首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 774 毫秒
1.
《Sedimentology》2018,65(5):1558-1589
Most of the present knowledge of shallow‐marine, mixed carbonate–siliciclastic systems relies on examples from the carbonate‐dominated end of the carbonate–siliciclastic spectrum. This contribution provides a detailed reconstruction of a siliciclastic‐dominated mixed system (Pilmatué Member of the Agrio Formation, Neuquén Basin, Argentina) that explores the variability of depositional models and resulting stratigraphic units within these systems. The Pilmatué Member regressive system comprises a storm‐dominated, shoreface to basinal setting with three subparallel zones: a distal mixed zone, a middle siliciclastic zone and a proximal mixed zone. In the latter, a significant proportion of ooids and bioclasts were mixed with terrigenous sediment, supplied mostly via along‐shore currents. Storm‐generated flows were the primary processes exporting fine sand and mud to the middle zone, but were ineffective to remove coarser sediment. The distal zone received low volumes of siliciclastic mud, which mixed with planktonic‐derived carbonate material. Successive events of shoreline progradation and retrogradation of the Pilmatué system generated up to 17 parasequences, which are bounded by shell beds associated with transgressive surfaces. The facies distribution and resulting genetic units of this siliciclastic‐dominated mixed system are markedly different to the ones observed in present and ancient carbonate‐dominated mixed systems, but they show strong similarities with the products of storm‐dominated, pure siliciclastic shoreface–shelf systems. Basin‐scale depositional controls, such as arid climatic conditions and shallow epeiric seas might aid in the development of mixed systems across the full spectrum (i.e. from carbonate‐dominated to siliciclastic‐dominated end members), but the interplay of processes supplying sand to the system, as well as processes transporting sediment across the marine environment, are key controls in shaping the tridimensional facies distribution and the genetic units of siliciclastic‐dominated mixed systems. Thus, the identification of different combinations of basin‐scale factors and depositional processes is key for a better prediction of conventional and unconventional reservoirs within mixed, carbonate–siliciclastic successions worldwide.  相似文献   

2.
Due to difficulties in correlating aeolian deposits with coeval marine facies, sequence stratigraphic interpretations for arid coastal successions are debated and lack a unifying model. The Pennsylvanian record of northern Wyoming, USA, consisting of mixed siliciclastic–carbonate sequences deposited in arid, subtropical conditions, provides an ideal opportunity to study linkages between such environments. Detailed facies models and sequence stratigraphic frameworks were developed for the Ranchester Limestone Member (Amsden Formation) and Tensleep Formation by integrating data from 16 measured sections across the eastern side of the Bighorn Basin with new conodont biostratigraphic data. The basal Ranchester Limestone Member consists of dolomite interbedded with thin shale layers, interpreted to represent alternating deposition in shallow marine (fossiliferous dolomite) and supratidal (cherty dolomite) settings, interspersed with periods of exposure (pedogenically modified dolomites and shales). The upper Ranchester Limestone Member consists of purple shales, siltstones, dolomicrites and bimodally cross‐bedded sandstones in the northern part of the basin, interpreted as deposits of mixed siliciclastic–carbonate tidal flats. The Tensleep Formation is characterized by thick (3 to 15 m) aeolian sandstones interbedded with peritidal heteroliths and marine dolomites, indicating cycles of erg accumulation, preservation and flooding. Marine carbonates are unconformably overlain by peritidal deposits and/or aeolian sandstones interpreted as lowstand systems tract deposits. Marine transgression was often accompanied by the generation of sharp supersurfaces. Lags and peritidal heteroliths were deposited during early stages of transgression. Late transgressive systems tract fossiliferous carbonates overlie supersurfaces. Highstand systems tract deposits are lacking, either due to non‐deposition or post‐depositional erosion. The magnitude of inferred relative sea‐level fluctuations (>19 m), estimated by comparison with analogous modern settings, is similar to estimates from coeval palaeotropical records. This study demonstrates that sequence stratigraphic terminology can be extended to coastal ergs interacting with marine environments, and offers insights into the dynamics of subtropical environments.  相似文献   

