首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
《Quaternary Science Reviews》2007,26(13-14):1861-1870
Pyroclastic fall deposits of the paired Rotoiti and Earthquake Flat eruptions from the Taupo Volcanic Zone (New Zealand) combine to form a widespread isochronous horizon over much of northern New Zealand and the southwest Pacific. This horizon is important for correlating climatic and environmental changes during the Last Glacial period, but has been the subject of numerous disparate age estimates between 35.1±2.8 and 71±6 ka (all errors are 1 s.d.), obtained by a variety of techniques. A potassium–argon (K–Ar) age of 64±4 ka was previously determined on bracketing lavas at Mayor Island volcano, offshore from the Taupo Volcanic Zone. We present a new, more-precise 40Ar/39Ar age determination on a lava flow on Mayor Island, that shortly post-dates the Rotoiti/Earthquake Flat fall deposits, of 58.5±1.1 ka. This value, coupled with existing ages from underlying lavas, yield a new estimate for the age of the combined eruptions of 61.0±1.4 ka, which is consistent with U–Th disequilibrium model-age data for zircons from the Rotoiti deposits. Direct 40Ar/39Ar age determinations of plagioclase and biotite from the Rotoiti and Earthquake Flat eruption products yield variable values between 49.6±2.8 and 125.3±10.0 ka, with the scatter attributed to low radiogenic Ar yields, and/or alteration, and/or inheritance of xenocrystic material with inherited Ar. Rotoiti/Earthquake Flat fall deposits occur in New Zealand in association with palynological indicators of mild climate, attributed to Marine Isotope Stage (MIS) 3 and thus used to suggest an age that is post-59 ka. The natures of the criteria used to define the MIS 4/3 boundary in the Northern and Southern hemispheres, however, imply that the new 61 ka age for the Rotoiti/Earthquake Flat eruption deposits will provide the inverse, namely, a more accurate isochronous marker for correlating diverse changes across the MIS 4/3 boundary in the southwest Pacific.  相似文献   

2.
The Lanping basin is a significant Pb–Zn–Cu–Ag mineralization belt of the Sanjiang Tethyan metallogenic province in China. Over 100 thrust-controlled, sediment-hosted, Himalayan base metal deposits have been discovered in this basin, including the largest sandstone-hosted Pb–Zn deposit in the world (Jinding), and several Cu ± Ag ± Co deposits (Baiyangping, Baiyangchang and Jinman). These deposits, with total reserves of over 16.0 Mt Pb + Zn, 0.6 Mt Cu, and 7000 t Ag, are mainly hosted in Meso-Cenozoic mottled clastic rocks, and strictly controlled by two Cenozoic thrust systems developed in the western and eastern segments of the Lanping basin.To define the metallogenic history of the study area, we dated nine calcite samples associated with copper sulfides from the Jinman Cu deposit by the Sm–Nd method and five molybdenite samples from the Liancheng Cu–Mo deposit by the Re–Os method. The calcite Sm–Nd age for the Jinman deposit (58 ± 5 Ma) and the molybdenite Re–Os age for the Liancheng deposit (48 ± 2 Ma), together with previously published chronological data, demonstrate (1) the Cu–Ag mineralization in the western Lanping basin mainly occurred in three episodes (i.e., ∼56–54, 51–48, and 31–29 Ma), corresponding to the main- and late-collisional stages of the Indo–Asian orogeny; and (2) the Pb–Zn–Ag (±Cu) mineralization in the eastern Lanping basin lacked precise and direct dating, however, the apatite fission track ages of several representative deposits (21 ± 4 Ma to 32 ± 5 Ma) may offer some constraints on the mineralization age.  相似文献   

3.
The Urals can be regarded as a significant Cu-Mo-porphyry province, hosting over 30 porphyry deposits. Although their geological structure and ore-forming processes have been studied in great detail, uncertainty remains about their age and related geotectonic setting. In this contribution we report for the first time the Re-Os dating of molybdenites from three Cu-Mo porphyry deposits, namely Kalinovskoe, Mikheevskoe and Talitsa. Three molybdenite samples from the Kalinovskoe deposit yield Silurian Re-Os ages ranging from 427.1 Ma to 431.7 Ma (mean 429.8 ± 4.8 Ma; 2σ standard deviation), and a Re–Os isochron age of 430.7 ± 1.3 Ma (MSWD = 0.63), which coincides with previous U-Pb zircon dating of ore-hosting diorites from the same ore field (427 ± 6 Ma). The molybdenite from the Mikheevskoe deposit gives Re-Os ages of 357.8 ± 1.8 Ma and 356.1 ± 1.4 Ma (mean 357.0 ± 2.4 Ma; Carboniferous/Tournaisian), which corresponds to previous U-Pb dating of zircons from the diorite hosting porphyry deposit (356 ± 6 Ma). The molybdenite from Talitsa Mo-porphyry deposit yields the youngest Re-Os ages of 298.3 ± 1.3 and 299.9 ± 2.9 Ma (mean 299.1 ± 2.3 Ma) at Carboniferous-Permian boundary. Thus, the studied Cu and Mo porphyry deposits are not synchronous and belong to distinct tectonic events of the Urals.  相似文献   

