共查询到20条相似文献，搜索用时 46 毫秒
1.
Reconstruction of the near‐offset gap in marine seismic data using seismic interferometric interpolation 
下载免费PDF全文
下载免费PDF全文 In conventional seismic exploration, especially in marine seismic exploration, shot gathers with missing near‐offset traces are common. Interferometric interpolation methods are one of a range of different methods that have been developed to solve this problem. Interferometric interpolation methods differ from conventional interpolation methods as they utilise information from multiples in the interpolation process. In this study, we apply both conventional interferometric interpolation (shot domain) and multi‐domain interferometric interpolation (shot and receiver domain) to a synthetic and a real‐towed marine dataset from the Baltic Sea with the primary aim of improving the image of the seabed by extrapolation of a near‐offset gap. We utilise a matching filter after interferometric interpolation to partially mitigate artefacts and coherent noise associated with the far‐field approximation and a limited recording aperture size. The results show that an improved image of the seabed is obtained after performing interferometric interpolation. In most cases, the results from multi‐domain interferometric interpolation are similar to those from conventional interferometric interpolation. However, when the source–receiver aperture is limited, the multi‐domain method performs better. A quantitative analysis for assessing the performance of interferometric interpolation shows that multi‐domain interferometric interpolation typically performs better than conventional interferometric interpolation. We also benchmark the interpolated results generated by interferometric interpolation against those obtained using sparse recovery interpolation. 相似文献
2.
Topography and severe variations of near‐surface layers lead to travel‐time perturbations for the events in seismic exploration. Usually, these perturbations could be estimated and eliminated by refraction technology. The virtual refraction method is a relatively new technique for retrieval of refraction information from seismic records contaminated by noise. Based on the virtual refraction, this paper proposes super‐virtual refraction interferometry by cross‐correlation to retrieve refraction wavefields by summing the cross‐correlation of raw refraction wavefields and virtual refraction wavefields over all receivers located outside the retrieved source and receiver pair. This method can enhance refraction signal gradually as the source–receiver offset decreases. For further enhancement of refracted waves, a scheme of hybrid virtual refraction wavefields is applied by stacking of correlation‐type and convolution‐type super‐virtual refractions. Our new method does not need any information about the near‐surface velocity model, which can solve the problem of directly unmeasured virtual refraction energy from the virtual source at the surface, and extend the acquisition aperture to its maximum extent in raw seismic records. It can also reduce random noise influence in raw seismic records effectively and improve refracted waves’ signal‐to‐noise ratio by a factor proportional to the square root of the number of receivers positioned at stationary‐phase points, based on the improvement of virtual refraction's signal‐to‐noise ratio. Using results from synthetic and field data, we show that our new method is effective to retrieve refraction information from raw seismic records and improve the accuracy of first‐arrival picks. 相似文献
3.
We present a parsimonious wave‐equation travel‐time inversion technique for refraction waves. A dense virtual refraction dataset can be generated from just two reciprocal shot gathers for the sources at the endpoints of the survey line, with N geophones evenly deployed along the line. These two reciprocal shots contain approximately 2N refraction travel times, which can be spawned into refraction travel times by an interferometric transformation. Then, these virtual refraction travel times are used with a source wavelet to create N virtual refraction shot gathers, which are the input data for wave‐equation travel‐time inversion. Numerical results show that the parsimonious wave‐equation travel‐time tomogram has about the same accuracy as the tomogram computed by standard wave‐equation travel‐time inversion. The most significant benefit is that a reciprocal survey is far less time consuming than the standard refraction survey where a source is excited at each geophone location. 相似文献
4.
5.
由于地表起伏和近地表结构变化产生的静校正问题严重影响了煤田地震资料的成像质量.为此,首先利用低速带分片拟合的广义线性反演技术进行折射波静校正,解决长波长静校正问题和部分短波长静校正问题,然后,利用叠加能量最大静校正技术进一步解决剩余静校正问题,最后,利用非地表一致性剩余时差校正技术,解决速度和射线等误差引起的非地表一致性剩余时差问题.实验结果表明,在以串连的方式应用了三种校正方法之后,在共炮点道集上,折射渡同相轴的线性形态得到了恢复;在动校正后的共中心点道集上,煤层反射的双曲线同相轴被拉平;在叠加剖面上,煤层反射的信噪比得到了改善. 相似文献
6.