3.
《Sedimentology》2018,65(4):1097-1131
Wide carbonate platform environments developed on the western passive margin of the Tethys during the Late Triassic, after a major climate change (Carnian Pluvial Episode) that produced a crisis of high‐relief microbial carbonate platforms. The peritidal succession of this epicontinental platform (Dolomia Principale/Hauptdolomit, Dachstein Limestone) is widespread in the Mediterranean region. However, the start‐up stage is not fully understood. The original platform to basin depositional geometries of the system have been studied in the north‐eastern Southern Alps, close to the Italian/Slovenian boundary where they are exceptionally preserved. Sedimentological features have been investigated in detail by measuring several stratigraphic sections cropping out along an ideal depositional profile. The analysis of the facies architecture allowed reconstruction of the palaeoenvironments of the Dolomia Principale platform during its start‐up and early growth stages in the late Carnian. The carbonate platform was characterized by an outer platform area, connected northward to steep slopes facing a relatively deep basin. Southward, the outer platform was connected to inner sheltered environments by a narrow, often emerged shelf crest. Behind this zone, carbonate sedimentation occurred in shallow lagoons and tidal flats, passing inward to a siliciclastic mudflat. The Dolomia Principale platform was initially aggrading and able to keep pace with a concomitant sea‐level rise, and then prograding during the late Carnian. This stratigraphic interval was correlated with the Tuvalian succession of the Dolomites, allowing depiction of the depositional system on a wide scale of hundreds of kilometres. This large‐scale depositional system presents features in common with some Palaeozoic and Mesozoic carbonate build‐ups (for example, the Permian Capitan Reef complex, Anisian Latemar platform), both in terms of architecture and prevailing carbonate producers. A microbial‐dominated carbonate factory is found in the outer platform and upper slope. The recovery of high‐relief microbial carbonate platforms marks the end of the Carnian Pluvial Episode in the Tuvalian of Tethys.  相似文献   

4.
  相似文献   

5.
The Upper Cretaceous succession of the Leonese Area (NW Spain) comprises mixed clastic and carbonate sediments. This succession is divided into two lithostratigraphic units, the Voznuevo Member and the Boñar Formation, which represent fluvial, shoreface, intertidal, subtidal and open‐shelf sedimentary environments. Regional seismic interpretation and sequence stratigraphic analysis have allowed the study of lateral and vertical changes in the sedimentary record and the definition of third‐order levels of stratigraphic cyclicity. On the basis of these data, the succession can be divided into two second‐order depositional sequences (DS‐1 and DS‐2), incorporating three system tracts in a lowstand to transgressive to highstand system tract succession (LST–TST–HST). These sequences are composed of fluvial systems at the base with palaeocurrents that flowed westward and south‐westward. The upper part of DS‐1 (Late Albian–Middle Turonian) shows evidence of intertidal to subtidal and offshore deposits. DS‐2 (Late Turonian–Campanian) comprises intertidal to subtidal, tidal flat, shallow marine and lacustrine deposits and interbedded fluvial deposits. Two regressive–transgressive cycles occurred in the area related to eustatic controls. The evolution of the basin can be explained by base‐level changes and associated shifts in depositional trends of successive retrogradational episodes. By using isobath and isopach maps, the main palaeogeographic features of DS‐1 and DS‐2 were constrained, namely coastline positions, the existence and orientation of corridors through which fluvial networks were channelled and the location of the main depocentres of the basin. Sedimentation on the Upper Cretaceous marine platform was mainly controlled by (i) oscillations of sea level and (ii) the orientation of Mesozoic faults, which induced sedimentation along depocentres. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

