共查询到17条相似文献,搜索用时 343 毫秒
1.
现阶段导航接收机设计的基本架构是FPGA+DSP或者FPGA+ ARM 的工作方式。接收机存在研发时间长,研发难度较大的特点,且DSP/ARM 处理环路跟踪的同时需处理协议上的许多操作,在实现上较为复杂,实时性不高。基于SOC技术,利用Xilinx公司提供的协处理器软核代替DSP部分功能,用于在单片FPGA内实现导航接收机的跟踪环路,并根据实际情况,设计了硬件加速器和相关值预处理模块,利用时分复用的方式节约了硬件资源,在单片FPGA上实现了跟踪环路的设计,降低了硬件成本,为高性能导航接收机芯片设计提供了一种思路。 相似文献
2.
为了满足高动态用户及强干扰条件下的应用需求,提出了一种基于卫星信号矢量跟踪的SINS/GPS深组合导航方法,设计了基于FPGA硬件平台的实施方案。利用组合卡尔曼滤波器反馈回路取代了传统接收机中独立、并行的跟踪环路,能够同时完成所有可视卫星信号的跟踪和导航信息处理;通过矢量跟踪算法对所有可视卫星信号进行集中处理,能够增强跟踪通道对信号载噪比变化的适应能力,从而提高接收机在强干扰或信号中断条件下的跟踪性能;根据SINS导航参数和星历信息推测GPS伪码相位和多普勒频移等参数,用以辅助卫星信号的捕获和跟踪,能够大大缩短接收机的搜索捕获时间,并增强接收机在高动态条件下的跟踪性能。基于矢量跟踪的深组合方法不仅在GPS信号短暂中断期间,能够保证系统的导航精度和可靠性,而且在强干扰环境中能够维持较好的伪码相位和载波频率跟踪性能。 相似文献
3.
传统的基于硬件的接收机由于芯片的封装性很难用来进行通道信号的分析研究,而基于软件无线电技术的软件接收机则很容易做到.软件接收机的跟踪通道信号统计分析可用于接收机算法的测试与比对以及卫星信号性能的分析与评估.这里搭建了GPS软件接收机L1中频数字信号处理平台,对跟踪通道输出的I、Q支路信号进行了均值、标准方差以及均方根(RMS)统计.分析了各统计值与通道对应卫星的高度角、信号强度以及噪声之间的关系.基于统计结果提出了一种估计信道信噪比的方法.最后比较了不同信号采样频率对相关三角形和导航定位解算精度的影响. 相似文献
4.
5.
6.
为满足组合导航系统在高动态环境下的性能要求,设计基于矢量跟踪的GNSS/SINS相干深组合导航方法。利用矢量跟踪环路将所有可视卫星的跟踪和导航解算融为一体,增强通道间的辅助;高动态对载波跟踪影响更大,在通道预滤波中将码环载波环分别用独立的滤波器处理,组合滤波中采用通道间差分降低滤波状态维数,提高计算效率。引入惯导的加速度辅助本地信号参数预测,较精确地测量卫星视线方向的加速度,减小接收机在高动态时段的剩余动态,提高本地信号参数的预测精度。基于矢量跟踪软件接收机搭建相干深组合仿真系统,实验表明该方法在高动态等环境下能提高信号跟踪性能,改善系统的精度、可靠性。 相似文献
7.
多径的存在会给全球导航卫星系统的接收机带来较大的定位误差。因此,高精度的接收机须对多径信号进行抑制。针对目前常用的多径抑制方法的优缺点,提出了一种基于多门延迟和曲线拟合的多径抑制方法。该方法通过多门延迟来重塑伪码的自相关函数,用于找到直射信号的伪码真实位置和接收机码跟踪环路鉴别结果之间的偏差,进一步通过曲线拟合方法更加精确地计算出该偏差,最后将该偏差通过开环方法补偿给伪距计算,使得接收机在不改变环路跟踪性能和抗动态干扰性能的前提下实现定位性能的提升。仿真结果表明新算法在前端带宽的影响下对短、中长多径均能进行有效地抑制。 相似文献
8.
传统的基于硬件的接收机由于芯片的封装性很难用来进行通道信号的分析研究,而基于软件无线电技术的软件接收机则很容易做到。软件接收机的跟踪通道信号统计分析可用于接收机算法的测试与比对以及卫星信号性能的分析与评估。这里搭建了GPS软件接收机L1中频数字信号处理平台,对跟踪通道输出的I、Q支路信号进行了均值、标准方差以及均方根(RMS)统计。分析了各统计值与通道对应卫星的高度角、信号强度以及噪声之间的关系。基于统计结果提出了一种估计信道信噪比的方法。最后比较了不同信号采样频率对相关三角形和导航定位解算精度的影响。 相似文献
9.