Seismic interferometry is a relatively new technique to estimate the Green's function between receivers. Spurious energy, not part of the true Green's function, is produced because assumptions are commonly violated when applying seismic interferometry to field data. Instead of attempting to suppress all spurious energy, we show how spurious energy associated with refractions contains information about the subsurface in field data collected at the Boise Hydrogeophysical Research Site. By forming a virtual shot record we suppress uncorrelated noise and produce a virtual refraction that intercepts zero offset at zero time. These two features make the virtual refraction easy to pick, providing an estimate of refractor velocity. To obtain the physical parameters of the layer above the refractor we analyse the cross‐correlation of wavefields recorded at two receivers for all sources. A stationary‐phase point associated with the correlation between the reflected wave and refracted wave from the interface identifies the critical offset. By combining information from the virtual shot record, the correlation gather and the real shot record we determine the seismic velocities of the unsaturated and saturated sands, as well as the variable relative depth to the water‐table. Finally, we discuss how this method can be extended to more complex geologic models. 相似文献
7.
We present the theory and numerical results for interferometrically interpolating 2D and 3D marine surface seismic profiles data. For the interpolation of seismic data we use the combination of a recorded Green's function and a model‐based Green's function for a water‐layer model. Synthetic (2D and 3D) and field (2D) results show that the seismic data with sparse receiver intervals can be accurately interpolated to smaller intervals using multiples in the data. An up‐ and downgoing separation of both recorded and model‐based Green's functions can help in minimizing artefacts in a virtual shot gather. If the up‐ and downgoing separation is not possible, noticeable artefacts will be generated in the virtual shot gather. As a partial remedy we iteratively use a non‐stationary 1D multi‐channel matching filter with the interpolated data. Results suggest that a sparse marine seismic survey can yield more information about reflectors if traces are interpolated by interferometry. Comparing our results to those of f‐k interpolation shows that the synthetic example gives comparable results while the field example shows better interpolation quality for the interferometric method. 相似文献
8.
Determination of a shallow velocity–depth model from seismic refraction data by coherence inversion1
Seismic refractions have different applications in seismic prospecting. The travel- times of refracted waves can be observed as first breaks on shot records and used for field static calculation. A new method for constructing a near-surface model from refraction events is described. It does not require event picking on prestack records and is not based on any approximation of arrival times. It consists of the maximization of the semblance coherence measure computed using shot gathers in a time window along refraction traveltimes. Time curves are generated by ray tracing through the model. The initial model for the inversion was constructed by the intercept-time method. Apparent velocities and intercept times were taken from a refraction stacked section. Such a section can be obtained by appling linea moveout corrections to common-shot records. The technique is tested successfully on synthetic and real data. An important application of the proposed method for solving the statics problem is demonstrated. 相似文献
9.
Flavio Poletto Biancamaria Farina Gualtiero Böhm Kees Wapenaar 《Geophysical Prospecting》2015,63(3):567-586
We present a modified interferometry method based on local tangent‐phase analysis, which corrects the cross‐correlated data before summation. The approach makes it possible to synthesize virtual signals usually vanishing in the conventional seismic interferometry summation. For a given pair of receivers and a set of different source positions, a plurality of virtual traces is obtained at new stationary projected points located along the signal wavefronts passing through the real reference receiver. The position of the projected points is estimated by minimizing travel times using wavefront constraint and correlation‐signal tangent information. The method uses mixed processing, which is partially based on velocity‐model knowledge and on data‐based blind interferometry. The approach can be used for selected events, including reflections with different stationary conditions and projected points with respect to those of the direct arrivals, to extend the interferometry representation in seismic exploration data where conventional illumination coverage is not sufficient to obtain the stationary‐phase condition. We discuss possible applications in crosswell geometry with a velocity anomaly and a time lapse. 相似文献
10.