6.
云南兰坪盆地三叠纪沉积作用与古地理演化   总被引：3，自引：0，他引：3       下载免费PDF全文
根据岩石沉积类型、物源供给、成因机制和沉积序列 ,结合区域地质特征 ,将兰坪盆地三叠系划分为陆相火山泥石流、河流相、三角洲相、潮坪相、浅海陆棚相、碳酸盐台地相和深水盆地相7种主要沉积类型。通过对沉积相的详细分析 ,恢复其古地理格架和面貌 ,探讨岩相古地理的变迁历史 ,从而表明三叠纪早期到晚期 ,其古地理经历了陆相环境→碎屑海盆→碳酸盐海盆到碎屑海盆的转换 ,即两次海侵 海退旋回。早期的海域分布范围较小 ,晚期的海域分布范围较宽 ,并成为统一的海盆。  相似文献   

7.
This study is focused on sedimentary environments, facies distribution, and sequence stratigraphy. The facies and sequence stratigraphic analyses of the Bahram Formation(middleelate Devonian) in southcentral Iran are based on two measured stratigraphic sections in the southern Tabas block. The Bahram Formation overlies red sandstones Padeha Formation in sections Hutk and Sardar and is overlain by Carboniferous carbonate deposits of Hutk Formation paraconformably, with a thickness of 354 and386 m respectively. Mixed siliciclastic and carbonate sediments are present in this succession. The field observations and laboratory studies were used to identify 14 micro/petrofacies, which can be grouped into 5 depositional environments: shore, tidal flat, lagoon, shoal and shallow open marine. A mixed carbonate-detrital shallow shelf is suggested for the depositional environment of the Bahram Formation which deepens to the east(Sardar section) and thins in southern locations(Hutk section). Three 3rdorder cyclic siliciclastic and carbonate sequences in the Bahram Formation and one sequence shared with the overlying joint with Hutk Formation are identified, on the basis of shallowing upward patterns in the micro/pertofacies.  相似文献   

8.
To understand the depositional processes and environmental changes during the initial flooding of the North China Platform, this study focuses on the Lower to Middle Cambrian Zhushadong and Mantou formations in Shandong Province, China. The succession in the Jinan and Laiwu areas comprises mixed carbonate and siliciclastic deposits composed of limestone, dolostone, stromatolite, thrombolite, purple and grey mudstone, and sandstone. A detailed sedimentary facies analysis of seven well‐exposed sections suggests that five facies associations are the result of an intercalation of carbonate and siliciclastic depositional environments, including local alluvial fans, shallowing‐upward carbonate–siliciclastic peritidal cycles, oolite dominant shoals, shoreface and lagoonal environments. These facies associations successively show a transition from an initially inundated tide‐dominated carbonate platform to a wave‐dominated shallow marine environment. In particular, the peritidal sediments were deposited during a large number of depositional cycles. These sediments consist of lime mudstone, dolomite, stromatolite and purple and grey mudstones. These shallowing‐upward cycles generally resulted from carbonate production in response to an increase of accommodation during rising sea‐level. The carbonate production was, however, interrupted by frequent siliciclastic input from the adjacent emergent archipelago. The depositional cycles thus formed under the influence of both autogenetic changes, including sediment supply from the archipelago, and allogenic control of relative sea‐level rise in the carbonate factory. A low‐relief archipelago with an active tidal regime allowed the development of tide‐dominated siliciclastic and carbonate environments on the vast platform. Siliciclastic input to these tidal environments terminated when most of the archipelago became submerged due to a rapid rise in sea‐level. This study provides insights on how a vast Cambrian carbonate platform maintained synchronous sedimentation under a tidal regime, forming distinct cycles of mixed carbonates and siliciclastics as the system kept up with rising relative sea‐level during the early stage of basin development in the North China Platform.  相似文献   

