectors in similar semisubmersible floating structures. 相似文献
11.
No other environmental variable of such ecological importance to estuarine and coastal marine ecosystems around the world has changed so drastically, in such a short period of time, as dissolved oxygen in coastal waters. The prevalent methods for counteracting anoxic sea events are indirect measures which aim to cut-down anthropic loads introduced in river and marine environments. To date, no direct approaches, like artificial devices have been investigated except the WEBAP and OXYFLUX devices. The present paper adopts a numerical approach to the analysis of the pumped surface water as well as the analysis of the dynamic response of the OXYFLUX device. By means of a CFD-RANS code and through the application of overset grid method, the 1/16 OXYFLUX model’s dynamic response and pumping performance are evaluated. The appropriate grid is selected after an extensive sensitivity analysis carried out on 9 different grids. The CFD model is validated by comparing numerical and physical results of heave decay test, heave response, and surface water discharge under the action of regular waves. The extensive comparison with experimental results shows consistently accurate predictions. The main findings of the study show that nonlinear effects remarkable reduce the dynamic behaviour of the OXYFLUX and generate an unexpected second harmonic for pitch response intensifying the overtopping discharge also for small waves caused by the summer's low intensity winds. 相似文献
12.
A Mobile Offshore Base (MOB) is a multi-purpose logistics base, which can be stationed in coastal or international waters. In the conceptual design of the MOB, attention should be paid to the dynamic responses of the inter-module connectors because tremendous loads occur in the connectors. In this paper, a study on dynamic responses of the MOB connectors is carried out by use of the Rigid Module Flexible Connector (RMFC) model which assumes that the module stiffness is significantly larger than that of the connector. In the analysis, the connector is modeled as a linear spring, which restricts relative translations but allows for relative rotations of modules. The 3-D source distribution method is adopted to determine the hydrodynamic forces of the modules, and the hydrodynamic interaction between modules is taken into account. The module motions and connector loads for 12 connector stiffness cases in regular and irregular waves are calculated with the multi-rigid-body motion equations. And the calculat 相似文献
13.
多模块超大型浮体一般由连接器连接,实现海上浮动机场等功能。实际操作中,为约束超大型浮体模块之间的相对运动,连接器通常将承受非常巨大的载荷,给连接器的制造带来巨大的困难。通过对不同环境力情况下不同刚度连接器的研究,分析了连接器刚度对超大型浮体模块之间相对运动与连接器自身承受载荷的影响。研究发现,随着柔性连接器刚度的增加,连接器对超大浮体模块之间相对运动的约束逐渐增强,同时连接器也将承受更大的载荷;此外,较大的连接器刚度,并不利于抵抗模块之间的冲击载荷;最后,连接器刚度的改变会影响其固有振动频率,因此需要尽可能避开共振区域,否则系统容易出现较大的振动,导致模块间相对运动过大,连接器过载。研究结果确定了连接器刚度最佳匹配原则,以指导连接器的工程设计。 相似文献
14.
Comparison of Linear Level I Green-Naghdi Theory with Linear Wave Theory for Prediction of Hydroelastic Responses of VLFS 总被引：4，自引：0，他引：4
Very Large Floating Structures (VLFS) have drawn considerable attention recently due to their potential significance in the exploitation of ocean resources and in the utilization of ocean space. Efficient and accurate estimation of their hydroelastic responses to waves is very important for the design. Recently, an efficient numerical algorithm was developed by Ertekin and Kim (1999). However, in their analysis, the linear Level I Green-Naghdi (GN) theory is employed to describe fluid dynamics instead of the conventional linear wave (LW) theory of finite water depth. They claimed that this linear level I GN theory provided betler predictions of the hydroelastic responses of VLFS than the linear wave theory. In this paper, a detailed derivation is given in the conventional linear wave theory framework with the same quantity as used in the linear level I GN theory framework. This allows a critical comparison between the linear wave theory and the linear level I GN theory. it is found that the linear level 相似文献
15.
This paper is concerned with the hydroelastic responses of a mat-like, rectangular very large floating structure (VLFS) edged with a pair of horizontal/inclined perforated anti-motion plates in the context of the direct coupling method. The updated Lagrangian formulae are applied to establish the equilibrium equations of the VLFS and the total potential formula is employed for fluids in the numerical model including the viscous effect of the perforated plates through the Darcy''s law. The hybrid finite element-boundary element (FE-BE) method is implemented to determine the response reduction of VLFS with attached perforated plates under various oblique incident waves. Also, the numerical solutions are validated against a series of experimental tests. The effectiveness of the attached perforated plates in reducing the deflections of the VLFS can be significantly improved by selecting the proper design parameters such as the porous parameter, submergence depth, plate width and inclination angle for the given sea conditions. 相似文献
16.
