首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 281 毫秒
1.
Time‐lapse 3D seismic reflection data, covering the CO2 storage operation at the Snøhvit gas field in the Barents Sea, show clear amplitude and time‐delay differences following injection. The nature and extent of these changes suggest that increased pore fluid pressure contributes to the observed seismic response, in addition to a saturation effect. Spectral decomposition using the smoothed pseudo‐Wigner–Ville distribution has been used to derive discrete‐frequency reflection amplitudes from around the base of the CO2 storage reservoir. These are utilized to determine the lateral variation in peak tuning frequency across the seismic anomaly as this provides a direct proxy for the thickness of the causative feature. Under the assumption that the lateral and vertical extents of the respective saturation and pressure changes following CO2 injection will be significantly different, discrete spectral amplitudes are used to distinguish between the two effects. A clear spatial separation is observed in the distribution of low‐ and high‐frequency tuning. This is used to discriminate between direct fluid substitution of CO2, as a thin layer, and pressure changes that are distributed across a greater thickness of the storage reservoir. The results reveal a striking correlation with findings derived from pressure and saturation discrimination algorithms based on amplitude versus offset analysis.  相似文献   

2.
Shallow gas accumulations and gas seepage may indicate deeper hydrocarbon reservoirs. Sonar and high resolution seismic recordings were carried out to obtain gas migration and accumulation below seabed in Northeast Persian Gulf. Results revealed some structures and reflectivity effects, for example few pockmarks, gas seepage, and other surface structures in sonar and seismic data. Most of the features observed on seismic data were located at depths between 5 and 10 m (sub-sea bed) that include acoustic blanking and turbidity, gas packets, gas chimneys, and enhanced reflection. Most of the gas is accumulated on young and thin parallel layers, but the presence of acoustic effect in Aghajari Formation indicates that the origin of the gas accumulation in shallow strata may be located in a deeper reservoir.  相似文献   

3.
We present the results of twenty heat flow stations in the Gulf of Oman which are used to infer the first reliable age estimates for the basin. A mean surface heat flux of 42.6±3.6 mW m?2 exhibits no significant regional variation. After correction for thick and rapidly deposited sediments this yields an age of 70 to 100 Ma according to oceanic thermal models. This age is also consistent with the sediment corrected basement depths of 5.5–6.0 km and with formation during the Cretaceous quiet zone. The latter can explain the absence of magnetic sea-floor spreading lineations. Heat flow measurements are also used to confirm the presence of gas hyrdate layers. The measured thermal gradient yields a depth for the solid to free gas phase transition which is the same as that deduced from “bright spots” seen on seismic reflection profiles.  相似文献   

4.
It has been postulated that the sediments of the Gulf of Oman, in the northwest Indian Ocean contain a number of localised accumulations of free gas which are apparent on continuous seismic reflection profiles as horizons with anomalously high amplitude reflections. We suggest that the gas is trapped beneath a relatively impermeable gas hydrate layer which is stable within the uppermost 350–700 m of sediment. The depth beneath the sea floor of all the observed highly reflective horizons varies with water depth in a manner similar to that predicted from theoretical estimates of the depth at which the phase change occurs from gas hydrate to free gas. Further evidence that the gas is trapped by a hydrate layer is provided by the detailed shape of gas layers within the cores of gentle anticlines. The curvature of the gas reflector mirrors that of the sea floor above it, but transgresses the local bedding, suggesting that the gas is trapped by a hydrate phase change governed by the pressure and temperature conditions rather than by a stratigraphic trap.  相似文献   

5.
天然气在开发过程中,储层有效压力和含气饱和度均会发生变化,研究有效压力和含气饱和度的变化对地震响应特征的影响,在基于时移地震的剩余气分布预测研究中具有重要意义。天然气和石油的声学性质有着明显的差异,油藏时移地震的研究成果不能直接应用于气藏,因此需要开展气藏的时移地震研究。利用Shapiro模型表征干岩石弹性模量随有效压力的变化,借助Batzle-Wang方程描述流体速度随压力的变化关系,联合Gassmann理论进行流体替代,表征饱和流体岩石速度随含气饱和度的变化,建立了饱和流体岩石速度随有效压力和饱和度变化的岩石物理模型。基于该模型,对不同含气饱和度和不同有效压力下的气藏储层模型进行了多波时移地震叠前振幅变化(AVO)模拟。结果表明多波时移地震AVO技术可以有效地区分有效压力变化和含气饱和度变化,为进一步开展气藏多波时移地震流体监测提供了理论参考依据。   相似文献   