9.
The study area is located in the east Tabas Block in Central Iran. Facies analysis of the Qal’eh Dokhtar Formation (middle Callovian to late Oxfordian) was carried out on two stratigraphic sections and applied to depositional environment and sequence stratigraphy interpretation. This formation conformably overlies and underlies the marly-silty Baghamshah and the calcareous Esfandiar formations, respectively. Lateral and vertical facies changes documents low- to high energy environments, including tidal-flat, beach to intertidal, lagoon, barrier, and open-marine. According to these facies associations and absence of resedimentation deposits a depositional model of a mixed carbonate–siliciclastic ramp was proposed for the Qal’eh Dokhtar Formation. Seven third-order depositional sequences were identified in each two measured stratigraphic sections. Transgressive systems tracts (TSTs) show deepening upward trends, i.e. shallow water beach to intertidal and lagoonal facies, while highstand systems tracts (HST) show shallowing upward trends in which deep water facies are overlain by shallow water facies. All sequence boundaries (except at the base of the stratigraphic column) are of the no erosional (SB2) types. We conclude eustatic rather than tectonic factors played a dominant role in controlling carbonate depositional environments in the study area.  相似文献   

10.
The Lower Jurassic Mashabba Formation crops out in the core of the doubly plunging Al-Maghara anticline, North Sinai, Egypt. It represents a marine to terrestrial succession deposited within a rift basin associated with the opening of the Neotethys. Despite being one of the best and the only exposed Lower Jurassic strata in Egypt, its sedimentological and sequence stratigraphic framework has not been addressed yet. The formation is subdivided informally into a lower and upper member with different depositional settings and sequence stratigraphic framework. The sedimentary facies of the lower member include shallow-marine, fluvial, tidal flat and incised valley fill deposits. In contrast, the upper member consists of strata with limited lateral extension including fossiliferous lagoonal limestones alternating with burrowed deltaic sandstones. The lower member contains three incomplete sequences (SQ1-SQ3). The depositional framework shows transgressive middle shoreface to offshore transition deposits sharply overlain by forced regressive upper shoreface sandstones (SQ1), lowstand fluvial to transgressive tidal flat and shallow subtidal sandy limestones (SQ2), and lowstand to transgressive incised valley fills and shallow subtidal sandy limestones (SQ3). In contrast, the upper member consists of eight coarsening-up depositional cycles bounded by marine flooding surfaces. The cycles are classified as carbonate-dominated, siliciclastic-dominated, and mixed siliciclastic-carbonate. The strata record rapid changes in accommodation space. The unpredictable facies stacking pattern, the remarkable rapid facies changes, and chaotic stratigraphic architecture suggest an interplay between allogenic and autogenic processes. Particularly syndepositional tectonic pulses and occasional eustatic sea-level changes controlled the rate and trends of accommodation space, the shoreline morphology, the amount and direction of siliciclastic sediment input and rapid switching and abandonment of delta systems.  相似文献   

11.
The upper portion of the Cuyo Group in the Zapala region, south‐eastern Neuquén Basin (Western Argentina), encompasses marine and transitional deposits (Lajas Formation) overlain by alluvial rocks (Challacó Formation). The Challacó Formation is covered by the Mendoza Group above a second‐order sequence boundary. The present study presents the stratigraphic framework and palaeophysiographic evolution of this Bajocian to Eo‐Calovian interval. The studied succession comprises the following genetic facies associations: (i) offshore and lower shoreface–offshore transition; (ii) lower shoreface; (iii) upper shoreface; iv) intertidal–subtidal; (v) supratidal–intertidal; (vi) braided fluvial to delta plain; (vii) meandering river; and (viii) braided river. The stratigraphic framework embraces four third‐order depositional sequences (C1 to C4) whose boundaries are characterized by the abrupt superposition of proximal over distal facies associations. Sequences C1 to C3 comprise mostly littoral deposits and display well‐defined, small‐scale transgressive–regressive cycles associated with fourth‐order depositional sequences. Such high‐frequency cycles are usually bounded by ravinement surfaces associated with transgressive lags. At last, the depositional sequence C4 delineates an important tectonic reorganization probably associated with an uplift of the Huincul Ridge. This is suggested by an inversion of the transport trend, north‐westward during the deposition of C1 to C3 depositional sequences (Lajas Formation) to a south‐west trend during the deposition of the braided fluvial strata related to the C4 depositional sequence (Challacó Formation).  相似文献   