4.
《Ore Geology Reviews》2007,30(3-4):307-324
The area of the Middle–Lower Yangtze River valley, Eastern China, extending from Wuhan (Hubei province) to western Zhenjiang (Jiangsu province), hosts an important belt of Cu–Au–Mo and Fe deposits. There are two styles of mineralization, i.e., skarn/porphyry/stratabound Cu–Au–Mo–(Fe) deposits and magnetite porphyry deposits in several NNE-trending Cretaceous fault-bound volcanic basins. The origin of both deposit systems is much debated. We dated 11 molybdenite samples from five skarn/porphyry Cu–Au–Mo deposits and 5 molybdenite samples from the Datuanshan stratabound Cu–Au–Mo deposit by ICP-MS Re–Os isotope analysis. Nine samples from the same set were additionally analyzed by NTIMS on Re–Os. Results from the two methods are almost identical. The Re–Os model ages of 16 molybdenite samples range from 134.7 ± 2.3 to 143.7 ± 1.6 Ma (2σ). The model ages of the five samples from the Datuanshan stratabound deposit vary from 138.0 ± 3.2 to 140.8 ± 2.0 Ma, with a mean of 139.3 ± 2.6 Ma; their isochron age is 139.1 ± 2.7 Ma with an initial Os ratio of 0.7 ± 8.1 (MSWD = 0.29). These data indicate that the porphyry/skarn systems and the stratabound deposits have the same age and suggest an origin within the same metallogenic system. Albite 40Ar/39Ar dating of the magnetite porphyry deposits indicates that they formed at 123 to 125 Ma, i.e., 10–20 Ma later. Both mineralization styles characterize transitional geodynamic regimes, i.e., the period around 140 Ma when the main NS-trending compressional regime changed to an EW-trending lithospheric extensional regime, and the period of 125–115 Ma of dramatic EW-trending lithospheric extension.  相似文献   

5.
The Gejiu tin-polymetallic deposits in the Western Cathaysia Block of South China comprise the world's largest primary tin district, with a total resource of approximately 300 million metric ton ores, at an average grade of 1 wt percent Sn. Tin polymetallic mineralization occurs in five deposits and has four ore types, i.e., greisen, skarn, stratabound cassiterite-sulfide (mostly oxidized) and vein type ore. In each deposit the orebodies typically occur in an extensive hydrothermal system centered on a shallow Late Cretaceous granitoid cupola. Metal zoning is well developed both vertically and horizontally over the entire district, from W + Be + Bi ± Mo ± Sn ores inside granite intrusions, to Sn + Cu-dominated ores at intrusion margins and farther out to Pb + Zn deposits in the surrounding host carbonate. This zoning pattern is similar to that of other hydrothermal deposits in other parts of the world, indicating a close genetic relationship between magmatism and mineralization. In this paper, we dated thirteen mica samples from all types of mineralization and from the five deposits in the Gejiu district. The ages range from 77.4 ± 0.6 Ma to 95.3 ± 0.7 Ma and are similar to the existing zircon U–Pb age of the granitic intrusions (77.4 ± 2.5–85.8 ± 0.6), indicating a genetic relationship between the mineralization and the intrusions. Geological characteristics, metal zoning patterns and new geochronological data all indicate that the tin-polymetallic ores in the Gejiu district are hydrothermal in origin and are genetically related to the nearby granitic intrusions. It is unlikely that the deposits are syngenetic, as has been proposed in recent years.  相似文献   