Passive seismic has recently attracted a great deal of attention because non‐artificial source is used in subsurface imaging. The utilization of passive source is low cost compared with artificial‐source exploration. In general, constructing virtual shot gathers by using cross‐correlation is a preliminary step in passive seismic data processing, which provides the basis for applying conventional seismic processing methods. However, the subsurface structure is not uniformly illuminated by passive sources, which leads to that the ray path of passive seismic does not fit the hyperbolic hypothesis. Thereby, travel time is incorrect in the virtual shot gathers. Besides, the cross‐correlation results are contaminated by incoherent noise since the passive sources are always natural. Such noise is kinematically similar to seismic events and challenging to be attenuated, which will inevitably reduce the accuracy in the subsequent process. Although primary estimation for transient‐source seismic data has already been proposed, it is not feasible to noise‐source seismic data due to the incoherent noise. To overcome the above problems, we proposed to combine focal transform and local similarity into a highly integrated operator and then added it into the closed‐loop surface‐related multiple elimination based on the 3D L1‐norm sparse inversion framework. Results proved that the method was capable of reliably estimating noise‐free primaries and correcting travel time at far offsets for a foresaid virtual shot gathers in a simultaneous closed‐loop inversion manner. 相似文献
11.
静校正问题是地震勘探的关键问题,直接影响地震勘探精度和准确性.实际地震采集过程中,当在相同接收点位置上不同时间内插拔布设了不同的检波器时,对于目前基于地表一致性理论假设的基准面静校正和剩余静校正,以及非地表一致性剩余静校正都不具备适用条件.为解决这一问题,本文提出了基于共姿态道集的静校正方法,将相同接收点位置上不同时间布设的检波点所接收的地震数据抽成不同的共姿态道集,在共姿态道集内实施地表一致性静校正;当某接收点位置上具有若干个共姿态道集时,该接收点位置上可能会存在多个检波点静校量;炮点静校问题仍然采用地表一致性静校正方法解决.该方法解决了同一接收点位置上不同共姿态道集之间的非地表一致性静校正问题,同时也解决了全区的检波点和炮点的地表一致性静校正问题,在实际数据应用效果明显. 相似文献
12.
Multi-source seismic technology is an efficient seismic acquisition method that requires a group of blended seismic data to be separated into single-source seismic data for subsequent processing. The separation of blended seismic data is a linear inverse problem. According to the relationship between the shooting number and the simultaneous source number of the acquisition system, this separation of blended seismic data is divided into an easily determined or overdetermined linear inverse problem and an underdetermined linear inverse problem that is difficult to solve. For the latter, this paper presents an optimization method that imposes the sparsity constraint on wavefields to construct the object function of inversion, and the problem is solved by using the iterative thresholding method. For the most extremely underdetermined separation problem with single-shooting and multiple sources, this paper presents a method of pseudo-deblending with random noise filtering. In this method, approximate common shot gathers are received through the pseudo-deblending process, and the random noises that appear when the approximate common shot gathers are sorted into common receiver gathers are eliminated through filtering methods. The separation methods proposed in this paper are applied to three types of numerical simulation data, including pure data without noise, data with random noise, and data with linear regular noise to obtain satisfactory results. The noise suppression effects of these methods are sufficient, particularly with single-shooting blended seismic data, which verifies the effectiveness of the proposed methods. 相似文献
13.
Progress in the imaging of the mantle and core is partially limited by the sparse distribution of natural sources; the earthquake hypocenters are mainly along the active lithospheric plate boundaries. This problem can be approached with seismic interferometry. In recent years, there has been considerable progress in the development of seismic interferometric techniques. The term seismic interferometry refers to the principle of generating new seismic responses by cross‐correlating seismic observations at different receiver locations. The application of interferometric techniques on a global scale could create sources at locations where no earthquakes occur. In this way, yet unknown responses would become available for the application of travel‐time tomography and surface‐wave dispersion studies. The retrieval of a dense‐enough sampling of source gathers would largely benefit the application of reflection imaging. We derive new elastodynamic representation integrals for global‐scale seismic interferometry. The relations are different from other seismic interferometry relations for transient sources, in the sense that they are suited for a rotating closed system like the Earth. We use a correlation of an observed response with a response to which free‐surface multiple elimination has been applied to account for the closed system. Despite the fact that the rotation of the Earth breaks source‐receiver reciprocity, the seismic interferometry relations are shown to be valid. The Coriolis force is included without the need to evaluate an extra term. We synthesize global‐scale earthquake responses and use them to illustrate the acoustic versions of the new interferometric relations. When the sampling of real source locations is dense enough, then both the responses with and without free‐surface multiples are retrieved. When we do not take into account the responses from the sources in the direct neighborhood of the seismic interferometry‐constructed source location, the response with free‐surface multiples can still be retrieved. Even when only responses from sources at a certain range of epicentral distances are available, some events in the Green's function between two receiver locations can still be retrieved. The retrieved responses are not perfect, but the artefacts can largely be ascribed to numerical errors. The reconstruction of internal events – the response as if there was a source and a receiver on (major) contrasts within the model – could possibly be of use for imaging. With modelling it is possible to discover in which region of the correlation panel stationary phases occur that contribute to the retrieval of events. This knowledge opens up a new way of filtering out undesired events and of discovering whether specific events could be retrieved with a given source‐receiver configuration. 相似文献
14.