12.
Palaeogene passive margin sediments on the US mid‐Atlantic coastal plain provide valuable insight into facies interaction and distribution on mixed carbonate–siliciclastic shelves. This study utilizes well cuttings, outcrop, core, and seismic data to document temporal and spatial variations in admixed bryozoan‐rich skeletal carbonates and sandy siliciclastic units that were deposited on a humid passive margin located in the vicinity of a major marine transition zone. This zone was situated between north‐flowing, warm waters of the ancestral Gulf Stream (carbonate dominated settings) and south‐flowing, cold waters of the ancestral Labrador Current (siliciclastic dominated settings). Some degree of mixing of carbonates and siliciclastics occurs in all facies; however, siliciclastic‐prone sediments predominate in nearshore settings, while carbonate‐prone sediments are more common in more open marine settings of the inner shelf break and deep shelf. A distinctive dual‐break shelf depositional profile originated following a major Late Cretaceous to Palaeocene transgression that drowned the earlier shallow platform. This profile was characterized by prominent mid‐shelf break dividing the shallow shelf from the deep shelf and a major continental shelf/slope break. Incomplete filling of available accommodation space during successive buildup of the shallow shelf preserved the topographic break on this passive margin. Storm wave base also contributed to the preservation of the dual‐break shelf geometry by beveling shallow shelf sediments and transporting them onto and seaward of the mid‐shelf break. Sediment fines in deep shelf facies were produced in place, transported downdip from the shallow shelf by storm ebb currents and boundary currents, and reworked from adjacent areas of the deep shelf by strike‐parallel boundary currents. Regional climate and boundary currents controlled whether carbonate or siliciclastic material was deposited on the shelf, with warmer waters and more humid climates favouring carbonate deposition and cooler, more arid conditions favouring glaucony and siliciclastic dominated deposition. Continuous wave and current sweeping of the shallow shelf favoured deposition of mud‐lean facies across much of the shallow shelf. Skeletal components in much of the carbonate‐rich strata formed in warm, nutrient‐rich subtropical waters, as indicated by widespread occurrences of larger benthic foraminifera and molluscan assemblages. These indicators of warm water deposition within the bryozoan‐mollusk‐rich carbonate assemblage on this shelf provide an example of a warm water bryomol assemblage; such facies generally are associated with cooler water depositional settings.  相似文献   

13.
Upper Callovian to Tithonian (late Jurassic) sediments represent an important hydrocarbon reservoir in the Kopet‐Dagh Basin, NE Iran. These deposits consist mainly of limestone, dolostone, and calcareous mudstone with subordinate siliciclastic interbeds. Detailed field surveys, lithofacies and facies analyses at three outcrop sections were used to investigate the depositional environments and sequence stratigraphy of the Middle to Upper Jurassic interval in the central and western areas of the basin. Vertical and lateral facies changes, sedimentary fabrics and structures, and geometry of carbonate bodies resulted in recognition of various carbonate facies related to tidal flats, back‐barrier lagoon, shelf‐margin/shelf‐margin reef, slope and deep‐marine facies belts. These facies were accompanied by interbedded beach and deep marine siliciclastic petrofacies. Field surveys, facies analysis, parasequences stacking patterns, discontinuity surfaces, and geometries coupled with relative depth variation, led to the recognition of six third‐order depositional sequences. The depositional history of the study areas can be divided into two main phases. These indicate platform evolution from a rimmed‐shelf to a carbonate ramp during the late Callovian–Oxfordian and Kimmeridgian–Tithonian intervals, respectively. Significant lateral and vertical facies and thickness changes, and results obtained from regional correlation of the depositional sequences, can be attributed to the combined effect of antecedent topography and differential subsidence related to local tectonics. Moreover, sea‐level changes must be regarded as a major factor during the late Callovian–Tithonian interval. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