6.
The Tonglushan ore district in the Middle–Lower Yangtze River Valley metallogenic belt includes the Tonglushan Cu–Fe, the Jiguanzui Au–Cu, and the Taohuazui Au–Cu skarn deposits. They are characterized by NE-striking ore bodies and hosted at the contact of Triassic carbonate rocks and Late Mesozoic granitoid deposits. New Sensitive High-Resolution Ion Microprobe (SHRIMP) and Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA–ICP-MS) zircon U–Pb, molybdenite Re–Os, and phlogopite 40Ar–39Ar ages indicate that these skarn deposits formed between 140.3 ± 1.1 and 137.3 ± 2.4 Ma. These dates are identical to the zircon U–Pb ages for host quartz diorites ranging from 140 ± 2 to 139 ± 1 Ma. These results confirm that both skarn mineralization and related intrusions were initiated during the Early Cretaceous. The high rhenium contents (261.4–1152 μg/g) of molybdenites indicate that a metasomatic mantle fluid was involved in the ore-forming process of these skarn ore systems. This conclusion is consistent with previously published constraints from sulfur, deuterium, and oxygen isotope compositions, and the geochemical signatures, and Sr–Nd isotopic data of the mineralization-hosting intrusions. Geological and geochronological evidence demonstrates that there were two igneous events in the Tonglushan ore district. The first resulted in the emplacement of quartz diorite during the Early Cretaceous (140 ± 2 to 139 ± 1 Ma), and the second is characterized by the eruption of volcanic rocks during the mid-Early Cretaceous (130 ± 2 to 124 ± 2 Ma). The former is spatially, temporally and genetically associated with skarn gold-bearing mineralization (140.3 ± 1.1 to 137.3 ± 2.4 Ma). The recognition of these two igneous events invalidates previous models that proposed continuous magmatism and associated mineral deposits in the Middle–Lower Yangtze River Valley metallogenic belt.  相似文献   

7.
《Quaternary Science Reviews》2007,26(17-18):2090-2112
The geomorphology and morphostratigraphy of numerous worldwide sites reveal the relative movements of sea level during the peak of the Last Interglaciation (Marine Isotope Stage (MIS) 5e, assumed average duration between 130±2 and 119±2 ka). Because sea level was higher than present, deposits are emergent, exposed, and widespread on many stable coastlines. Correlation with MIS 5e is facilitated by similar morphostratigraphic relationships, a low degree of diagenesis, uranium–thorium (U/Th) ages, and a global set of amino-acid racemization (AAR) data. This study integrates information from a large number of sites from tectonically stable areas including Bermuda, Bahamas, and Western Australia, and some that have experienced minor uplift (∼2.5 m/100 ka), including selected sites from the Mediterranean and Hawaii. Significant fluctuations during the highstand are evident at many MIS 5e sites, revealed from morphological, stratigraphic, and sedimentological evidence. Rounded and flat-topped curves derived only from reef tracts are incomplete and not representative of the entire interglacial story. Despite predictions of much different sea-level histories in Bermuda, the Bahamas, and Western Australia due to glacio- and hydro-isostatic effects, the rocks from these sites reveal a nearly identical record during the Last Interglaciation.The Last Interglacial highstand is characterized by several defined sea-level intervals (SLIs) that include: (SLI#1) post-glacial (MIS 6/5e Termination II) rise to above present before 130 ka; (SLI#2) stability at +2 to +3 m for the initial several thousand years (∼130 to ∼125 ka) during which fringing reefs were established and terrace morphology was imprinted along the coastlines; (SLI#3) a brief fall to near or below present around 125 ka; (SLI#4) a secondary rise to and through ∼+3–4 m (∼124 to ∼122 ka); followed by (SLI#5) a brief period of instability (∼120 ka) characterized by a rapid rise to between +6 to +9 m during which multiple notches and benches were developed; and (SLI#6) an apparently rapid descent of sea level into MIS 5d after 119 ka. U/Th ages are used to confirm the Last Interglacial age of the deposits, but unfortunately, in only two cases was it possible to corroborate the highstand subdivisions using radiometric ages.Sea levels above or at present were relatively stable during much of early MIS 5e and the last 6–7 ka of MIS 1, encouraging a comparison between them. The geological evidence suggests that significant oceanographic and climatic changes occurred thereafter, midway through, and continuing through the end of MIS 5e. Fluctuating sea levels and a catastrophic termination of MIS 5e are linked to the instability of grounded and marine-based ice sheets, with the Greenland (GIS) and West Antarctic (WAIS) ice sheets being the most likely contributors. Late MIS 5e ice volume changes were accompanied by oceanographic reorganization and global ecological shifts, and provide one ominous scenario for a greenhouse world.  相似文献   