Kees Wapenaar 《Geophysical Prospecting》2015,63(5):1033-1049
Interferometric redatuming is a data‐driven method to transform seismic responses with sources at one level and receivers at a deeper level into virtual reflection data with both sources and receivers at the deeper level. Although this method has traditionally been applied by cross‐correlation, accurate redatuming through a heterogeneous overburden requires solving a multidimensional deconvolution problem. Input data can be obtained either by direct observation (for instance in a horizontal borehole), by modelling or by a novel iterative scheme that is currently being developed. The output of interferometric redatuming can be used for imaging below the redatuming level, resulting in a so‐called interferometric image. Internal multiples from above the redatuming level are eliminated during this process. In the past, we introduced point‐spread functions for interferometric redatuming by cross‐correlation. These point‐spread functions quantify distortions in the redatumed data, caused by internal multiple reflections in the overburden. In this paper, we define point‐spread functions for interferometric imaging to quantify these distortions in the image domain. These point‐spread functions are similar to conventional resolution functions for seismic migration but they contain additional information on the internal multiples in the overburden and they are partly data‐driven. We show how these point‐spread functions can be visualized to diagnose image defocusing and artefacts. Finally, we illustrate how point‐spread functions can also be defined for interferometric imaging with passive noise sources in the subsurface or with simultaneous‐source acquisition at the surface. 相似文献
15.
Source–receiver two‐way wave extrapolation for prestack exploding‐reflector modelling and migration 下载免费PDF全文
下载免费PDF全文 Most modern seismic imaging methods separate input data into parts (shot gathers). We develop a formulation that is able to incorporate all available data at once while numerically propagating the recorded multidimensional wavefield forward or backward in time. This approach has the potential for generating accurate images free of artiefacts associated with conventional approaches. We derive novel high‐order partial differential equations in the source–receiver time domain. The fourth‐order nature of the extrapolation in time leads to four solutions, two of which correspond to the incoming and outgoing P‐waves and reduce to the zero‐offset exploding‐reflector solutions when the source coincides with the receiver. A challenge for implementing two‐way time extrapolation is an essential singularity for horizontally travelling waves. This singularity can be avoided by limiting the range of wavenumbers treated in a spectral‐based extrapolation. Using spectral methods based on the low‐rank approximation of the propagation symbol, we extrapolate only the desired solutions in an accurate and efficient manner with reduced dispersion artiefacts. Applications to synthetic data demonstrate the accuracy of the new prestack modelling and migration approach. 相似文献
16.
Time‐lapse seismic surveying has become an accepted tool for reservoir monitoring applications, thus placing a high premium on data repeatability. One factor affecting data repeatability is the influence of the rough sea‐surface on the ghost reflection and the resulting seismic wavelets of the sources and receivers. During data analysis, the sea‐surface is normally assumed to be stationary and, indeed, to be flat. The non‐flatness of the sea‐surface introduces amplitude and phase perturbations to the source and receiver responses and these can affect the time‐lapse image. We simulated the influence of rough sea‐surfaces on seismic data acquisition. For a typical seismic line with a 48‐fold stack, a 2‐m significant‐wave‐height sea introduces RMS errors of about 5–10% into the stacked data. This level of error is probably not important for structural imaging but could be significant for time‐lapse surveying when the expected difference anomaly is small. The errors are distributed differently for sources and receivers because of the different ways they are towed. Furthermore, the source wavelet is determined by the sea shape at the moment the shot is fired, whereas the receiver wavelet is time‐varying because the sea moves significantly during the seismic record. 相似文献
17.