14.
The Pliocene Norwest Bend Formation is a well‐preserved succession of terrestrial and shallow‐marine deposits in the Murray Basin, South Australia. Sediments in this unit consist of two discrete terrigenous clastic‐rich, decametre‐scale sequences, or informal members, which record episodes of marine incursion during the Early and Late Pliocene respectively. The base of each sequence is a transgressive lag and/or strandline deposit that is transitional upwards into a highstand, subtidal, terrigenous clastic and cool‐water carbonate sediment accumulation. The top of each sequence is incised by fluvial channels that are filled by river deposits which formed as relative sea‐level fell and terrestrial environments prograded basinward. Sedimentological data suggest that gross stratigraphic architecture was primarily determined by glacioeustasy. Differences in sedimentary style between these two sequences, however, reflect a major climatic change that took place in southern Australia during the mid‐Pliocene. The lower quartzose sand member is formed of siliciclastic sediment derived from prolonged, deep, subaerial weathering and contains a bivalve‐dominated, cool‐temperate, open‐marine mollusc assemblage. These sediments accumulated under an equitable, relatively warm, humid climate. The Murray Basin during this time, because of high fluvial discharge, was a salt‐wedge estuary with typical estuarine circulation. In contrast, the upper, oyster‐rich member is typified by large monospecific oyster buildups that grew in restricted coastal environments. Strandline deposits contain a warm‐temperate skeletal assemblage. Contemporaneous aeolian sediments accumulated under warm, semi‐arid climatic conditions. Well‐developed ferricrete, silcrete and calcrete horizons reflect cyclic conditions of rainwater infiltration and evaporation in the seasonally dry climate that typifies southern Australia today. Highly seasonal rainfall produced an estuary that fluctuated annually from being well to partially mixed. These Pliocene sediments support the notion that mollusc‐rich facies are the signature of cool‐water carbonate accumulations in inboard neritic environments. Unlike bryozoans that dominate the outer parts of Cenozoic cool‐water carbonate shelves, molluscs evolved to exploit an array of coastal ecosystems with wide salinity variations and variable sedimentation rates.  相似文献   

15.
The Kashafrud Formation was deposited in the extensional Kopeh-Dagh Basin during the Late Bajocian to Bathonian (Middle Jurassic) and is potentially the most important siliciclastic unit from NE Iran for petroleum geology. This extensional setting allowed the accumulation of about 1,700 m of siliciclastic sediments during a limited period of time (Upper Bajocian–Bathonian). Here, we present a detailed facies analysis combined with magnetic susceptibility (MS) results focusing on the exceptional record of the Pol-e-Gazi section in the southeastern part of the basin. MS is classically interpreted as related to the amount of detrital input. The amount of these detrital inputs and then the MS being classically influenced by sea-level changes, climate changes and tectonic activity. Facies analysis reveals that the studied rocks were deposited in shallow marine, slope to pro-delta settings. A major transgressive–regressive cycle is recorded in this formation, including fluvial-dominated delta to turbiditic pro-delta settings (transgressive phase), followed by siliciclastic to mixed siliciclastic and carbonate shoreface rocks (regressive phase). During the transgressive phase, hyperpycnal currents were feeding the basin. These hyperpycnal currents are interpreted as related to important tectonic variations, in relation to significant uplift of the hinterland during opening of the basin. This tectonic activity was responsible for stronger erosion, providing a higher amount of siliciclastic input into the basin, leading to a high MS signal. During the regressive phase, the tectonic activity strongly decreased. Furthermore, the depositional setting changed to a wave- to tide-dominated, mixed carbonate–siliciclastic setting. Because of the absence of strong tectonic variations, bulk MS was controlled by other factors such as sea-level and climatic changes. Fluctuations in carbonate production, possibly related to sea-level variations, influenced the MS of the siliciclastic/carbonate cycles. Carbonate intervals are characterized by a strong decrease of MS values indicates a gradual reduction of detrital influx. Therefore, the intensity of tectonic movement is thought to be the dominant factor in controlling sediment supply, changes in accommodation space and modes of deposition throughout the Middle Jurassic sedimentary succession in the Pol-e-Gazi section and possibly in the Kopeh-Dagh Basin in general.  相似文献   