8.
《Quaternary Science Reviews》2007,26(22-24):2937-2957
We present a brief synthesis of the Quaternary fluvial record in the Lower Tagus Basin (central Portugal), concentrating on factors controlling infill and incision. The Holocene part of the record forms the focus of this paper and guides the questioning of the basic assumptions of the established Quaternary fluvial evolution model, in particular the link between sea-level change and fluvial incision-deposition. We suggest that several incision-aggradation phases may have occurred during glacial periods. Major aggradation events may overlap with cold episodes, while incision appears to concentrate on the warming limb of climate transitions. The complex stratigraphy of the Quaternary record in the Lower Tagus valley is influenced by repeated base-level and climate changes.This paper submits the first chronostratigraphic framework for valley fill deposits in the Lower Tagus area. Sea-level rise forced aggradation and controlled deposition of the fine-grained sedimentary wedge underlying the low-gradient Lower Tagus floodplain. Investigations have focused on the lower Muge tributary, where rapidly aggrading estuarine and fluvial environments were abruptly established (∼8150 cal BP) as sea level rose. Base level at the valley mouth controlled the upstream extent of the fine-grained backfill. Tidal environments disappeared abruptly (∼5800 cal BP) when the open estuary at the Muge confluence was infilled by the Tagus River. The decrease and final still stand of sea-level rise led to floodplain stabilisation with peat (∼6400–5200 cal BP) and soil formation (∼5200–2200 cal BP). Localised renewed sedimentation (∼2200–200 cal BP) is linked to human activity.  相似文献   

9.
Formation of the Urals Volcanic-Hosted Massive Sulphide (VHMS) deposits is considered to be related with the intra-oceanic stage of the island arc(s) development in Late Ordovician – Middle Devonian time (ca. 460–385 Ma) based on the biostratigraphic record of ore-hosting sedimentary rocks. However, the known radiometric ages of ore hosting volcanics are very limited. Here we present direct dating results of sulphide mineralisation from the Yaman-Kasy and Kul-Yurt-Tau VHMS deposits using Re-Os isotope systematics showing similar mineralisation ages of 362 ± 9 Ma and 363 ± 1 Ma. These ages coincide with the previous Re-Os dating of the Alexandrinskoe (355 ± 15 Ma) and Dergamysh (366 ± 2 Ma) VHMS deposits. This Late Devonian (Famennian) age corresponds to the late stage of the ‘Magnitogorsk arc – Laurussia continent’ collision event and coincides with a beginning of large scale subduction-related granitoid magmatism. The younger mineralisation age relative to the biostratigraphic ages of host rocks is interpreted as one of the latest episodes of the multi-stage history of VHMS deposits development. Ar-Ar ages of sericites from metasomatic rocks of Barsuchi Log and Babaryk deposits show even younger ages clustering around 345 Ma, and testify another late hydrothermal event in the history of the Urals VHMS deposits.  相似文献   

10.
The Dabu Cu-Mo porphyry deposit is situated in the southern part of the Lhasa terrane within the post-collisional Gangdese porphyry copper belt (GPCB). It is one of several deposits that include the Qulong and Zhunuo porphyry deposits. The processes responsible for ore formation in the Dabu deposit can be divided into three stages of veining: stage I, quartz–K-feldspar (biotite) ± chalcopyrite ± pyrite, stage II, quartz–molybdenite ± pyrite ± chalcopyrite, and stage III, quartz–pyrite ± molybdenite. Three types of fluid inclusions (FIs) are present: liquid-rich two-phase (L-type), vapor-rich two-phase (V-type), and solid bearing multi-phase (S-type) inclusions. The homogenization temperatures for the FIs from stages I to III are in the ranges of 272–475 °C, 244–486 °C, and 299–399 °C, and their salinities vary from 2.1 to 49.1, 1.1 to 55.8, and 2.9 to 18.0 wt% NaCl equiv., respectively. The coexistence of S-type, V-type and L-type FIs in quartz of stage I and II with similar homogenization temperatures but contrasting salinities, indicate that fluid boiling is the major factor controlling metal precipitation in the Dabu deposit. The ore-forming fluids of this deposit are characterized by high temperature and high salinity, and they belong to a H2O–NaCl magmatic–hydrothermal system. The H–O–S–Pb isotopic compositions indicate that the ore metals and fluids came primarily from a magmatic source linked to Miocene intrusions characterized by high Sr/Y ratios, similar to other porphyry deposits in the GPCB. The fluids forming the Dabu deposit were rich in Na and Cl, derived from metamorphic dehydration of subducted oceanic slab through which NaCl-brine or seawater had percolated. The inheritance of ancient subduction-associated arc chemistry, without shallow level crustal assimilation and/or input of the meteoric water, was responsible for the generation of fertile magma, as well as CO2-poor and halite-bearing FIs associated with post-collisional porphyry deposits. The estimated mineralization depths of Qulong, Dabu and Zhunuo deposits are 1.6–4.3 km, 0.5–3.4 km and 0.2–3.0 km, respectively, displaying a gradual decrease from eastern to western Gangdese. Deep ore-forming processes accounted for the generation of giant-sized Qulong deposit, because the exsolution of aqueous fluids with large fraction of water and chlorine in deep or high pressure systems can extract more copper from melts than those formed in shallow systems. However, the formation of small-sized Dabu deposit can be explained by a single magmatic event without additional replenishment of S, metal, or thermal energy. In addition, the ore-forming conditions of porphyry Cu–Mo deposits in GPCB are comparable to those of porphyry Cu ± Au ± Mo deposits formed in oceanic subduction-related continental or island arcs, but differ from those of porphyry Mo deposit formed in the Dabie-Qinling collisional orogens. The depth of formation of the mineralization and features of primary magma source are two major controls on the metal types and ore-fluid compositions of these porphyry deposits.  相似文献   