6.
含流体砂岩地震波频散实验研究   总被引:1,自引:0,他引:1       下载免费PDF全文
为了研究孔隙流体对不同渗透率岩石地震波速度的影响,在实验室利用跨频带岩石弹性参数测试系统得到了应变幅值10-6的2~2000Hz频段下的地震波速度和1 MHz频率下的超声波速度,利用差分共振声谱法得到了频率600Hz岩石干燥和完全饱水情况下岩石声学参数.实验表明,在低饱和度下,致密砂岩在地震和超声频段下没有明显的频散;在高饱和度下纵波速度的频散变得明显.从干燥到完全水饱和条件,不同频率测量的致密砂岩的体积模量随岩石孔隙度增高而降低,且体积模量的变化量受岩石微观孔隙结构的影响较大.高孔、高渗砂岩无论在低含水度下还是在高含水饱和度下频散微弱,并且在地震频段下围压对于岩石纵横波速度的影响要大于频率的影响.高孔、高渗砂岩和致密砂岩不同含水饱和度下的频散差异可应用于储层预测,油气检测等方面,同时该研究可以更好地帮助理解岩石的黏弹性行为,促进岩石物理频散理论的发展,提高地震解释的精度.  相似文献   

7.
Numerous examples of reservoir fields from continental and marine environments involve thin‐bedded geology, yet, the inter‐relationship between thin‐bedded geology, fluid flow and seismic wave propagation is poorly understood. In this paper, we explore the 4D seismic signature due to saturation changes of gas within thin layers, and address the challenge of identifying the relevant scales and properties, which correctly define the geology, fluid flow and seismic wave propagation in the field. Based on the study of an outcrop analogue for a thin‐bedded turbidite, we model the time‐lapse seismic response to fluid saturation changes for different levels of model scale, and explore discrepancies in quantitative seismic attributes caused by upscaling. Our model reflects the geological complexity associated with thin‐bedded turbidites, and its coupling to fluid flow, which in turn affects the gas saturation distribution in space, and its time‐lapse seismic imprint. Rock matrix and fluid properties are modelled after selected fields to reproduce representative field models with realistic impedance contrasts. In addition, seismic modelling includes multiples, in order to assess their contribution in seismic propagation through thin gas layers. Our results show that multiples could contribute significantly to the measured amplitudes in the case of thin‐bedded geology. This suggests that forward/inverse modelling involving the flow simulation and seismic domains used in time‐lapse seismic interpretation should account for thin layers, when these are present in the geological setting.  相似文献   

8.
The presence of natural gas in the pore space of reservoir rocks results in a significant decrease in P-wave velocity. Even low gas saturation can generate seismic anomalies (DHI) and false image of gas accumulation of economic importance. This article presents an attempt to evaluate gas saturation from 2D seismic section in the Miocene sandstone strata in the south-eastern part of the Carpathian Foredeep. The ESTYMACJA program and the Biot-Gassmann model were used to study the dependence between elastic parameters and saturating fluids (water and gas) recorded in wells. Series of calculations was carried out using a method of fluid substitution for various gas saturation. The applicability of seismic data for evaluating gas saturation of reservoir beds was assessed with the use of 1D modelling (synthetic seismograms) and 2D modelling (theoretical seismic section) calculated for different gas saturation. The proposed methodology can be used to identify low and high gas-saturated zones and contour the reservoir.  相似文献   

9.
基于双相介质理论的储层参数反演方法   总被引:2,自引:2,他引:0       下载免费PDF全文
传统基于单相介质理论的储层参数反演方法将孔隙流体与固体骨架等效为单一固体,弱化了孔隙流体的影响,反演结果精度不高.本文提出根据双相介质理论反演储层参数的方法.首先,在前人研究的基础上,利用岩石物理模型建立弹性参数与孔隙度、饱和度、泥质含量等储层参数间的关系,进而将双相介质反射系数推导为储层参数的函数;其次,根据贝叶斯反演理论,在高斯噪声假设的基础上,采用更加符合实际情况的修正柯西分布函数描述反射系数的稀疏性,推导出储层物性参数目标反演函数;最后,应用差分进化非线性全局寻优算法来求解目标反演函数,使得反演结果与实际资料间误差最小.新方法旨在突出流体对介质反射系数的影响,以期得到较高的储层参数反演精度.模型与实际资料测试均表明该方法可行、有效且反演精度较高.  相似文献   