16.
The Neoproterozoic and Palaeozoic Taoudeni basin forms the flat-lying and unmetamorphosed sedimentary cover of the West African Craton. In the western part of this basin, the Char Group and the lower part of the Atar Group make up a 400-m-thick Neoproterozoic siliciclastic succession which rests on the Palaeoproterozoic metamorphic and granitic basement. Five erosional bounding surfaces of regional extent have been identified in this succession. These surfaces separate five stratigraphic units with lithofacies associations ranging from fluvial to coastal and fluvial-, tide-, or wave-dominated shallow marine deposits. Owing to their regional extent and their position within the succession, the erosive bounding surfaces correspond to relative sea-level falls, and accordingly the five stratigraphic units they bound represent allocyclic transgressive–regressive depositional sequences (S1–S5). Changes in the nature of the deposits forming the transgressive–regressive cycles reflect landward or seaward shifts of the stacked sequences. These successive relative sea-level changes are related to the reactivation of basement faults and tilting during rifting of the Pan-Afro-Brasiliano supercontinent 1000 m.y. ago. The stromatolite bearing carbonate-shale sequences which form the rest of the Atar Group mark the onset of a quiet period of homogeneous subsidence contemporaneous with the Pan-African I oceanization 800–700 m.y. ago.  相似文献   

17.
In Eastern Sardinia during the early Middle Jurassic, Alpine Tethys opening triggered the rise of a temporary tectonic high. The high collapsed rapidly, was fragmented into separate blocks, and subsequently covered by continental, transitional, and finally shallow marine deposits forming a narrow depositional system comprising the Genna Selole Fm. Present‐day exposures in the southern part of the palaeo‐high allow the sedimentological evolution of the transgressive cover sequence to be ascertained. Initial terrestrial deposits comprise alluvial fan deposits located at the mouths of palaeovalleys. These pass into braid‐deltas and in the coastal areas located between adjacent valleys mouths, palustrine and coastal plain tidally‐influenced environments developed. These environments interfingered laterally and passed seaward into a transitional, siliciclastic to carbonate tidal environment. With the collapse of the tectonic high, the continental to transitional environments were transgressed with deposition of marine carbonates. A comparison with similar coeval deposits of the W‐Mediterranean domain has been undertaken. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

18.
The Middle Devonian Narva succession in the Baltic Basin represents a significant turnaround in the history of the basin. The detailed study of core and outcrop sections and the three‐dimensional correlations across the Baltic Basin reveal a carbonate‐dominated, mixed retrogressive succession, overlain by a siliciclastic‐dominated, progradational succession. The palaeogeographic reconstructions show how the shallow, tide‐influenced basin expanded from south‐west to north‐east and, later during the transgression, also to the north, south and east. The transgressive portion of the basin fill is dominated by carbonate‐rich sabkha and supratidal to intertidal deposits on the basin margins, and subtidal carbonates in the basin centre. Siliciclastic material was derived by tidal currents and storm waves from the south‐west through a tidal inlet and flood‐tidal delta complex. This initial transgressive phase is characterized by the lack of subsidence or even episodic uplifts in the northern/north‐western part of the basin margin, shown by convergence of timelines and the thin (30 m) transgressive succession. In contrast, on the southern margin, the facies associations stack vertically into a 70 to 80 m thick succession, indicating significantly higher subsidence rates. The upper part of the transgressive phase indicates subsidence across the whole basin. The upper, progradational portion of the basin fill is dominated by coarse, siliciclastic, tide‐influenced deltaic deposits that rapidly prograded from north‐west to south‐east. This detailed study on the Narva succession shows that siliciclastic and carbonate deposition was coeval and that mixing occurred at different temporal and spatial scales. The mixing was controlled by grain‐size, volume and location of siliciclastic input rather than relative sea‐level changes as suggested in widely used reciprocal mixing models. It is suggested that the forebulge of the Scandinavian Caledonian fold‐and‐thrust belt migrated to the north‐western margin of the Baltic Basin during the earliest Eifelian, as indicated by the lack of subsidence and probable uplift in the northern/north‐western margin during the early transgressive phase. The forebulge migration ceased although the forebulge had already started to subside during the later stages of the transgressive phase. The deltaic progradation is interpreted to be associated with the orogenic collapse and uplift in the Scandinavian Caledonides that caused the erosion of the foreland basin fill and the coarse sediment transport into the Baltic Basin.  相似文献   