In regions where active source seismic exploration is constrained by limitations of energy penetration and recovery, cost and logistical concerns, or regulatory restrictions, analysis of natural source seismic data may provide an alternative. In this study, we investigate the feasibility of using locally‐generated seismic noise in the 2–6 Hz band to obtain a subsurface model via interferometric analysis. We apply this technique to three‐component data recorded during the La Barge Passive Seismic Experiment, a local deployment in south‐western Wyoming that recorded continuous seismic data between November 2008 and June 2009. We find traffic noise from a nearby state road to be the dominant source of surface waves recorded on the array and observe surface wave arrivals associated with this source up to distances of 5 kms. The orientation of the road with respect to the deployment ensures a large number of stationary points, leading to clear observations on both in‐line and cross‐line virtual source‐receiver pairs. This results in a large number of usable interferograms, which in turn enables the application of standard active source processing methods like signal processing, common offset stacking and traveltime inversion. We investigate the dependency of the interferograms on the amount of data, on a range of processing parameters and on the choice of the interferometry algorithm. The obtained interferograms exhibit a high signal‐to‐noise ratio on all three components. Rotation of the horizontal components to the radial/transverse direction facilitates the separation of Rayleigh and Love waves. Though the narrow frequency spectrum of the surface waves prevents the inversion for depth‐dependent shear‐wave velocities, we are able to map the arrival times of the surface waves to laterally varying group and phase velocities for both Rayleigh and Love waves. Our results correlate well with the known geological structure. We outline a scheme for obtaining localized surface wave velocities from local noise sources and show how the processing of passive data benefits from a combination with well‐established exploration seismology methods. We highlight the differences with interferometry applied to crustal scale data and conclude with recommendations for similar deployments. 相似文献
18.
Static shifts from near‐surface inhomogeneities very often represent the key problem in the processing of seismic data from arid regions. In this case study, the deep bottom fill of a wadi strongly degrades the image quality of a 2D seismic data set. The resulting static and dynamic problems are solved by both conventional and common‐reflection‐surface (CRS) processing. A straightforward approach derives conventional refraction statics from picked first breaks and then goes through several iterations of manual velocity picking and residual statics calculation. The surface‐induced static and dynamic inhomogeneities, however, are not completely solved by these conventional methods. In CRS processing, the local adaptation of the CRS stacking parameters results in very detailed dynamic corrections. They resolve the local inhomogeneities that were not detected by manual picking of stacking velocities and largely compensate for the surface‐induced deterioration in the stack. The subsequent CRS residual statics calculations benefit greatly from the large CRS stacking fold which increases the numbers of estimates for single static shifts. This improves the surface‐consistent averaging of static shifts and the convergence of the static solution which removes the remaining static shifts in the 2D seismic data. The large CRS stacking fold also increases the signal‐to‐noise ratio in the final CRS stack. 相似文献
19.
复杂地表的单程波动方程地震叠前正演 总被引：4，自引：0，他引：4
作者基于数学检波器和等时叠加原理,实现了复杂地表的单程波动方程地震叠前正演模拟。该方法采用虚拟的数学检波器接收地下的反射地震信号,灵活地将接收点布置在地表的任何地方,从而满足地表起伏的要求。此外,根据等时叠加原理, 该方法采用单程波动方程进行波场延拓和成像,计算简单快速。通过复杂正断层的数值模拟,得到了高信噪比的共炮集地震记录,并采用适用于起伏地形的深度偏移方法对该共炮集地震记录进行了叠前深度偏移,较好地实现了地震波的偏移归位,从而证明了这里提出的起伏地表的单程波动方程地震叠前正演方法是正确和有效的。 相似文献
20.
估算剩余静校正量可看作是以激发点及接收点剩余静校正量为模型参数的、以叠加能量为目标函数的全局最优值的搜索问题．当地震记录的剩余静校正量大而信噪比较低时，应用相关统计法不能有效地拾取静校正量．本文分别采用了ＣＭＰ道集内道间互相关法、图像边缘提取的Ｌａｐｌａｃｉａｎ算法及ＤＦＰ算法，三种不同算法联合迭代反演可求取最佳的模型参数，使目标函数值达到或接近于全局最优．理论试算及实际资料处理效果表明，这种方法能够解决低信噪比及大静校正量造成的周期跳跃等静校正问题． 相似文献