10.
Various models have been proposed to link partial gas saturation to seismic attenuation and dispersion, suggesting that the reflection coefficient should be frequency‐dependent in many cases of practical importance. Previous approaches to studying this phenomenon typically have been limited to single‐interface models. Here, we propose a modelling technique that allows us to incorporate frequency‐dependent reflectivity into convolutional modelling. With this modelling framework, seismic data can be synthesised from well logs of velocity, density, porosity, and water saturation. This forward modelling could act as a basis for inversion schemes aimed at recovering gas saturation variations with depth. We present a Bayesian inversion scheme for a simple thin‐layer case and a particular rock physics model and show that, although the method is very sensitive to prior information and constraints, both gas saturation and layer thickness theoretically can be estimated in the case of interfering reflections.  相似文献   

11.
Seismic monitoring of sequestered carbon dioxide (CO2) in underground deposits is a matter of growing importance. The subsurface monitoring of this greenhouse gas is possible due to the marked contrast between the physical properties of natural reservoir fluids and those of carbon dioxide after the injection. This technique makes necessary the investigation of appropriate seismic indicators to link seismic attributes to petrophysical properties, composition and state of the rock as well as pore-fluid type and in-situ physical conditions. With this motivation in mind, we use a Biot–Gassmann formulation to model the theoretical P-wave amplitude reflection coefficients vs. angle of incidence in the seismic range when a planar P-wave strikes the interface between a caprock and a porous sandstone which has its pore space saturated by a mixture of CO2 with brine or oil at different states (supercritical, liquid and gas). The effects of dissolution of CO2 in oil and the existence of a saturation threshold, above which a free CO2 phase develops, are included in the computations. Attention is particularly focused on the sensitivity of the classic best-fit amplitude variations with angle coefficients, to different degrees of CO2 saturation. We conclude from this analysis that the changes in seismic AVA attributes between 30 and 40 degrees can be useful to infer bounds on the CO2 saturation degree, to detect the presence of immiscible CO2 phase and, in some cases, to infer the physical state of the accumulations.  相似文献   

12.
The composition and spatial distribution of various petroleum hydrocarbons (PHs), comprising both aliphatic and polycyclic aromatic hydrocarbons (PAHs), and selected chlorinated pesticides and PCBs were measured in biota and coastal sediments from seven countries in the Persian Gulf and the Gulf of Oman (Bahrain, Iran, Kuwait, Oman, Qatar, Saudi Arabia and the United Arab Emirates). Evidence of extensive marine contamination with respect to organochlorinated compounds and PHs was not observed. Only one site, namely the BAPCO oil refinery in Bahrain, was considered to be chronically contaminated. Comparison of the results from this survey for Σ DDTs and Σ PCBs in rock oysters from the Gulf of Oman with similar measurements made at the same locations over the past two decades indicates a temporal trend of overall decreasing Σ PCB concentrations in oysters, whereas Σ DDTs levels have little changed during that period.  相似文献   

13.
Seismic reflection along the path of the Mediterranean Undercurrent   总被引:2,自引:0,他引:2  
Seismic reflection profiling is applied to the study of large scale physical oceanographic processes in the Gulf of Cádiz and western Iberian coast, coinciding with the path of the Mediterranean Undercurrent. The multi-channel seismic reflection method provides clear images of thermohaline fine structure with a horizontal resolution approximately two orders of magnitude higher than CTD casting. The seismic data are compared with co-located historical oceanographic data. Three seismic reflectivity zones are identified: North Atlantic Central Water, Mediterranean Water and North Atlantic Deep Water. Seismic evidence for the path of the Mediterranean Undercurrent is found in the near-slope reflectivity patterns, with rising reflectors between about 500 and 1500 m. However, the core of the undercurrent is largely transparent. Seismic images show that central and, particularly, intermediate Mediterranean Waters have fine structure coherent over horizontal distances of several tens of kilometers. However, the intensity of the reflectors, and their horizontal coherence, decreases downstream. This change in seismic reflectivity is probably the result of diminished vertical thermohaline contrasts between adjacent water masses, so that double-diffusion processes become unable to sustain temperature and salinity staircases. Comparison of root-mean-square seismic amplitudes with temperature and salinity differences between the Mediterranean Undercurrent and the overlying central waters suggests a causal relationship between observed thermohaline fine structure and true seismic amplitudes. We estimate that, within this intermediate water stratum, impedance contrasts are mainly controlled by sound speed contrasts (a factor between 3.5 and 10 times larger than density contrasts), which are mainly controlled by temperature contrasts (a factor between 1.5 and 5 times larger than salinity contrasts).  相似文献   