19.
Abstract The Infra Krol Formation and overlying Krol Group constitute a thick (< 2 km), carbonate-rich succession of terminal Proterozoic age that crops out in a series of doubly plunging synclines in the Lesser Himalaya of northern India. The rocks include 18 carbonate and siliciclastic facies, which are grouped into eight facies associations: (1) deep subtidal; (2) shallow subtidal; (3) sand shoal; (4) peritidal carbonate complex; (5) lagoonal; (6) peritidal siliciclastic–carbonate; (7) incised valley fill; and (8) karstic fill. The stromatolite-rich, peritidal complex appears to have occupied a location seaward of a broad lagoon, an arrangement reminiscent of many Phanerozoic and Proterozoic platforms. Growth of this complex was accretionary to progradational, in response to changes in siliciclastic influx from the south-eastern side of the lagoon. Metre-scale cycles tend to be laterally discontinuous, and are interpreted as mainly autogenic. Variations in the number of both sets of cycles and component metre-scale cycles across the platform may result from differential subsidence of the interpreted passive margin. Apparently non-cyclic intervals with shallow-water features may indicate facies migration that was limited compared with the dimensions of facies belts. Correlation of these facies associations in a sequence stratigraphic framework suggests that the Infra Krol Formation and Krol Group represent a north- to north-west-facing platform with a morphology that evolved from a siliciclastic ramp, to carbonate ramp, to peritidal rimmed shelf and, finally, to open shelf. This interpretation differs significantly from the published scheme of a basin centred on the Lesser Himalaya, with virtually the entire Infra Krol–Krol succession representing sedimentation in a persistent tidal-flat environment. This study provides a detailed Neoproterozoic depositional history of northern India from rift basin to passive margin, and predicts that genetically related Neoproterozoic deposits, if they are present in the High Himalaya, are composed mainly of slope/basinal facies characterized by fine-grained siliciclastic and detrital carbonate rocks, lithologically different from those of the Lesser Himalaya.  相似文献   

20.
The Lower Ordovician Shirgesht Formation in central Iran is composed of siliciclastic and carbonate rocks deposited in diverse coastal and marine shelfal environments (tidal flat, lagoon, shoreface, offshore-shelf and carbonate ramp). Five facies associations contain diverse ichnofossil assemblages that show distinct proximal to distal trends formed in a wide range of physical-chemical conditions. The ethological groups of trace fossils in the Shirgesht Formation reflect a gradient of depositional stress conditions across a wave-influenced shoreline and shelf. Deposits of wave-influenced environments make up a significant component of the geological record of shallow marine settings, and the ability to determine paleoenvironments in detail in such successions is critical for reconstruction of depositional histories and sequence-stratigraphic interpretation.The Cruziana ichnofacies of the study shows highly diverse suites that record the establishment of a benthic community under stable conditions and a long-term colonization window. The Skolithos ichnofacies recognized is a low diversity opportunistic ichnocommunity suite that resulted from colonization after tempestite deposition in a stressed environment. The strata record an onshore to offshore replacement of the Cruziana ichnofacies (with abundant feeding traces of deposit-feeders) by the Skolithos ichnofacies (dominated by suspension-feeders and predators). A transitional zone between the two ichnofacies coincides with the offshore-transition/distal lower-surface deposits. The distribution of ichnofacies, the diversity and range of ethological characteristics reflected by the ichnogenera, and the wide range of wave-dominated coastal facies demonstrate the potential to use individual trace fossils and ichnofacies for significantly refined palaeoenvironmental analysis of wave-dominated coastal settings, particularly in Ordovician successions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号