11.
The Yunnan–Guizhou–Guangxi “golden triangle” is considered to be one of the regions hosting Carlin-like gold deposits in China. Gold deposits in this region can be grouped into lode type that are controlled by faults and layer-like type controlled by stratigraphy. Arsenopyrite is one of the major gold-bearing minerals in these deposits. Rhenium–Os isotopic dating of arsenopyrite from the lode type Lannigou and Jinya and the layer-like type Shuiyindong gold deposits yields isochron ages of 204 ± 19 Ma, 206 ± 22 Ma, and 235 ± 33 Ma, respectively. The data suggest that the Carlin-like gold deposits formed in Late Triassic to Early Jurassic, which is clearly earlier than the ca. 100–80 Ma acid to ultra-basic magmatism in this part of southwestern China. The ages are consistent with ore formation during a period of post-collisional lateral transpression, which is similar to that of the Carlin-like gold deposits in western Qinling of China, but quite different from Carlin-type gold deposits in Nevada, U.S.A.  相似文献   

12.
《Quaternary Science Reviews》2003,22(10-13):1207-1211
The time-integrated slip rate in fault zones can be determined if the deformed deposits are reliably dated. Here, we report optically stimulated luminescence (OSL) ages of Late Pleistocene fluvial deposits cut by the Wangsan fault, southeastern Korea, which displaces a hanging wall block of about 28 m. Five sandy samples of the deformed Quaternary deposits were dated by quartz OSL using the single aliquot regenerative-dose (SAR) protocol. Three samples taken from the footwall block show stratigraphically consistent OSL ages of 54±7, 76±5 and 90±6 ka, from top to bottom. Two samples collected from the same layer in the hanging wall block show reproducible OSL ages of 81±5 and 82±5 ka, which are also in good agreement with the stratigraphic relationships. Our OSL ages yield an average sedimentation rate of the Quaternary deposits as around 0.04 mm a−1, and a minimum value of time-integrated slip rate as 0.52 mm a−1. This minimum slip rate is considerably higher than those reported earlier for Quaternary faults in southeastern Korea. The youngest OSL age (54±7 ka) constrains the maximum value of the recurrence interval of the fault movement.  相似文献   