14.
Seismic amplitudes contain important information that can be related to fluid saturation. The amplitude‐versus‐offset analysis of seismic data based on Gassmann's theory and the approximation of the Zoeppritz equations has played a central role in reservoir characterization. However, this standard technique faces a long‐standing problem: its inability to distinguish between partial gas and “fizz‐water” with little gas saturation. In this paper, we studied seismic dispersion and attenuation in partially saturated poroelastic media by using frequency‐dependent rock physics model, through which the frequency‐dependent amplitude‐versus‐offset response is calculated as a function of porosity and water saturation. We propose a cross‐plotting of two attributes derived from the frequency‐dependent amplitude‐versus‐offset response to differentiate partial gas saturation and “fizz‐water” saturation. One of the attributes is a measure of “low frequency”, or Gassmann, of reflectivity, whereas the other is a measure of the “frequency dependence” of reflectivity. This is in contrast to standard amplitude‐versus‐offset attributes, where there is typically no such separation. A pragmatic frequency‐dependent amplitude‐versus‐offset inversion for rock and fluid properties is also established based on Bayesian theorem. A synthetic study is performed to explore the potential of the method to estimate gas saturation and porosity variations. An advantage of our work is that the method is in principle predictive, opening the way to further testing and calibration with field data. We believe that such work should guide and augment more theoretical studies of frequency‐dependent amplitude‐versus‐offset analysis.  相似文献   

15.
Investigating seismic dispersion and attenuation characteristics of loosely compacted marine sandstone is essential in reconciling different geophysical measurements (surface seismic, well logging and ultrasonic) for better characterization of a shallow marine sandstone reservoir. We have experimented with a typical high-porosity and high-permeability sandstone sample, extracted from the Paleogene marine depositional setting in the Gulf of Mexico, at the low-frequency band (2–500 Hz) as well as ultrasonic point (106 Hz), to investigate the effects of varying saturation levels on a rock's elasticity. The results suggest that the Young's modulus of the measured sample with adsorbed moisture at laboratory conditions (room temperature, 60%–90% humidity) exhibits dispersive behaviours. The extensional attenuation can be as high as 0.038, and the peak frequency occurs around 60 Hz. The extensional attenuation due to moisture adsorption can be dramatically mitigated with the increase of confining pressure. For partial saturation status, extensional attenuation increases as increasing water saturation by 79% with respect to the measured frequencies. Additionally, the results show that extensional attenuation at the fully water-saturated situation is even smaller than that at adsorbed moisture conditions. The Gassmann–Wood model can overall capture the P-wave velocity-saturation trend of measured data at seismic frequencies, demonstrating that the partially saturated unconsolidated sandstone at the measured seismic frequency range is prone to be in the relaxed status. Nevertheless, the ultrasonic velocities are significantly higher than the Gassmann–Wood predictions, suggesting that the rocks are in the unrelaxed status at the ultrasonic frequency range. The poroelastic modelling results based on the patchy saturation model also indicate that the characteristic frequency of the partially saturated sample is likely beyond the measured seismic frequency range.  相似文献   

16.
The Eagle Ford Shale of Central and South Texas is currently of great interest for oil and gas exploration and production. Laboratory studies show that the Eagle Ford Shale is anisotropic, with a correlation between anisotropy and total organic carbon. Organic materials are usually more compliant than other minerals present in organic‐rich shales, and their shapes and distribution are usually anisotropic. This makes organic materials an important source of anisotropy in organic‐rich shales. Neglecting shale anisotropy may lead to incorrect estimates of rock and fluid properties derived from inversion of amplitude versus offset seismic data. Organic materials have a significant effect on the PP and PS reflection amplitudes from the Austin Chalk/Upper Eagle Ford interface, the Upper Eagle Ford/Lower Eagle Ford interface, and the Lower Eagle Ford/Buda Limestone interface. The higher kerogen content of the Lower Eagle Ford compared with that of the Upper Eagle Ford leads to a negative PP reflection amplitude that dims with offset, whereas the PS reflection coefficient increases in magnitude with increasing offset. The PP and PS reflection coefficients at the Austin Chalk/Upper Eagle Ford interface, the Upper Eagle Ford/Lower Eagle Ford interface, and the Lower Eagle Ford/Buda Limestone interface all increase in magnitude with increasing volume fraction of kerogen.  相似文献   