Vinicius Aguiar de Souza Levent Kirkayak Katsuyuki Suzuki Hideyuki Ando Hidetoshi Sueoka 《Ocean Engineering》2012
This paper describes an approach to simulate a seven-tier stack consisting of scaled model of a 20 ft ISO freight container and its linking connectors, denominated twist locks, subjected to dynamical load induced by its base. The physical (dimensions, mass, and moments of inertia) and structural (longitudinal, transversal and torsional stiffness) characteristics of the scaled models were decided based on two dimensionless numbers: ratios between gravity force and inertia force, and elastic force divided by inertia force, through experimental and numerical analysis. A series of experiments with controlled parameters were performed using a shaking table test to understand the effects of each variable in the container stack dynamics and present enough data to validate the numerical model. The results of this study indicate that the numerical model built is a promising tool for further study. Moreover, the model is able to predict conditions close to real situations faced by container stacks while storage on a ship's deck. 相似文献
17.
Surface Piercing Propellers (SPPs) are a particular kind of propellers which are partially submerged operating at the interface of air and water. They are more efficient than submerged propellers for the propulsion system of high-speed crafts because of larger propeller diameter, replacing cavitation with ventilation, decreasing the torque and higher efficiency. This study presents a reliable numerical simulation to predict SPP performance using Unsteady Reynolds-Averaged Navier–Stokes (URANS) method. A numerical study on 841-B SPP is performed in open water condition. The free surface is modeled by Volume of Fluid (VOF) approach and the sliding mesh technique is implemented to model the propeller rotational motion. The sliding mesh allows capturing the process of water entry and water exit of blades. The propeller hydrodynamic characteristics, the ventilation pattern and the time history of blade loads are validated through the comparison with available experimental data. For the studied case, it was found that the common grid independence study approach is not sufficient. The grid should be elaborately generated fine enough based on the flow pattern and turbulence modeling parameters in regions near the blade's tip, trailing and leading edges and over the suction side. Details of URANS simulations including optimal time-step size based on propeller revolution rate and the required number of propeller revolutions for periodical results are presented and discussed. 相似文献
18.
The application of very large floating structure (VLFS) to the utilization of ocean space and exploitation of ocean resources has become one of the issues of great interest in international ocean engineering field. Owing to the advantage of simplicity in structure and low cost of construction and maintenance, box-type VLFS can be used in the calm water area near the coast as the structure configuration of floating airport. In this paper, a 3D linear hydroelastic theory is used to study the dynamic response of box-type VLFS in sinusoidal regular waves. A beam model and a 3D FEM model are respectively employed to describe the dynamic characteristics of the box-type structure in vacuum. A hydrodynamic model (3D potential theory of flexible body) is applied to investigate the effect of different dry models on the hydroelastic response of box-type structure. Based on the calculation of hydroelastic response in regular waves, the rigid body motion displacement, flexible deflection, and the short term and long 相似文献
19.
A new hybrid method for the time-domain nonlinear simulation of the hydroelastic load effects and the peak over threshold (POT) method for the calculation of the short-term extreme responses are briefly described and applied to a flexible SL-7 class containership and a flexible liquefied natural gas (LNG) ship. Three stiffness levels, three stiffness distributions and three modal damping ratios are used to study the influence of the hull flexibility and structural damping on the short-term prediction of extreme vertical hydroelastic load effects. The results give justification for some simplified treatment of the first vertical flexible mode in early design stage when structural details are not available. 相似文献
20.
Although the coupled horizontal–torsional vibrations of open ships have been investigated numerically for decades, the available experimental data in oblique seas seem rare. Model tests, considering natural frequencies of bending and torsional modes, have been conducted by the Centre for Ships and Ocean Structures (CeSOS) in the towing tank and ocean basin. A flexible backbone model was designed with five cut-outs on the top side of the aluminum beam to realize approximately torsional stiffness as well as vertical and horizontal bending stiffness. This paper mainly deals with measured bending and torsional vibrations in regular and irregular waves. The damping ratios, mode shapes, and modal moments were derived from experimental data, and a numerical model based on modal superimposition is established according to the measured hydroelastic properties. Some time-domain simulations are carried out considering the structural characteristics, and compared with measured results. The test data in regular waves are presented to show the possible factors of influence on the vibrations. The effect of bending and torsional vibrations on the extreme response values in irregular waves is estimated. The uncertainties in the experiments are discussed and conclusions are presented at the end of this paper. 相似文献