13.
The Northern Norrbotten Ore Province in northernmost Sweden includes the type localities for Kiruna-type apatite iron deposits and has been the focus for intense exploration and research related to Fe oxide-Cu-Au mineralisation during the last decades. Several different types of Fe-oxide and Cu-Au ± Fe oxide mineralisation occur in the region and include: stratiform Cu ± Zn ± Pb ± Fe oxide type, iron formations (including BIF's), Kiruna-type apatite iron ore, and epigenetic Cu ± Au ± Fe oxide type which may be further subdivided into different styles of mineralisation, some of them with typical IOCG (Iron Oxide-Copper-Gold) characteristics. Generally, the formation of Fe oxide ± Cu ± Au mineralisation is directly or indirectly dated between ~ 2.1 and 1.75 Ga, thus spanning about 350 m.y. of geological evolution.The current paper will present in more detail the characteristics of certain key deposits, and aims to put the global concepts of Fe-oxide Cu-Au mineralisations into a regional context. The focus will be on iron deposits and various types of deposits containing Fe-oxides and Cu-sulphides in different proportions which generally have some characteristics in common with the IOCG style. In particular, ore fluid characteristics (magmatic versus non-magmatic) and new geochronological data are used to link the ore-forming processes with the overall crustal evolution to generate a metallogenetic model.Rift bounded shallow marine basins developed at ~ 2.1–2.0 Ga following a long period of extensional tectonics within the Greenstone-dominated, 2.5–2.0 Ga Karelian craton. The ~ 1.9–1.8 Ga Svecofennian Orogen is characterised by subduction and accretion from the southwest. An initial emplacement of calc-alkaline magmas into ~ 1.9 Ga continental arcs led to the formation of the Haparanda Suite and the Porphyrite Group volcanic rocks. Following this early stage of magmatic activity, and separated from it by the earliest deformation and metamorphism, more alkali-rich magmas of the Perthite Monzonite Suite and the Kiirunavaara Group volcanic rocks were formed at ~ 1.88 Ga. Subsequently, partial melting of the middle crust produced large volumes of ~ 1.85 and 1.8 Ga S-type granites in conjunction with subduction related A −/I-type magmatism and associated deformation and metamorphism.In our metallogenetic model the ore formation is considered to relate to the geological evolution as follows. Iron formations and a few stratiform sulphide deposits were deposited in relation to exhalative processes in rift bounded marine basins. The iron formations may be sub-divided into BIF- (banded iron formations) and Mg-rich types, and at several locations these types grade into each other. There is no direct age evidence to constrain the deposition of iron formations, but stable isotope data and stratigraphic correlations suggest a formation within the 2.1–2.0 Ga age range. The major Kiruna-type ores formed from an iron-rich magma (generally with a hydrothermal over-print) and are restricted to areas occupied by volcanic rocks of the Kiirunavaara Group. It is suggested here that 1.89–1.88 Ga tholeiitic magmas underwent magma liquid immiscibility reactions during fractionation and interaction with crustal rocks, including metaevaporites, generating more felsic magmatic rocks and Kiruna-type iron deposits. A second generation of this ore type, with a minor economic importance, appears to have been formed about 100 Ma later. The epigenetic Cu-Au ± Fe oxide mineralisation formed during two stages of the Svecofennian evolution in association with magmatic and metamorphic events and crustal-scale shear zones. During the first stage of mineralisation, from 1.89–1.88 Ga, intrusion-related (porphyry-style) mineralisation and Cu-Au deposits of IOCG affinity formed from magmatic-hydrothermal systems, whereas vein-style and shear zone deposits largely formed at c. 1.78 Ga.The large range of different Fe oxide and Cu-Au ± Fe oxide deposits in Northern Norrbotten is associated with various alteration systems, involving e.g. scapolite, albite, K feldspar, biotite, carbonates, tourmaline and sericite. However, among the apatite iron ores and the epigenetic Cu-Au ± Fe oxide deposits the character of mineralisation, type of ore- and alteration minerals and metal associations are partly controlled by stratigraphic position (i.e. depth of emplacement). Highly saline, NaCl + CaCl2 dominated fluids, commonly also including a CO2-rich population, appear to be a common characteristic feature irrespective of type and age of deposits. Thus, fluids with similar characteristics appear to have been active during quite different stages of the geological evolution. Ore fluids related to epigenetic Cu-Au ± Fe oxides display a trend with decreasing salinity, which probably was caused by mixing with meteoric water. Tentatively, this can be linked to different CuAu ore paragenesis, including an initial (magnetite)-pyrite-chalcopyrite stage, a main chalcopyrite stage, and a late bornite stage.Based on the anion composition and the Br/Cl ratio of ore related fluids bittern brines and metaevaporites (including scapolite) seem to be important sources to the high salinity hydrothermal systems generating most of the deposits in Norrbotten. Depending on local conditions and position in the crust these fluids generated a variety of Cu-Au deposits. These include typical IOCG-deposits (Fe-oxides and Cu-Au are part of the same process), IOCG of iron stone type (pre-existing Fe-oxide deposit with later addition of Cu-Au), IOCG of reduced type (lacking Fe-oxides due to local reducing conditions) and vein-style Cu-Au deposits. From a strict genetic point of view, IOCG deposits that formed from fluids of a mainly magmatic origin should be considered to be a different type than those deposits associated with mainly non-magmatic fluids. The former tend to overlap with porphyry systems, whereas those of a mainly non-magmatic origin overlap with sediment hosted Cu-deposits with respect to their origin and character of the ore fluids.  相似文献   

14.
The east-central part of Jilin Province, located on the eastern continental margin of northeast China along the eastern Xing–Meng orogenic belt, hosts more than 10 large- and medium-scale Mo deposits. The major types of mineralization include porphyry, skarn, and quartz vein. To better understand the formation and distribution of porphyry Mo deposits in this area, we investigated the geological characteristics of the deposits and applied molybdenite Re–Os isotope dating to constrain the age and source of mineralization. The results, combined with existing data, show that: (a) the Daheishan Mo deposit yields an isochron age of 168.7 ± 3.1 Ma; (b) the Shuangshan Mo deposit yields an isochron age of 171.6 ± 1.6 Ma; (c) the Liushengdian Mo deposit yields a weighted mean model age of 168.7 ± 1.4 Ma; (d) the Jiapigou Mo deposit yields a weighted mean model age of 196 ± 4 Ma; and (e) the Sancha Mo deposit yields a weighted mean model age of 183.1 ± 1.8 Ma. Therefore, the Mo mineralization occurred in the Early–Middle Jurassic (196–167 Ma), during the late stages of magmatism or during the late evolution of magma chambers. The geodynamic setting at this time was dominated by subduction of the paleo-Pacific Plate beneath the Eurasian continent. The rhenium content of molybdenite varies from 0.2 to 99.7 ppm, suggesting that the ore-forming materials may come from a crustal source or a mixed crustal and mantle source.  相似文献   