10.
11.
In the design of a global navigation satellite system receiver, the tracking performance depends on the code tracking loop
and the associated discriminator. An adaptive code discriminator under a multi-correlator architecture has been designed based
on a multi-objective principle to achieve a balance among various, sometimes conflicting, design objectives. With the proposed
optimization approach and adaptive logic, concerns of large pull-in region and small steady-state error can be addressed.
The proposed scheme is implemented in a digital signal processor/field programmable gate array board and an experiment is
conducted to process GIOVE-A signals. The test results reveal the advantages of the proposed code tracking architecture and
discriminator design. 相似文献
12.
以GPS为代表的卫星导航系统受定位精度的约束,需外加在地面的伪卫星提供辅助定位信息,确保定位精度。提出了基于软件无线电思想的伪卫星接收机基带部分的设计方案,同时给出了三种硬件实现方式:(1)基于DSP的硬件实现;(2)基于FPGA的硬件实现;(3)基于ACM的硬件实现。同时针对这三种实现方式从硬件资源,算法实现两个角度进行了比较。 相似文献
13.
14.
The location requirements for emergency callers outside urban areas can hardly be fulfilled without global navigation satellite
systems (GNSS). Consequently, interest in positioning techniques based on use of a GNSS such as GPS or on the cellular network
infrastructure itself is growing rapidly in the mobile-telephone community. Moreover, the increasing demand for commercial
location-based services (LBS) has driven cellular-phone and network manufacturers to focus on positioning solutions which
are even more accurate than the regulatory mandates for positioning of emergency callers. One example of these upcoming LBS
is our PARAMOUNT project, which aims at improving user-friendly info-mobility services for hikers and mountaineers by combining
wireless communications (GMTS), satellite navigation (GNSS) and geographic information systems (GIS), based on a mobile client/server
architecture. The availability of mobile phones or PDAs with combined GNSS and cellular network-based wireless communication
on a high integration level is one primary demand of such LBS applications. Based on this, we will give some initial answers
to the question of whether mobile handset architecture synergies exist for the combination of GNSS with wireless location
in CDMA cellular wireless networks. In order to identify synergies, we will outline similarities and differences between wireless
communication and satellite navigation. In this respect, we pay particular attention to the so-called RAKE receiver architecture
employed in mobile CDMA cellular handsets. Our initial investigations will show that the RAKE receiver architecture, on which
mobile CDMA cellular handsets are based, will most likely be the one most suitable for achieving synergies between the two
positioning techniques within the same mobile handset architecture. Consequently, several receiver components could be used
to handle both types of signals (navigation and communications), resulting in a reduction of manufacturing costs and in a
decrease in energy consumption.
Electronic Publication 相似文献
15.
16.
Youssef Tawk Cyril Botteron Aleksandar Jovanovic Pierre-André Farine 《GPS Solutions》2012,16(2):243-258
The world of global navigation satellite systems has been enhanced with several new or improved signals in space aiming to
optimize accuracy, reliability, navigation solution, and interoperability between different constellations. However, such
developments bring various challenges to the receivers’ designers. For example, acquisition and tracking stages turn into
more complex processes while handling the increasing bandwidth requires additional processing power. In this context, we study
the code tracking of Galileo E5ab in a full band or of only one of its components, i.e., either E5a or E5b. More specifically,
an architecture for tracking the E5 pilot channel as an AltBOC(15,10) or BPSK(10) modulation is introduced, and the performance
of well-known discriminator types is analyzed using analytical derivations and simulations of linearity and stability regions,
thermal noise tracking errors, multipath error envelopes and tracking thresholds. Different parameters, such as the front-end
filter bandwidth, the early/late chip spacing, un-normalized and normalized discriminators, are taken into consideration.
The results obtained are used to illustrate the main advantages and drawbacks of tracking the E5 signal as well as to help
defining the main tracking loop parameters for an enhanced performance. 相似文献
17.
基于北斗双模工作模式,设计一种将全海深海洋装备的地理位置信息提供给母船或控制中心的定位与通信系统。提出使用卫星无线电导航业务RNSS模式进行定位,并将位置及待传输信息通过卫星无线电测定业务RDSS模式发送至接收模块;采用光敏、倾角和温度多传感器组合冗余实现海洋装备作业环境的全天候有效检测,进而通过单片机控制北斗模块的休眠与唤醒及北斗系统RDSS/RNSS模式间切换。定位测试试验和马里亚纳海沟海试结果表明,所设计的全海深定位与通信系统不仅具有很高的快速定位成功率,而且能够有效节约电池电量和实现短报文信息传输。 相似文献