17.
The aim of seismic reservoir monitoring is to map the spatial and temporal distributions and contact interfaces of various hydrocarbon fluids and water within a reservoir rock. During the production of hydrocarbons, the fluids produced are generally displaced by an injection fluid. We discuss possible seismic effects which may occur when the pore volume contains two or more fluids. In particular, we investigate the effect of immiscible pore fluids, i.e. when the pore fluids occupy different parts of the pore volume. The modelling of seismic velocities is performed using a differential effective‐medium theory in which the various pore fluids are allowed to occupy the pore space in different ways. The P‐wave velocity is seen to depend strongly on the bulk modulus of the pore fluids in the most compliant (low aspect ratio) pores. Various scenarios of the microscopic fluid distribution across a gas–oil contact (GOC) zone have been designed, and the corresponding seismic properties modelled. Such GOC transition zones generally give diffuse reflection regions instead of the typical distinct GOC interface. Hence, such transition zones generally should be modelled by finite‐difference or finite‐element techniques. We have combined rock physics modelling and seismic modelling to simulate the seismic responses of some gas–oil zones, applying various fluid‐distribution models. The seismic responses may vary both in the reflection time, amplitude and phase characteristics. Our results indicate that when performing a reservoir monitoring experiment, erroneous conclusions about a GOC movement may be drawn if the microscopic fluid‐distribution effects are neglected.  相似文献   

18.
The injection of CO2 at the Ketzin pilot site commenced in June 2008 and was terminated in August 2013 after 67 kT had been injected into a saline formation at a depth of 630–650 m. As part of the site monitoring program, four 3D surface seismic surveys have been acquired to date, one baseline and three repeats, of which two were conducted during the injection period, and one during the post‐injection phase. The surveys have provided the most comprehensive images of the spreading CO2 plume within the reservoir layer. Both petrophysical experiments on core samples from the Ketzin reservoir and spectral decomposition of the 3D time‐lapse seismic data show that the reservoir pore pressure change due to CO2 injection has a rather minor impact on the seismic amplitudes. Therefore, the observed amplitude anomaly is interpreted to be mainly due to CO2 saturation. In this study, amplitude versus offset analysis has been applied to investigate the amplitude versus offset response from the top of the sandstone reservoir during the injection and post‐injection phases, and utilize it to obtain a more quantitative assessment of the CO2 gaseous saturation changes. Based on the amplitude versus offset modelling, a prominent decrease in the intercept values imaged at the top of the reservoir around the injection well is indeed associated solely with the CO2 saturation increase. Any change in the gradient values, which would, in case it was positive, be the only signature induced by the reservoir pressure variations, has not been observed. The amplitude versus offset intercept change is, therefore, entirely ascribed to CO2 saturation and used for its quantitative assessment. The estimated CO2 saturation values around the injection area in the range of 40%–60% are similar to those obtained earlier from pulsed neutron‐gamma logging. The highest values of 80% are found in the second seismic repeat in close vicinity to the injection and observation wells.  相似文献   

19.
Combining time–amplitude and time–frequency information from seismic reflection data sets of different resolutions allows the analysis of anomalous reflections from very-shallow to great subsurface depths. Thus, it can enhance the imaging of subsurface features which have a frequency-dependent reflectivity such as gas. Analysing seismic data of different resolution in the time–amplitude and time–frequency domains is a powerful method to determine hydrocarbon migration pathways from deep reservoirs to the seafloor. This interpretation method has been applied to the formerly-glaciated offshore Queen Charlotte Basin hosting several seafloor pockmarks and mounds associated with the leakage of underlying hydrocarbon reservoirs. Low-frequency shadows observed in the time–frequency domain provide evidence of different resolutions that several anomalous reflection amplitudes may be attributed to the occurrence of gas. The seismic imagery shows that gas uses a fault to migrate from deep reservoirs included in Upper Mesozoic strata towards secondary reservoirs located along the fault plane into Neogene layers. Once gas reaches a porous cut-and-fill succession, migration changes from structurally- to stratigraphically-controlled before gas leaks through unconsolidated Quaternary sediments forming the shallow subsurface to eventually seep at the seafloor where pockmarks and carbonate mounds are formed.  相似文献   

20.
Time-lapse seismic data are generally used to monitor the changes in dynamic reservoir properties such as fluid saturation and pore or effective pressure. Changes in saturation and pressure due to hydrocarbon production usually cause changes in the seismic velocities and as a consequence changes in seismic amplitudes and travel times. This work proposes a new rock physics model to describe the relation between saturation-pressure changes and seismic changes and a probabilistic workflow to quantify the changes in saturation and pressure from time-lapse seismic changes. In the first part of this work, we propose a new quadratic approximation of the rock physics model. The novelty of the proposed formulation is that the coefficients of the model parameters (i.e. the saturation-pressure changes) are functions of the porosity, initial saturation and initial pressure. The improvements in the results of the forward model are shown through some illustrative examples. In the second part of the work, we present a Bayesian inversion approach for saturation-pressure 4D inversion in which we adopt the new formulation of the rock physics approximation. The inversion results are validated using synthetic pseudo-logs and a 3D reservoir model for CO2 sequestration.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号