15.
Selenium (Se) is an important co-existing elemental component of the mineral matrix of mercury (Hg) ore deposits. The hazards associated with Se contamination of the aquatic ecosystems in Hg mining areas; however, are often overlooked by environmental researchers due to a preoccupation with Hg. Selenium may also pose a long-term risk to the local ecosystem, and further complicate the situation as Se may also play an important antagonistic role against Hg. Furthermore, most studies on Se pollution have focused only on total Se, whereas the toxicity, bioavailability, and bioaccumulation of Se in aquatic ecosystems is primarily determined by its site-specific individual species. In this study, the concentrations of total Se, inorganic Se (tetravalent and hexavalent), and organic Se were determined in water samples collected from 41 typical sites selected in rivers, tributaries, and springs in Wanshan, China, where Hg and Se co-occur due to historic Hg mining and retorting activities. Se concentrations were observed to decrease with distance from mine-waste calcines, which indicated that mine-waste calcines may be significant sources of the elevated Se in the rivers, especially in downstream areas within 8 km from the mine-waste calcines. The concentration of total aqueous Se throughout the study area was highly variable (3.8 ± 6.0 μg L−1) and on average was one order of magnitude greater than that in natural river systems worldwide (0.1–0.3 μg L−1). The majority of the Se was hexavalent (3.1 ± 4.9 μg L−1; 65%), followed by tetravalent (0.53 ± 0.86 μg L−1; 15%) and organic forms (0.85 ± 1.5 μg L−1; 20%), possibly due to the generally alkaline conditions. Se concentrations in some sampling sites exceeded certain recommended limit of values. However, the existing criteria for Se in aquatic system are mainly based on total Se and the recommended limit of values in different countries or organizations are inconsistent with one another. Therefore, the need to consider Se speciation rather than only total Se is highlighted for future studies.  相似文献   

16.
The Tasiast gold deposits are hosted within Mesoarchean rocks of the Aouéouat greenstone belt, Mauritania. The Tasiast Mine consists of two deposits hosted within distinctly different rock types, both situated within the hanging wall of the west-vergent Tasiast thrust. The Piment deposits are hosted within metasedimentary rocks including metaturbidites and banded iron formation where the main mineral association consists of magnetite-quartz-pyrrhotite ± actinolite ± garnet ± biotite. Gold is associated with silica flooding and sulphide replacement of magnetite in the turbidites and in the banded iron formation units. The West Branch deposit is hosted within meta-igneous rocks, mainly diorites and quartz diorites that lie stratigraphically below host rocks of the Piment deposits. Most of the gold mineralisation at West Branch is hosted by quartz–carbonate veins within the sheared and hydrothermally altered meta-diorites that constitute the Greenschist Zone. At Tasiast, gold mineralisation has been defined over a strike length > 10 km and to vertical depths of 740 m. All of the significant mineralised bodies defined to date dip moderately to steeply (45° to 70°) to the east and have a south–southeasterly plunge. Gold deposits on the Tasiast trend are associated with second order shear zones that are splays cutting the hanging wall block of the Tasiast thrust. An age of 2839 ± 36 Ma obtained from the hydrothermal overgrowth on zircons from a quartz vein is interpreted to represent the age of mineralisation.  相似文献   

17.
A recently recognized molybdenum (Mo) metallogenic belt is present within and adjacent to the northern part of the North China Craton (NCC). More than 20 Mo deposits are present in the belt, including the Sadaigoumen and Dacaoping porphyry deposits located in the Fengning region of the northern part of Hebei Province. The Sadaigoumen deposit has a Re–Os molybdenite weighted mean age of 236.5 ± 2.2 Ma (MSWD = 1.4, n = 6), which is more reliable than existing dates and is interpreted as the precise age for formation of the deposit. The Dacaoping Mo deposit is about 100 million years younger, with a Re–Os molybdenite isochron age of 140.1 ± 3.4 Ma (2σ, MSWD = 0.26, n = 5), which is within error of the weighted mean age of 139.4 ± 0.9 Ma. The ages of the two deposits show that there are at least two episodes of Mo porphyry formation in the Fengning region. In combination with the regional geological evolution of this part of the craton margin, we propose that the Triassic Mo event at Sadaigoumen is associated with a collisional event during the closure of the ancient Asian Ocean, whereas the Early Cretaceous Mo event at Dacaoping is associated with lithospheric thinning of the NCC.  相似文献   

18.
Establishing firm radiocarbon chronologies for Quaternary permafrost sequences remains a challenge because of the persistence of old carbon in younger deposits. To investigate carbon dynamics and establish ice wedge formation ages in Interior Alaska, we dated a late Pleistocene ice wedge, formerly assigned to Marine Isotope Stage (MIS) 3, and host sediments near Fairbanks, Alaska, with 24 radiocarbon analyses on wood, particulate organic carbon (POC), air-bubble CO2, and dissolved organic carbon (DOC). Our new CO2 and DOC ages are up to 11,170 yr younger than ice wedge POC ages, indicating that POC is detrital in origin. We conclude an ice wedge formation age between 28 and 22 cal ka BP during cold stadial conditions of MIS 2 and solar insolation minimum, possibly associated with Heinrich event 2 or the last glacial maximum. A DOC age for an ice lens in a thaw unconformity above the ice wedge returned a maximum age of 21,470 ± 200 cal yr BP. Our variable 14C data indicate recycling of older carbon in ancient permafrost terrain, resulting in radiocarbon ages significantly older than the period of ice-wedge activity. Release of ancient carbon with climatic warming will therefore affect the global 14C budget.  相似文献   

19.
Marine Isotope Stage (MIS) 11 palaeoclimate has so far been documented in marine and ice sheet isotopic records. However, excepting some lacustrine pollen records, very little is known about palaeoclimatic conditions in continental areas. This study uses geochemical records in calcareous tufa deposits from rivers as a basis for reconstructing temperate palaeoclimatic conditions. Tufa deposits are now proven to record high‐quality palaeoclimatic information in recent to Holocene deposits. Work on older interglacial tufas is just starting and in this paper we present the first comprehensive results from a MIS 11 tufa. The tufa comes from the Seine Valley (La Celle, northern France). Geochemical data in the tufa calcite are interpreted to record primarily air temperature (δ18O) and humidity (δ13C and Mg/Ca and Sr/Ca). The combined data identify a warm and wet climatic optimum followed by two temperature decreases associated with oscillations in humidity. These marked climatic variations recorded through the La Celle profile are strongly coherent with the palaeoenvironmental reconstructions from malacological data. The abrupt climatic and environmental events recorded could be related to short‐term degradation of vegetation cover in Europe, which is itself controlled by global palaeoclimatic events. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

20.
The large Yueyang Ag-Au-Cu deposit is commonly regarded as a low-sulfidation epithermal deposit in the Zijinshan orefield, Fujian Province, southeastern China. The Ag-Ag-Cu orebodies hosted in the Zijinshan granitic batholith are mainly stratoid and lens in shape, and controlled by a series of NW-trending listric faults with shallow dip angles. Four mineralization stages are recognized on the basis of mineral assemblage, ore fabrics, and crosscutting relationships of the ore veins, namely: pre-ore (pyrite + sericite + quartz ± chlorite), main Cu (chalcopyrite + pyrite + sericite + quartz ± bornite), main Ag-Au (Ag and Au minerals + pyrite + quartz + adularia ± calcite ± apatite ± chalcopyrite ± galena ± sphalerite) and post-ore (quartz ± chalcedony ± calcite) stages. Fluid inclusions (FIs) in the deposit include aqueous liquid-rich (WL-), aqueous vapor-rich (WV-), and minor carbonic (C-) and daughter mineral-bearing (S-) type ones. WL-subtype is the main inclusion type in the Yueyang deposit, accounting for more than 90% in proportion in each stage. Minor WV-subtype inclusions occur in both the main Cu and Ag stages, while the C-type and S-type ones are only observed in the main Cu stage. Fluid inclusion and H-O isotope study indicated that the ore-forming fluid of the main Cu stage is primarily magmatic vapor, which further underwent fluid boiling and mixing with meteoric water, while the ore-forming fluid of the main Ag stage is meteoric water-dominated, and the precipitation of silver and gold was mainly resulted from fluid boiling and the precipitation of other sulfides. On the basis of the aforementioned geological, fluid inclusion and stable isotope studies, we proposed a two-stage model for the Yueyang deposit, including a magmatic vapor-related porphyry type Cu mineralization and meteoric water-related low-sulfidation epithermal Ag-Au-Cu mineralization, although the porphyry Cu mineralization is very limited in scale. The mineralization and exhumation depths of the Yueyang deposit are estimated to be 448‒527 m and 18‒97 m, respectively. By comparison with the exhumation depths of other deposits in the Zijinshan orefield, it is suggested that more epithermal deposits could be found in the southwest of the orefield due to less uplift and exhumation therein.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号